This patch serializes the state of #pragma pack. It preserves the state of the
pragma from a PCH/from modules in a file that uses that PCH/those modules.
rdar://21359084
Differential Revision: https://reviews.llvm.org/D31241
llvm-svn: 299226
Sema holds the current FPOptions which is adjusted by 'pragma STDC
FP_CONTRACT'. This then gets propagated into expression nodes as they are
built.
This encapsulates FPOptions so that this propagation happens opaquely rather
than directly with the fp_contractable on/off bit. This allows controlled
transitioning of fp_contractable to a ternary value (off, on, fast). It will
also allow adding more fast-math flags later.
This is toward moving fp-contraction=fast from an LLVM TargetOption to a
FastMathFlag in order to fix PR25721.
Differential Revision: https://reviews.llvm.org/D31166
llvm-svn: 298877
This restores behavior pre-r230064 since after PCMCache work (r298278)
we don't reload PCMs from disk within the same compiler invocation.
Testcases from r230064 are still left around since they still guarantee
the correct behavior we're expecting.
rdar://problem/19889777
llvm-svn: 298464
This reverts commit r298185, effectively reapplying r298165, after fixing the
new unit tests (PR32338). The memory buffer generator doesn't null-terminate
the MemoryBuffer it creates; this version of the commit informs getMemBuffer
about that to avoid the assert.
Original commit message follows:
----
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298278
Clang's internal build system for implicit modules uses lock files to
ensure that after a process writes a PCM it will read the same one back
in (without contention from other -cc1 commands). Since PCMs are read
from disk repeatedly while invalidating, building, and importing, the
lock is not released quickly. Furthermore, the LockFileManager is not
robust in every environment. Other -cc1 commands can stall until
timeout (after about eight minutes).
This commit changes the lock file from being necessary for correctness
to a (possibly dubious) performance hack. The remaining benefit is to
reduce duplicate work in competing -cc1 commands which depend on the
same module. Follow-up commits will change the internal build system to
continue after a timeout, and reduce the timeout. Perhaps we should
reconsider blocking at all.
This also fixes a use-after-free, when one part of a compilation
validates a PCM and starts using it, and another tries to swap out the
PCM for something new.
The PCMCache is a new type called MemoryBufferCache, which saves memory
buffers based on their filename. Its ownership is shared by the
CompilerInstance and ModuleManager.
- The ModuleManager stores PCMs there that it loads from disk, never
touching the disk if the cache is hot.
- When modules fail to validate, they're removed from the cache.
- When a CompilerInstance is spawned to build a new module, each
already-loaded PCM is assumed to be valid, and is frozen to avoid
the use-after-free.
- Any newly-built module is written directly to the cache to avoid the
round-trip to the filesystem, making lock files unnecessary for
correctness.
Original patch by Manman Ren; most testcases by Adrian Prantl!
llvm-svn: 298165
Since bitcode uses VBR encoding, large numbers are more expensive than
small ones. Instead of emitting a UINT_MAX sentinel after each sequence
of state-change pairs, emit the size of the sequence as a prefix.
This should have no functionality change besides saving bits from the
encoding.
llvm-svn: 297770
Change ASTFileSignature from a random 32-bit number to the hash of the
PCM content.
- Move definition ASTFileSignature to Basic/Module.h so Module and
ASTSourceDescriptor can use it.
- Change the signature from uint64_t to std::array<uint32_t,5>.
- Stop using (saving/reading) the size and modification time of PCM
files when there is a valid SIGNATURE.
- Add UNHASHED_CONTROL_BLOCK, and use it to store the SIGNATURE record
and other records that shouldn't affect the hash. Because implicit
modules reuses the same file for multiple levels of -Werror, this
includes DIAGNOSTIC_OPTIONS and DIAG_PRAGMA_MAPPINGS.
This helps to solve a PCH + implicit Modules dependency issue: PCH files
are handled by the external build system, whereas implicit modules are
handled by internal compiler build system. This prevents invalidating a
PCH when the compiler overwrites a PCM file with the same content
(modulo the diagnostic differences).
Design and original patch by Manman Ren!
llvm-svn: 297655
Now print diagnostics for static, virtual, inline, volatile, and const
differences in methods. Also use DeclarationName instead of IdentifierInfo
for additional robustness in diagnostic printing.
llvm-svn: 296932
When we are deciding whether we are creating a PCH or a module, we would
check if the ModuleMgr had any elements to switch into PCH mode.
However, when creating a module, the size may be 1. This would result
in us going down the wrong path.
This was found by cross-compiling the swift standard library. Use the
PCH chain length instead to identify the PCH mode.
Unfortunately, I have not yet been able to create a simple test case for
this, but have verified that this fixes the swift standard library
construction.
Thanks to Adrian Prantl for help and discussions with this change!
llvm-svn: 296769
IdentifierInfo is hashed based on the stored string. FieldDecl versus other
Decl is now detected, as well as differently named fields.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295911
Add support for static_cast in classes. Add pointer-independent profiling for
Stmt's, sharing most of the logic with Stmt::Profile. This is the first of the
deep sub-Decl diffing for error messages.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295890
Add the basics for the ODRHash class, which will only process Decl's from
a whitelist, which currently only has AccessSpecDecl. Different access
specifiers in merged classes can now be detected.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295800
If we never need to map any ID within the module to its global ID, we don't
need the module offset map. If a compilation transitively depends on lots of
unused module files, this can result in a modest performance improvement.
llvm-svn: 295517
A slightly weaker form of ODR checking than previous attempts, but hopefully
won't break the modules build bot. Future work will be needed to catch all
cases.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295421
Removed ndrange_t as Clang builtin type and added
as a struct type in the OpenCL header.
