Summary:
Block splitting is done with either identical edges being merged, or not.
Only critical edges can be split without merging identical edges based on an option.
Teach the memoryssa updater to take this into account: for the same edge between two blocks only move one entry from the Phi in Old to the new Phi in New.
Reviewers: george.burgess.iv
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51563
llvm-svn: 341709
shuf (sel (shuf NarrowCond, undef, WideMask), X, Y), undef, NarrowMask) -->
sel NarrowCond, (shuf X, undef, NarrowMask), (shuf Y, undef, NarrowMask)
The motivating case from:
https://bugs.llvm.org/show_bug.cgi?id=38691
...is the last regression test. In that case, we're just left with the narrow select.
Note that if we do create new shuffles, they use the existing extraction identity mask,
so there's no danger that this transform creates arbitrary shuffles.
Differential Revision: https://reviews.llvm.org/D51496
llvm-svn: 341708
Summary:
Do away with demangling. It wasn't really necessary.
Declared some local functions to be static.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51740
llvm-svn: 341681
If the ~X wasn't able to simplify above the max/min, we might be able to simplify it by moving it below the max/min.
I had to modify the ~(min/max ~X, Y) transform to prevent getting stuck in a loop when we saw the new ~(max/min X, ~Y) before the ~Y had been folded away to remove the new not.
Differential Revision: https://reviews.llvm.org/D51398
llvm-svn: 341674
Fix a latent bug in loop vectorizer which generates incorrect code for
memory accesses that are executed conditionally. As pointed in review,
this bug definitely affects uniform loads and may affect conditional
stores that should have turned into scatters as well).
The code gen for conditionally executed uniform loads on architectures
that support masked gather instructions is broken.
Without this patch, we were unconditionally executing the *conditional*
load in the vectorized version.
This patch does the following:
1. Uniform conditional loads on architectures with gather support will
have correct code generated. In particular, the cost model
(setCostBasedWideningDecision) is fixed.
2. For the recipes which are handled after the widening decision is set,
we use the isScalarWithPredication(I, VF) form which is added in the
patch.
3. Fix the vectorization cost model for scalarization
(getMemInstScalarizationCost): implement and use isPredicatedInst to
identify *all* predicated instructions, not just scalar+predicated. So,
now the cost for scalarization will be increased for maskedloads/stores
and gather/scatter operations. In short, we should be choosing the
gather/scatter in place of scalarization on archs where it is
profitable.
4. We needed to weaken the assert in useEmulatedMaskMemRefHack.
Reviewers: Ayal, hsaito, mkuper
Differential Revision: https://reviews.llvm.org/D51313
llvm-svn: 341673
Find cold blocks based on profile information (or optionally with static analysis).
Forward propagate profile information to all cold-blocks.
Outline a cold region.
Set calling conv and prof hint for the callsite of the outlined function.
Worked in collaboration with: Sebastian Pop <s.pop@samsung.com>
Differential Revision: https://reviews.llvm.org/D50658
llvm-svn: 341669
If OtherOpT or OtherOpF have scalar types and the condition is a vector,
we would create an invalid select.
Reviewers: spatel, john.brawn, mssimpso, craig.topper
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D51781
llvm-svn: 341666
Currently eliminateInstructions only returns true if any instruction got
replaced. In the test case for this patch, we eliminate the trivially
dead calls, for which eliminateInstructions not do a replacement and the
function is not marked as changed, which is why the inliner crashes
while traversing the call graph.
Alternatively we could also change eliminateInstructions to return true
in case we mark instructions for deletion, but that's slightly more code
and doing it at the place where the replacement happens seems safer.
Fixes PR37517.
Reviewers: davide, mcrosier, efriedma, bjope
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D51169
llvm-svn: 341651
Introduce the -msan-kernel flag, which enables the kernel instrumentation.
The main differences between KMSAN and MSan instrumentations are:
- KMSAN implies msan-track-origins=2, msan-keep-going=true;
- there're no explicit accesses to shadow and origin memory.
Shadow and origin values for a particular X-byte memory location are
read and written via pointers returned by
__msan_metadata_ptr_for_load_X(u8 *addr) and
__msan_store_shadow_origin_X(u8 *addr, uptr shadow, uptr origin);
- TLS variables are stored in a single struct in per-task storage. A call
to a function returning that struct is inserted into every instrumented
function before the entry block;
- __msan_warning() takes a 32-bit origin parameter;
- local variables are poisoned with __msan_poison_alloca() upon function
entry and unpoisoned with __msan_unpoison_alloca() before leaving the
function;
- the pass doesn't declare any global variables or add global constructors
to the translation unit.
llvm-svn: 341637
IndVars does not set `Changed` flag when it eliminates dead instructions. As result,
it may make IR modifications and report that it has done nothing. It leads to inconsistent
preserved analyzes results.
