clang (like gcc) has the -mtune= command line option. This option
adds the "tune-cpu" attribute to a function. The intended functionality
is that the scheduling model of that cpu is used. E.g. -mtune=pwr9 -march=pwr8
generates only instructions supported on pwr8 but uses the scheduling model
of pwr9 for it.
This PR adds the infrastructure to support this in LLVM.
clang support was added in https://reviews.llvm.org/D130526.
Reviewed By: amyk, qiucf
Differential Revision: https://reviews.llvm.org/D138317
Need to include the cost of the initial insertelement to the cost of the
broadcasts. Also, need to adjust the cost of the gather/buildvector if
the element is inserted into poison/undef vector.
Differential Revision: https://reviews.llvm.org/D140498
Dynamic tls access model will be lowered to MI which clobbers CTR in
the loop in ISEL(ADDItlsgdLADDR) and post-isel CTR loop pass will revert
the loop to a normal compare + branch form.
So no need to add this clobber check in hardware loop insertion pass now.
Reviewed By: nemanjai
Differential revision: https://reviews.llvm.org/D140367
Use deduction guides instead of helper functions.
The only non-automatic changes have been:
1. ArrayRef(some_uint8_pointer, 0) needs to be changed into ArrayRef(some_uint8_pointer, (size_t)0) to avoid an ambiguous call with ArrayRef((uint8_t*), (uint8_t*))
2. CVSymbol sym(makeArrayRef(symStorage)); needed to be rewritten as CVSymbol sym{ArrayRef(symStorage)}; otherwise the compiler is confused and thinks we have a (bad) function prototype. There was a few similar situation across the codebase.
3. ADL doesn't seem to work the same for deduction-guides and functions, so at some point the llvm namespace must be explicitly stated.
4. The "reference mode" of makeArrayRef(ArrayRef<T> &) that acts as no-op is not supported (a constructor cannot achieve that).
Per reviewers' comment, some useless makeArrayRef have been removed in the process.
This is a follow-up to https://reviews.llvm.org/D140896 that introduced
the deduction guides.
Differential Revision: https://reviews.llvm.org/D140955
This patch also includes:
1: CRRegBank support
2: Some workarounds in PPC table gen for anyext/setcc patterns
selection.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D140878
Previous to this patch we only materialized 0.0 and all other floating point
values would be loaded from the TOC. This patch adds materialization for the
floating point values that can be represented as integers in [-16.0, 15.0].
For example we will now materialize 3.0 and -5.0 but not 4.7.
Reviewed By: nemanjai, lei, #powerpc
Differential Revision: https://reviews.llvm.org/D138844
Follow up to the series:
1. https://reviews.llvm.org/D140161
2. https://reviews.llvm.org/D140349
3. https://reviews.llvm.org/D140331
4. https://reviews.llvm.org/D140323
Completes the work from the previous two for remaining targets.
This creates the following named passes that can be run via
`llc -{start|stop}-{before|after}`:
- arc-isel
- arm-isel
- avr-isel
- bpf-isel
- csky-isel
- hexagon-isel
- lanai-isel
- loongarch-isel
- m68k-isel
- msp430-isel
- mips-isel
- nvptx-isel
- ppc-codegen
- riscv-isel
- sparc-isel
- systemz-isel
- ve-isel
- wasm-isel
- xcore-isel
A nice way to write tests for SelectionDAGISel might be to use a RUN:
line like:
llc -mtriple=<triple> -start-before=<arch>-isel -stop-after=finalize-isel -o -
Fixes: https://github.com/llvm/llvm-project/issues/59538
Reviewed By: asb, zixuan-wu
Differential Revision: https://reviews.llvm.org/D140364
This fixes what I consider to be an API flaw I've tripped over
multiple times. The point this is constructed isn't well defined, so
depending on where this is first called, you can conclude different
information based on the MachineFunction. For example, the AMDGPU
implementation inspected the MachineFrameInfo on construction for the
stack objects and if the frame has calls. This kind of worked in
SelectionDAG which visited all allocas up front, but broke in
GlobalISel which hasn't visited any of the IR when arguments are
lowered.
I've run into similar problems before with the MIR parser and trying
to make use of other MachineFunction fields, so I think it's best to
just categorically disallow dependency on the MachineFunction state in
the constructor and to always construct this at the same time as the
MachineFunction itself.
A missing feature I still could use is a way to access an custom
analysis pass on the IR here.
Generate brh, brw and brd instructions for byte-swap operations
on P10 and generating a single instruction for a 32-bit swap followed
by a 16-bit right shift.
Reviewed By: stefanp
Differential Revision: https://reviews.llvm.org/D140414
This is a fairly large changeset, but it can be broken into a few
pieces:
- `llvm/Support/*TargetParser*` are all moved from the LLVM Support
component into a new LLVM Component called "TargetParser". This
potentially enables using tablegen to maintain this information, as
is shown in https://reviews.llvm.org/D137517. This cannot currently
be done, as llvm-tblgen relies on LLVM's Support component.
- This also moves two files from Support which use and depend on
information in the TargetParser:
- `llvm/Support/Host.{h,cpp}` which contains functions for inspecting
the current Host machine for info about it, primarily to support
getting the host triple, but also for `-mcpu=native` support in e.g.
Clang. This is fairly tightly intertwined with the information in
`X86TargetParser.h`, so keeping them in the same component makes
sense.
- `llvm/ADT/Triple.h` and `llvm/Support/Triple.cpp`, which contains
the target triple parser and representation. This is very intertwined
with the Arm target parser, because the arm architecture version
appears in canonical triples on arm platforms.
- I moved the relevant unittests to their own directory.
