Summary:
As discussed on the mailing list it is legal to propagate TBAA to loads/stores
from/to smaller regions of a larger load tagged with TBAA. Do so for
(load->extractvalue)=>(gep->load) and similar foldings.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D31954
llvm-svn: 306615
r306381 caused PR33613, by reversing the order in which insertelements were
generated per unroll part. This patch fixes PR33613 by retraining this order,
placing each set of insertelements per part immediately after the last scalar
being packed for this part. Includes a test case derived from PR33613.
Reference: https://bugs.llvm.org/show_bug.cgi?id=33613
Differential Revision: https://reviews.llvm.org/D34760
llvm-svn: 306575
Summary:
I was testing using this expansion logic in other cases besides
NVPTX, and found some runtime failures due to the lack of a check
for a zero length memcpy/memset before the loop. There is already
such a check in the memmove expansion code though.
Reviewers: hfinkel
Subscribers: jholewinski, wdng, llvm-commits
Differential Revision: https://reviews.llvm.org/D34707
llvm-svn: 306541
Summary:
This commit allows matchSelectPattern to recognize clamp of float
arguments in the presence of FMF the same way as already done for
integers.
This case is a little different though. With integers, given the
min/max pattern is recognized, DAGBuilder starts selecting MIN/MAX
"automatically". That is not the case for float, because for them only
full FMINNAN/FMINNUM/FMAXNAN/FMAXNUM ISD nodes exist and they do care
about NaNs. On the other hand, some backends (e.g. X86) have only
FMIN/FMAX nodes that do not care about NaNS and the former NAN/NUM
nodes are illegal thus selection is not happening. So I decided to do
such kind of transformation in IR (InstCombiner) instead of
complicating the logic in the backend.
Reviewers: spatel, jmolloy, majnemer, efriedma, craig.topper
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, n.bozhenov, llvm-commits
Patch by Andrei Elovikov <andrei.elovikov@intel.com>
Differential Revision: https://reviews.llvm.org/D33186
llvm-svn: 306525
A slightly more efficient way to get constant, we avoid resolving in getSCEV and excessive
invocations, and we don't create a ConstantInt if 'true' branch is taken.
Differential Revision: https://reviews.llvm.org/D34672
llvm-svn: 306503
When simplifying an instruction that has been re-mapped, it should never
simplify to an instruction in the original function. In the edge case
where we are inlining a function into itself, the existing code led to
incorrect behavior. Replace the incorrect code with an assert verifying
that we never expect simplification to produce an instruction in the old
function, unless the functions are the same.
Differential Revision: https://reviews.llvm.org/D33850
llvm-svn: 306495
The check to see if we can propagate the nsw flag used m_ConstantInt(uint64_t*&) which doesn't work with splat vectors and has a restriction that the bitwidth of the ConstantInt must be 64-bits are less.
This patch changes it to use m_APInt to remove both these issues
Differential Revision: https://reviews.llvm.org/D34699
llvm-svn: 306457
BlockAddress are only valid within their function context, which does not
interact well with CodeExtractor. Detect this case and prevent it.
Differential Revision: https://reviews.llvm.org/D33839
llvm-svn: 306448
SROA assumes alloca address space is 0, which causes assertion. This patch fixes that.
Differential Revision: https://reviews.llvm.org/D34104
llvm-svn: 306440
This canonicalization was suggested in D33172 as a way to make InstCombine behavior more uniform.
We have this transform for icmp+br, so unless there's some reason that icmp+select should be
treated differently, we should do the same thing here.
The benefit comes from increasing the chances of creating identical instructions. This is shown in
the tests in logical-select.ll (PR32791). InstCombine doesn't fold those directly, but EarlyCSE
can simplify the identical cmps, and then InstCombine can fold the selects together.
The possible regression for the tests in select.ll raises questions about poison/undef:
http://lists.llvm.org/pipermail/llvm-dev/2017-May/113261.html
...but that transform is just as likely to be triggered by this canonicalization as it is to be
missed, so we're just pointing out a commutation deficiency in the pattern matching:
https://reviews.llvm.org/rL228409
Differential Revision: https://reviews.llvm.org/D34242
llvm-svn: 306435
Instead of getBackEdgeTakenCount, use getExitCount on the latch exiting block
(which is proven to be the only exiting block in the loop to be unrolled).
llvm-svn: 306410
Undoing revert 306338 after fixed bug: add metadata to the load instead of the
reverse shuffle added to it, retaining the original ValueMap implementation.
llvm-svn: 306381
This is based heavily on the work done ni D34285. I mostly wanted to do
test cleanup for the author to save them some time, but I had a really
hard time understanding why it was so hard to write better test cases
for these issues.
