This patch adds the functionality to compare BFI counts with real
profile
counts right after reading the profile. It will print remarks under
-Rpass-analysis=pgo, or the internal option -pass-remarks-analysis=pgo.
Differential Revision: https://reviews.llvm.org/D91813
As noted in D93229, the transform from scalar load to vector load
potentially leaks poison from the extra vector elements that are
being loaded.
We could use freeze here (and x86 codegen at least appears to be
the same either way), but we already have a shuffle in this logic
to optionally change the vector size, so let's allow that
instruction to serve both purposes.
Differential Revision: https://reviews.llvm.org/D93238
This adds support for loops like
unsigned clz(unsigned x) {
unsigned w = sizeof (x) * CHAR_BIT;
while (x) {
w--;
x >>= 1;
}
return w;
}
and
unsigned clz(unsigned x) {
unsigned w = sizeof (x) * CHAR_BIT - 1;
while (x >>= 1) {
w--;
}
return w;
}
To support these we look for add x, -1 as well as add x, 1 that
we already matched. If the value was -1 we need to subtract from
the initial counter value instead of adding to it.
Fixes PR48404.
Differential Revision: https://reviews.llvm.org/D92745
Even though d38205144f was mostly a correct
fix for the external non-PHI users, it's not a *generally* correct fix,
because the 'placeholder' values in those trivial PHI's we create
shouldn't be *always* 'undef', but the PHI itself for the backedges,
else we end up with wrong value, as the `@pr48450_2` test shows.
But we can't just do that, because we can't check that the PHI
can be it's own incoming value when coming from certain predecessor,
because we don't have a dominator tree.
So until we can address this correctness problem properly,
ensure that we don't perform the transformation
if there are such problematic external uses.
Making dominator tree available there is going to be involved,
since `-simplifycfg` pass currently does not preserve/update domtree...
D82227 has added a proper check to limit PHI vectorization to the
maximum vector register size. That unfortunately resulted in at
least a couple of regressions on SystemZ and x86.
This change reverts PHI handling from D82227 and replaces it with
a more general check in SLPVectorizerPass::tryToVectorizeList().
Moved to tryToVectorizeList() it allows to restart vectorization
if initial chunk fails.
However, this function is more general and handles not only PHI
but everything which SLP handles. If vectorization factor would
be limited to maximum vector register size it would limit much
more vectorization than before leading to further regressions.
Therefore a new TTI callback getMaximumVF() is added with the
default 0 to preserve current behavior and limit nothing. Then
targets can decide what is better for them.
The callback gets ElementSize just like a similar getMinimumVF()
function and the main opcode of the chain. The latter is to avoid
regressions at least on the AMDGPU. We can have loads and stores
up to 128 bit wide, and <2 x 16> bit vector math on some
subtargets, where the rest shall not be vectorized. I.e. we need
to differentiate based on the element size and operation itself.
Differential Revision: https://reviews.llvm.org/D92059
Use SCEV to salvage additional @llvm.dbg.value that have turned into
referencing undef after transformation (and traditional
salvageDebugInfo). Before rewrite (but after introduction of new
induction variables) use SCEV to compute an equivalent set of values for
each @llvm.dbg.value in the loop body (among the loop header PHI-nodes).
After rewrite (and dead PHI elimination) update those @llvm.dbg.value
now referencing undef by picking a remaining value from its equivalence
set. Allow match with offset by inserting compensation code in the
DIExpression.
Fixes : PR38815
Differential Revision: https://reviews.llvm.org/D87494
Vector element size could be different for different store chains.
This patch prevents wrong computation of maximum number of elements
for that case.
Differential Revision: https://reviews.llvm.org/D93192
InstCombine canonicalizes X>C && X<C' style comparisons into
(X+C1)<C2. This type of expression is recognized by some analyses
like LVI, but currently not when used inside assumptions, because
AssumptionCache does not track affected values for it.
In particular, if the successor block, which is about to get a new
predecessor block, currently only has a single predecessor,
then the bonus instructions will be directly used within said successor,
which is fine, since the block with bonus instructions dominates that
successor. But once there's a new predecessor, the IR is no longer valid,
and we don't fix it, because we only update PHI nodes.
Which means, the live-out bonus instructions must be exclusively used
by the PHI nodes in successor blocks. So we have to form trivial PHI nodes.
which will then be successfully updated to recieve cloned bonus instns.
This all works fine, except for the fact that we don't have access to
the dominator tree, and we don't ignore unreachable code,
so we sometimes do end up having to deal with some weird IR.
