This patch pushes the error handling boundary for the GetBitSize()
methods from Runtime into the Type and CompilerType APIs. This makes it
easier to diagnose problems thanks to more meaningful error messages
being available. GetBitSize() is often the first thing LLDB asks about a
type, so this method is particularly important for a better user
experience.
rdar://145667239
The llvm versions of these functions do that, so we must to so as well.
Practically this meant that were were unable to correctly un-simplify
the names of some types when using type units, which resulted in type
lookup errors.
PR #86603 broke unwinding in for unwind info added via "target symbols
add". #86770 attempted to fix this, but the fix was only partial -- it
accepted new sources of unwind information, but didn't take into account
that the symbol file can alter what lldb percieves as function
boundaries.
A stripped file will not contain information about private
(non-exported) symbols, which will make the public symbols appear very
large. If lldb tries to unwind from such a function before symbols are
added, then the cached unwind plan will prevent new (correct) unwind
plans from being created.
target-symbols-add-unwind.test might have caught this, were it not for
the fact that the "image show-unwind" command does *not* use cached
unwind information (it recomputes it from scratch).
The changes in this patch come in three pieces:
- Clear cached unwind plans when adding symbols. Since the symbol
boundaries can change, we cannot trust anything we've computed
previously.
- Add a flag to "image show-unwind" to display the cached unwind
information (mainly for the use in the test, but I think it's also
generally useful).
- Rewrite the test to better and more reliably simulate the real-world
scenario: I've swapped the running process for a core (minidump) file so
it can run anywhere; used the caching version of the show-unwind
command; and swapped C for assembly to better control the placement of
symbols
The original code resulted in a misfire in the symtab vs. debug info
deduplication code, which caused us to return the same function twice
when searching via a regex (for functions whose entry point is also not
the lowest address).
This is XFAILed for now until we find a good way to locate the
DW_AT_object_pointer of function declarations (a possible solution being
https://github.com/llvm/llvm-project/pull/124790).
Made it a shell test because I couldn't find any SBAPIs that i could
query to find the CV-qualifiers/etc. of member functions.
This is the behavior expected by DWARF. It also requires some fixups to
algorithms which were storing the addresses of some objects (Blocks and
Variables) relative to the beginning of the function.
There are plenty of things that still don't work in this setups, but
this change is sufficient for the expression evaluator to correctly
recognize the entry point of a function in this case.
In Objective-C, forward declarations are currently represented as:
```
DW_TAG_structure_type
DW_AT_name ("Foo")
DW_AT_declaration (true)
DW_AT_APPLE_runtime_class (DW_LANG_ObjC)
```
However, when compiling with `-gmodules`, when a class definition is
turned into a forward declaration within a `DW_TAG_module`, the DIE for
the forward declaration looks as follows:
```
DW_TAG_structure_type
DW_AT_name ("Foo")
DW_AT_declaration (true)
```
Note the absence of `DW_AT_APPLE_runtime_class`. With recent changes in
LLDB, not being able to differentiate between C++ and Objective-C
forward declarations has become problematic (see attached test-case and
explanation in https://github.com/llvm/llvm-project/pull/119860).
The ManualDWARFIndex class can create a index cache if the LLDB index
cache is enabled. This used to save the index to the same file,
regardless of wether the cache was a full index (no .debug_names) or a
partial index (have .debug_names, but not all .o files were had
.debug_names). So we could end up saving an index cache that was
partial, and then later load that partial index as if it were a full
index if the user set the 'settings set
plugin.symbol-file.dwarf.ignore-file-indexes true'. This would cause us
to ignore the .debug_names section, and if the index cache was enabled,
we could end up loading the partial index as if it were a full DWARF
index.
This patch detects when the ManualDWARFIndex is being used with
.debug_names, and saves out a cache file with a suffix of "-full" or
"-partial" to avoid this issue.
.. in the global namespace
The problem was the interaction of #116989 with an optimization in
GetTypesWithQuery. The optimization was only correct for non-exact
matches, but that didn't matter before this PR due to the "second layer
of defense". After that was removed, the query started returning more
types than it should.
This reverts commit 2526d5b168, reapplying
ba14dac481 after fixing the conflict with
#117532. The change is that Function::GetAddressRanges now recomputes
the returned value instead of returning the member. This means it now
returns a value instead of a reference type.