And so, we end up with a single component that has all the information
about the following, which to me seems like a unified component:
- Triples that LLVM Knows about
- Architecture names and CPUs that LLVM knows about
- CPU detection logic for LLVM
Given this, I have also moved `RISCVISAInfo.h` into this component, as
it seems to me to be part of that same set of functionality.
If you get link errors in your components after this patch, you likely
need to add TargetParser into LLVM_LINK_COMPONENTS in CMake.
Differential Revision: https://reviews.llvm.org/D137838
Address the inconsistency between FLT_ROUNDS_ and SET_ROUNDING SDAG
node. Rename FLT_ROUNDS_ to GET_ROUNDING and add llvm.get.rounding
intrinsic to replace flt.rounds.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D139507
With D134950, targets get notified when a virtual register is created and/or
cloned. Targets can do the needful with the delegate callback. AMDGPU propagates
the virtual register flags maintained in the target file itself. They are useful
to identify a certain type of machine operands while inserting spill stores and
reloads. Since RegAllocFast spills the physical register itself, there is no way
its virtual register can be mapped back to retrieve the flags. It can be solved
by passing the virtual register as an additional argument. This argument has no
use when the spill interfaces are called during the greedy allocator or even the
PrologEpilogInserter and can pass a null register in such cases.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D138656
The combiner for BUILD_VECTOR that merges consecutive
loads into a wide load had two issues:
- It didn't check that the input loads all have the
same input chain
- It didn't update nodes that are chained to the original
loads to be chained to the new load
This caused issues with bootstrap when
3c4d2a0396 was committed.
This patch fixes the issue so it can unblock this commit.
Differential revision: https://reviews.llvm.org/D140046
Previously we had a shared ID in SelectionDAGISel. AMDGPU has an
initializePass function for its subclass of SelectionDAGISel. No
other target does.
This causes all target specific SelectionDAGISel passes to be known
as "amdgpu-isel".
I'm not sure what would happen if another target tried to implement
an initializePass function too since the ID is already claimed.
This patch gives all targets their own ID and passes it down to
SelectionDAGISel constructor to MachineFunctionPass's constructor.
Unfortunately, I think this causes most targets to lose
print-before/after-all support for their SelectionDAGISel pass.
And they probably no longer support start/stop-before/after. We
can add initializePass functions to fix this as a follow up. NOTE:
This was probably also broken if the AMDGPU target isn't compiled in.
Step 1 to fixing PR59538.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D140161
Adds support for i64 constant. It uses the same pattern-based
approach as in SDAG (see PPCISelDAGToDAG::selectI64ImmDirect(),
PPCISelDAGToDAG::selectI64Imm()). It does not support the
prefixed instructions.
Reviewed By: arsenm, tschuett
Differential Revision: https://reviews.llvm.org/D140119
The flags, initialization of the flags, and the getter methods for
features defined in PPC.td can be generated by TableGen.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D140028
The most common case for string attributes parses them as integers. We
don't have a convenient way to do this, and as a result we have
inconsistent missing attribute and invalid attribute handling
scattered around. We also have inconsistent radix usage to
getAsInteger; some places use the default 0 and others use base 10.
Update a few of the uses, but there are quite a lot of these.
These targets use `MCInst`, but don't explicitly link
to the library providing it (MC), and just rely on it
being pulled transitively through e.g. MCDisassembler,
but that only pulls includes, and does not link to it.
Case in point, when i add explicit destructor to `MCInst`,
defined in `.cpp`, these targets were failing to link.
Next patch after D139548 and D139439. Same expectations, the change seems safe with as far as llvm goes, we cannot check downstream implementations.
Differential Revision: https://reviews.llvm.org/D139614
Machine combiner supports generic reassociation only of associative and
commutative instructions, for example (A + X) + Y => (X + Y) + A. However, we
can extend this generic support to handle patterns like
(X + A) - Y => (X - Y) + A), where `-` is the inverse of `+`.
This patch adds interface functions to process reassociation patterns of
associative/commutative instructions and their inverse variants with minimal
changes in backends.
Differential Revision: https://reviews.llvm.org/D136754
We've exploited test data class instructions introduced in ISA 3.0.
This change unifies the scalar intrinsics into ppc_test_data_class
and add support for 128-bit precision float values using xststdcqp.
Vector versions of the intrinsic can't be unified because they return
vector int instead of int.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D138105
This patch adds the following NFC fixes to PPCInstrInfo.cpp when getting the DefMI:
- Fix documentation error to state that we want to flag a use of register
between the def and the MI (in post-RA)
- Setting the DefMI to null if the DefMI is neither an LI or and ADDI
(while still being in SSA form).
In terms of setting the DefMI to null, this change aims to account for the
scenario of when we end up going through all operands on the machine instruction
MI and updating OpNoForForwarding accordingly once an ADDI is found as the DefMI.
It is possible that once an ADDI is found, we will continue to go through all
operands in attempts to find an LI, but end up looking at every operand until
we reach the end if we have not yet found an LI. In the case where the end is
reached and we never end up finding an LI/ADDI, DefMI would be pointing to the
last operand of MI while OpNoForForwarding would still be pointing at the
previous ADDI operand found. We reset DefMI to avoid having DefMI point to an
instruction that differs from the one represented by OpNoForForwarding.
Differential Revision: https://reviews.llvm.org/D137483
Add support for fptosi,fptoui,sitofp,uitofp
For now only handle 64 bit integer to make it does not depend on
any other patches. 32 bit integer needs handling for G_SEXT/G_ZEXT.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D139174
We added a new post-isel CTRLoop pass in D122125. That pass will expand
the hardware loop related intrinsic to CTR loop or normal loop based
on the loop context. So we don't need to conservatively check the CTR
clobber now on the IR level.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D135847
