Absolute symbol should contain its absolute value, but LLD had been
writing its RVA instead. Write its VA instead.
DefinedSynthetic were being skipped before with the reasoning "Relative
symbols are unrepresentable in a COFF symbol table", which is only true
if the RVA points to outside of a section. LLD does create synthetic
symbols which points to actual data chunks (typical for symbols embedded
into the load config directory). Write these symbols to the COFF symbol
table too.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D134462
Control Flow Guard requires specific flags and VA's be included in the
load config directory to be functional. In case CFGuard is enabled via
linker flags, we can check to make sure this is the case and give the
user a warning if otherwise.
MSVC provides a proper `_load_config_used` by default, so this is more
relevant for the MinGW target in which current versions of mingw-w64
does not provide this symbol.
The checks (only if CFGuard is enabled) include:
- The `_load_config_used` struct shall exist.
- Alignment of the `_load_config_used` struct (shall be aligned to
pointer size.)
- The `_load_config_used` struct shall be large enough to contain the
required fields.
- The values of the following fields are checked against the expected
values:
- GuardCFFunctionTable
- GuardCFFunctionCount
- GuardFlags
- GuardAddressTakenIatEntryTable
- GuardAddressTakenIatEntryCount
- GuardLongJumpTargetTable
- GuardLongJumpTargetCount
- GuardEHContinuationTable
- GuardEHContinuationCount
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D133099
Import thunks themselves contain a jump or branch, which is code by
nature. Therefore the import thunk symbol should be marked as function
type in the symbol table to help with debugging.
The `__imp_` import symbol associated to the import thunk is also useful
for debugging. However, when the import symbol isn't directly referenced
outside of the import thunk, it doesn't normally get added to the symbol
table. This change teaches LLD to add the import symbol explicitly.
Reviewed By: mstorsjo
Differential Revision: https://reviews.llvm.org/D134169
Bug: An assertion fails:
Assertion failed: isa<To>(Val) && "cast<Ty>() argument of incompatible type!",
file C:\Users\<user>\prog\llvm\llvm-git-lld-bug\llvm\include\llvm/Support/Casting.h, line 578
Bug is triggered, if
- a map file is requested with /MAP, and
- Architecture is ARMv7, Thumb, and
- a relative jump (branch instruction) is greater than 16 MiB (2^24)
The reason for the Bug is:
- a Thunk is created for the jump
- a Symbol for the Thunk is created
- of type `DefinedSynthetic`
- in file `Writer.cpp`
- in function `getThunk`
- the Symbol has no name
- when creating the map file, the name of the Symbol is queried
- the function `Symbol::computeName` of the base class `Symbol`
casts the `this` pointer to type `DefinedCOFF` (a derived type),
but the acutal type is `DefinedSynthetic`
- The in the llvm::cast an assertion fails
Changes:
- Modify regression test to trigger this bug
- Give the symbol pointing to the thunk a name, to fix the bug
- Add assertion, that only DefinedCOFF symbols are allowed to have an
empty name, when the constructor of the base class Symbol is executed
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D133201
This also modifies llvm-readobj to be more future-proof when printing
the guard FIDs table by calculating the entry size correctly according
to MS docs.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D132924
This reverts commit 9ffeaaa0ea.
This fixes debugging large executables with lldb and gdb.
When StringTableBuilder is used, the string offsets for any string
can point anywhere in the string table - while previously, all strings
were inserted in order (without deduplication and tail merging).
For symbols, there's no complications in encoding the string offset;
the offset is encoded as a raw 32 bit binary number in half of the
symbol name field.
For sections, the string table offset is written as
"/<decimaloffset>", but if the decimal offset would be larger than
7 digits, it's instead written as "//<base64offset>". Tools that
operate on object files can handle the base64 offset format, but
apparently neither lldb nor gdb expect that syntax when locating the
debug information section. Prior to the reverted commit, all long
section names were located at the start of the string table, so
their offset never exceeded the range for the decimal syntax.
