This patch makes two notable changes to the MIR debug info representation,
which result in different MIR output but identical final DWARF output (NFC
w.r.t. the full compilation). The two changes are:
* The introduction of a new MachineOperand type, MO_DbgInstrRef, which
consists of two unsigned numbers that are used to index an instruction
and an output operand within that instruction, having a meaning
identical to first two operands of the current DBG_INSTR_REF
instruction. This operand is only used in DBG_INSTR_REF (see below).
* A change in syntax for the DBG_INSTR_REF instruction, shuffling the
operands to make it resemble DBG_VALUE_LIST instead of DBG_VALUE,
and replacing the first two operands with a single MO_DbgInstrRef-type
operand.
This patch is the first of a set that will allow DBG_INSTR_REF
instructions to refer to multiple machine locations in the same manner
as DBG_VALUE_LIST.
Reviewed By: jmorse
Differential Revision: https://reviews.llvm.org/D129372
value() has undesired exception checking semantics and calls
__throw_bad_optional_access in libc++. Moreover, the API is unavailable without
_LIBCPP_NO_EXCEPTIONS on older Mach-O platforms (see
_LIBCPP_AVAILABILITY_BAD_OPTIONAL_ACCESS).
This fixes LLVMMIRParser, LLVMGlobalISel, LLVMAsmPrinter, LLVMSelectionDAG.
Let Propeller use specialized IDs for basic blocks, instead of MBB number.
This allows optimizations not just prior to asm-printer, but throughout the entire codegen.
This patch only implements the functionality under the new `LLVM_BB_ADDR_MAP` version, but the old version is still being used. A later patch will change the used version.
####Background
Today Propeller uses machine basic block (MBB) numbers, which already exist, to map native assembly to machine IR. This is done as follows.
- Basic block addresses are captured and dumped into the `LLVM_BB_ADDR_MAP` section just before the AsmPrinter pass which writes out object files. This ensures that we have a mapping that is close to assembly.
- Profiling mapping works by taking a virtual address of an instruction and looking up the `LLVM_BB_ADDR_MAP` section to find the MBB number it corresponds to.
- While this works well today, we need to do better when we scale Propeller to target other Machine IR optimizations like spill code optimization. Register allocation happens earlier in the Machine IR pipeline and we need an annotation mechanism that is valid at that point.
- The current scheme will not work in this scenario because the MBB number of a particular basic block is not fixed and changes over the course of codegen (via renumbering, adding, and removing the basic blocks).
- In other words, the volatile MBB numbers do not provide a one-to-one correspondence throughout the lifetime of Machine IR. Profile annotation using MBB numbers is restricted to a fixed point; only valid at the exact point where it was dumped.
- Further, the object file can only be dumped before AsmPrinter and cannot be dumped at an arbitrary point in the Machine IR pass pipeline. Hence, MBB numbers are not suitable and we need something else.
####Solution
We propose using fixed unique incremental MBB IDs for basic blocks instead of volatile MBB numbers. These IDs are assigned upon the creation of machine basic blocks. We modify `MachineFunction::CreateMachineBasicBlock` to assign the fixed ID to every newly created basic block. It assigns `MachineFunction::NextMBBID` to the MBB ID and then increments it, which ensures having unique IDs.
To ensure correct profile attribution, multiple equivalent compilations must generate the same Propeller IDs. This is guaranteed as long as the MachineFunction passes run in the same order. Since the `NextBBID` variable is scoped to `MachineFunction`, interleaving of codegen for different functions won't cause any inconsistencies.
The new encoding is generated under the new version number 2 and we keep backward-compatibility with older versions.
####Impact on Size of the `LLVM_BB_ADDR_MAP` Section
Emitting the Propeller ID results in a 23% increase in the size of the `LLVM_BB_ADDR_MAP` section for the clang binary.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D100808
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This patch replaces those occurrences of NoneType that would trigger
an error if the definition of NoneType were missing in None.h.
To keep this patch focused, I am deliberately not replacing None with
std::nullopt in this patch or updating comments. They will be
addressed in subsequent patches.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
Differential Revision: https://reviews.llvm.org/D138539
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Relands 67504c9549 with a fix for
32-bit builds.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
The KCFI sanitizer, enabled with `-fsanitize=kcfi`, implements a
forward-edge control flow integrity scheme for indirect calls. It
uses a !kcfi_type metadata node to attach a type identifier for each
function and injects verification code before indirect calls.
Unlike the current CFI schemes implemented in LLVM, KCFI does not
require LTO, does not alter function references to point to a jump
table, and never breaks function address equality. KCFI is intended
to be used in low-level code, such as operating system kernels,
where the existing schemes can cause undue complications because
of the aforementioned properties. However, unlike the existing
schemes, KCFI is limited to validating only function pointers and is
not compatible with executable-only memory.
