Use llvm::reverse instead of `for (auto I = rbegin(), E = rend(); I != E; ++I)`
Reviewed By: #bolt, rafauler
Differential Revision: https://reviews.llvm.org/D140516
Linker might relax adrp + ldr got address loading to adrp + add for
local non-preemptible symbols (e.g. hidden/protected symbols in
executable). As usually linker doesn't change relocations properly after
relaxation, so we have to handle such cases by ourselves. To do that
during relocations reading we change LD64 reloc to ADD if instruction
mismatch found and introduce FixRelaxationPass that searches for ADRP+ADD
pairs and after performing some checks we're replacing ADRP target symbol
to already fixed ADDs one.
Vladislav Khmelevsky,
Advanced Software Technology Lab, Huawei
Differential Revision: https://reviews.llvm.org/D138097
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
Managed to introduce an error when changing code to fix other tests and the unit
test was no adequate due to --nostdlib being passed in in llvm testing
enviroment.
Original diff: https://reviews.llvm.org/D132059
Updated a test to make sure that original address and the new address are
different.
Reviewed By: maksfb, #bolt
Differential Revision: https://reviews.llvm.org/D132782
With ThinLTO mutliple CUs can share the same .debug_str_offsets contribution. We
were creating a new one for each CU. This lead to a binary size increase.
Reviewed By: maksfb
Differential Revision: https://reviews.llvm.org/D139214
Summary:
Changed contribution data structure to 64 bit. I added the 32bit and 64bit
accessors to make it explicit where we use 32bit and where we use 64bit. Also to
make sure sure we catch all the cases where this data structure is used.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch replaces NoneType() and NoneType::None with None in
preparation for migration from llvm::Optional to std::optional.
In the std::optional world, we are not guranteed to be able to
default-construct std::nullopt_t or peek what's inside it, so neither
NoneType() nor NoneType::None has a corresponding expression in the
std::optional world.
Once we consistently use None, we should even be able to replace the
contents of llvm/include/llvm/ADT/None.h with something like:
using NoneType = std::nullopt_t;
inline constexpr std::nullopt_t None = std::nullopt;
to ease the migration from llvm::Optional to std::optional.
Differential Revision: https://reviews.llvm.org/D138376
This patch adds the huge pages support (-hugify) for PIE/no-PIE
binaries. Also returned functionality to support the kernels < 5.10
where there is a problem in a dynamic loader with the alignment of
pages addresses.
Differential Revision: https://reviews.llvm.org/D129107
Currently pseudo probe encoding for a function is like:
- For the first probe, a relocation from it to its physical position in the code body
- For subsequent probes, an incremental offset from the current probe to the previous probe
The relocation could potentially cause relocation overflow during link time. I'm now replacing it with an offset from the first probe to the function start address.
A source function could be lowered into multiple binary functions due to outlining (e.g, coro-split). Since those binary function have independent link-time layout, to really avoid relocations from .pseudo_probe sections to .text sections, the offset to replace with should really be the offset from the probe's enclosing binary function, rather than from the entry of the source function. This requires some changes to previous section-based emission scheme which now switches to be function-based. The assembly form of pseudo probe directive is also changed correspondingly, i.e, reflecting the binary function name.
Most of the source functions end up with only one binary function. For those don't, a sentinel probe is emitted for each of the binary functions with a different name from the source. The sentinel probe indicates the binary function name to differentiate subsequent probes from the ones from a different binary function. For examples, given source function
```
Foo() {
…
Probe 1
…
Probe 2
}
```
If it is transformed into two binary functions:
```
Foo:
…
Foo.outlined:
…
```
The encoding for the two binary functions will be separate:
```
GUID of Foo
Probe 1
GUID of Foo
Sentinel probe of Foo.outlined
Probe 2
```
Then probe1 will be decoded against binary `Foo`'s address, and Probe 2 will be decoded against `Foo.outlined`. The sentinel probe of `Foo.outlined` makes sure there's not accidental relocation from `Foo.outlined`'s probes to `Foo`'s entry address.
On the BOLT side, to be minimal intrusive, the pseudo probe re-encoding sticks with the old encoding format. This is fine since unlike linker, Bolt processes the pseudo probe section as a whole and it is free from relocation overflow issues.
The change is downwards compatible as long as there's no mixed use of the old encoding and the new encoding.
Reviewed By: wenlei, maksfb
Differential Revision: https://reviews.llvm.org/D135912
Differential Revision: https://reviews.llvm.org/D135914
Differential Revision: https://reviews.llvm.org/D136394
mold linker creates symbols for PLT entries and that caught BOLT by
surprise. Add the support for marked PLT entries.
Fixes: #58498
Reviewed By: yota9
Differential Revision: https://reviews.llvm.org/D136655
We noticed some binaries with duplicated global symbol
entries (same name, address and size). Ignore them as it is possibly a
bug in the linker, and continue processing, unless the symbol has a
different size or address.
Reviewed By: #bolt, maksfb
Differential Revision: https://reviews.llvm.org/D136122
Calling registerName() for the same symbol twice, even with a different
size, has no effect other than the lookup overhead. Avoid the
redundancy.
Fixesfacebookincubator/BOLT#299
Reviewed By: Amir
Differential Revision: https://reviews.llvm.org/D136115
Simplify the logic of handling sections in BOLT. This change brings more
direct and predictable mapping of BinarySection instances to sections in
the input and output files.
* Only sections from the input binary will have a non-null SectionRef.
When a new section is created as a copy of the input section,
its SectionRef is reset to null.
* RewriteInstance::getOutputSectionName() is removed as the section name
in the output file is now defined by BinarySection::getOutputName().
* Querying BinaryContext for sections by name uses their original name.
