Following support from the previous patches in this stack being added for
variadic DBG_INSTR_REFs to exist, this patch modifies LiveDebugValues to
handle those instructions. Support already exists for DBG_VALUE_LISTs, which
covers most of the work needed to handle these instructions; this patch only
modifies the transferDebugInstrRef function to correctly track them.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D133927
Prior to this patch, variadic DIExpressions (i.e. ones that contain
DW_OP_LLVM_arg) could only be created by salvaging debug values to create
stack value expressions, resulting in a DBG_VALUE_LIST being created. As of
the previous patch in this patch stack, DBG_INSTR_REF's syntax has been
changed to match DBG_VALUE_LIST in preparation for supporting variadic
expressions. This patch adds some minor changes needed to allow variadic
expressions that aren't stack values to exist, and allows variadic expressions
that are trivially reduceable to non-variadic expressions to be handled
similarly to non-variadic expressions.
Reviewed by: jmorse
Differential Revision: https://reviews.llvm.org/D133926
This change removes the `tidyLandingPads` function, which previously
had a few responsibilities:
1. Dealing with the deletion of an invoke, after MachineFunction lowering.
2. Dealing with the deletion of a landing pad BB, after MachineFunction lowering.
3. Cleaning up the type-id list generated by `MachineFunction::addLandingPad`.
Case 3 has been fixed in the generator, and the others are now handled
during table emission.
This change also removes `MachineFunction`'s `addCatchTypeInfo`,
`addFilterTypeInfo`, and `addCleanup` helper fns, as they had a single
caller, and being outlined didn't make it simpler.
Finally, as calling `tidyLandingPads` was effectively the only thing
`DwarfCFIExceptionBase` did, that class has been eliminated.
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
The field is currently `void*`, which was originlly chosen in 2010 to not need to include `DenseMap`. Since then, `DenseMap` has been included in the header file anyways, so there is no more need to for the indirection via `void*` and the cruft around it can be removed.
Differential Revision: https://reviews.llvm.org/D140758
This patch fixes a simple bug where `DbgValueHistoryMap::hasNonEmptyLocation` was incorrectly handling DBG_VALUE_LIST instructions, treating empty values as non-empty, causing empty variables to be emitted into DWARF.
Reviewed By: Orlando
Differential Revision: https://reviews.llvm.org/D133925
This patch fixes a simple bug in DbgValueHistoryMap::hasNonEmptyLocation
that caused it to treat empty DBG_VALUE_LIST instructions as non-empty
when determining whether to emit a variable or not.
Differential Revision: https://reviews.llvm.org/D133925
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
This patch adds a new function that can be used to check all the
properties, other than the machine values, of a pair of debug values for
equivalence. This is done by folding the "directness" into the
expression, converting the expression to variadic form if it is not
already in that form, and then comparing directly. In a few places which
check whether two debug values are identical to see if their ranges can
be merged, this function will correctly identify cases where two debug
values are expressed differently but have the same meaning, allowing
those ranges to be correctly merged.
Differential Revision: https://reviews.llvm.org/D136173
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This fixes LLVMMIRParser, LLVMGlobalISel, LLVMAsmPrinter, LLVMSelectionDAG.
**Summary**
Starting with DWARFv5, DW_AT_default_value can be used to indicate
that a template argument has a default value. With this patch LLVM
will emit the this attribute earlier versions of DWARF, unless
compiling with -gstrict-dwarf.
Differential Revision: https://reviews.llvm.org/D139953
We identify epilogue code by looking for instructions tagged
with FrameDestroy.
A function may have more than one epilogue, e.g., because of early
returns or code duplicated during optimization. We need only track
the current block, and emit epilogie_begin at most once per block.
We reduce the number of entries in the line table by combining
epilogue_begin with other flags instead of emitting a separate
entry just for epilogue_begin.
Reviewed By: dblaikie, aprantl
Differential Revision: https://reviews.llvm.org/D133376
`DEBUG_VALUE` comments are printed before an instruction, so they are
not printed with `AddComment` method as other comments are, but printed
using `emitRawComment` method. But currently `emitDebugValueComment`
calls `emitRawComment` twice for target-index-based `DBG_VALUE`s: once
in the `switch`-`case`,
d77ae7f251/llvm/lib/CodeGen/AsmPrinter/AsmPrinter.cpp (L1192-L1193)
and again at the end of the method:
d77ae7f251/llvm/lib/CodeGen/AsmPrinter/AsmPrinter.cpp (L1227-L1228)
This makes them printed twice. I think this happened through multiple
commits modifying and refactoring this method.
Reviewed By: dschuff
Differential Revision: https://reviews.llvm.org/D139579
Next patch after D139548 and D139439. Same expectations, the change seems safe with as far as llvm goes, we cannot check downstream implementations.