Use type name to do the Sema checking in enqueue_kernel
and modify IR generation accordingly.
Review: D28058
Patch by Dmitry Borisenkov!
llvm-svn: 295311
Recommit r293585 that was reverted in r293611 with new fixes. The previous
issue was determined to be an overly aggressive AST visitor from forward
declared objects. The visitor will now only deeply visit certain Decl's and
only do a shallow information extraction from all other Decl's.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295284
We model deduction-guides as functions with a new kind of name that identifies
the template whose deduction they guide; the bulk of this patch is adding the
new name kind. This gives us a clean way to attach an extensible list of guides
to a class template in a way that doesn't require any special handling in AST
files etc (and we're going to need these functions we come to performing
deduction).
llvm-svn: 294266
We're seeing what we believe are false positives. (It's hard to tell with the
available diagnostics, and I'm not sure how to reduce them yet).
I'll send Richard reproduction details offline.
djasper/chandlerc suggested this should be a warning for now, to make rolling it
out feasible.
llvm-svn: 293611
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taked from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 293585
First pass at generating weak definitions of inline functions from module files
(& skipping (-O0) or emitting available_externally (optimizations)
definitions where those modules are used).
External functions defined in modules are emitted into the modular
object file as well (this may turn an existing ODR violation (if that
module were imported into multiple translations) into valid/linkable
code).
Internal symbols (static functions, for example) are not correctly
supported yet. The symbol will be produced, internal, in the modular
object - unreferenceable from the users.
Reviewers: rsmith
Differential Revision: https://reviews.llvm.org/D28845
llvm-svn: 293456
ModuleManager::removeModules always deletes a tail of the
ModuleManager::Chain. Change the API to enforce that so that we can
simplify the code inside.
There's no real functionality change, although there's a slight
performance hack to loop to the First deleted module instead of the
final module in the chain (skipping the about-to-be-deleted tail).
Also document something suspicious: we fail to clean deleted modules out
of ModuleFile::Imports.
llvm-svn: 293398
Hide the pointer indirection in ModuleManager::begin, ModuleManager::end,
ModuleManager::rbegin, and ModuleManager::rend. Besides tidying up the call
sites, this is preparation for making ownership of ModuleFile explicit.
llvm-svn: 293394
This change adds a new type node, DeducedTemplateSpecializationType, to
represent a type template name that has been used as a type. This is modeled
around AutoType, and shares a common base class for representing a deduced
placeholder type.
We allow deduced class template types in a few more places than the standard
does: in conditions and for-range-declarators, and in new-type-ids. This is
consistent with GCC and with discussion on the core reflector. This patch
does not yet support deduced class template types being named in typename
specifiers.
llvm-svn: 293207
Rather than storing a single flat list of SourceLocations where the diagnostic
state changes (in source order), we now store a separate list for each FileID
in which there is a diagnostic state transition. (State for other files is
built and cached lazily, on demand.) This has two consequences:
1) We can now sensibly support modules, and properly track the diagnostic state
for modular headers (this matters when, for instance, triggering instantiation
of a template defined within a module triggers diagnostics).
2) It's much faster than the old approach, since we can now just do a binary
search on the offsets within the FileID rather than needing to call
isBeforeInTranslationUnit to determine source order (which is surprisingly
slow). For some pathological (but real world) files, this reduces total
compilation time by more than 10%.
For now, the diagnostic state points for modules are loaded eagerly. It seems
feasible to defer this until diagnostic state information for one of the
module's files is needed, but that's not part of this patch.
llvm-svn: 293123
Summary:
Add a callback from ASTReader to DeserializationListener when the former
reads an IMPORTED_MODULES block. This supports Swift in using PCH for
bridging headers.
Reviewers: doug.gregor, manmanren, bruno
Reviewed By: manmanren
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28779
llvm-svn: 292436
D28684 changed llvm::zlib to return Error instead of Status.
It was accepted and committed in r292214, but then reverted in r292217
because I missed that clang code also needs to be updated.
Patch do that.
D28684 recommitted again as r292226
Differential revision: https://reviews.llvm.org/D28807
llvm-svn: 292227
Summary:
We do not currently track the source locations for exception specifications such
that their source range can be queried through the AST. This leads to trying to
write more complex code to determine the source range for uses like FixItHints
(see D18575 for an example). In addition to use within tools like clang-tidy, I
think this information may become more important to track as exception
specifications become more integrated into the type system.
Patch by Don Hinton.
Reviewers: rsmith
Subscribers: malcolm.parsons, sbarzowski, alexfh, hintonda, cfe-commits
Differential Revision: https://reviews.llvm.org/D20428
llvm-svn: 291771
Summary:
For ASTDeclReader and ASTStmtReader, every parameter "unsigned &Idx" ultimately
comes from a variable that is defined on the stack, next to the RecordData. This
change moves that index into the ASTRecordReader.
TypeLocReader cannot be transitioned, due to TableGen-generated code which calls
ASTReader::GetTypeSourceInfo.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27836
llvm-svn: 290217
