This was originall reverted due to some test failures in
ModuleCache and TestCompDirSymlink. These issues have all
been resolved and the code now passes all tests.
Differential Revision: https://reviews.llvm.org/D30698
llvm-svn: 297300
If QPassSignals packaet is supported by lldb-server, lldb-client will
utilize it and ask the server to ignore signals that don't require stops
or notifications.
Such signals will be immediately re-injected into inferior to continue
normal execution.
Differential Revision: https://reviews.llvm.org/D30520
llvm-svn: 297231
this reverts r297116 because it breaks the unittests and
TestCompDirSymlink. The ModuleCache unit test is trivially fixable, but
the CompDirSymlink failure is a symptom of a deeper problem: llvm's stat
functionality is not a drop-in replacement for lldb's. The former is
based on stat(2) (which does symlink resolution), while the latter is
based on lstat(2) (which does not).
This also reverts subsequent build fixes (r297128, r297120, 297117) and
r297119 (Remove FileSpec dependency on FileSystem) which builds on top
of this.
llvm-svn: 297139
This deletes LLDB's FileType enumeration and replaces all
users, and all calls to functions that check whether a file
exists etc with corresponding calls to LLVM.
Differential Revision: https://reviews.llvm.org/D30624
llvm-svn: 297116
This functionality is subsumed by DataBufferLLVM, which is
also more efficient since it will try to mmap. However, we
don't yet support mmaping writable private sections, and in
some cases we were using ReadFileContents and then modifying
the buffer. To address that I've added a flag to the
DataBufferLLVM methods that allow you to map privately, which
disables the mmaping path entirely. Eventually we should teach
DataBufferLLVM to use mmap with writable private, but that is
orthogonal to this effort.
Differential Revision: https://reviews.llvm.org/D30622
llvm-svn: 297095
All references to Host and Core have been removed, so this
class can now safely be lowered into Utility.
Differential Revision: https://reviews.llvm.org/D30559
llvm-svn: 296909
Summary:
These two register contexts were identical, so this shouldn't cause any
regressions, but I'd appreciate it if you can check that this at least compiles.
Reviewers: emaste, sas
Subscribers: aemerson, rengolin, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D27126
llvm-svn: 296335
After a series of patches on the LLVM side to get the mmaping
code up to compatibility with LLDB's needs, it is now ready
to go, which means LLDB's custom mmapping code is redundant.
So this patch deletes it all and uses LLVM's code instead.
In the future, we could take this one step further and delete
even the lldb DataBuffer base class and rely entirely on
LLVM's facilities, but this is a job for another day.
Differential Revision: https://reviews.llvm.org/D30054
llvm-svn: 296159
Summary: QPassSignals package allows lldb client to tell lldb-server to ignore certain types of signals and re-inject them back to inferior without stopping execution.
Reviewers: jmajors, labath
Subscribers: danalbert, srhines, emaste, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30286
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 296101
Summary:
NetBSD 7.99.62 introduced Debug Registers interface similar to the FreeBSD one.
This interface will land NetBSD-8.0.
Introduce support for this interface in Register Context NetBSD x86_64 unconditionally as older versions of NetBSD will not be supported.
This change allows to reduce diff with other ports and remove local copy of the RegisterInfos_x86_64.h content.
NetBSD Register Context for 32-bit x86 support will be added later.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30287
llvm-svn: 296071
Summary:
This also removes magic rename code, which caused the channel to be
called "linux" when built on a linux machine, and "freebsd" when built
on a freebsd one, which seems unnecessary - registering a new channel is
sufficiently simple now that if we wish to log something extremely
os-specific, we can just create a new channel. None of the current
categories seem very specific to one OS or another.
Reviewers: emaste, krytarowski
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30250
llvm-svn: 295954
Summary:
When lldb-server is started with the -P <port> or -m/-M <min/max port> options to specify which ports are available for remote connections the child debug server is told what port it should listen on. In those cases lldb-server needs to wait for the child to report it’s port number as otherwise it can tell the lldb client that the child is up and listening before it is actually listening on that port. lldb-server already waits in the cases where a port wasn’t specified by waiting until the child reports the port it is using. It was skipping this synchronisation step when passed a port numbers as it knew what the port would be however it does need to ensure the child process has had time to open that port and waiting until the child reports the port number makes sure this has happened.
This patch just removes the one case where a child was spawned and lldb-server did not wait for it to report it’s port number before telling the client lldb process the child is ready to connect to.
This issue was discussed on lldb-dev in a thread here:
http://lists.llvm.org/pipermail/lldb-dev/2017-February/012002.html
Reviewers: clayborg
Reviewed By: clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30255
llvm-svn: 295947
Summary:
The main difference here is that in the WINLOG macros you can specify
log categories per call, whereas here you have to go the usual lldb
route of getting a Log* variable first. While this means you have to
write at least two statements, it usually means that each statement will
fit on a single line, whereas fitting the WINLOG invocation on a single
line was almost impossible. So the total size of code does not increase
even in functions with a single log statement, and functions with more
logging get shorter.
