This makes sure that alloca() function calls properly probe the
stack as needed.
Differential Revision: https://reviews.llvm.org/D42356
llvm-svn: 325433
Summary:
The assert for a DISubrange's CountVarDIE to be available fails
when the dbg.value() has been optimized away for any reason.
Having the assert for that is a little heavy, so instead removing
it now in favor of not generating the 'count' expression.
Addresses http://llvm.org/PR36263 .
Reviewers: aprantl, dblaikie, probinson
Reviewed By: aprantl
Subscribers: JDevlieghere, llvm-commits, dstenb
Differential Revision: https://reviews.llvm.org/D43387
llvm-svn: 325427
This reverts commit r323991.
This commit breaks target that don't model all the register constraints
in TableGen. So far the workaround was to set the
hasExtraXXXRegAllocReq, but it proves that it doesn't cover all the
cases.
For instance, when mutating an instruction (like in the lowering of
COPYs) the isRenamable flag is not properly updated. The same problem
will happen when attaching machine operand from one instruction to
another.
Geoff Berry is working on a fix in https://reviews.llvm.org/D43042.
llvm-svn: 325421
Sadly, r324359 caused at least PR36312. There is a patch out for review
but it seems to be taking a bit and we've already had these crashers in
tree for too long. We're hitting this PR in real code now and are
blocked on shipping new compilers as a consequence so I'm reverting us
back to green.
Sorry for the churn due to the stacked changes that I had to revert. =/
llvm-svn: 325420
Based off the DemandedElts mask the and UNDEF elements returned from the SimplifyDemandedVectorElts calls to the shuffle operands, we can attempt to simplify the shuffle mask.
I had to be very conservative here as accepting post-legalized shuffle masks could cause problems for targets that legalize UNDEF mask elements back to inrange values (PowerPC), similarly combining to identity shuffle masks could cause too much UNDEF information to disappear for later combines.
llvm-svn: 325354
Summary:
Currently when expanding a SETCC node into a SELECT_CC, LLVM uses
an incorrect type for determining BooleanContent of the result. This
patch fixes the issue.
Fixes PR36079.
Reviewers: rogfer01, javed.absar, efriedma
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43282
llvm-svn: 325325
Same for the sign extend case.
Currently we check for multiple uses on the binop. Then we call ExtendUsesToFormExtLoad to capture SetCCs that use the load. So we only end up finding any setccs when the and has additional uses and the load is used by a setcc. I don't think the and having multiple uses is relevant here. I think we should only be checking for the load having multiple uses.
This changes an NVPTX test because we now find that the load has a second use by a truncate, but ExtendUsesToFormExtLoad only looks at setccs it can extend. All other operations just check isTruncateFree. Maybe we should allow widening of an existing truncate even if its not free?
Differential Revision: https://reviews.llvm.org/D43063
llvm-svn: 325289
This is mainly a move of simplifyShuffleOperands from DAGCombiner::visitVECTOR_SHUFFLE to create a more general purpose TargetLowering::SimplifyDemandedVectorElts implementation.
Further features can be moved/added in future patches.
Differential Revision: https://reviews.llvm.org/D42896
llvm-svn: 325232
Analysis of fails in the case of out of memory errors can be tricky on
Windows. Such error emerges at the point where memory allocation function
fails, but manifests itself when null pointer is used. These two points
may be distant from each other. Besides, next runs may not exhibit
allocation error.
Usual programming practice does not require checking result of 'operator
new' because it throws 'std::bad_alloc' in the case of allocation error.
However, LLVM is usually built with exceptions turned off, so 'new' can
return null pointer. This change installs custom new handler, which causes
fatal error in the case of out of memory. The handler is installed
automatically prior to call to 'main' during construction of a static
object defined in 'lib/Support/ErrorHandling.cpp'. If the application does
not use this file, the handler may be installed manually by a call to
'llvm::install_out_of_memory_new_handler', declared in
'include/llvm/Support/ErrorHandling.h".
There are calls to C allocation functions, malloc, calloc and realloc.
They are used for interoperability with C code, when allocated object has
variable size and when it is necessary to avoid call of constructors. In
many calls the result is not checked against null pointer. To simplify
checks, new functions are defined in the namespace 'llvm' with the
same names as these C function. These functions produce fatal error if
allocation fails. User should use 'llvm::malloc' instead of 'std::malloc'
in order to use the safe variant. This change replaces 'std::malloc'
in the cases when the result of allocation function is not checked against
null pointer.
Finally, there are plain C code, that uses malloc and similar functions. If
the result is not checked, assert statements are added.
Differential Revision: https://reviews.llvm.org/D43010
llvm-svn: 325224
Summary:
This patch adds templated functions to MachineIRBuilder for some opcodes
and adds pattern matcher support for G_AND and G_OR.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D43309
llvm-svn: 325162
Previously we only invalidated the pressure set limit cached when the TargetRegisterInfo pointer changes. But as reserved regs and callee saved regs are used as part of calculating the limits we should invalidate when those change too.
I encountered this when reverting a patch from the 6.0 branch. One of the x86 test files had a function that used rbp as a frame pointer, making it reserved. It was followed by another function which didn't use rbp but had the same TRI so the pressure set limit cache was not invalidated. If i removed the function that used rbp as a frame pointer from the file, the remaining function then got a different register pressure limit for the GR16 pressure set. This caused the machine scheduler to change the scheduling for the function. This was an unexpected change from just deleting a function.
I don't have a test case for trunk because the particular x86 test case is different enough from the 6.0 branch to not be affected now.
Differential Revision: https://reviews.llvm.org/D43274
llvm-svn: 325153
The prologue-end line record must be emitted after the last
instruction that is part of the function frame setup code and before
the instruction that marks the beginning of the function body.
