ReadExtFeature provides equivalent functionality. Also fix a but in
ReadExtFeature, which prevented it from being used for auxv data (it
contains nul characters).
The previous version of the patch did not update the definitions in
conditionally compiled code. This patch includes changes to ARC and
windows targets.
Original commit message was:
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
A Mach-O corefile has an array of memory segments, representing
the memory of the process at the point of the capture. Each segment
has a virtual address + size, and a file offset + size. The file
size may be less than the virtual address size, indicating that
the memory was unavailable. When ProcessMachCore::DoLoadCore scans
this array of memory segments, it builds up a table to translate
virtual addresses to file offsets, for memory read requests.
This lookup table combines contiguous memory segments into a single
entry, to reduce the number of entries (some corefile writers will
emit a separate segement for each virtual meory page).
This contiguous check wasn't taking into account a segment that
isn't present in the corefile, e.g. filesize==0, and every contiguous
memory segment after that point would result in lldb reading the
wrong offset of the file because it didn't account for this.
I'd like to have an error message when someone tries to read memory from
one of these segments, instead of returning all zeroes, so this patch
intentionally leaves these out of the vmaddr -> fileoff table (and
avoids combining them with segments that actually do exist in the
corefile).
I'm a little unsure of writing a test for this one; I'd have to do
a yaml2obj of a corefile with the problem, or add an internal mode
to the Mach-O process save-core where it could write a filesize==0
segment while it was writing one.
rdar://83382487
This reverts commit 00e704bf08.
This commit should should have updated
llvm/llvm-project/lldb/source/Plugins/ABI/ARC/ABISysV_arc.cpp like the other
architectures.
PT_COREDUMP is a relatively recent addition. Use an #ifdef to skip it
if the underlying system does not support it.
Differential Revision: https://reviews.llvm.org/D111214
These were added to support some mips registers on linux, but linux mips
support has now been removed due.
They are still referenced in the freebds mips implementation, but the
completeness of that implementation is also unknown. All other
architectures just set these fields to zero, which is a cause of
significant bloat in our register info definitions.
Arm also has registers with variable sizes, but they were implemented in
a more gdb-compatible fashion and don't use this feature.
Differential Revision: https://reviews.llvm.org/D110914
This patch allows LLDB to accept register sizes which are not aligned
to 8 bits bitsize boundary. This fixes a crash in LLDB when connecting
to OpenOCD stub. GDB xml description allows for non-aligned bit lengths
but they are rounded off to nearest byte during transfer. In case of
OpenOCD some of SOC specific system registers were less than a single
byte in length and were causing LLDB to crash.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D111131
Move DynamicRegisterInfo from the internal lldbPluginProcessUtility
library to the public lldbTarget library. This is a prerequisite
towards ABI plugin changes that are going to pass DynamicRegisterInfo
parameters.
Differential Revision: https://reviews.llvm.org/D110942
.. and reduce the scope of others. They don't follow llvm coding
standards (which say they should be used only when the same effect
cannot be achieved with the static keyword), and they set a bad example.
Usage of aux_size is guarded against elsewhere in this file, but is missing here.
Reviewed By: wallace
Differential Revision: https://reviews.llvm.org/D110269
Original Author: calebzulawski
Move the "slice" and "composite" handling into separate methods to avoid
if/else hell. Use more LLVM types whenever possible. Replace printf()s
with llvm::Error combined with LLDB logging.
Differential Revision: https://reviews.llvm.org/D110619
We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.
It also complicates making further changes to stop reply packet
handling, which is what I am about to do.
Differential Revision: https://reviews.llvm.org/D110553
Add a convenience method to add supplementary registers that takes care
of adding invalidate_regs to all (potentially) overlapping registers.
Differential Revision: https://reviews.llvm.org/D110023
Add a llvm::Split() implementation that can be used via range-for loop,
e.g.:
for (StringRef x : llvm::Split("foo,bar,baz", ','))
...
The implementation uses an additional SplittingIterator class that
uses StringRef::split() internally.
Differential Revision: https://reviews.llvm.org/D110496
Replace the uses of StringConvert combined with hand-rolled array
splitting with llvm::StringRef.split() and llvm::to_integer().
Differential Revision: https://reviews.llvm.org/D110472
Replace misc. StringConvert uses with llvm::to_integer()
and llvm::to_float(), except for cases where further refactoring is
planned. The purpose of this change is to eliminate the StringConvert
API that is duplicate to LLVM, and less correct in behavior at the same
time.
Differential Revision: https://reviews.llvm.org/D110447
If the remote gdbserver's qfThreadInfo reply has a trailing comma,
GDBRemoteCommunicationClient::GetCurrentProcessAndThreadIDs will return
an empty vector of thread ids. This will cause lldb to recurse through
three functions trying to get the list of threads, until it blows its
stack and crashes.
