Summary:
The following changes addresses the following two issues.
1) The existing loop rotation pass contains both loop latch simplification and loop rotation. So one flag RotationOnly is added to be passed to the loop rotation pass.
2) The threshold value is initialized with MAX_UINT since the loop rotation utility should not have threshold limit.
Reviewers: dmgreen, efriedma
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D45582
llvm-svn: 330362
Summary:
This fixes the bug pointed out in review with non-trivial unswitching.
This also provides a basis that should make it pretty easy to finish
fleshing out a routine to scan an entire function body for irreducible
control flow, but this patch remains minimal for disabling loop
unswitch.
Reviewers: sanjoy, fedor.sergeev
Subscribers: mcrosier, hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D45754
llvm-svn: 330357
If those operands change, we might find a leader for ValueOp, which
could enable new phi-of-op creation.
This fixes a case where we missed creating a phi-of-ops node. With D43865
and this patch, bootstrapping clang/llvm works with -enable-newgvn, whereas
without it, the "value changed after iteration" assertion is triggered.
Reviewers: dberlin, davide
Reviewed By: dberlin
Differential Revision: https://reviews.llvm.org/D42180
llvm-svn: 330334
After investigation discussed in D45439, it would seem that the nsw
flag restriction is unnecessary in most cases. So the IsInductionVar
lambda has been removed, the functionality extracted, and now only
require nsw when using eq/ne predicates.
Differential Revision: https://reviews.llvm.org/D45617
llvm-svn: 330256
If a predicate does not become known after peeling, peeling is unlikely
to be beneficial.
Reviewers: mcrosier, efriedma, mkazantsev, junbuml
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D44983
llvm-svn: 330250
Summary:
When sinking an instruction in InstCombine we now also sink
the DbgInfoIntrinsics that are using the sunken value.
Example)
When sinking the load in this input
bb.X:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
br label %for.body
we now also move the dbg.value, like this
bb.X:
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br label %for.body
In the past we haven't moved the dbg.value so we got
bb.X:
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
br label %for.body
So in the past we got a debug-use before the def of %0.
And that dbg.value was also on the path jumping to %for.end, for
which %0 never was defined.
CodeGenPrepare normally comes to rescue later (when not moving
the dbg.value), since it moves dbg.value instrinsics quite
brutally, without really analysing if it is correct to move
the intrinsic (see PR31878).
So at the moment this patch isn't expected to have much impact,
besides that it is moving the dbg.value already in opt, making
the IR look more sane directly.
This can be seen as a preparation to (hopefully) make it possible
to turn off CodeGenPrepare::placeDbgValues later as a solution
to PR31878.
I also adjusted test/DebugInfo/X86/sdagsplit-1.ll to make the
IR in the test case up-to-date with this behavior in InstCombine.
Reviewers: rnk, vsk, aprantl
Reviewed By: vsk, aprantl
Subscribers: mattd, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45425
llvm-svn: 330243
The bitcast may be interfering with other combines or vectorization
as shown in PR16739:
https://bugs.llvm.org/show_bug.cgi?id=16739
Most pointer-related optimizations are probably able to look through
this bitcast, but removing the bitcast shrinks the IR, so it's at
least a size savings.
Differential Revision: https://reviews.llvm.org/D44833
llvm-svn: 330237
Track the debug locations of the incoming values to newly-created phis,
and apply merged debug locations to the phis.
A merged location will be on line 0, but will have the correct scope
set. This improves crash reporting when an inlined instruction with a
merged location triggers a machine exception. A debugger will be able to
narrow down the crash to the correct inlined scope, instead of simply
pointing to the outer scope of the caller.
Taken together with a change allows generating merged line-0 locations
for instructions which aren't calls, this results in a 0.5% increase in
the uncompressed size of the .debug_line section of a stage2+Release
build of clang (-O3 -g).
rdar://33858697
Differential Revision: https://reviews.llvm.org/D45397
llvm-svn: 330227
When we skip bitcasts while looking for GEP in LoadSoreVectorizer
we should also verify that the type is sized otherwise we assert
Differential Revision: https://reviews.llvm.org/D45709
llvm-svn: 330221
One more, hopefully the last, bug is fixed: when forming UsesToRewrite
we should ignore phi operands coming from edges that we want to delete.