Differential Revision: https://reviews.llvm.org/D51770
Reviewed By: skatkov
llvm-svn: 341633
The patch tries to make sample profile loader independent of profile format
change. It moves compact format related code into FunctionSamples and
SampleProfileReader classes, and sample profile loader only has to interact
with those two classes and will be unaware of profile format changes.
The cleanup also contain some fixes to further remove the difference between
compactbinary format and binary format. After the cleanup using different
formats originated from the same profile will generate the same binaries,
which we verified by compiling two large server benchmarks w/wo thinlto.
Differential Revision: https://reviews.llvm.org/D51643
llvm-svn: 341591
This fold is needed to avoid a regression when we try
to recommit rL300977.
We can't see the most basic win currently because
demanded bits changes the patterns:
https://rise4fun.com/Alive/plpp
llvm-svn: 341559
Add the __msan_va_arg_origin_tls TLS array to keep the origins for variadic function parameters.
Change the instrumentation pass to store parameter origins in this array.
This is a reland of r341528.
test/msan/vararg.cc doesn't work on Mips, PPC and AArch64 (because this
patch doesn't touch them), XFAIL these arches.
Also turned out Clang crashed on i80 vararg arguments because of
incorrect origin type returned by getOriginPtrForVAArgument() - fixed it
and added a test.
llvm-svn: 341554
I'm preparing to add the same functionality both here and to the DAG
version of this code in D51696 / D51433, so try to make those cases
as similar as possible to avoid bugs.
llvm-svn: 341545
There is no need to create preheaders in the analysis stage, we only
need them when adjusting the branches. Also, the only cases we need to
create our own preheaders is when they have more than 1 predecessors or
PHI nodes (even with only 1 predecessor, we could have an LCSSA phi
node). I have simplified the conditions and added some assertions to be
sure. Because we know the inner and outer loop need to be tightly
nested, it is sufficient to check if the inner loop preheader is the
outer loop header to check if we need to create a new preheader.
Reviewers: efriedma, mcrosier, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51703
llvm-svn: 341533
Add the __msan_va_arg_origin_tls TLS array to keep the origins for
variadic function parameters.
Change the instrumentation pass to store parameter origins in this array.
llvm-svn: 341528
Turns out that calling a variadic function with too many (e.g. >100 i64's)
arguments overflows __msan_va_arg_tls, which leads to smashing other TLS
data with function argument shadow values.
getShadow() already checks for kParamTLSSize and returns clean shadow if
the argument does not fit, so just skip storing argument shadow for such
arguments.
llvm-svn: 341525
Function rewriteLoopExitValues contains a check on isValidRewrite which
is needed to make sure that SCEV does not convert the pattern
`gep Base, (&p[n] - &p[0])` into `gep &p[n], Base - &p[0]`. This problem
has been fixed in SCEV long ago, so this check is just obsolete.
This patch converts it into an assertion to make sure that the SCEV will
not mess up this case in the future.
Differential Revision: https://reviews.llvm.org/D51582
Reviewed By: atrick
llvm-svn: 341516
The sum of the weights is caculated in an APInt, which has a width smaller than
64. In certain cases, the sum of the widths would overflow when calculations
are done inside an APInt, but would not if done with uint64_t. Since the
values will be passed as uint64_t in the function call anyways, do all the math
in 64 bits. Also added an assert in case the probabilities overflow 64 bits.
llvm-svn: 341444
I'm probably missing some way to use m_Deferred to remove the code
duplication, but that can be a follow-up.
The improvement in demand_shrink_nsw.ll is an example of missing
the fold because the pattern matching was deficient. I didn't try
to follow the bits in that test, but Alive says it's correct:
https://rise4fun.com/Alive/ugc
llvm-svn: 341426
Reland r341269. Use std::stable_sort when sorting constant condidates.
Reverting commit, r341365:
Revert r341269: [Constant Hoisting] Hoisting Constant GEP Expressions
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
Original commit, r341269:
[Constant Hoisting] Hoisting Constant GEP Expressions
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
https://reviews.llvm.org/D51396
Differential Revision: https://reviews.llvm.org/D51654
llvm-svn: 341417
This is fix for PR38786.