This is a follow-up/reimplementation of #115730. While working on that
patch, I did not realize that the correct (discontinuous) set of ranges
is already stored in the block representing the whole function. The
catch -- ranges for this block are only set later, when parsing all of
the blocks of the function.
This patch changes that by populating the function block ranges eagerly
-- from within the Function constructor. This also necessitates a
corresponding change in all of the symbol files -- so that they stop
populating the ranges of that block. This allows us to avoid some
unnecessary work (not parsing the function DW_AT_ranges twice) and also
results in some simplification of the parsing code.
Making a breakpoint on a line causes an error on aarch64-pc-windows.
This patch changes the test so that a breakpoint can be made on a
function name.
#117168
The problem here is the assumption that the entire function will be
placed in a single section. This will ~never be the case for a
discontinuous function, as the point of splitting the function is to let
the linker group parts of the function according to their "hotness".
The fix is to change the offset computation to use file addresses
instead.
When parsing an optimized value and reading a piece from a file address,
LLDB tries to read the data from memory using that address.
This patch converts file address to load address before reading the
memory.
Fixes#111313Fixes#97484
This is the second half of
https://github.com/llvm/llvm-project/pull/90008.
Essentially, it replaces the work of resolving template types when we
just need the qualified names with walking the DIE tree using
`DWARFTypePrinter`.
### Result
For an internal target, the time spent on `expr *this` for the first
time reduced from 28 secs to 17 secs.
Following up from https://github.com/llvm/llvm-project/pull/112928, we
can reuse the approach from Clang Sema to infer the MSInheritanceModel
and add the necessary attribute manually. This allows the inspection of
member function pointers with DWARF on Windows.
The class is only used from one place, which is trivial to implement
using the llvm class.
The main difference is that in the new implementation, the ranges are
parsed each time anew (instead of being parsed at startup and cached). I
believe this is fine because:
- this is already how things work with DWARF v5 debug_rnglists
- parsing debug_ranges is fairly fast (definitely faster than rnglists)
- generally, this result will be cached at a higher level anyway.
Browsing the code I did find one instance where that is not the case --
SymbolFileDWARF::ResolveFunctionAndBlock -- which is called each time we
resolve an address (to the block level). However, this function is
already pretty suboptimal: it first traverses the DIE tree (which
involves parsing all the DIE attributes) to find the correct block, then
it parses them again to construct the `lldb_private::Block`
representation, and *then* it uses the ID of the block DIE it found in
the first step to look up the `Block` object. If this turns out to be a
bottleneck, I think there are better ways to optimize it than caching
the debug_ranges parse.
The motiviation for this is that DWARFDebugRanges sorts the block
ranges, even though the order of the ranges is load-bearing (in the
absence of DW_AT_low_pc, the "base address" of a scope is determined by
the first range entry). Delaying the parsing (and sorting) step makes it
easier to access the first entry.
This is a follow-up for the conversation here
https://github.com/llvm/llvm-project/pull/115722/.
This test is designed for Windows target/PDB format, so it shouldn't be
built and run for DWARF/etc.
This test fails on
https://lab.llvm.org/staging/#/builders/197/builds/76/steps/18/logs/FAIL__lldb-shell__inline_sites_live_cpp
because of a little difference in the lldb output.
```
# .---command stderr------------
# | C:\buildbot\as-builder-10\lldb-x-aarch64\llvm-project\lldb\test\Shell\SymbolFile\NativePDB\inline_sites_live.cpp:25:11: error: CHECK: expected string not found in input
# | // CHECK: * thread #1, stop reason = breakpoint 1
# | ^
# | <stdin>:1:1: note: scanning from here
# | (lldb) platform select remote-linux
# | ^
# | <stdin>:28:27: note: possible intended match here
# | * thread #1, name = 'inline_sites_li', stop reason = breakpoint 1.3
# | ^
# |
```
Since the remote Shell test execution feature was added, these tests
should now be disabled on Windows target instead of Windows host.
It should fix failures on
https://lab.llvm.org/staging/#/builders/197/builds/76.
This is the beginning of a different, more fundamental approach to
handling. This PR tries to tries to minimize functional changes. It only
makes sure that we store the true set of ranges inside the function
object, so that subsequent patches can make use of it.
This FORM already has support within LLDB to be parsed as a 16-byte
BLOCK, and all that is left to properly support it in the DWARFParser is
to add it to some enums.
With this, I can debug programs that use libstdc++.so.6.0.33 built with
GCC.