The problem is that because SROA does a second rewrite of the loads and
because we *don't* propagate !nonnull for non-pointer loads, we first
introduced invalid !nonnull metadata and then stripped it back off just
in time to avoid most ways of this PR manifesting. Moving to the more
careful utility only fixes this by changing the predicate to look at the
new load's type rather than the target type. However, that *does* fix
the bug, and the utility is much nicer including adding range metadata
to model the nonnull property after a conversion to an integer.
However, we have bigger problems because we don't actually propagate
*range* metadata, and the utility to do this extracted from instcombine
isn't really in good shape to do this currently. It *only* handles the
case of copying range metadata from an integer load to a pointer load.
It doesn't even handle the trivial cases of propagating from one integer
load to another when they are the same width! This utility will need to
be beefed up prior to using in this location to get the metadata to
fully survive.
And even then, we need to go and teach things to turn the range metadata
into an assume the way we do with nonnull so that when we *promote* an
integer we don't lose the information.
All of this will require a new test case that looks kind-of like
`preserve-nonnull.ll` does here but focuses on range metadata. It will
also likely require more testing because it needs to correctly handle
changes to the integer width, especially as SROA actively tries to
change the integer width!
Last but not least, I'm a little worried about hooking the range
metadata up here because the instcombine logic for converting from
a range metadata *to* a nonnull metadata node seems broken in the face
of non-zero address spaces where null is not mapped to the integer `0`.
So that probably needs to get fixed with test cases both in SROA and in
instcombine to cover it.
But this *does* extract the core PR fix from D34285 of preventing the
!nonnull metadata from being propagated in a broken state just long
enough to feed into promotion and crash value tracking.
On D34285 there is some discussion of zero-extend handling because it
isn't necessary. First, the new load size covers all of the non-undef
(ie, possibly initialized) bits. This may even extend past the original
alloca if loading those bits could produce valid data. The only way its
valid for us to zero-extend an integer load in SROA is if the original
code had a zero extend or those bits were undef. And we get to assume
things like undef *never* satifies nonnull, so non undef bits can
participate here. No need to special case the zero-extend handling, it
just falls out correctly.
The original credit goes to Ariel Ben-Yehuda! I'm mostly landing this to
save a few rounds of trivial edits fixing style issues and test case
formulation.
Differental Revision: D34285
llvm-svn: 306379
Summary:
EraseInst didn't report that it made IR changes through MadeChange.
It is essential that changes to the IR are reported correctly,
since for example ReassociatePass::run() will indicate that all
analyses are preserved otherwise.
And the CGPassManager determines if the CallGraph is up-to-date
based on status from InstructionCombiningPass::runOnFunction().
Reviewers: craig.topper, rnk, davide
Reviewed By: rnk, davide
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34616
llvm-svn: 306368
Summary:
vectorizer-maximize-bandwidth is generally useful in terms of performance. I've tested the impact of changing this to default on speccpu benchmarks on sandybridge machines. The result shows non-negative impact:
spec/2006/fp/C++/444.namd 26.84 -0.31%
spec/2006/fp/C++/447.dealII 46.19 +0.89%
spec/2006/fp/C++/450.soplex 42.92 -0.44%
spec/2006/fp/C++/453.povray 38.57 -2.25%
spec/2006/fp/C/433.milc 24.54 -0.76%
spec/2006/fp/C/470.lbm 41.08 +0.26%
spec/2006/fp/C/482.sphinx3 47.58 -0.99%
spec/2006/int/C++/471.omnetpp 22.06 +1.87%
spec/2006/int/C++/473.astar 22.65 -0.12%
spec/2006/int/C++/483.xalancbmk 33.69 +4.97%
spec/2006/int/C/400.perlbench 33.43 +1.70%
spec/2006/int/C/401.bzip2 23.02 -0.19%
spec/2006/int/C/403.gcc 32.57 -0.43%
spec/2006/int/C/429.mcf 40.35 +0.27%
spec/2006/int/C/445.gobmk 26.96 +0.06%
spec/2006/int/C/456.hmmer 24.4 +0.19%
spec/2006/int/C/458.sjeng 27.91 -0.08%
spec/2006/int/C/462.libquantum 57.47 -0.20%
spec/2006/int/C/464.h264ref 46.52 +1.35%
geometric mean +0.29%
The regression on 453.povray seems real, but is due to secondary effects as all hot functions are bit-identical with and without the flag.