E.g., getUniqueSectionByName(".rodata") will return the original
section even if the new .rodata section was created.
* Input file sections (with relocations applied) are emitted via MC with
".bolt.org" prefix. However, their name in the output binary is
unchanged unless a new section with the same name is created.
* New sections are emitted internally with ".bolt.new" prefix if there's
a name conflict with an input file section. Their original name is
preserved in the output file.
* Section header string table is properly populated with section names
that are actually used. Previously we used to include discarded
section names as well.
* Fix the problem when dynamic relocations were propagated to a new
section with a name that matched a section in the input binary.
E.g., the new .rodata with jump tables had dynamic relocations from
the original .rodata.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D135494
This adds a round of checks to memory references, looking for
incorrect references to jump table objects. Fix them by replacing the
jump table reference with another object reference + offset.
This solves bugs related to regular data references in code
accidentally being bound to a jump table, and this reference being
updated to a new (incorrect) location because we moved this jump
table.
Fixes#55004
Reviewed By: #bolt, maksfb
Differential Revision: https://reviews.llvm.org/D134098
When BOLT updates .eh_frame section, it concatenates newly-generated
contents (from CFI directives) with the original .eh_frame that has
relocations applied to it. However, if no new content is generated,
the original .eh_frame has to be left intact. In that case, BOLT was
still writing out the relocatable copy of the original .eh_frame section
to the new segment, even though this copy was never used and was not
even marked in the section header table.
Detect the scenario above and skip allocating extra space for .eh_frame.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D135223
To properly set the "_end" symbol, we need to track the last allocatable
address. Simply emitting "_end" at the end of some section is not
sufficient since the order of section allocation is unknown during the
emission step.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D135121
We can emit a binary without a new text section. Hence, the text section
assertion is not needed.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D135120
In lite mode, BOLT only transforms a subset of functions, leave the
remaining functions intact.
For NoPIC, it is fine. BOLT can scan relocations and fix-up all refs
that point to any function body in the subset.
For no-split function PIC, it is fine. Since jump tables are intra-
procedural transfer, BOLT can find both the jump table base and the
target within same function. Thus, BOLT can update and/or move jump
tables.
However, it is wrong to process a subset of functions in split function
PIC. This is because BOLT does not know if functions in the subset are
isolated, i.e., cannot be accessed by functions out of the subset,
especially via split jump table.
For example, BOLT only process three functions A, B and C. Suppose that
A is reached via jump table from A.cold, which is not processed. When
A is moved (due to optimization), the jump table in A.cold is invalid.
We cannot fix-up this jump table since it is only recognized in A.cold,
which BOLT does not process.
Solution: Disable lite mode if split function is present.
Future improvement: In lite mode, if split function is found, BOLT
processes both functions in the subset and all of their sibling
fragments.
Test Plan:
```
ninja check-bolt
```
Reviewed By: Amir, maksfb
Differential Revision: https://reviews.llvm.org/D131283
This does *not* link with libLLVM, but with static archives instead. Not
super-great, but at least the build works, which is probably better than
failing.
Related to #57551
Differential Revision: https://reviews.llvm.org/D134434
In perf2bolt and `-aggregate-only` BOLT mode, the output profile file is written
in fdata format by default. Provide a knob `-profile-format=[fdata,yaml]` to
control the format.
Note that `-w` option still dumps in YAML format.
Reviewed By: #bolt, maksfb
Differential Revision: https://reviews.llvm.org/D133995
This patch fixes warnings during a release build:
mlir/lib/Dialect/Transform/IR/TransformInterfaces.cpp:198:52: error:
lambda capture 'this' is not used [-Werror,-Wunused-lambda-capture]
bolt/lib/Rewrite/RewriteInstance.cpp:5318:18: error: unused variable
'HasNoAddress' [-Werror,-Wunused-variable]
When we derive EFMM from SectionMemoryManager, it brings into EFMM extra
functionality, such as the registry of exception handling sections,
page permission management, etc. Such functionality is of no use to
llvm-bolt and can even be detrimental (see
https://github.com/llvm/llvm-project/issues/56726).
Change the base class of ExecutableFileMemoryManager to MemoryManager,
avoid registering EH sections, and skip memory finalization.
Fixes#56726
Reviewed By: yota9
Differential Revision: https://reviews.llvm.org/D133994
We were trying to process .debug_addr for CU that doesn't have it. This resulted
in assert. Example came from GCC that also doesn't use DW_OP_addrx in
DW_FORM_exprloc.
Reviewed By: maksfb
Differential Revision: https://reviews.llvm.org/D132422
To generate all symbols correctly, it is necessary to record the address
of each fragment. This patch moves the address info for the main and
cold fragments from BinaryFunction to FunctionFragment, where this data
is recorded for all fragments.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132051
This changes `FunctionFragment` from being used as a temporary proxy
object to access basic block ranges to a heap-allocated object that can
store fragment-specific information.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132050
A const-qualified reference to function layout allows accessing
non-const qualified basic blocks on a const-qualified function. This
patch adds or removes const-qualifiers where necessary to indicate where
basic blocks are used in a non-const manner.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132049
To generate all symbols correctly, it is necessary to record the address
of each fragment. This patch moves the address info for the main and
cold fragments from BinaryFunction to FunctionFragment, where this data
is recorded for all fragments.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132051
This changes `FunctionFragment` from being used as a temporary proxy
object to access basic block ranges to a heap-allocated object that can
store fragment-specific information.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132050
A const-qualified reference to function layout allows accessing
non-const qualified basic blocks on a const-qualified function. This
patch adds or removes const-qualifiers where necessary to indicate where
basic blocks are used in a non-const manner.
Reviewed By: rafauler
Differential Revision: https://reviews.llvm.org/D132049