Differential Revision: https://reviews.llvm.org/D139614
In the same vein as D139439, the patch is not NFC as there is no way to check all downstream implementations but the patch seems pretty safe.
Differential Revision: https://reviews.llvm.org/D139548
Before performing this change, I checked that `ByteAlignment` was never `0` inside `MCAsmStreamer:emitZeroFill` and `MCAsmStreamer::emitLocalCommonSymbol`.
I believe it is NFC as `0` values are illegal in `emitZeroFill` anyways, `Log2(ByteAlignment)` would be undefined.
And currently, all calls to `emitLocalCommonSymbol` are provably `>0`.
Differential Revision: https://reviews.llvm.org/D139439
This breaks Windows bots with
`warning C4334: '<<': result of 32-bit shift implicitly converted to 64 bits (was 64-bit shift intended?)`
Some shift operators are lacking a proper literal unit ('1ULL' instead of
'1'). Will reland once fixed.
This reverts commit c621c1a8e8.
Before performing this change, I checked that `ByteAlignment` was never `0` inside `MCAsmStreamer:emitZeroFill` and `MCAsmStreamer::emitLocalCommonSymbol`.
I believe it is NFC as `0` values are illegal in `emitZeroFill` anyways, `Log2(ByteAlignment)` would be undefined.
And currently, all calls to `emitLocalCommonSymbol` are provably `>0`.
Differential Revision: https://reviews.llvm.org/D139439
Let Propeller use specialized IDs for basic blocks, instead of MBB number.
This allows optimizations not just prior to asm-printer, but throughout the entire codegen.
This patch only implements the functionality under the new `LLVM_BB_ADDR_MAP` version, but the old version is still being used. A later patch will change the used version.
####Background
Today Propeller uses machine basic block (MBB) numbers, which already exist, to map native assembly to machine IR. This is done as follows.
- Basic block addresses are captured and dumped into the `LLVM_BB_ADDR_MAP` section just before the AsmPrinter pass which writes out object files. This ensures that we have a mapping that is close to assembly.
- Profiling mapping works by taking a virtual address of an instruction and looking up the `LLVM_BB_ADDR_MAP` section to find the MBB number it corresponds to.
- While this works well today, we need to do better when we scale Propeller to target other Machine IR optimizations like spill code optimization. Register allocation happens earlier in the Machine IR pipeline and we need an annotation mechanism that is valid at that point.
- The current scheme will not work in this scenario because the MBB number of a particular basic block is not fixed and changes over the course of codegen (via renumbering, adding, and removing the basic blocks).
- In other words, the volatile MBB numbers do not provide a one-to-one correspondence throughout the lifetime of Machine IR. Profile annotation using MBB numbers is restricted to a fixed point; only valid at the exact point where it was dumped.
- Further, the object file can only be dumped before AsmPrinter and cannot be dumped at an arbitrary point in the Machine IR pass pipeline. Hence, MBB numbers are not suitable and we need something else.
####Solution
We propose using fixed unique incremental MBB IDs for basic blocks instead of volatile MBB numbers. These IDs are assigned upon the creation of machine basic blocks. We modify `MachineFunction::CreateMachineBasicBlock` to assign the fixed ID to every newly created basic block. It assigns `MachineFunction::NextMBBID` to the MBB ID and then increments it, which ensures having unique IDs.
To ensure correct profile attribution, multiple equivalent compilations must generate the same Propeller IDs. This is guaranteed as long as the MachineFunction passes run in the same order. Since the `NextBBID` variable is scoped to `MachineFunction`, interleaving of codegen for different functions won't cause any inconsistencies.
The new encoding is generated under the new version number 2 and we keep backward-compatibility with older versions.
####Impact on Size of the `LLVM_BB_ADDR_MAP` Section
Emitting the Propeller ID results in a 23% increase in the size of the `LLVM_BB_ADDR_MAP` section for the clang binary.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D100808
CodeView doesn't have the ability to represent variables
in other ways than as in registers or memory values, but
LLVM very often transforms simple values into constants,
consider this program:
int f () { int i = 123; return i; }
LLVM will transform `i` into a constant value and just
leave behind a llvm.dbg.value, this can't be represented
as a S_LOCAL record in CodeView. But we can represent it
as a S_CONSTANT record.
This patch checks if the location of a debug value is null,
then we will insert a S_CONSTANT record instead of a S_LOCAL
value with the flag "OptimizedAway".
In lld we then output the S_CONSTANT in the right scope, before
they where always inserted in the global stream, now we check
the scope before inserting it.
This has shown to improve debugging for our developers
internally.
