The constant is now at source operand 1 (previously at 2).
This is also how it is in legacy AMD sp3 assembler.
Update tests.
Differential Revision: http://reviews.llvm.org/D17984
llvm-svn: 263212
Summary:
This is necessary for when we run out of VGPRs and can no
longer use v_{read,write}_lane for spilling SGPRs.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17592
llvm-svn: 262732
Summary:
This patch impleemnts DS_PERMUTE/DS_BPERMUTE instruction definitions and intrinsics,
which are new since VI.
Reviewers: tstellarAMD, arsenm
Subscribers: llvm-commits, arsenm
Differential Revision: http://reviews.llvm.org/D17614
llvm-svn: 262356
Summary:
Instead of trying to replace SMRD instructions with a VGPR base pointer
with an equivalent MUBUF instruction, we now copy the base pointer to
SGPRs using v_readfirstlane.
This is safe to do, because any load selected as an SMRD instruction
has been proven to have a uniform base pointer, so each thread in the
wave will have the same pointer value in VGPRs.
This will fix some errors on VI from trying to replace SMRD instructions
with addr64-enabled MUBUF instructions that don't exist.
Reviewers: arsenm, cfang, nhaehnle
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17305
llvm-svn: 261385
Summary: This change renames output operand for VOP instructions from dst to vdst. This is needed to enable decoding named operands for disassembler.
Reviewers: vpykhtin, tstellarAMD, arsenm
Subscribers: arsenm, llvm-commits, nhaustov
Projects: #llvm-amdgpu-spb
Differential Revision: http://reviews.llvm.org/D16920
llvm-svn: 260986
Introduce a subtarget feature for this, and leave the default with
the current behavior which assumes up to 16-byte loads/stores can
be used. The field also seems to have the ability to be set to 2 bytes,
but I'm not sure what that would be used for.
llvm-svn: 260651
Summary:
It's possible to have resource descriptors and samplers stored in
VGPRs, either by a VMEM instruction or in the case of samplers,
floating-point calculations. When this happens, we need to use
v_readfirstlane to copy these values back to sgprs.
Reviewers: mareko, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17102
llvm-svn: 260599
Summary:
When we split SMRD instructions into two MUBUFs we were adding the users
of the newly created MUBUFs to the VALU worklist. However, the only
users these instructions had was the REG_SEQUENCE that was inserted
by splitSMRD when the original SMRD instruction was split.
We need to make sure to add the users of the original SMRD to the VALU
worklist before it is split.
I have a test case, but it requires one other bug fix, so it will be
added in a later commt.
Reviewers: mareko, arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D17101
llvm-svn: 260588
If the two operands to an instruction were both
subregisters of the same super register, it would incorrectly
think this counted as the same constant bus use.
This fixes the verifier error in fmin_legacy.ll which
was missing -verify-machineinstrs.
llvm-svn: 260495
Summary:
Also delete all the stub functions that are identical to the
implementations in TargetInstrInfo.cpp.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D16609
llvm-svn: 259054
Summary:
It is off by default, but can be used
with --misched=si
Patch by: Axel Davy
Reviewers: arsenm, tstellarAMD, nhaehnle
Subscribers: nhaehnle, solenskiner, arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D11885
llvm-svn: 257609
Summary:
Multi-dword constant loads generated unnecessary moves from SGPRs into VGPRs,
increasing the code size and VGPR pressure. These moves are now folded away.
Note that this lack of operand folding was not a problem for VMEM loads,
because COPY nodes from VReg_Nnn to VGPR32 are eliminated by the register
coalescer.
Some tests are updated, note that the fsub.ll test explicitly checks that
the move is elided.
With the IR generated by current Mesa, the changes are obviously relatively
minor:
7063 shaders in 3531 tests
Totals:
SGPRS: 351872 -> 352560 (0.20 %)
VGPRS: 199984 -> 200732 (0.37 %)
Code Size: 9876968 -> 9881112 (0.04 %) bytes
LDS: 91 -> 91 (0.00 %) blocks
Scratch: 1779712 -> 1767424 (-0.69 %) bytes per wave
Wait states: 295164 -> 295337 (0.06 %)
Totals from affected shaders:
SGPRS: 65784 -> 66472 (1.05 %)
VGPRS: 38064 -> 38812 (1.97 %)
Code Size: 1993828 -> 1997972 (0.21 %) bytes
LDS: 42 -> 42 (0.00 %) blocks
Scratch: 795648 -> 783360 (-1.54 %) bytes per wave
Wait states: 54026 -> 54199 (0.32 %)
Reviewers: tstellarAMD, arsenm, mareko
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15875
llvm-svn: 257074
Summary:
When copying aggregate registers within the same register class, there may
be an overlap between source and destination that forces us to do the copy
backwards.
Do the simplest possible thing that guarantees the correct order of moves
when there are overlaps, and does whatever when there is no overlap. (The
last part forces some trivial adjustments to test cases.)
Together with r255906, this fixes a VM fault in Unreal Elemental Demo.
While at it, change the generation of kill and def flags to something that
looks more reasonable. This method is used very late during compilation, so
it probably doesn't matter in practice, and to be honest, I don't know if
this change is actually correct because the semantics in connection with
aggregate registers vs. sub-registers are not clear to me.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=93264
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15622
llvm-svn: 256072
Summary:
The method insertNOPs expected the number of wait states to be passed as
parameter, while eliminateFrameIndex passed the immediate argument for the
S_NOP, leading to an off-by-one error. Rename the method to make the
meaning of its parameter clearer. The number of 4 / 5 wait states (which
is what the method has always _tried_ to do according to the comment) is
correct according to the hardware docs.