Just reverting this change for now, as the actual benefit from it
was fairly modest.
Longer term, lld could write all long section names unoptimized
at the start of the string table, followed by all the strings for
symbol names, with deduplication and tail merging. And lldb and
gdb could be fixed to handle sections with the base64 offset syntax.
This fixes https://github.com/mstorsjo/llvm-mingw/issues/289.
So far, we sort all discardable sections at the end, with only some
extra logic to make sure that the .reloc section is at the start
of that group of sections. But if there are other discardable
sections, other than .reloc, they must also be ordered before
.debug_* sections, to avoid leaving gaps if the executable is
stripped.
(Stripping executables doesn't remove all discardable sections,
only the ones named .debug_*).
Rust binaries seem to include a .rmeta section, which is marked
discardable. This fixes stripping such binaries if built with
dwarf debug info included.
This fixes issues observed in MSYS2 in
https://github.com/msys2/MINGW-packages/pull/10555.
Differential Revision: https://reviews.llvm.org/D120805
This does tail merging (and deduplication) of the strings.
On a statically linked clang.exe, this shrinks the ~17 MB string
table by around 0.5 MB. This adds ~160 ms to the linking time
which originally was around 950 ms.
For cases where `-debug:symtab` or `-debug:dwarf` isn't set, the
string table is only used for long section names, where this
shouldn't make any difference at all.
Differential Revision: https://reviews.llvm.org/D120677
The previous code used an unbounded sprintf, which in theory can
overflow, writing either the null terminator or the last digits
into the next struct member.
In practice, in LLD, all long section names are written sequentially
first at the start of the string table, followed by all the long
symbol names. Due to this, even if the total string table would
end up large, the long section names have fairly short offsets,
which is why this hasn't been an issue in practice.
I don't think it's worth trying to write a test that produces an
executable with enough long section names to make the section names
themselves exceed 10^6 bytes, which is currently necessary to trigger
faults with the previous form.
Differential Revision: https://reviews.llvm.org/D120676
Move all variables at file-scope or function-static-scope into a hosting structure (lld::CommonLinkerContext) that lives at lldMain()-scope. Drivers will inherit from this structure and add their own global state, in the same way as for the existing COFFLinkerContext.
See discussion in https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html
Differential Revision: https://reviews.llvm.org/D108850
The section symbols aren't of much practical use when looking at
a linked image. This shrinks one observed mingw style unstripped
binary by 14%.
IMAGE_SYM_CLASS_LABEL is in spirit the same as a temporary assembler
label that isn't emitted on the object file level at all.
Differential Revision: https://reviews.llvm.org/D113866
Original commit description:
[LLD] Remove global state in lld/COFF
This patch removes globals from the lldCOFF library, by moving globals
into a context class (COFFLinkingContext) and passing it around wherever
it's needed.
See https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html for
context about removing globals from LLD.
I also haven't moved the `driver` or `config` variables yet.
Differential Revision: https://reviews.llvm.org/D109634
This reverts commit a2fd05ada9.
Original commits were b4fa71eed3
and e03c7e367a.
This patch removes globals from the lldCOFF library, by moving globals
into a context class (COFFLinkingContext) and passing it around wherever
it's needed.
See https://lists.llvm.org/pipermail/llvm-dev/2021-June/151184.html for
context about removing globals from LLD.
I also haven't moved the `driver` or `config` variables yet.
Differential Revision: https://reviews.llvm.org/D109634
GNU ld.bfd supports linking directly against DLLs without using an
import library, and some projects have picked up on this habit.
(There's no one single unsurmountable issue with using import
libraries, but this is a regularly surfacing missing feature.)
As long as one is linking by name (instead of by ordinal), the DLL
export table contains most of the information needed. (One can
inspect what section a symbol points at, to see if it's a function
or data symbol. The practical implementation of this loops over all
sections for each symbol, but as long as they're not very many, that
should hopefully be tolerable performance wise.)
