We need the information in the `DeclareOp` to generate debug information
for variables. Currently, cg-rewrite removes the `DeclareOp`. As
`AddDebugInfo` runs after that, it cannot process the `DeclareOp`. My
initial plan was to make the `AddDebugInfo` pass run before the cg-rewrite
but that has few issues.
1. Initially I was thinking to use the memref op to carry the variable
attr. But as @tblah suggested in the #86939, it makes more sense to
carry that information on `DeclareOp`. It also makes it easy to handle
it in codegen and there is no special handling needed for arguments. For
this reason, we need to preserve the `DeclareOp` till the codegen.
2. Running earlier, we will miss the changes in passes that run between
cg-rewrite and codegen.
But not removing the DeclareOp in cg-rewrite has the issue that ShapeOp
remains and it causes errors during codegen. To solve this problem, I
convert DeclareOp to XDeclareOp in cg-rewrite instead of removing
it. This was mentioned as possible solution by @jeanPerier in
https://reviews.llvm.org/D136254
The conversion follows similar logic as used for other operators in that
file. The FortranAttr and CudaAttr are currently not converted but left
as TODO when the need arise.
Now `AddDebugInfo` pass can extracts information about local variables
from `XDeclareOp` and creates `DILocalVariableAttr`. These are attached
to `XDeclareOp` using `FusedLoc` approach. Codegen can use them to
create `DbgDeclareOp`. I have added tests that checks the debug
information in mlir from and also in llvm ir.
Currently we only handle very limited types. Rest are given a place
holder type. The previous placeholder type was basic type with
`DW_ATE_address` encoding. When variables are added, it started
causing assertions in the llvm debug info generation logic for some
types. It has been changed to an interger type to prevent these issues
until we handle those types properly.
The HLFIR pass lowering WHERE (hlfir.where op) was too aggressive in its
hoisting of scalar sub-expressions from LHS/RHS/MASKS outside of the
loops generated for the WHERE construct.
This violated F'2023 10.2.3.2 point 10 that stipulated that elemental
operations must be evaluated only for elements corresponding to true
values, because scalar operations are still elemental, and hoisting them
is invalid if they could have side effects (e.g, division by zero) and
if the MASK is always false (i.e., the loop body is never evaluated).
The difficulty is that 10.2.3.2 point 9 mandates that nonelemental
function must be evaluated before the loops. So it is not possible to
simply stop hoisting non hlfir.elemental operations.
Marking calls with an elemental/nonelemental attribute would not allow
the pass to be correct if inlining is run before and drops this
information, beside, extracting the argument tree that may have been
CSE-ed with the rest of the expression evaluation would be a bit
combursome.
Instead, lower nonelemental calls into a new hlfir.exactly_once
operation that will allow retaining the information that the operations
contained inside its region must be hoisted. This allows inlining to
operate before if desired in order to improve alias analysis.
The LowerHLFIROrderedAssignments pass is updated to only hoist the
operations contained inside hlfir.exactly_once bodies.
Some functions and subroutines are available in device context
(device/global). These functions have interfaces declared in the
`cudadevice` module.
This patch adds interfaces as `__cuda_device_builtins_<fctname>` in a
builtin module and they are USE'd rename in the `cudadevice` module. The
module is implicitly used in device/global subprograms.
The builtin module only contains procedures from section 3.6.4 for now.
This patch is one in a series of four patches that seeks to refactor
slightly and extend the current record type map support that was
put in place for Fortran's descriptor types to handle explicit
member mapping for record types at a single level of depth.
For example, the below case where two members of a Fortran
derived type are mapped explicitly:
''''
type :: scalar_and_array
real(4) :: real
integer(4) :: array(10)
integer(4) :: int
end type scalar_and_array
type(scalar_and_array) :: scalar_arr
!$omp target map(tofrom: scalar_arr%int, scalar_arr%real)
''''
Current cases of derived type mapping left for future work are:
> explicit member mapping of nested members (e.g. two layers of
record types where we explicitly map a member from the internal
record type)
> Fortran's automagical mapping of all elements and nested elements
of a derived type
> explicit member mapping of a derived type and then constituient members
(redundant in Fortran due to former case but still legal as far as I am aware)
> explicit member mapping of a record type (may be handled reasonably, just
not fully tested in this iteration)
> explicit member mapping for Fortran allocatable types (a variation of nested
record types)
This patch seeks to support this by extending the Flang-new OpenMP lowering to
support generation of this newly required information, creating the neccessary
parent <-to-> member map_info links, calculating the member indices and
setting if it's a partial map.