KCFI does not provide runtime support, but always traps when a
type mismatch is encountered. Users of the scheme are expected
to handle the trap. With `-fsanitize=kcfi`, Clang emits a `kcfi`
operand bundle to indirect calls, and LLVM lowers this to a
known architecture-specific sequence of instructions for each
callsite to make runtime patching easier for users who require this
functionality.
A KCFI type identifier is a 32-bit constant produced by taking the
lower half of xxHash64 from a C++ mangled typename. If a program
contains indirect calls to assembly functions, they must be
manually annotated with the expected type identifiers to prevent
errors. To make this easier, Clang generates a weak SHN_ABS
`__kcfi_typeid_<function>` symbol for each address-taken function
declaration, which can be used to annotate functions in assembly
as long as at least one C translation unit linked into the program
takes the function address. For example on AArch64, we might have
the following code:
```
.c:
int f(void);
int (*p)(void) = f;
p();
.s:
.4byte __kcfi_typeid_f
.global f
f:
...
```
Note that X86 uses a different preamble format for compatibility
with Linux kernel tooling. See the comments in
`X86AsmPrinter::emitKCFITypeId` for details.
As users of KCFI may need to locate trap locations for binary
validation and error handling, LLVM can additionally emit the
locations of traps to a `.kcfi_traps` section.
Similarly to other sanitizers, KCFI checking can be disabled for a
function with a `no_sanitize("kcfi")` function attribute.
Reviewed By: nickdesaulniers, kees, joaomoreira, MaskRay
Differential Revision: https://reviews.llvm.org/D119296
There are two different senses in which a block can be "address-taken".
There can be a BlockAddress involved, which means we need to map the
IR-level value to some specific block of machine code. Or there can be
constructs inside a function which involve using the address of a basic
block to implement certain kinds of control flow.
Mixing these together causes a problem: if target-specific passes are
marking random blocks "address-taken", if we have a BlockAddress, we
can't actually tell which MachineBasicBlock corresponds to the
BlockAddress.
So split this into two separate bits: one for BlockAddress, and one for
the machine-specific bits.
Discovered while trying to sort out related stuff on D102817.
Differential Revision: https://reviews.llvm.org/D124697
This wraps up from D119053. The 2 headers are moved as described,
fixed file headers and include guards, updated all files where the old
paths were detected (simple grep through the repo), and `clang-format`-ed it all.
Differential Revision: https://reviews.llvm.org/D119876
When parsing MachineMemOperands, MIRParser treated the "align" keyword
the same as "basealign". Really "basealign" should specify the
alignment of the MachinePointerInfo base value, and "align" should
specify the alignment of that base value plus the offset.
This worked OK when the specified alignment was no larger than the
alignment of the offset, but in cases like this it just caused
confusion:
STW killed %18, 4, %stack.1.ap2.i.i :: (store (s32) into %stack.1.ap2.i.i + 4, align 8)
MIRPrinter would never have printed this, with an offset of 4 but an
align of 8, so it must have been written by hand. MIRParser would
interpret "align 8" as "basealign 8", but I think it is better to give
an error and force the user to write "basealign 8" if that is what they
really meant.
Differential Revision: https://reviews.llvm.org/D120400
Change-Id: I7eeeefc55c2df3554ba8d89f8809a2f45ada32d8
IR:
- globals (and functions, ifuncs, aliases) can have a partition
- catchret has a `to` before the label
- the sint/int types do not exist
- signext comes after the type
- a variable was missing its type
TableGen:
- The second value after a `#` concatenation is optional
See e.g. llvm/lib/Target/X86/X86InstrAVX512.td:L3351
- IncludeDirective and PreprocessorDirective were never referenced in
the grammar
- Add some missing ;
- Parent classes of multiclasses can have generic arguments.
Reuse the `ParentClassList` that is already used in other places.
MIR:
- liveins only allows physical registers, which start with a $
Differential Revision: https://reviews.llvm.org/D116674
This reverts commit fd4808887e.
This patch causes gcc to issue a lot of warnings like:
warning: base class ‘class llvm::MCParsedAsmOperand’ should be
explicitly initialized in the copy constructor [-Wextra]
Expanding on D109750.
Since `DBG_VALUE` instructions have final register validity determined in
`LDVImpl::handleDebugValue`, there is no apparent reason to immediately prune
unused register operands as their defs are erased. Consequently, this renders
`MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval` moot; gaining a
substantial performance improvement.
The only necessary changes involve making relevant passes consider invalid
DBG_VALUE vregs uses as valid.