Fixes https://bugs.llvm.org/show_bug.cgi?id=48450
CVP currently handles switches by checking an equality predicate
on all edges from predecessor blocks. Of course, this can only
work if the value being switched over is defined in a different block.
Replace this implementation with a call to getPredicateAt(), which
also does the predecessor edge predicate check (if not defined in
the same block), but can also do quite a bit more: It can reason
about phi-nodes by checking edge predicates for incoming values,
it can reason about assumes, and it can reason about block values.
As such, this makes the implementation both simpler and more
powerful. The compile-time impact on CTMark is in the noise.
These cover cases handled by getPredicateAt(), but not by the
current implementation:
* Assumes based on context instruction.
* Value from phi node in same block (using per-pred reasoning).
* Value from non-phi node in same block (using block-val reasoning).
When it comes to the scalar cost of any predicated block, the loop
vectorizer by default regards this predication as a sign that it is
looking at an if-conversion and divides the scalar cost of the block by
2, assuming it would only be executed half the time. This however makes
no sense if the predication has been introduced to tail predicate the
loop.
Original patch by Anna Welker
Differential Revision: https://reviews.llvm.org/D86452
This transform was added at:
c63799fc52
From what I see, it's the first demanded elements transform that adds
a new instruction using the IRBuilder. There are similar folds in
the generic demanded bits chunk of instcombine that also use the
InsertPointGuard code pattern.
The tests here would assert/crash because the new instruction was
being added at the start of the demanded elements analysis rather
than at the instruction that is being replaced.
If we have two unknown sizes and one GEP operand and one non-GEP
operand, then we currently simply return MayAlias. The comment says
we can't do anything useful ... but we can! We can still check that
the underlying objects are different (and do so for the GEP-GEP case).
To reduce the compile-time impact, this a) checks this early, before
doing the relatively expensive GEP decomposition that will not be
used and b) doesn't do the check if the other operand is a phi or
select. In that case, the phi/select will already recurse, so this
would just do two slightly different recursive walks that arrive at
the same roots.
Compile-time is still a bit of a mixed bag: https://llvm-compile-time-tracker.com/compare.php?from=624af932a808b363a888139beca49f57313d9a3b&to=845356e14adbe651a553ed11318ddb5e79a24bcd&stat=instructions
On average this is a small improvement, but sqlite with ThinLTO has
a 0.5% regression (lencod has a 1% improvement).
The BasicAA test case checks this by using two memsets with unknown
size. However, the more interesting case where this is useful is
the LoopVectorize test case, as analysis of accesses in loops tends
to always us unknown sizes.
Differential Revision: https://reviews.llvm.org/D92401
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
The test is reduced from the example in D82005.
Similar to 94f6d365e, the test here would assert in
the DomTree when we tried to convert a select to a
phi with an unreachable block operand.
We may want to add some kind of guard code in DomTree
itself to avoid this sort of problem.
This change implements pseudo probe encoding and emission for CSSPGO. Please see RFC here for more context: https://groups.google.com/g/llvm-dev/c/1p1rdYbL93s
Pseudo probes are in the form of intrinsic calls on IR/MIR but they do not turn into any machine instructions. Instead they are emitted into the binary as a piece of data in standalone sections. The probe-specific sections are not needed to be loaded into memory at execution time, thus they do not incur a runtime overhead.
**ELF object emission**
The binary data to emit are organized as two ELF sections, i.e, the `.pseudo_probe_desc` section and the `.pseudo_probe` section. The `.pseudo_probe_desc` section stores a function descriptor for each function and the `.pseudo_probe` section stores the actual probes, each fo which corresponds to an IR basic block or an IR function callsite. A function descriptor is stored as a module-level metadata during the compilation and is serialized into the object file during object emission.
Both the probe descriptors and pseudo probes can be emitted into a separate ELF section per function to leverage the linker for deduplication. A `.pseudo_probe` section shares the same COMDAT group with the function code so that when the function is dead, the probes are dead and disposed too. On the contrary, a `.pseudo_probe_desc` section has its own COMDAT group. This is because even if a function is dead, its probes may be inlined into other functions and its descriptor is still needed by the profile generation tool.
The format of `.pseudo_probe_desc` section looks like:
```
.section .pseudo_probe_desc,"",@progbits
.quad 6309742469962978389 // Func GUID
.quad 4294967295 // Func Hash
.byte 9 // Length of func name
.ascii "_Z5funcAi" // Func name
.quad 7102633082150537521
.quad 138828622701
.byte 12
.ascii "_Z8funcLeafi"
.quad 446061515086924981
.quad 4294967295
.byte 9
.ascii "_Z5funcBi"
.quad -2016976694713209516
.quad 72617220756
.byte 7
.ascii "_Z3fibi"
```
For each `.pseudoprobe` section, the encoded binary data consists of a single function record corresponding to an outlined function (i.e, a function with a code entry in the `.text` section). A function record has the following format :
```
FUNCTION BODY (one for each outlined function present in the text section)
GUID (uint64)
GUID of the function
NPROBES (ULEB128)
Number of probes originating from this function.