I stumbled upon this while trying to track down the cause of
https://bugs.freedesktop.org/show_bug.cgi?id=93264. While clearly needed,
this patch unfortunately does not fix that bug...
Reviewers: arsenm, tstellarAMD
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15542
llvm-svn: 255906
Summary:
This allows us to remove the END_OF_TEXT_LABEL hack we had been using
and simplifies the fixups used to compute the address of constant
arrays.
Reviewers: arsenm
Subscribers: arsenm, llvm-commits
Differential Revision: http://reviews.llvm.org/D15257
llvm-svn: 255204
Don't use commuteInstruction, and don't commute if
doing so will not improve legality. Skip the more
complex checks for literal operands and constant bus restrictions,
which are not a concern for VOP2 instructions because src1
does not accept SGPRs or constants and few implicitly
read vcc.
This gets called quite a few times and the
attempts at commuting are a significant fraction
of the time spent in SIFixSGPRCopies, so it's
somewhat worthwhile to optimize. With this patch and others
leading up to it, this reduces the compile time of SIFixSGPRCopies
on some of the LuxMark 2 kernels from ~8ms to ~5ms on my system.
llvm-svn: 254452
If we know we have stack objects, we reserve the registers
that the private buffer resource and wave offset are passed
and use them directly.
If not, reserve the last 5 SGPRs just in case we need to spill.
After register allocation, try to pick the next available registers
instead of the last SGPRs, and then insert copies from the inputs
to the reserved registers in the progloue.
This also only selectively enables all of the input registers
which are really required instead of always enabling them.
llvm-svn: 254331
It does not work because of emergency stack slots.
This pass was supposed to eliminate dummy registers for the
spill instructions, but the register scavenger can introduce
more during PrologEpilogInserter, so some would end up
left behind if they were needed.
The potential for spilling the scratch resource descriptor
and offset register makes doing something like this
overly complicated. Reserve registers to use for the resource
descriptor and use them directly in eliminateFrameIndex.
Also removes creating another scratch resource descriptor
when directly selecting scratch MUBUF instructions.
The choice of which registers are reserved is temporary.
For now it attempts to pick the next available registers
after the user and system SGPRs.
llvm-svn: 254329
v2: added more tests, moved the SALU->VALU conversion to a separate function
It looks like it's not possible to get subregisters in the S_ABS lowering
code, and I don't feel like guessing without testing what the correct code
would look like.
llvm-svn: 254095
The operand layout is slightly different for the atomic
opcodes from the usual MUBUF loads and stores.
This should only fix it on SI/CI. VI is still broken
because it still emits the addr64 replacement.
llvm-svn: 252140
This was checking for a variety of situations that should
never happen. This saves a tiny bit of compile time.
We should not be selecting instructions with invalid operands in the
first place. Most of the time for registers copys are inserted
to the correct operand register class.
For VOP3, since all operand types are supported and literal
constants never are, we just need to verify the constant bus
requirements (all immediates should be legal inline ones).
The only possibly tricky case to maybe worry about is if when
legalizing operands in moveToVALU with s_add_i32 and similar
instructions. If the original s_add_i32 had a literal constant
and we need to replace it with v_add_i32_e64 we would have an
unsupported literal operand. However, I don't think we should worry
about that because SIFoldOperands should handle folding literal
constant operands into the SALU instructions based on the uses.
At SIFoldOperands time, the legality and profitability of
operand types is a bit different.
llvm-svn: 250951
This stops using an unknown reg class operand.
Currently build_vector selection has a broken looking check
where it tries to use a VGPR reg class and an SGPR one if it
sees an SGPR use.
With the source operand has an explicit VGPR class,
illegal copies will be inserted that SIFixSGPRCopies will take care
of normally later, which will allow removing the weird check
of build_vector users. Without this, when removed v_movrels_b32 would
still be emitted even though all of the values were only stored in
SGPRs.
llvm-svn: 249494
to prevent setting a huge stride, because DATA_FORMAT has a different
meaning if ADD_TID_ENABLE is set.
This is a candidate for stable llvm 3.7.
Tested-and-Reviewed-by: Christian König <christian.koenig@amd.com>
llvm-svn: 248858
The splitting of > 4 dword SMRD instructions
if using an offset in an SGPR instead of an immediate
was not setting the destination register,
resulting an an instruction missing an operand
which would assert later.
Test will be included in a following commit
which fixes a related issue.
llvm-svn: 248739
It's easier to understand creating a full instruction
than the current situation where sometimes a new
instruction is created and sometimes it is awkwardly
mutated in place.
llvm-svn: 248627
When buffer resource descriptors were built, the upper two components
of the descriptor were first composed into a 64-bit register because
legalizeOperands assumed all operands had the same register class.
Fix that problem, but keep the workaround. I'm not sure anything
actually is actually emitting such a REG_SEQUENCE now.
If multiple resource descriptors are set up with different base
pointers, this is copied with a single s_mov_b64. We probably
should fix this better by recognizing a pair of s_mov_b32 later,
but for now delete the dead code.
llvm-svn: 248585