I started this patch to consult upstream opinions on this. It will be greatly appreciated if the community can help test the performance impact of this change on other architectures so that we can decided if this should be target-dependent.
Reviewers: hfinkel, mkuper, davidxl, chandlerc
Reviewed By: chandlerc
Subscribers: rengolin, sanjoy, javed.absar, bjope, dorit, magabari, RKSimon, llvm-commits, mzolotukhin
Differential Revision: https://reviews.llvm.org/D33341
llvm-svn: 306336
Instead of providing access to the internal MapStorage holding all Values
associated with a given Key, used for setting or resetting them all together,
ValueMap keeps its MapStorage internal; its new interface allows getting,
setting or resetting a single Value, per part or per part-and-lane.
Follows the discussion in https://reviews.llvm.org/D32871.
Differential Revision: https://reviews.llvm.org/D34473
llvm-svn: 306331
The recommit fixes three bugs: The first one is to use CurrentBlock instead of
PREInstr's Parent as param of performScalarPREInsertion because the Parent
of a clone instruction may be uninitialized. The second one is stop PRE when
CurrentBlock to its predecessor is a backedge and an operand of CurInst is
defined inside of CurrentBlock. The same value defined inside of loop in last
iteration can not be regarded as available. The third one is an out-of-bound
array access in a flipped if guard.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
llvm-svn: 306313
metadata out of InstCombine and into helpers.
NFC, this just exposes the logic used by InstCombine when propagating
metadata from one load instruction to another. The plan is to use this
in SROA to address PR32902.
If anyone has better ideas about how to factor this or name variables,
I'm all ears, but this seemed like a pretty good start and lets us make
progress on the PR.
This is based on a patch by Ariel Ben-Yehuda (D34285).
llvm-svn: 306267
This was reverted in r306252, but I already had the bug fixed and was
just trying to form a test case.
The original commit factored the logic for forming dedicated exits
inside of LoopSimplify into a helper that could be used elsewhere and
with an approach that required fewer intermediate data structures. See
that commit for full details including the change to the statistic, etc.
The code looked fine to me and my reviewers, but in fact didn't handle
indirectbr correctly -- it left the 'InLoopPredecessors' vector dirty.
If you have code that looks *just* right, you can end up leaking these
predecessors into a subsequent rewrite, and crash deep down when trying
to update PHI nodes for predecessors that don't exist.
I've added an assert that makes the bug much more obvious, and then
changed the code to reliably clear the vector so we don't get this bug
again in some other form as the code changes.
I've also added a test case that *does* manage to catch this while also
giving some nice positive coverage in the face of indirectbr.
The real code that found this came out of what I think is CPython's
interpreter loop, but any code with really "creative" interpreter loops
mixing indirectbr and other exit paths could manage to tickle the bug.
I was hard to reduce the original test case because in addition to
having a particular pattern of IR, the whole thing depends on the order
of the predecessors which is in turn depends on use list order. The test
case added here was designed so that in multiple different predecessor
orderings it should always end up going down the same path and tripping
the same bug. I hope. At least, it tripped it for me without
manipulating the use list order which is better than anything bugpoint
could do...
llvm-svn: 306257
Recommit NFC patch (rL306157) where I missed incrementing the basic block iterator,
which caused loop deletion tests to hang due to infinite loop.
Had reverted it in rL306162.
rL306157 commit message:
Currently, the implementation of delete dead loops has a special case
when the loop being deleted is never executed. This special case
(updating of exit block's incoming values for phis) can be
run as a prepass for non-executable loops before performing
the actual deletion.
llvm-svn: 306254
http://rise4fun.com/Alive/i8Q
A narrow bitwise logic op is obviously better than math for value tracking,
and zext is better than sext. Typically, the 'not' will be folded into an
icmp predicate.
The IR difference would even survive through codegen for x86, so we would see
worse code:
https://godbolt.org/g/C14HMF
one_or_zero(int, int): # @one_or_zero(int, int)
xorl %eax, %eax
cmpl %esi, %edi
setle %al
retq
one_or_zero_alt(int, int): # @one_or_zero_alt(int, int)
xorl %ecx, %ecx
cmpl %esi, %edi
setg %cl
movl $1, %eax
subl %ecx, %eax
retq
llvm-svn: 306243
Summary:
InstCombine replaces large allocas with small globals consts causing buffer overflows
on valid code, see PR33372.