Fixes to llvm/llvm-project#55958
Reviewed By: aganea
Differential Revision: https://reviews.llvm.org/D138995
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
With D135642 ignoring unregistered symbols, isTransitiveUsedByMetadataOnly added
by D101512 is no longer needed (the operation is potentially slow). There is a
`.addrsig_sym` directive for an only-used-by-metadata symbol but it does not
emit an entry.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D138362
This patch is the Part-2 (BE LLVM) implementation of HW Exception handling.
Part-1 (FE Clang) was committed in 797ad70152.
This new feature adds the support of Hardware Exception for Microsoft Windows
SEH (Structured Exception Handling).
Compiler options:
For clang-cl.exe, the option is -EHa, the same as MSVC.
For clang.exe, the extra option is -fasync-exceptions,
plus -triple x86_64-windows -fexceptions and -fcxx-exceptions as usual.
NOTE:: Without the -EHa or -fasync-exceptions, this patch is a NO-DIFF change.
The rules for C code:
For C-code, one way (MSVC approach) to achieve SEH -EHa semantic is to follow three rules:
First, no exception can move in or out of _try region., i.e., no "potential faulty
instruction can be moved across _try boundary.
Second, the order of exceptions for instructions 'directly' under a _try must be preserved
(not applied to those in callees).
Finally, global states (local/global/heap variables) that can be read outside of _try region
must be updated in memory (not just in register) before the subsequent exception occurs.
The impact to C++ code:
Although SEH is a feature for C code, -EHa does have a profound effect on C++
side. When a C++ function (in the same compilation unit with option -EHa ) is
called by a SEH C function, a hardware exception occurs in C++ code can also
be handled properly by an upstream SEH _try-handler or a C++ catch(...).
As such, when that happens in the middle of an object's life scope, the dtor
must be invoked the same way as C++ Synchronous Exception during unwinding process.
Design:
A natural way to achieve the rules above in LLVM today is to allow an EH edge
added on memory/computation instruction (previous iload/istore idea) so that
exception path is modeled in Flow graph preciously. However, tracking every
single memory instruction and potential faulty instruction can create many
Invokes, complicate flow graph and possibly result in negative performance
impact for downstream optimization and code generation. Making all
optimizations be aware of the new semantic is also substantial.
This design does not intend to model exception path at instruction level.
Instead, the proposed design tracks and reports EH state at BLOCK-level to
reduce the complexity of flow graph and minimize the performance-impact on CPP
code under -EHa option.
One key element of this design is the ability to compute State number at
block-level. Our algorithm is based on the following rationales:
A _try scope is always a SEME (Single Entry Multiple Exits) region as jumping
into a _try is not allowed. The single entry must start with a seh_try_begin()
invoke with a correct State number that is the initial state of the SEME.
Through control-flow, state number is propagated into all blocks. Side exits
marked by seh_try_end() will unwind to parent state based on existing SEHUnwindMap[].
Note side exits can ONLY jump into parent scopes (lower state number).
Thus, when a block succeeds various states from its predecessors, the lowest
State triumphs others. If some exits flow to unreachable, propagation on those
paths terminate, not affecting remaining blocks.
For CPP code, object lifetime region is usually a SEME as SEH _try.
However there is one rare exception: jumping into a lifetime that has Dtor but
has no Ctor is warned, but allowed:
Warning: jump bypasses variable with a non-trivial destructor
In that case, the region is actually a MEME (multiple entry multiple exits).
Our solution is to inject a eha_scope_begin() invoke in the side entry block to
ensure a correct State.
Implementation:
Part-1: Clang implementation (already in):
Please see commit 797ad70152).
Part-2 : LLVM implementation described below.
For both C++ & C-code, the state of each block is computed at the same place in
BE (WinEHPreparing pass) where all other EH tables/maps are calculated.
In addition to _scope_begin & _scope_end, the computation of block state also
rely on the existing State tracking code (UnwindMap and InvokeStateMap).
For both C++ & C-code, the state of each block with potential trap instruction
is marked and reported in DAG Instruction Selection pass, the same place where
the state for -EHsc (synchronous exceptions) is done.
If the first instruction in a reported block scope can trap, a Nop is injected
before this instruction. This nop is needed to accommodate LLVM Windows EH
implementation, in which the address in IPToState table is offset by +1.
(note the purpose of that is to ensure the return address of a call is in the
same scope as the call address.
The handler for catch(...) for -EHa must handle HW exception. So it is
'adjective' flag is reset (it cannot be IsStdDotDot (0x40) that only catches
C++ exceptions).
Suppress push/popTerminate() scope (from noexcept/noTHrow) so that HW
exceptions can be passed through.