The OMPDescriptorMapInfoGen pass has also been generalized into a map
finalization phase, now named OMPMapInfoFinalization. This pass was extended
to support the insertion of member maps into the BlockArg and MapOperands of
relevant map carrying operations. Similar to the method in which descriptor types
are expanded and constituient members inserted.
Pull Request: https://github.com/llvm/llvm-project/pull/82853
A derived type that meets (most of) the requirements of an interoperable
type but doesn't actually have the BIND(C) attribute can be accepted as
an interoperable type, with optional warnings.
The lowering produces fir.dummy_scope operation if the current
function has dummy arguments. Each hlfir.declare generated
for a dummy argument is then using the result of fir.dummy_scope
as its dummy_scope operand. This is only done for HLFIR.
I was not able to find a reliable way to identify dummy symbols
in `genDeclareSymbol`, so I added a set of registered dummy symbols
that is alive during the variables instantiation for the current
function. The set is initialized during the mapping of the dummy
argument symbols to their MLIR values. It is reset right after
all variables are instantiated - this is done to avoid generating
hlfir.declare operations with dummy_scope for the clones of
the dummy symbols (e.g. this happens with OpenMP privatization).
If this can be done in a cleaner way, please advise.
Add support for the -w option to switch OFF all Flang
warnings. This patch only supports switching OFF the
frontend warnings.
TODO : Support for MLIR, LLVM and Driver warnings.
TODO : Support interactions between -w, -pedantic, -Wall
Current implementation of default clause privatization incorrectly fails
to privatize in presence of non-OpenMP constructs (i.e. nested
constructs with regions whose symbols need to be privatized in the scope
of the parent OpenMP construct). This patch fixes the same by
considering non-OpenMP constructs separately by collecting symbols of a
nested region if it is a non-OpenMP construct with a region, and
privatizing it in the scope of the parent OpenMP construct.
Fixes https://github.com/llvm/llvm-project/issues/71914 and
https://github.com/llvm/llvm-project/issues/71915
Lower locals allocation of cuda device, managed and unified variables to
fir.cuda_alloc. Add fir.cuda_free in the function context finalization.
@vzakhari For some reason the PR #90526 has been closed when I merged PR
#90525. Just reopening one.
This change inserts a few extension point callbacks in the
DefaultFIROptimizerPassPipeline. As an example usage of callbacks in the
FIR optimizer pipeline, the FIRInlinerCallback is now used to register
the default MLIR inliner pass in flang-new, tco, and bbc compilation
flows. Other compilation flows can use these callbacks to add extra
passes at different points of the pass pipeline.
---------
Co-authored-by: Vijay Kandiah <vkandiah@sky6.pgi.net>
…Warn()
Many warning messages were being emitted unconditionally. Ensure that
all warnings are conditional on a true result from a call to
common::LanguageFeatureControl::ShouldWarn() so that it is easy for a
driver to disable them all, or, in the future, to provide per-warning
control over them.
When there are one or more fatal error messages produced by the parser,
semantic analysis is not performed. But when there are messages produced
by the parser and none of them are fatal, those messages are emitted to
the user before compilation continues with semantic analysis, and any
messages produced by semantics are emitted after the messages from
parsing.
This can be confusing for the user, as the messages may no longer all be
in source file location order. It also makes it difficult to write tests
that check for both non-fatal messages from parsing as well as messages
from semantics using inline CHECK: or other expected messages in test
source code.
This patch ensures that if semantic analysis is performed, and non-fatal
messages were produced by the parser, that all the messages will be
combined and emitted in source file order.
It was pointed out in post commit review of
https://github.com/llvm/llvm-project/pull/90597 that the pass should
never have been run in parallel over all functions (and now other top
level operations) in the first place. The mutex used in the pass was
ineffective at preventing races since each instance of the pass would
have a different mutex.
This patch updates the compatibility checks for CUDA attribute iin
preparation to implement the matching rules described in section 3.2.3.
We this patch the compiler will still emit an error when there is
multiple specific procedures that matches since the matching distances
is not yet implemented. This will be done in a separate patch.
https://docs.nvidia.com/hpc-sdk/archive/24.3/compilers/cuda-fortran-prog-guide/index.html#cfref-var-attr-unified-data
gpu=unified and gpu=managed are not part of this patch since these
options are not recognized by flang yet.
The new operation is just an abstract attribute that is attached to
[hl]fir.declare operations of dummy arguments of a subroutine.
Dummy arguments of the same subroutine refer to the same
fir.dummy_scope, so they can be recognized as such during FIR AliasAnalysis.
