This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
std::optional::value() has undesired exception checking semantics and is
unavailable in some older Xcode. The call sites block std::optional migration.
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Because Host::RunShellCommand runs commands through $SHELL there is an
opportunity for this to fail spectacularly on systems that use custom
shells with odd behaviors. This patch makes these situations easier to
debug by at least logging the result of the failed xcrun invocation.
It also doesn't run xcrun through a shell any more.
rdar://102389438
Differential Revision: https://reviews.llvm.org/D138060
Use `break 0x5` for LoongArch software breakpoint traps.
The magic number 0x5 means `BRK_SSTEPBP` as defined in
the kernel header `asm/break.h` on LoongArch.
Reviewed By: SixWeining, xen0n
Differential Revision: https://reviews.llvm.org/D137519
There are conditionalized calls to an SPI in HostInfoMacOSX.mm
to test if lldb is being built against a pre-macOS 10.12 SDK,
or being run on a pre-macOS 10.12 system. macOS 10.12 was released
six years ago, and I don't know of any active users of this system
so let's remove the checks.
Differential Revision: https://reviews.llvm.org/D136900
rdar://101652340
If lots of pending callbacks are added while the main loop has exited
already, the trigger pipe buffer fills in, causing the write to fail
and the related assertion to fail. To avoid this, add a boolean member
indicating whether the callbacks have been triggered already.
If the trigger was done, avoid writing to the pipe until loops proceeds
to run them and resets the variable.
Besides fixing the issue, this also avoids writing to the pipe multiple
times if callbacks are added faster than the loop is able to process
them. Previously, this would lead to the loop performing multiple read
iterations from pipe unnecessarily.
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.llvm.org/D135516
All callers were either assuming their pointer was not null before calling
this, or checking beforehand.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D135668
Most of the paths to this never passed nullptr intentionally. Those
that possibly could have were assuming it was not null elsehwere,
so would have crashed.
I've added asserts in those cases.
At least one case was relying on GetAsMemoryData to return an error
when it was given nullptr. So I've hoisted that error setting code
out into the caller.
Depends on D134963
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D134965
Uses our existing "error string" extension to provide a better
indication of why the launch failed (the client does not make use of the
error yet).
Also, fix the way we obtain the launch error message (make sure we read
the whole message, and skip trailing garbage), and reduce the size of
TestLldbGdbServer by splitting some tests into a separate file.
Differential Revision: https://reviews.llvm.org/D133352
LLVM contains a helpful function for getting the size of a C-style
array: `llvm::array_lengthof`. This is useful prior to C++17, but not as
helpful for C++17 or later: `std::size` already has support for C-style
arrays.
Change call sites to use `std::size` instead.
Differential Revision: https://reviews.llvm.org/D133501
This will be used as a replacement for selecting over a pipe fd, which
does not work on windows. The posix implementation still uses a pipe
under the hood, while the windows version uses windows event handles.
The idea is that, instead of writing to a pipe, one just inserts a
callback, which does whatever you wanted to do after the bytes come out
the read end of the pipe.
Differential Revision: https://reviews.llvm.org/D131160
Previously, depending on how you constructed a UUID from data or a
StringRef, an input value of all zeros was valid (e.g. setFromData)
or not (e.g. setFromOptionalData). Since there was no way to tell
which interpretation to use, it was done somewhat inconsistently.
This standardizes the meaning of a UUID of all zeros to Not Valid,
and removes all the Optional methods and their uses, as well as the
static factories that supported them.
Differential Revision: https://reviews.llvm.org/D132191
This fixes a warning when building for Windows:
../tools/lldb/source/Host/common/TCPSocket.cpp:297:16: warning: comparison of integers of different signs: 'int' and 'const NativeSocket' (aka 'const unsigned long long') [-Wsign-compare]
if (sock != kInvalidSocketValue) {
~~~~ ^ ~~~~~~~~~~~~~~~~~~~
Differential Revision: https://reviews.llvm.org/D132841
Use this instead of `*_LIBDIR_SUFFIX`, from which it is computed.
This gets us ready for D130586, in which `*_LIBDIR_SUFFIX` is
deprecated.
Differential Revision: https://reviews.llvm.org/D132300
This patch switches the MainLoop class to use the WSAEventSelect
mechanism to wait for multiple sockets to become readable. The
motivation for doing that is that this allows us to wait for other kinds
of events as well (as long as they can be converted to WSAEvents). This
will allow us to avoid (abstract away) pipe-based multiplexing
mechanisms in the generic code, since pipes cannot be combined with
sockets on windows.
Since the windows implementation will now look completely different than
the posix (file descriptor-based) implementations, I have split the
MainLoop class into two (MainLoopPosix and MainLoopWindows), with the
common code going into MainLoopBase.
Differential Revision: https://reviews.llvm.org/D131159
We held off on this before as `LLVM_LIBDIR_SUFFIX` conflicted with it.
Now we return this.
`LLVM_LIBDIR_SUFFIX` is kept as a deprecated way to set
`CMAKE_INSTALL_LIBDIR`. The other `*_LIBDIR_SUFFIX` are just removed
entirely.
I imagine this is too potentially-breaking to make LLVM 15. That's fine.
I have a more minimal version of this in the disto (NixOS) patches for
LLVM 15 (like previous versions). This more expansive version I will
test harder after the release is cut.
Reviewed By: sebastian-ne, ldionne, #libc, #libc_abi
Differential Revision: https://reviews.llvm.org/D130586
Suppress coverity false positives.
This diff contains comments only, including the hints for Coverity static code inspection
to suppress the warning originating at the next line after the comment.
Differential Revision: https://reviews.llvm.org/D131998
Added:
- Take RISC-V `ebreak` instruction as breakpoint trap code, so our breakpoint works as expected now.
Further work:
- RISC-V does not support hardware single stepping yet. A software implementation may come in future PR.
- Add support for RVC extension (the trap code, etc.).
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D131566
This patch is based on the minimal extract of D128250.
What is implemented:
- Use the same register layout as Linux kernel and mock read/write for `x0` register (the always zero register).
- Refactor some duplicate code, and delete unused register definitions.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D130342
Patch the following issues found by static code inspection:
- Unchecked return values from lib calls
- Passing potentially negative arg into a function that requires non-negative input
- Possible socket double-close
Differential Revision: https://reviews.llvm.org/D131294
Make LLDB resilient against failing dyld introspection SPIs:
- dyld_process_create_for_current_task
- dyld_process_snapshot_create_for_process
- dyld_process_snapshot_get_shared_cache
These can all fail and return a nullptr. Instead of having an assert,
which doesn't really make sense, as we have no control over whether
these calls succeed or not, bail out gracefully and use the fallback
logic.
rdar://98070414
Differential revision: https://reviews.llvm.org/D131110
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
Add a log dump command to dump logs to a file. This only works for
channels that have a log handler associated that supports dumping. For
now that's limited to the circular log handler, but more could be added
in the future.
Differential revision: https://reviews.llvm.org/D128557