One exception where the information in the DLL isn't entirely enough
is on i386 with stdcall functions; depending on how they're done,
the exported function name can be a plain undecorated name, while
the import library would contain the full decorated symbol name. This
issue is addressed separately in a different patch.
This is implemented mimicing the structure of a regular import library,
with one InputFile corresponding to the static archive that just adds
lazy symbols, which then are fetched when they are needed. When such
a symbol is fetched, we synthesize a coff_import_header structure
in memory and create a regular ImportFile out of it.
The implementation could be even smaller by just creating ImportFiles
for every symbol available immediately, but that would have the
drawback of actually ending up importing all symbols unless running
with GC enabled (and mingw mode defaults to having it disabled for
historical reasons).
Differential Revision: https://reviews.llvm.org/D104530
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
This broke both Firefox and Chromium (PR47905) due to what seems like dllimport
function not being handled correctly.
> This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
> Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
>
> Reviewed By: rnk
>
> Differential Revision: https://reviews.llvm.org/D87544
This reverts commit cfd8481da1.
Match MSVC linker output - align all debug directories on four bytes,
while removing debug directory alignment. This would have the same
effect on CETCOMPAT support as D89919.
Chromium bug: https://crbug.com/1136664
Differential Revision: https://reviews.llvm.org/D89921
Fixes https://bugs.llvm.org/show_bug.cgi?id=46473
LLD wasn't previously specifying any specific alignment in the TLS table's Characteristics field so the loader would just assume the default value (16 bytes). This works most of the time except if you have thread locals that want specific higher alignments (e.g. 32 as in the bug) *even* if they specify an alignment on the thread local. This change updates LLD to take the max alignment from tls section.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D88637
Revert individual wip commits and will instead follow up with a
single commit with all the changes. Makes cherry-picking easier
and will contain all the right tags.
This reverts commit 32a4ad3b6c.
This reverts commit 7fe13af676.
This reverts commit 51fbc1bef6.
This reverts commit f80950a8bb.
This reverts commit 0778cad9f3.
This reverts commit 8b70d527d7.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46473
LLD wasn't previously specifying any specific alignment in the TLS table's Characteristics field so the loader would just assume the default value (16 bytes). This works most of the time except if you have thread locals that want specific higher alignments (e.g. 32 as in the bug) *even* if they specify an alignment on the thread local. This change updates LLD to take the max alignment from tls section.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D88637
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
The MinGW driver has separate options for OS and subsystem version.
Having this available in lld-link allows the MinGW driver to both match
GNU ld better and simplifies the code for merging two (potentially
mismatching) arguments into one.
Differential Revision: https://reviews.llvm.org/D88802
This patch adds support for creating Guard Address-Taken IAT Entry Tables (.giats$y sections) in object files, matching the behavior of MSVC. These contain lists of address-taken imported functions, which are used by the linker to create the final GIATS table.
Additionally, if any DLLs are delay-loaded, the linker must look through the .giats tables and add the respective load thunks of address-taken imports to the GFIDS table, as these are also valid call targets.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D87544
In lit tests, we run each LLD invocation twice (LLD_IN_TEST=2), without shutting down the process in-between. This ensures a full cleanup is properly done between runs.
Only active for the COFF driver for now. Other drivers still use LLD_IN_TEST=1 which executes just one iteration with full cleanup, like before.
When the environment variable LLD_IN_TEST is unset, a shortcut is taken, only one iteration is executed, no cleanup for faster exit, like before.
A public API, lld::safeLldMain(), is also available when using LLD as a library.
Differential Revision: https://reviews.llvm.org/D70378
The global variable outputSections in the COFF writer was not
cleared between runs which caused successive calls to lld::coff::link
to generate invalid binaries. These binaries when loaded would result
in "invalid win32 applications" and/or "bad image" errors.
Differential Revision: https://reviews.llvm.org/D86401
Previously this flag was just ignored. If set, set the
IMAGE_DLL_CHARACTERISTICS_NO_SEH bit, regardless of the normal safeSEH
machinery.