This fix permits this optimization only if the global is dereference for alloca size.
Fixes PR33372
Reviewers: eugenis, majnemer, chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34311
llvm-svn: 306194
This reverts commit r306157.
It caused some timeouts in clang tests. Perhaps unreachable loops have
far too many phi nodes.
Reverting and investigating.
llvm-svn: 306162
Currently, the implementation of delete dead loops has a special case
when the loop being deleted is never executed. This special case
(updating of exit block's incoming values for phis) can be
run as a prepass for non-executable loops before performing
the actual deletion.
llvm-svn: 306157
Summary:
Many languages have a three way comparison idiom where comparing two values
produces not a boolean, but a tri-state value. Typical values (e.g. as used in
the lcmp/fcmp bytecodes from Java) are -1 for less than, 0 for equality, and +1
for greater than.
We actually do a great job already of converting three way comparisons into
binary comparisons when the result produced has one a single use. Unfortunately,
such values can have more than one use, and in that case, our existing
optimizations break down.
The patch adds a peephole which converts a three-way compare + test idiom into a
binary comparison on the original inputs. It focused on replacing the test on
the result of the three way compare and does nothing about removing the three
way compare itself. That's left to other optimizations (which do actually kick
in commonly.)
We currently recognize one idiom on signed integer compare. In the future, we
plan to recognize and simplify other comparison idioms on
other signed/unsigned datatypes such as floats, vectors etc.
This is a resurrection of Philip Reames' original patch:
https://reviews.llvm.org/D19452
Reviewers: majnemer, apilipenko, reames, sanjoy, mkazantsev
Reviewed by: mkazantsev
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34278
llvm-svn: 306100
Currently JumpThreading can use LazyValueInfo to analyze an 'and' or 'or' of compare if the compare is fed by a livein of a basic block. This can be used to to prove the condition can't be met for some predecessor and the jump from that predecessor can be moved to the false path of the condition.
But if the compare is something that InstCombine turns into an add and a single compare, it can't be analyzed because the livein is now an input to the add and not the compare.
This patch adds a new method to LVI to get a ConstantRange on an edge. Then we teach jump threading to detect the add livein feeding a compare and to get the ConstantRange and propagate it.
Differential Revision: https://reviews.llvm.org/D33262
llvm-svn: 306085
I want to use the same logic as LoopSimplify to form dedicated exits in
another pass (SimpleLoopUnswitch) so I wanted to factor it out here.
I also noticed that there is a pretty significantly more efficient way
to implement this than the way the code in LoopSimplify worked. We don't
need to actually retain the set of unique exit blocks, we can just
rewrite them as we find them and use only a set to deduplicate.
This did require changing one part of LoopSimplify to not re-use the
unique set of exits, but it only used it to check that there was
a single unique exit. That part of the code is about to walk the exiting
blocks anyways, so it seemed better to rewrite it to use those exiting
blocks to compute this property on-demand.
I also had to ditch a statistic, but it doesn't seem terribly valuable.
Differential Revision: https://reviews.llvm.org/D34049
llvm-svn: 306081
Summary:
Currently, we incorrectly update exit blocks of loops when there are multiple
edges from a single exiting block to the exit block. This can happen when we
have switches as the terminator of the exiting blocks.
The fix here is to correctly update the phi nodes in the exit block, and remove
all incoming values *except* for one which is from the preheader.
Note: Currently, this error can manifest only while deleting non-executed loops. However, it
is possible to trigger this error in invariant loops, once we enhance the logic
around the exit conditions for the loop check.
Reviewers: chandlerc, dberlin, sanjoy, efriedma
Reviewed by: efriedma
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D34516
llvm-svn: 306048
Summary:
InstCombine likes to turn (icmp eq (and X, C1), 0) into (icmp slt (trunc (X)), 0) sometimes. This breaks foldSelectICmpAndOr's ability to recognize (select (icmp eq (and X, C1), 0), Y, (or Y, C2))->(or (shl (and X, C1), C3), y).
This patch tries to recover this. I had to flip around some of the early out checks so that I could create a new And instruction during the compare processing without it possibly never getting used.
Reviewers: spatel, majnemer, davide
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D34184
llvm-svn: 306029
