Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
Unsure why profile reader checks profile size to be less than 4 GB. This breaks builds using a very large profile.
The limit is not seen anywhere else, so I am not sure why is it there in the first place.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D140741
https://reviews.llvm.org/D135929 caused a failure in
binary-ids-padding.test in big endian configurations:
https://lab.llvm.org/buildbot/#/builders/231/builds/6709
binary-ids-padding.test writes the profile in little-endian format.
This patch changes the raw profile reader to use getDataEndianness()
instead of llvm::support::endian::system_endianness() to fix the issue.
This patch adds support for including binary ids in an indexed profile.
It adds a new field into the header that points to the offset of the
binary id section. The binary id section consists of a size of the
section, and a list of binary ids (if they are present) that consist
of two parts: length and data.
This patch guarantees that indexed profile is backwards compatible
after adding binary ids.
Differential Revision: https://reviews.llvm.org/D135929
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
This patch adds support for including binary ids in an indexed profile.
It adds a new field into the header that points to the offset of the
binary id section. The binary id section consists of a size of the
section, and a list of binary ids (if they are present) that consist
of two parts: length and data.
This patch guarantees that indexed profile is backwards compatible
after adding binary ids.
Differential Revision: https://reviews.llvm.org/D135929
This patch mechanically replaces None with std::nullopt where the
compiler would warn if None were deprecated. The intent is to reduce
the amount of manual work required in migrating from Optional to
std::optional.
This is part of an effort to migrate from llvm::Optional to
std::optional:
https://discourse.llvm.org/t/deprecating-llvm-optional-x-hasvalue-getvalue-getvalueor/63716
This was done as a test for D137302 and it makes sense to push these changes
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D137493
Previously, we only checked for duplicate zero entries when merging a
MemOPSize table (see D92074), but a user recently provided a reproducer
demonstrating that other entries can also be duplicated. As demonstrated
by the test in this patch, PGOMemOPSizeOpt can potentially generate
invalid IR for non-zero, non-consecutive duplicate entries. This seems
to be a rare case, since the duplicate entry is often below the
threshold, but possible. This patch extends the existing warning to
check for any duplicate values in the table, both in the optimization
and in llvm-profdata.
Differential Revision: https://reviews.llvm.org/D136211
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Then reverted again because it broke tests on MacOS, they should be
fixed now.
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
This reverts commit 04877284b4.
Looks like this is still breaking the test
Profile-x86_64 :: instrprof-darwin-dead-strip.c
(see comment on https://reviews.llvm.org/D135340).
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
This was reverted because it was breaking when targeting Darwin which
tried to export these symbols which are now hidden. It should be safe
to just stop attempting to export these symbols in the clang driver,
though Apple folks will need to change their TAPI allow list described
in the commit where these symbols were originally exported
f538018562
Bug: https://github.com/llvm/llvm-project/issues/58265
Differential Revision: https://reviews.llvm.org/D135340
Change the behavior of the `llvm-profdata show --debug-info=` command to dump a YAML file when using debug info correlation since it provides more information in a parseable format.
Reviewed By: yozhu, phosek
Differential Revision: https://reviews.llvm.org/D134770
This improves consistency with other places (e.g. llvm::compression::decompress,
llvm::object::Decompressor::decompress, llvm-objcopy).
Note: when zstd::uncompress was added, we noticed that the API `ZSTD_decompress`
is fine while the zlib API `uncompress` is a misnomer.
When we use selective instrumentation and instrument a file
that is not in the selected files list provided via -fprofile-list,
we generate an empty raw profile. This leads to empty_raw_profile
error when we try to read that profile. This patch fixes the issue by
generating a raw profile that contains only a profile header when
there are no counters and profile data.
A small reproducer for the above issue:
echo "src:other.cc" > code.list
clang++ -O2 -fprofile-instr-generate -fcoverage-mapping
-fprofile-list=code.list code.cc -o code
./code
llvm-profdata show default.profraw
Differential Revision: https://reviews.llvm.org/D132094
Current implementation promotes a non-cold function in the SampleFDO profile
into a hot function in the FDO profile. This is too aggressive. This patch
promotes a hot functions in the SampleFDO profile into a hot function, and a
warm function in SampleFDO into a warm function in FDO.
Differential Revision: https://reviews.llvm.org/D132601
Change loop induction variable type to match the type of "SIZE" where it's compared against, to prevent infinite loop caused by overflow wraparound if there are more than 2^32 samples
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D132493
This patch teaches llvm-profdata to output the sample profile in the
JSON format. The new option is intended to be used for research and
development purposes. For example, one can write a Python script to
take a JSON file and analyze how similar different inline instances of
a given function are to each other.
I've chosen JSON because Python can parse it reasonably fast, and it
just takes a couple of lines to read the whole data:
import json
with open ('profile.json') as f:
profile = json.load(f)
Differential Revision: https://reviews.llvm.org/D130944
If error occurs on constructing coverage info for one of the object files, it prints the name of the object file, so that users know which one is the cause of error.
Differential Revision: https://reviews.llvm.org/D130196
This patch reports number of counts being dropped when a hash-mismatch
happens. This information will be helpful to the users -- if the dropped
counts are large, the user should redo the instrumentation build and
recollect the profile.
Differential Revision: https://reviews.llvm.org/D129001
Don't cross reference CSFDO profile and non-CSFDO profile when
checking the function hash. Only return hash_mismatch when
CS bits match, and return unknown_function otherwise.
Differential Revision: https://reviews.llvm.org/D129000
It's more natural to use uint8_t * (std::byte needs C++17 and llvm has
too much uint8_t *) and most callers use uint8_t * instead of char *.
The functions are recently moved into `llvm::compression::zlib::`, so
downstream projects need to make adaption anyway.
(Reapply after revert in e9ce1a5880 due to
Fuchsia test failures. Removed changes in lib/ExecutionEngine/ other
than error categories, to be checked in more detail and reapplied
separately.)
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
Bulk remove many of the more trivial uses of ManagedStatic in the llvm
directory, either by defining a new getter function or, in many cases,
moving the static variable directly into the only function that uses it.
Differential Revision: https://reviews.llvm.org/D129120
* Refactor compression namespaces across the project, making way for a possible
introduction of alternatives to zlib compression.
Changes are as follows:
* Relocate the `llvm::zlib` namespace to `llvm::compression::zlib`.
Reviewed By: MaskRay, leonardchan, phosek
Differential Revision: https://reviews.llvm.org/D128953
