If adding a user commands fails because a command with the same name
already exists, we only say that "force replace is not set" without
telling the user _how_ to set it. There are two ways to do so; this
commit changes the error message to mention both.
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
With the combination of an early return and removing an else-after-return, it
becomes evident that there is unreachable code in the function being changed.
The existing code was taking three substrings from a regex match and converting
to std::strings prior to using them. This may have been done to address
null-termination concerns, but this is not the case:
1. `name` was being used to call `c_str()` and then implicitly converted back to
a `StringRef` on the call to `ToAddress`. While the path `const char *` ->
`StringRef` requires null-termination, we can simply use the original StringRef.
2. `str_offset` was being converted back to a StringRef in order to call a
member method. Member methods can't handle non-null termination.
3. `sign` simply had it's 0-th element accessed.
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f)
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
This patch makes the various Scripted Interface base class abstract by
making the `CreatePluginObject` method pure virtual.
This means that we cannot construct a Scripted Interface base class
instance, so this patch also updates the various
`ScriptedInterpreter::CreateScripted*Interface` methods to return a
`nullptr` instead.`
This patch also removes the `ScriptedPlatformInterface` member from the
`ScriptInterpreter` class since it the interpreter can be owned by the
`ScriptedPlatform` instance itself, like we do for `ScriptedProcess`
objects.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch makes ScriptedThreadPlan conforming to the ScriptedInterface
& ScriptedPythonInterface facilities by introducing 2
ScriptedThreadPlanInterface & ScriptedThreadPlanPythonInterface classes.
This allows us to get rid of every ScriptedThreadPlan-specific SWIG
method and re-use the same affordances as other scripting offordances,
like Scripted{Process,Thread,Platform} & OperatingSystem.
To do so, this adds new transformer methods for `ThreadPlan`, `Stream` &
`Event`, to allow the bijection between C++ objects and their python
counterparts.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
[lldb] Part 1 of 2 - Refactor `CommandObject::Execute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 2 refactors the `CommandObject::DoExecute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69991](https://github.com/llvm/llvm-project/pull/69991)
rdar://117378957
This reverts commit a7b78cac9a.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
The problem is that the when the "attach" command is initiated, the
ExecutionContext for the command has a process - it's the exited one
from the previour run. But the `attach wait` creates a new process for
the attach, and then errors out instead of interrupting when it finds
that its process and the one in the command's ExecutionContext don't
match.
This change checks that if we're returning a target from
GetExecutionContext, we fill the context with it's current process, not
some historical one.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
Previously we would check all built-ins first for suggestions,
then check built-ins and aliases. This meant that if you had
an alias brkpt -> breakpoint, "br" would complete to "breakpoint".
Instead of giving you the choice of "brkpt" or "breakpoint".
ConstString can be implicitly converted into a llvm::StringRef. This is
very useful in many places, but it also hides places where we are
creating a ConstString only to use it as a StringRef for the entire
lifespan of the ConstString object.
I locally removed the implicit conversion and found some of the places we
were doing this.
Differential Revision: https://reviews.llvm.org/D159237
StreamFile subclasses Stream (from lldbUtility) and is backed by a File
(from lldbHost). It does not depend on anything from lldbCore or any of its
sibling libraries, so I think it makes sense for this to live in
lldbHost instead.
Differential Revision: https://reviews.llvm.org/D157460
/data/llvm-project/lldb/source/Interpreter/OptionValue.cpp:28:3: error: 'scoped_lock' may not intend to support class template argument deduction [-Werror,-Wctad-maybe-unsupported]
std::scoped_lock lock(m_mutex, other.m_mutex);
^
/opt/rh/gcc-toolset-12/root/usr/lib/gcc/x86_64-redhat-linux/12/../../../../include/c++/12/mutex:692:11: note: add a deduction guide to suppress this warning
class scoped_lock
^
1 error generated.
/data/llvm-project/lldb/source/Target/ThreadList.cpp:739:5: error: 'scoped_lock' may not intend to support class template argument deduction [-Werror,-Wctad-maybe-unsupported]
std::scoped_lock guard(GetMutex(), rhs.GetMutex());
^
/opt/rh/gcc-toolset-12/root/usr/lib/gcc/x86_64-redhat-linux/12/../../../../include/c++/12/mutex:692:11: note: add a deduction guide to suppress this warning
class scoped_lock
^
1 error generated.