This reverts r329910.
llvm-svn: 330175
We use getExtractWithExtendCost to calculate the cost of extractelement and
s|zext together when computing the extract cost after vectorization, but we
calculate the cost of extractelement and s|zext separately when computing the
scalar cost which is larger than it should be.
Differential Revision: https://reviews.llvm.org/D45469
llvm-svn: 330143
Two cleanups:
1. As noted in D45453, we had tests that don't need FMF that were misplaced in the 'fast-math.ll' test file.
2. This removes the final uses of dyn_castFNegVal, so that can be deleted. We use 'match' now.
llvm-svn: 330126
Summary:
In order to get the whole fold as specified in [[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]],
let's first handle the simple straight-forward things.
Let's start with the `and` -> `or` simplification.
The one obvious thing missing here: the constant mask is not handled.
I have an idea how to handle it, but it will require some thinking,
and is not strictly required here, so i've left that for later.
https://rise4fun.com/Alive/Pkmg
Reviewers: spatel, craig.topper, eli.friedman, jingyue
Reviewed By: spatel
Subscribers: llvm-commits
Was reviewed as part of https://reviews.llvm.org/D45631
llvm-svn: 330103
As suggested in https://reviews.llvm.org/D45631#1068338,
looking at haveNoCommonBitsSet() users, and *trying* to
show the change effect elsewhere.
llvm-svn: 330100
These simplifications were previously enabled only with isFast(), but that
is more restrictive than required. Since r317488, FMF has 'reassoc' to
control these cases at a finer level.
llvm-svn: 330089
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
The function getMinimumVF(ElemWidth) will return the minimum VF for
a vector with elements of size ElemWidth bits. This value will only
apply to targets for which TTI::shouldMaximizeVectorBandwidth returns
true. The value of 0 indicates that there is no minimum VF.
Differential Revision: https://reviews.llvm.org/D45271
llvm-svn: 330062
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kcc, pcc, danielcdh, jmolloy, sanjoy, dberlin, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D45142
llvm-svn: 330059
Summary:
The fold added in D45108 did not account for the fact that
the and instruction is commutative, and if the mask is a variable,
the mask variable and the fold variable may be swapped.
I have noticed this by accident when looking into [[ https://bugs.llvm.org/show_bug.cgi?id=6773 | PR6773 ]]
This extends/generalizes that fold, so it is handled too.
Reviewers: spatel, craig.topper
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45539
llvm-svn: 330001
This completes the work started in r329604 and r329605 when we changed clang to no longer use the intrinsics.
We lost some InstCombine SimplifyDemandedBit optimizations through this change as we aren't able to fold 'and', bitcast, shuffle very well.
llvm-svn: 329990
Created a helper function to query for non negative SCEVs. Uses the
SGE predicate to catch constants that could be interpreted as
negative.
Differential Revision: https://reviews.llvm.org/D45481
llvm-svn: 329907
We're already removing allocsize attributes from Functions that we
remove args from, since removing arguments from a function may make the
allocsize attribute incorrect. It appears we forgot to also remove them
from callsites.
Without this, I get verifier errors on `@Test2`.
It probably wouldn't be too hard to make DAE properly update allocsize
attributes instead of dropping them, but I can't think of a scenario
where that'd be useful in practice.
llvm-svn: 329868
The standard says that the order of evaluation of an expression
s[x] = foo()
is unspecified. In our case, we first create an empty entry in the map,
then call foo(), then store its return value to the created entry. The
problem is that foo uses the map as a cache, so if it finds that there
is an entry in the map, it stops computation. This change explicitly
sets the order, thus fixing this heisenbug.
llvm-svn: 329864
With -fno-plt, for example, calls to printf when getting converted to puts
still use the PLT. This patch checks for the metadata "RtLibUseGOT" and
annotates the declaration with the right attributes.
Differential Revision: https://reviews.llvm.org/D45180
llvm-svn: 329768
This is based on an example that was recently posted on llvm-dev:
void *propagate_null(void* b, int* g) {
if (!b) {
return 0;
}
(*g)++;
return b;
}
https://godbolt.org/g/xYk3qG
The original code or constant propagation in other passes has obscured the fact
that the phi can be removed completely.
Differential Revision: https://reviews.llvm.org/D45448
llvm-svn: 329755