This doesn't parse S_CONSTANT case yet, because I found that the global
variable `std::strong_ordering::equal` is a S_CONSTANT and has type of
LF_STRUCTURE which is not currently handled when creating dwarf
expression for the variable. Left a TODO for it to finish later.
This makes `lldb/test/Shell/SymbolFile/PDB/ast-restore.test` and
`lldb/test/Shell/SymbolFile/PDB/calling-conventions-x86.test` pass on
windows with native pdb plugin only.
Remove lldb-repro which was used to run the test suite against a
reproducer. The corresponding functionality has been removed from LLDB
so there's no need for the tool anymore.
Swift types have mangled type names. This adds functionality to look up
those types through the FindTypes API by searching for the mangled type
name instead of the regular name.
Member pointers refer to data or function members of a `CXXRecordDecl`,
which require a `MSInheritanceAttr` in order to be complete. Without that
we cannot calculate the size of a member pointer in memory. The attempt
has been causing a crash further down in the clang AST context. In order
to implement the feature, DWARF will need a new attribtue to convey the
information. For the moment, this patch teaches LLDB to handle to
situation and avoid the crash.
Member pointers refer to data or function members of a `CXXRecordDecl` and
require a `MSInheritanceAttr` in order to be complete. Without that we
cannot calculate their size in memory. The attempt has been causing a crash
further down in the clang AST context. In order to implement the feature,
DWARF will need a new attribtue to convey the information. For the moment,
this patch teaches LLDB to handle to situation and avoid the crash.
I've been getting complaints from users being spammed by -gmodules
missing file warnings going out of control because each object file
depends on an entire DAG of PCM files that usually are all missing at
once. To reduce this problem, this patch does two things:
1. Module now maintains a DenseMap<hash, once> that is used to display
each warning only once, based on its actual text.
2. The PCM warning itself is reworded to include less details, such as
the DIE offset, which is only useful to LLDB developers, who can get
this from the dwarf log if they need it. Because the detail is omitted
the hashing from (1) deduplicates the warnings.
rdar://138144624
Line ending policies were changed in the parent, dccebddb3b. To make
it easier to resolve downstream merge conflicts after line-ending
policies are adjusted this is a separate whitespace-only commit. If you
have merge conflicts as a result, you can simply `git add --renormalize
-u && git merge --continue` or `git add --renormalize -u && git rebase
--continue` - depending on your workflow.
Follow up to https://github.com/llvm/llvm-project/pull/111902.
Makes sure all the `no_unique_address` tests are in the same place and
we don't rely on the host target triple (which means we don't need to
account for `[[msvc::no_unique_address]]` on Windows).
Now that we don't compile with the host compiler, this patch also adds
`-c` to the compilation command since we don't actually need the linked
binary in the test anyway (and on Darwin linking through Clang requires
the `xcrun` prefix to set up the SDK paths, etc.). We already do this in
`no_unique_address-with-bitfields.cpp` anyway.
Fixed the error `unable to create target: 'No available targets are
compatible with triple "x86_64-apple-macosx10.4.0"'` running `clang
--target=x86_64-apple-macosx -c -gdwarf -o %t %s`.
LLDB code for using the type layout data from DWARF was not kicking in
for types which were initially parsed from a declaration. The problem
was in these lines of code:
```
if (type)
layout_info.bit_size = type->GetByteSize(nullptr).value_or(0) * 8;
```
which determine the types layout size by getting the size from the
lldb_private::Type object. The problem is that if the type object does
not have this information cached, this request can trigger another
(recursive) request to lay out/complete the type. This one, somewhat
surprisingly, succeeds, but does that without the type layout
information (because it hasn't been computed yet). The reasons why this
hasn't been noticed so far are:
- this is a relatively new bug. I haven't checked but I suspect it was
introduced in the "delay type definition search" patchset from this
summer -- if we search for the definition eagerly, we will always have a
cached size value.
- it requires the presence of another bug/issue, as otherwise the
automatically computed layout will match the real thing.
- it reproduces (much) more easily with -flimit-debug-info (though it is
possible to trigger it without that flag).
My fix consists of always fetching type size information from DWARF
(which so far existed as a fallback path). I'm not quite sure why this
code was there in the first place (the code goes back to before the
Great LLDB Reformat), but I don't believe it is necessary, as the type
size (for types parsed from definition DIEs) is set exactly from this
attribute (in ParseStructureLikeDIE).
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