Thread sanitizer is catching data races in OptionValue, protect accesses
to OptionValue with a mutex.
Differential Revision: https://reviews.llvm.org/D157041
Also, make it possible for new Targets which haven't been added to
the TargetList yet to check for interruption, and add a few more
places in building modules where we can check for interruption.
Differential Revision: https://reviews.llvm.org/D154542
Summary: No need to create a ConstString, `GetName` already returns a StringRef.
Reviewers: JDevlieghere, mib, jasonmolenda
Subscribers:
Differential Revision: https://reviews.llvm.org/D154386
These don't need to be ConstStrings. They don't really benefit much from
deduplication and comparing them isn't on a hot path, so they don't
really benefit much from quick comparisons.
Differential Revision: https://reviews.llvm.org/D152331
Most users of this stick it into a StringRef. The one user that doesn't
just tries to get the length out of it, which we can precompute by
putting it in a constexpr StringLiteral.
Differential Revision: https://reviews.llvm.org/D151951
Currently the expression parser prints a mostly useless generic error before printing the compiler error:
(lldb) p 1+x)
error: expression failed to parse:
error: <user expression 18>:1:3: use of undeclared identifier 'x'
1+x)
^
This is distracting and as far as I can tell only exists to work
around the fact that the first "error: " is unconditionally injected
by CommandReturnObject. The solution is not very elegant, but the
result looks much better.
(Partially addresses rdar://110492710)
Differential Revision: https://reviews.llvm.org/D152590
In the interest of keeping the ConstString StringPool small, this patch
aims to remove the use of ConstString from OptionValueProperties.
We can maintain quick lookups by using an llvm::StringMap to find the
correct index by name.
Differential Revision: https://reviews.llvm.org/D152210
This patch should allow the user to set specific auto-completion type
for their custom commands.
To do so, we had to hoist the `CompletionType` enum so the user can
access it and add a new completion type flag to the CommandScriptAdd
Command Object.
So now, the user can specify which completion type will be used with
their custom command, when they register it.
This also makes the `crashlog` custom commands use disk-file completion
type, to browse through the user file system and load the report.
Differential Revision: https://reviews.llvm.org/D152011
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch refactors the `StructuredData::Integer` class to make it
templated, makes it private and adds 2 public specialization for both
`int64_t` & `uint64_t` with a public type aliases, respectively
`SignedInteger` & `UnsignedInteger`.
It adds new getter for signed and unsigned interger values to the
`StructuredData::Object` base class and changes the implementation of
`StructuredData::Array::GetItemAtIndexAsInteger` and
`StructuredData::Dictionary::GetValueForKeyAsInteger` to support signed
and unsigned integers.
This patch also adds 2 new `Get{Signed,Unsigned}IntegerValue` to the
`SBStructuredData` class and marks `GetIntegerValue` as deprecated.
Finally, this patch audits all the caller of `StructuredData::Integer`
or `StructuredData::GetIntegerValue` to use the proper type as well the
various tests that uses `SBStructuredData.GetIntegerValue`.
rdar://105575764
Differential Revision: https://reviews.llvm.org/D150485
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Fix a mutation of `CommandAlias::m_option_args_sp`, which resulted in cases where
aliases would fail to run on second, and subsequent times.
For example, an alias such as:
```
command alias p1 p 1
```
When run the second time, the following error would be reported to the user:
```
error: expression failed to parse:
error: <user expression 1>:1:1: expression is not assignable
-- 1
^ ~
```
To fix this, `CommandAlias::Desugar` now constructs options to a freshly constructed
vector, rather than by appending to the results of `GetOptionArguments`.
rdar://107770836
Differential Revision: https://reviews.llvm.org/D150078
Use templates to simplify {Get,Set}PropertyAtIndex. It has always
bothered me how cumbersome those calls are when adding new properties.
After this patch, SetPropertyAtIndex infers the type from its arguments
and GetPropertyAtIndex required a single template argument for the
return value. As an added benefit, this enables us to remove a bunch of
wrappers from UserSettingsController and OptionValueProperties.
Differential revision: https://reviews.llvm.org/D149774
The majority of call sites are nullptr as the execution context.
Refactor OptionValueProperties to make the argument optional and
simplify all the callers.