A trailing comma is a malformed response, but it shouldn't cause lldb to
crash. This patch will return the tids received before the malformed
response.
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D109937
Switch the gdb-remote client logic to use local (LLDB) register numbers
in value_regs/invalidate_regs rather than remote regnos. This involves
translating regnos received from lldb-server.
Differential Revision: https://reviews.llvm.org/D110027
Refactor remote register getters to collect them into a local
std::vector rather than adding them straight into DynamicRegisterInfo.
The purpose of this change is to lay groundwork for switching value_regs
and invalidate_regs to use local LLDB register numbers rather than
remote numbers.
Differential Revision: https://reviews.llvm.org/D110025
Switch the gdb-remote client logic to use local (LLDB) register numbers
in value_regs/invalidate_regs rather than remote regnos. This involves
translating regnos received from lldb-server.
Differential Revision: https://reviews.llvm.org/D110027
Refactor remote register getters to collect them into a local
std::vector rather than adding them straight into DynamicRegisterInfo.
The purpose of this change is to lay groundwork for switching value_regs
and invalidate_regs to use local LLDB register numbers rather than
remote numbers.
Differential Revision: https://reviews.llvm.org/D110025
Set value_regs and invalidate_regs in RegisterInfo pushed onto m_regs
to nullptr, to ensure that the temporaries passed there are not
accidentally used.
Differential Revision: https://reviews.llvm.org/D109879
Always send PID in the detach packet when multiprocess extensions are
enabled. This is required by qemu's GDB server, as plain 'D' packet
results in an error and the emulated system is not resumed.
Differential Revision: https://reviews.llvm.org/D110033
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
Remove the name and alt_name parameters from AddRegister() and instead
pass them via RegisterInfo.name and .alt_name fields. This makes
the API simpler and removes some duplication.
Differential Revision: https://reviews.llvm.org/D109872
Try determining the process architecture from <architecture/> tag
unconditionally, rather than for very specific cases. Generic gdbserver
implementations do not support LLDB-specific packets used to determine
the process architecture, therefore this fallback is necessary to
support architecture-specific behavior on these targets. Rather than
maintaining a mapping of all known architectures, just try mapping
the GDB values into triplets, as that is going to work most of the time.
This change is confirmed to fix LLDB against gdbserver when debugging
i386 and aarch64 executables.
Differential Revision: https://reviews.llvm.org/D109272
Remove redundant register alt_names that correspond to their respective
generic names. D108554 makes it possible to query registers through
their generic names directly, therefore making repeating them via
alt_name unnecessary.
While at it, also remove alt_names that are equal to register names
on PPC.
This patch does not alter register definitions where the generic names
are listed as primary names, and other names are provided as alt_name
(e.g. ARM).
Differential Revision: https://reviews.llvm.org/D109626
In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.
Differential Revision: https://reviews.llvm.org/D109600
GDB uses normalized errno values for vFile errors. Implement
the translation between them and system errno values in the gdb-remote
plugin.
Differential Revision: https://reviews.llvm.org/D108148
Fall back to QEnvironmentHexEncoded if QEnvironment is not supported.
The latter packet is an LLDB extension, while the former is universally
supported.
Add tests for both QEnvironment and QEnvironmentHexEncoded packets,
including both use due to characters that need escaping and fallback
when QEnvironment is not supported.
Differential Revision: https://reviews.llvm.org/D108018
Implement the simpler vRun packet and prefer it over the A packet.
Unlike the latter, it tranmits command-line arguments without redundant
indices and lengths. This also improves GDB compatibility since modern
versions of gdbserver do not implement the A packet at all.
Make qLaunchSuccess not obligatory when using vRun. It is not
implemented by gdbserver, and since vRun returns the stop reason,
we can assume it to be successful.
Differential Revision: https://reviews.llvm.org/D107931
Add a GDB-compatible fallback to vFile:fstat for vFile:mode, and to
vFile:open for vFile:exists. Note that this is only partial fallback,
as it fails if the file cannot be opened.
Differential Revision: https://reviews.llvm.org/D107811
Add two new commands 'platform get-file-permissions' and 'platform
file-exists' for the respective bits of LLDB protocol. Add tests for
them. Fix error handling in GetFilePermissions().
Differential Revision: https://reviews.llvm.org/D107809
Implement a fallback to getting the file size via vFile:stat packet
when the remote server does not implement vFile:size. This makes it
possible to query file sizes from remote gdbserver.
Note that unlike vFile:size, the fallback will not work if the server is
unable to open the file.
While at it, add a few tests for the 'platform get-size' command.
Differential Revision: https://reviews.llvm.org/D107780