Reviewed By: MatzeB
Differential Revision: https://reviews.llvm.org/D112852
Add UNIQUED and DISTINCT properties in Metadata.def and use them to
implement restrictions on the `distinct` property of MDNodes:
* DIExpression can currently be parsed from IR or read from bitcode
as `distinct`, but this property is silently dropped when printing
to IR. This causes accepted IR to fail to round-trip. As DIExpression
appears inline at each use in the canonical form of IR, it cannot
actually be `distinct` anyway, as there is no syntax to describe it.
* Similarly, DIArgList is conceptually always uniqued. It is currently
restricted to only appearing in contexts where there is no syntax for
`distinct`, but for consistency it is treated equivalently to
DIExpression in this patch.
* DICompileUnit is already restricted to always being `distinct`, but
along with adding general support for the inverse restriction I went
ahead and described this in Metadata.def and updated the parser to be
general. Future nodes which have this restriction can share this
support.
The new UNIQUED property applies to DIExpression and DIArgList, and
forbids them to be `distinct`. It also implies they are canonically
printed inline at each use, rather than via MDNode ID.
The new DISTINCT property applies to DICompileUnit, and requires it to
be `distinct`.
A potential alternative change is to forbid the non-inline syntax for
DIExpression entirely, as is done with DIArgList implicitly by requiring
it appear in the context of a function. For example, we would forbid:
!named = !{!0}
!0 = !DIExpression()
Instead we would only accept the equivalent inlined version:
!named = !{!DIExpression()}
This essentially removes the ability to create a `distinct` DIExpression
by construction, as there is no syntax for `distinct` inline. If this
patch is accepted as-is, the result would be that the non-canonical
version is accepted, but the following would be an error and produce a diagnostic:
!named = !{!0}
; error: 'distinct' not allowed for !DIExpression()
!0 = distinct !DIExpression()
Also update some documentation to consistently use the inline syntax for
DIExpression, and to describe the restrictions on `distinct` for nodes
where applicable.
Reviewed By: StephenTozer, t-tye
Differential Revision: https://reviews.llvm.org/D104827
TargetPassConfig::addPass takes a "bool verifyAfter" argument which lets
you skip machine verification after a particular pass. Unfortunately
this is used in generic code in TargetPassConfig itself to skip
verification after a generic pass, only because some previous target-
specific pass damaged the MIR on that specific target. This is bad
because problems in one target cause lack of verification for all
targets.
This patch replaces that mechanism with a new MachineFunction property
called "FailsVerification" which can be set by (usually target-specific)
passes that are known to introduce problems. Later passes can reset it
again if they are known to clean up the previous problems.
Differential Revision: https://reviews.llvm.org/D111397
Print this basic block flag as inlineasm-br-indirect-target and parse
it. This allows you to write MIR test cases for INLINEASM_BR. The test
case I added is one that I wanted to precommit anyway for D110834.
Differential Revision: https://reviews.llvm.org/D111291
Based on the reasoning of D53903, register operands of DBG_VALUE are
invariably treated as RegState::Debug operands. This change enforces
this invariant as part of MachineInstr::addOperand so that all passes
emit this flag consistently.
RegState::Debug is inconsistently set on DBG_VALUE registers throughout
LLVM. This runs the risk of a filtering iterator like
MachineRegisterInfo::reg_nodbg_iterator to process these operands
erroneously when not parsed from MIR sources.
This issue was observed in the development of the llvm-mos fork which
adds a backend that relies on physical register operands much more than
existing targets. Physical RegUnit 0 has the same numeric encoding as
$noreg (indicating an undef for DBG_VALUE). Allowing debug operands into
the machine scheduler correlates $noreg with RegUnit 0 (i.e. a collision
of register numbers with different zero semantics). Eventually, this
causes an assert where DBG_VALUE instructions are prohibited from
participating in live register ranges.
Reviewed By: MatzeB, StephenTozer
Differential Revision: https://reviews.llvm.org/D110105
Currently the max alignment representable is 1GB, see D108661.
Setting the align of an object to 4GB is desirable in some cases to make sure the lower 32 bits are clear which can be used for some optimizations, e.g. https://crbug.com/1016945.
This uses an extra bit in instructions that carry an alignment. We can store 15 bits of "free" information, and with this change some instructions (e.g. AtomicCmpXchgInst) use 14 bits.
We can increase the max alignment representable above 4GB (up to 2^62) since we're only using 33 of the 64 values, but I've just limited it to 4GB for now.
The one place we have to update the bitcode format is for the alloca instruction. It stores its alignment into 5 bits of a 32 bit bitfield. I've added another field which is 8 bits and should be future proof for a while. For backward compatibility, we check if the old field has a value and use that, otherwise use the new field.
Updating clang's max allowed alignment will come in a future patch.
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D110451