Patch by Carlos Alberto Enciso!
Differential Revision: https://reviews.llvm.org/D41762
llvm-svn: 325143
When creating high MachineMemOperand for MSTORE/MLOAD we supply
it with the original PointerInfo, while the pointer itself had been incremented.
The patch adds the proper offset to the PointerInfo.
llvm-svn: 325135
Preserve debug info from a dead 'and' instruction with a constant.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D43163
llvm-svn: 325119
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
* Document most API's
* Delete a useless function call
* Fix a discrepancy between the single and multi-opcode variants of
getActionDefinitions().
The multi-opcode variant now requires that more than one opcode is requested.
Previously it acted much like the single-opcode form but unnecessarily
enforced the requirements of the multi-opcode form.
llvm-svn: 325067
Also make a drive-by-fix of a bug in the subregister scan code that
only triggers with an incomplete or otherwise very irregular machine
description.
rdar://problem/37404493
This re-applies r324972 with an early exit in the case of a complete
failure to make this commit NFC again as intended.
llvm-svn: 325041
Summary:
If the and has an additional use we shouldn't invert it. That creates an additional instruction.
While there add a one use check to the transform above that looked similar.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43225
llvm-svn: 325019
The bug has been lying dormant, but apparently was never exposed, until
after rL324941 because we didn't return the correct result
for shifts with undef operands.
llvm-svn: 325010
Here are the number of additional debug values salvaged in a stage2
build of clang:
63 SALVAGE: MUL
1250 SALVAGE: SDIV
(No values were salvaged from `srem` instructions in this experiment,
but it's a simple case to handle so we might as well.)
llvm-svn: 324976
Here are the number of additional debug values salvaged in a stage2
build of clang:
1912 SALVAGE: ASHR
405 SALVAGE: LSHR
249 SALVAGE: SHL
llvm-svn: 324975
Also make a drive-by-fix of a bug in the subregister scan code that
only triggers with an incomplete or otherwise very irregular machine
description.
rdar://problem/37404493
llvm-svn: 324972
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
creation of memcpys in the SafeStack pass to set the alignment of the destination object to
its stack alignment while separately setting the source byval arguments alignment to its
alignment.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. (rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: eugenis, bollu
Reviewed By: eugenis
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42710
llvm-svn: 324955
This started by noticing that scalar and vector types were producing different results with div ops in PR36305:
https://bugs.llvm.org/show_bug.cgi?id=36305
...but the problem is bigger. I couldn't keep it straight without a table, so I'm attaching that as a PDF to
the review. The x86 tests in undef-ops.ll correspond to that table.
Green means that instsimplify and the DAG agree on the result for all types.
Red means the DAG was returning undef when IR was not.
Yellow means the DAG was returning a non-undef result when IR returned undef.
This patch assumes that we're currently doing the right thing in IR.
Note: I couldn't find any problems with lowering vector constants as the code comments were warning,
but those comments were written long ago in rL36413 .
Differential Revision: https://reviews.llvm.org/D43141
llvm-svn: 324941
If merging them, the dllexport attribute needs to be brought along
to the new GlobalAlias.
Differential Revision: https://reviews.llvm.org/D43192
llvm-svn: 324937
Rather than encode the absence of a checksum with a Kind variant, instead put
both the kind and value in a struct and wrap it in an Optional.
Differential Revision: http://reviews.llvm.org/D43043
llvm-svn: 324928
Armv8.1-A added an atomic load-clear instruction (which performs bitwise
and with the complement of it's operand), but not a load-and
instruction. Our current code-generation for atomic load-and always
inserts an MVN instruction to invert its argument, even if it could be
folded into a constant or another instruction.
This adds lowering early in selection DAG to convert a load-and
operation into an xor with -1 and a load-clear, allowing the normal DAG
optimisations to work on it.
To do this, I've had to add a new ISD opcode, ATOMIC_LOAD_CLR. I don't
see any easy way to do this with an AArch64-specific ISD node, because
the code-generation for atomic operations assumes the SDNodes are of
type AtomicSDNode.
I've left the old tablegen patterns in because they are still needed for
global isel.
Differential revision: https://reviews.llvm.org/D42478
llvm-svn: 324908
Add a common -trap-unreachable option, similar to the target
specific hexagon equivalent, which has been replaced. This
turns unreachable instructions into traps, which is useful for
debugging.
Differential Revision: https://reviews.llvm.org/D42965
llvm-svn: 324880
Instead of reserving 0xF00 bytes for the fixed length portion of the CodeView
symbol name, calculate the actual length of the fixed length portion.
Differential Revision: https://reviews.llvm.org/D42125
llvm-svn: 324850
This reverses instcombine's demanded bits' transform which always tries to clear bits in constants.
As noted in PR35792 and shown in the test diffs:
https://bugs.llvm.org/show_bug.cgi?id=35792
...we can do better in codegen by trying to form -1. The x86 sub test shows a missed opportunity.
I did investigate changing instcombine's behavior, but it would be more work to change
canonicalization in IR. Clearing bits / shrinking constants can allow killing instructions,
so we'd have to figure out how to not regress those cases.
Differential Revision: https://reviews.llvm.org/D42986
llvm-svn: 324839
This allows us to recognise more saturation patterns and also simplify some MINMAX codegen that was failing to combine CMPGE comparisons to a legal CMPGT.
Differential Revision: https://reviews.llvm.org/D43014
llvm-svn: 324837
SelectionDAG::getBoolConstant was recently introduced. At the time I didn't know getConstTrueVal existed, but I think getBoolConstant is better as it will use the source VT to make sure it can properly detect floating point if it is configured differently.
llvm-svn: 324832