The downside here is reduced flexibility in specifying the log
categories, which a couple of functions used quite heavily (e.g.
RefreshStateAfterStop). For these I chose a single category used most
prominently and put everything into that, although a solution with
multiple log variables is definitely possible.
Reviewers: zturner, amccarth
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D30172
llvm-svn: 295822
Summary:
I originally set out to move the NameMatches closer to the relevant
function and add some unit tests. However, in the process I've found a
couple of bugs in the implementation:
- the early exits where not always correct:
- (test==pattern) does not mean the match will always suceed because
of regular expressions
- pattern.empty() does not mean the match will fail because the "" is
a valid prefix of any string
So I cleaned up those and added some tests. The only tricky part here
was that regcomp() implementation on darwin did not recognise the empty
string as a regular expression and returned an REG_EMPTY error instead.
The simples fix here seemed to be to replace the empty expression with
an equivalent non-empty one.
Reviewers: clayborg, zturner
Subscribers: mgorny, lldb-commits
Differential Revision: https://reviews.llvm.org/D30094
llvm-svn: 295651
Summary:
There have been a few new values added to a few LLVM enums
this change makes sure that LLDB code handles them correctly.
Reviewers: labath
Reviewed By: labath
Subscribers: lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D30005
Author: Eugene Zemtsov <ezemtsov@google.com>
llvm-svn: 295445
In the case we are stepping over the thread creation instruction, we
will end up calling Thread::SingleStep back-to-back twice (because of
the intermediate PTRACE_EVENT_CLONE stop). This will cause the cpu mask
to be set inappropriately (because the old SingleStepCheck object will
be destroyed after we create the new one), and the single-step will
fail.
Before the refactor the code was still incorrect in this case, but in a
different way (the thread was left with the incorrect mask after the
stepping was complete), so this was not easy to spot.
This fixes TestCreateDuringInstructionStep on the affected devices.
llvm-svn: 295440
While refactoring the code in r293046 I made a very basic error -
relying on destructor side-effects of a copyable object. Fix that and
make the object non-copyable.
This fixes the tests on the platforms that need this workaround, but
unfortunately we don't have a way to make a more platform-agnostic test
right now.
llvm-svn: 295345
With this patch, the only dependency left is from Utility
to Host. After this is broken, Utility will finally be
standalone.
Differential Revision: https://reviews.llvm.org/D29909
llvm-svn: 295088
and use it in the appropriate log statements.
Formatting of chrono types in log messages was very clunky. This should
make it much nicer to use and give better output. For details of the
formatting options see the chrono formatter in llvm.
llvm-svn: 294738
Summary:
This converts LLDB's logging to use llvm streams instead of
lldb_private::Stream and friends. The changes are mostly
straight-forward and amount to s/lldb_private::Stream/llvm::raw_ostream.
The part worth calling out is the rewrite of the StreamCallback class.
Previously this class contained a per-thread buffer of data written. I
assume this had something to do with it trying to make sure each log
line is delivered as a single event, instead of multiple (possibly
interleaved) events. However, this is no longer relevant as the Log
class already writes things to a temporary buffer and then delivers the
message as a single "write", so I have just removed the code in
question.
Reviewers: zturner, clayborg
Subscribers: emaste, lldb-commits, mgorny
Differential Revision: https://reviews.llvm.org/D29615
llvm-svn: 294736
Summary:
This patch removes the over-specified dependencies from LLDBDependencies and instead relies on the dependencies as expressed in each library and tool.
This also removes the library looping in favor of allowing CMake to do its thing. I've tested this patch on Darwin, and found no issues, but since linker semantics vary by system I'll also work on testing it on other platforms too.
Help testing would be greatly appreciated.
Reviewers: labath, zturner
Subscribers: danalbert, srhines, mgorny, jgosnell, lldb-commits
Differential Revision: https://reviews.llvm.org/D29352
llvm-svn: 294515
Summary:
The std::call_once implementation in libstdc++ has problems on few systems: NetBSD, OpenBSD and Linux PPC. LLVM ships with a homegrown implementation llvm::call_once to help on these platforms.
This change is required in the NetBSD LLDB port. std::call_once with libstdc++ results with crashing the debugger.
Sponsored by <The NetBSD Foundation>
Reviewers: labath, joerg, emaste, mehdi_amini, clayborg
Reviewed By: labath, clayborg
Subscribers: #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D29288
llvm-svn: 294202
This moves the following classes from Core -> Utility.
ConstString
Error
RegularExpression
Stream
StreamString
The goal here is to get lldbUtility into a state where it has
no dependendencies except on itself and LLVM, so it can be the
starting point at which to start untangling LLDB's dependencies.
These are all low level and very widely used classes, and
previously lldbUtility had dependencies up to lldbCore in order
to use these classes. So moving then down to lldbUtility makes
sense from both the short term and long term perspective in
solving this problem.
Differential Revision: https://reviews.llvm.org/D29427
llvm-svn: 293941