Original llvm-dev [RFC] discussions can be found in these two threads below:
https://lists.llvm.org/pipermail/llvm-dev/2020-March/140541.htmlhttps://lists.llvm.org/pipermail/llvm-dev/2020-April/141338.html
Differential Revision: https://reviews.llvm.org/D102817/new/
Extends the Asm reader/writer to support reading and writing the
'.memtag' directive (including allowing it on internal global
variables). Also add some extra tooling support, including objdump and
yaml2obj/obj2yaml.
Test that the sanitize_memtag IR attribute produces the expected asm
directive.
Uses the new Aarch64 MemtagABI specification
(https://github.com/ARM-software/abi-aa/blob/main/memtagabielf64/memtagabielf64.rst)
to identify symbols as tagged in object files. This is done using a
R_AARCH64_NONE relocation that identifies each tagged symbol, and these
relocations are tagged in a special SHT_AARCH64_MEMTAG_GLOBALS_STATIC
section. This signals to the linker that the global variable should be
tagged.
Reviewed By: fmayer, MaskRay, peter.smith
Differential Revision: https://reviews.llvm.org/D128958
This patch makes code less readable but it will clean itself after all functions are converted.
Differential Revision: https://reviews.llvm.org/D138665
The existing behaviors and callbacks were overlapping and had very
confusing semantics: beginBasicBlock/endBasicBlock were not always
called, beginFragment/endFragment seemed like they were meant to mean
the same thing, but were slightly different, etc. This resulted in
confusing semantics, virtual method overloads, and control flow.
Remove the above, and replace with new beginBasicBlockSection and
endBasicBlockSection callbacks. And document them.
These are always called before the first and after the last blocks in
a function, even when basic-block-sections are disabled.
Previously, we used SHA-1 for hashing the CodeView type records.
SHA-1 in `GloballyHashedType::hashType()` is coming top in the profiles. By simply replacing with BLAKE3, the link time is reduced in our case from 15 sec to 13 sec. I am only using MSVC .OBJs in this case. As a reference, the resulting .PDB is approx 2.1GiB and .EXE is approx 250MiB.
Differential Revision: https://reviews.llvm.org/D137101
basic block section cases
MachineBlockPlacement pass sets an alignment attribute to the loop
header MBB and this attribute will lead to an alignment directive during
emitting asm. In the case of the basic block section, the alignment
directive is put before the section label, and thus the alignment is set
to the predecessor of the loop header, which is not what we expect and
increases the code size (both inserting nop and set section alignment).
Reviewed By: rahmanl
Differential Revision: https://reviews.llvm.org/D137535
As discussed in https://reviews.llvm.org/D136474 -fmessage-length
creates problems with reproduciability in the PDB files.
This patch just drops that argument when writing the PDB file.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D137322
Currently pseudo probe encoding for a function is like:
- For the first probe, a relocation from it to its physical position in the code body
- For subsequent probes, an incremental offset from the current probe to the previous probe
The relocation could potentially cause relocation overflow during link time. I'm now replacing it with an offset from the first probe to the function start address.
A source function could be lowered into multiple binary functions due to outlining (e.g, coro-split). Since those binary function have independent link-time layout, to really avoid relocations from .pseudo_probe sections to .text sections, the offset to replace with should really be the offset from the probe's enclosing binary function, rather than from the entry of the source function. This requires some changes to previous section-based emission scheme which now switches to be function-based. The assembly form of pseudo probe directive is also changed correspondingly, i.e, reflecting the binary function name.
Most of the source functions end up with only one binary function. For those don't, a sentinel probe is emitted for each of the binary functions with a different name from the source. The sentinel probe indicates the binary function name to differentiate subsequent probes from the ones from a different binary function. For examples, given source function
```
Foo() {
…
Probe 1
…
Probe 2
}
```
If it is transformed into two binary functions:
```
Foo:
…
Foo.outlined:
…
```
The encoding for the two binary functions will be separate:
```
GUID of Foo
Probe 1
GUID of Foo
Sentinel probe of Foo.outlined
Probe 2
```
Then probe1 will be decoded against binary `Foo`'s address, and Probe 2 will be decoded against `Foo.outlined`. The sentinel probe of `Foo.outlined` makes sure there's not accidental relocation from `Foo.outlined`'s probes to `Foo`'s entry address.
On the BOLT side, to be minimal intrusive, the pseudo probe re-encoding sticks with the old encoding format. This is fine since unlike linker, Bolt processes the pseudo probe section as a whole and it is free from relocation overflow issues.
The change is downwards compatible as long as there's no mixed use of the old encoding and the new encoding.
Reviewed By: wenlei, maksfb
Differential Revision: https://reviews.llvm.org/D135912
Differential Revision: https://reviews.llvm.org/D135914
Differential Revision: https://reviews.llvm.org/D136394