First order recurrence phis were incorrectly treated as uniform,
which caused them to be vectorized as uniform instructions.
Patch by Ayal Zaks and Orivej Desh!
Reviewed by: Anna
Differential Revision: https://reviews.llvm.org/D51639
llvm-svn: 341416
This is just a cleanup step. The TODO comments show
what is wrong with the 'and' version of the fold.
Fixing this should be part of recommitting:
rL300977
llvm-svn: 341405
Recent change to deleteDeadBlocksFromLoop was not enough to
fix all the problems related to dead blocks after nontrivial
unswitching of switches.
We need to delete all the dead blocks that were created during
unswitching, otherwise we will keep having problems with phi's
or dead blocks.
This change removes all the dead blocks that are reachable from the loop,
not trying to track whether these blocks are newly created by unswitching
or not. While not completely correct, we are unlikely to get loose but
reachable dead blocks that do not belong to our loop nest.
It does fix all the failures currently known, in particular PR38778.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D51519
llvm-svn: 341398
Summary:
Control height reduction merges conditional blocks of code and reduces the
number of conditional branches in the hot path based on profiles.
if (hot_cond1) { // Likely true.
do_stg_hot1();
}
if (hot_cond2) { // Likely true.
do_stg_hot2();
}
->
if (hot_cond1 && hot_cond2) { // Hot path.
do_stg_hot1();
do_stg_hot2();
} else { // Cold path.
if (hot_cond1) {
do_stg_hot1();
}
if (hot_cond2) {
do_stg_hot2();
}
}
This speeds up some internal benchmarks up to ~30%.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: xbolva00, dmgreen, mehdi_amini, llvm-commits, mgorny
Differential Revision: https://reviews.llvm.org/D50591
llvm-svn: 341386
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
llvm-svn: 341365
Load Hardening.
Wires up the existing pass to work with a proper IR attribute rather
than just a hidden/internal flag. The internal flag continues to work
for now, but I'll likely remove it soon.
Most of the churn here is adding the IR attribute. I talked about this
Kristof Beyls and he seemed at least initially OK with this direction.
The idea of using a full attribute here is that we *do* expect at least
some forms of this for other architectures. There isn't anything
*inherently* x86-specific about this technique, just that we only have
an implementation for x86 at the moment.
While we could potentially expose this as a Clang-level attribute as
well, that seems like a good question to defer for the moment as it
isn't 100% clear whether that or some other programmer interface (or
both?) would be best. We'll defer the programmer interface side of this
for now, but at least get to the point where the feature can be enabled
without relying on implementation details.
This also allows us to do something that was really hard before: we can
enable *just* the indirect call retpolines when using SLH. For x86, we
don't have any other way to mitigate indirect calls. Other architectures
may take a different approach of course, and none of this is surfaced to
user-level flags.
Differential Revision: https://reviews.llvm.org/D51157
llvm-svn: 341363
This patch removes the function `expandSCEVIfNeeded` which behaves not as
it was intended. This function tries to make a lookup for exact existing expansion
and only goes to normal expansion via `expandCodeFor` if this lookup hasn't found
anything. As a result of this, if some instruction above the loop has a `SCEVConstant`
SCEV, this logic will return this instruction when asked for this `SCEVConstant` rather
than return a constant value. This is both non-profitable and in some cases leads to
breach of LCSSA form (as in PR38674).
Whether or not it is possible to break LCSSA with this algorithm and with some
non-constant SCEVs is still in question, this is still being investigated. I wasn't
able to construct such a test so far, so maybe this situation is impossible. If it is,
it will go as a separate fix.
Rather than do it, it is always correct to just invoke `expandCodeFor` unconditionally:
it behaves smarter about insertion points, and as side effect of this it will choose a
constant value for SCEVConstants. For other SCEVs it may end up finding a better insertion
point. So it should not be worse in any case.
NOTE: So far the only known case for which this transform may break LCSSA is mapping
of SCEVConstant to an instruction. However there is a suspicion that the entire algorithm
can compromise LCSSA form for other cases as well (yet not proved).
Differential Revision: https://reviews.llvm.org/D51286
Reviewed By: etherzhhb
llvm-svn: 341345
Also adjust some of dsymutil's headers to put the header guards at the top,
otherwise the compiler will not recognize them as header guards.
llvm-svn: 341323
The fold was implemented for the general case but use-limitation,
but the later constant version which didn't check uses was only
matching splat constants.
llvm-svn: 341292