Note that the fir.dummy_scope must be specific to the runtime
instantiation of a subroutine, so any MLIR inlining/cloning should duplicate and
unique it vs using the same fir.dummy_scope for different runtime instantiations.
This is why I made it an operation rather than an attribute.
The new operation uses a write effect on DebuggingResource, same as
[hl]fir.declare, to avoid optimizing it away.
A double pointer was being passed to the call to FortranStart rather than just a pointer to the EnvironmentDefaults.list. This now passes `null` directly when there's no EnvironmentDefaults.list and passes the list directly when there is, removing the original global variable which was a pointer to a pointer containing null or the EnvironmentDefaults.list global.
Fixes#90537
We might use polymorphic ops in top-level operations other than
functions some time in the future. We need to ensure that these
operations can be lowered.
See RFC:
https://discourse.llvm.org/t/rfc-add-an-interface-for-top-level-container-operations
Some of the changes are from moving declaration and definition of the
constructor function into tablegen (as requested in code review when
altering another pass).
This patch introduces fir.cuda_alloc/fir.cuda_free. These operations
will be used instead of fir.alloca for local CUDA device, managed and
unified variables.
This patch changes the behaviour for flang to only create and link to a
`main` entry point when the Fortran code has a program statement in it.
This means that flang-new can be used to link even when the program is
a mixed C/Fortran code with `main` present in C and no entry point
present in Fortran.
This also removes the `-fno-fortran-main` flag as this no longer has any
functionality.
…rivate`
Adds support for CFG conversion and conversion to LLVM IR for
`omp.private` ops. This bridges a gap between FIR and LLVM to provide
more support for lowering `omp.private` ops for things like
allocatables.
…ted. (#89998)" (#90250)
This partially reverts commit 7aedd7dc75.
This change removes calls to the deprecated member functions. It does
not mark the functions deprecated yet and does not disable the
deprecation warning in TypeSwitch. This seems to cause problems with
MSVC.
This is another one that runs on functions but isn't appropriate to also
run on other top level operations. It needs to find all paths that
return from the function to free heap allocated memory. There isn't a
generic concept for general top level operations which is equivalent to
looking for function returns.
I removed the manual definition of the options structure because there
is already an identical definition in tablegen and the options are
documented in Passes.td.
Stack arrays needs to stay running only on func.func because it needs to
know which block terminators can end the function (rather than just
branch between unstructured control flow). A similar concept does not
exist at the more abstract level of "any top level mlir operation".
For example, it currently looks for func::ReturnOp and
fir::UnreachableOp as points when execution can end. If this were to be
run on omp.declare_reduction, it would also need to understand
omp.YieldOp (perhaps only when omp.declare_reduction is the parent).
There isn't a generic concept in MLIR for this.
The pass is currently defined as only considering function arguments as
candidates for the optimization. I would prefer to generalise the pass
for other top level operations only when there is a concrete use case
before making too many assumptions about the current set of top level
operations. Therefore I have not adapted this pass to run on all top
level operations.
/home/david.spickett/llvm-project/flang/include/flang/Runtime/descriptor.h:458:30: warning: variable 'addendum' set but not used [-Wunused-but-set-variable]
458 | if (DescriptorAddendum * addendum{descriptor().Addendum()}) {
|
The if body is purely asserts.
When prescanning a Fortran source file with preprocessing enabled in
free source form, interpret a line-ending backslash as a source line
continuation marker as a C preprocessor would. This usage isn't
completely portable, but it is supported by GNU Fortran and appears in
the source for FPM package manager.
…grams
The parser only recognizes compiler directives that appear within
internal / module subprograms, not those that might appear between them.
Extend to allow them between subprograms as well.
Add code to the runtime support library for the SELECTED_CHAR_KIND and
SELECTED_LOGICAL_KIND intrinsic functions. These are usually used with
constant folding in constant expressions, but the are available for use
with dynamic arguments as well.
Lowering support remains to be implemented.
Automatic deallocation of allocatable that are cuda device variable must
use the fir.cuda_deallocate operation. This patch update the automatic
deallocation code generation to use this operation when the variable is
a cuda variable.
This patch has also the side effect to correctly call
`attachDeclarePostDeallocAction` for OpenACC declare variable on
automatic deallocation as well. Update the code in
`attachDeclarePostDeallocAction` so we do not attach on fir.result but
on the correct last op.
Semantics usually fold SHAPE into an array constructor, but sometimes it
cannot (like when the source is a function result that cannot be
duplicated in expression analysis). Add lowering handling for shape.