In mingw configurations, the safeSEH bit might not be set in e.g. object
files built from handwritten assembly, making it impossible to use the
normal safeseh flag. As mingw setups don't generally use SEH on 32 bit
x86 at all, it should be fine to set that flag bit though - hook up
the existing GNU ld flag for controlling that.
Differential Revision: https://reviews.llvm.org/D84701
Previously, lld would crash if the .pdata size was not an even multiple
of the expected .pdata entry size. This makes it error gracefully instead.
(We hit this in Chromium due to an assembler problem: https://crbug.com/1101577)
Differential revision: https://reviews.llvm.org/D83479
Allow disabling either the full auto import feature, or just
forbidding the cases that require runtime fixups.
As long as all auto imported variables are referenced from separate
.refptr$<name> sections, we can alias them on top of the IAT entries
and don't actually need any runtime fixups via pseudo relocations.
LLVM generates references to variables in .refptr stubs, if it
isn't known that the variable for sure is defined in the same object
module. Runtime pseudo relocs are needed if the addresses of auto
imported variables are used in constant initializers though.
Fixing up runtime pseudo relocations requires the use of
VirtualProtect (which is disallowed in WinStore/UWP apps) or
VirtualProtectFromApp. To allow any risk of ambiguity, allow
rejecting cases that would require this at the linker stage.
This adds support for the --disable-runtime-pseudo-reloc and
--disable-auto-import options in the MinGW driver (matching GNU ld.bfd)
with corresponding lld private options in the COFF driver.
Differential Revision: https://reviews.llvm.org/D78923
Essentially takes the lld/Common/Threads.h wrappers and moves them to
the llvm/Support/Paralle.h algorithm header.
The changes are:
- Remove policy parameter, since all clients use `par`.
- Rename the methods to `parallelSort` etc to match LLVM style, since
they are no longer C++17 pstl compatible.
- Move algorithms from llvm::parallel:: to llvm::, since they have
"parallel" in the name and are no longer overloads of the regular
algorithms.
- Add range overloads
- Use the sequential algorithm directly when 1 thread is requested
(skips task grouping)
- Fix the index type of parallelForEachN to size_t. Nobody in LLVM was
using any other parameter, and it made overload resolution hard for
for_each_n(par, 0, foo.size(), ...) because 0 is int, not size_t.
Remove Threads.h and update LLD for that.
This is a prerequisite for parallel public symbol processing in the PDB
library, which is in LLVM.
Reviewed By: MaskRay, aganea
Differential Revision: https://reviews.llvm.org/D79390
Added support for /map and /map:[filepath].
The output was derived from Microsoft's Link.exe output when using that same option.
Note that /MAPINFO support was not added.
The previous implementation of MapFile.cpp/.h was meant for /lldmap, and was renamed to LLDMapFile.cpp/.h
MapFile.cpp/.h is now for /MAP
However, a small fix was added to lldmap, replacing a std::sort with std::stable_sort to enforce reproducibility.
Differential Revision: https://reviews.llvm.org/D70557
Instead, use `using namespace lld(::coff)`, and fully qualify the names
of free functions where they are defined in cpp files.
This effectively reverts d79c3be618 to follow the new style guide added
in 236fcbc21a.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D74882
This change is for those who use lld as a library. Context:
https://reviews.llvm.org/D70287
This patch adds a new parmeter to lld::*::link() so that we can pass
an raw_ostream object representing stdout. Previously, lld::*::link()
took only an stderr object.
Justification for making stdoutOS and stderrOS mandatory: I wanted to
make link() functions to take stdout and stderr in that order.
However, if we change the function signature from
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stderrOS = llvm::errs());
to
bool link(ArrayRef<const char *> args, bool canExitEarly,
raw_ostream &stdoutOS = llvm::outs(),
raw_ostream &stderrOS = llvm::errs());
, then the meaning of existing code that passes stderrOS silently
changes (stderrOS would be interpreted as stdoutOS). So, I chose to
make existing code not to compile, so that developers can fix their
code.
Differential Revision: https://reviews.llvm.org/D70292