NUM_INLINED_FUNCTIONS (ULEB128)
Number of callees inlined into this function, aka number of
first-level inlinees
PROBE RECORDS
A list of NPROBES entries. Each entry contains:
INDEX (ULEB128)
TYPE (uint4)
0 - block probe, 1 - indirect call, 2 - direct call
ATTRIBUTE (uint3)
reserved
ADDRESS_TYPE (uint1)
0 - code address, 1 - address delta
CODE_ADDRESS (uint64 or ULEB128)
code address or address delta, depending on ADDRESS_TYPE
INLINED FUNCTION RECORDS
A list of NUM_INLINED_FUNCTIONS entries describing each of the inlined
callees. Each record contains:
INLINE SITE
GUID of the inlinee (uint64)
ID of the callsite probe (ULEB128)
FUNCTION BODY
A FUNCTION BODY entry describing the inlined function.
```
To support building a context-sensitive profile, probes from inlinees are grouped by their inline contexts. An inline context is logically a call path through which a callee function lands in a caller function. The probe emitter builds an inline tree based on the debug metadata for each outlined function in the form of a trie tree. A tree root is the outlined function. Each tree edge stands for a callsite where inlining happens. Pseudo probes originating from an inlinee function are stored in a tree node and the tree path starting from the root all the way down to the tree node is the inline context of the probes. The emission happens on the whole tree top-down recursively. Probes of a tree node will be emitted altogether with their direct parent edge. Since a pseudo probe corresponds to a real code address, for size savings, the address is encoded as a delta from the previous probe except for the first probe. Variant-sized integer encoding, aka LEB128, is used for address delta and probe index.
**Assembling**
Pseudo probes can be printed as assembly directives alternatively. This allows for good assembly code readability and also provides a view of how optimizations and pseudo probes affect each other, especially helpful for diff time assembly analysis.
A pseudo probe directive has the following operands in order: function GUID, probe index, probe type, probe attributes and inline context. The directive is generated by the compiler and can be parsed by the assembler to form an encoded `.pseudoprobe` section in the object file.
A example assembly looks like:
```
foo2: # @foo2
# %bb.0: # %bb0
pushq %rax
testl %edi, %edi
.pseudoprobe 837061429793323041 1 0 0
je .LBB1_1
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 6 2 0
callq foo
.pseudoprobe 837061429793323041 3 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
.LBB1_1: # %bb1
.pseudoprobe 837061429793323041 5 1 0
callq *%rsi
.pseudoprobe 837061429793323041 2 0 0
.pseudoprobe 837061429793323041 4 0 0
popq %rax
retq
# -- End function
.section .pseudo_probe_desc,"",@progbits
.quad 6699318081062747564
.quad 72617220756
.byte 3
.ascii "foo"
.quad 837061429793323041
.quad 281547593931412
.byte 4
.ascii "foo2"
```
With inlining turned on, the assembly may look different around %bb2 with an inlined probe:
```
# %bb.2: # %bb2
.pseudoprobe 837061429793323041 3 0
.pseudoprobe 6699318081062747564 1 0 @ 837061429793323041:6
.pseudoprobe 837061429793323041 4 0
popq %rax
retq
```
**Disassembling**
We have a disassembling tool (llvm-profgen) that can display disassembly alongside with pseudo probes. So far it only supports ELF executable file.
An example disassembly looks like:
```
00000000002011a0 <foo2>:
2011a0: 50 push rax
2011a1: 85 ff test edi,edi
[Probe]: FUNC: foo2 Index: 1 Type: Block
2011a3: 74 02 je 2011a7 <foo2+0x7>
[Probe]: FUNC: foo2 Index: 3 Type: Block
[Probe]: FUNC: foo2 Index: 4 Type: Block
[Probe]: FUNC: foo Index: 1 Type: Block Inlined: @ foo2:6
2011a5: 58 pop rax
2011a6: c3 ret
[Probe]: FUNC: foo2 Index: 2 Type: Block
2011a7: bf 01 00 00 00 mov edi,0x1
[Probe]: FUNC: foo2 Index: 5 Type: IndirectCall
2011ac: ff d6 call rsi
[Probe]: FUNC: foo2 Index: 4 Type: Block
2011ae: 58 pop rax
2011af: c3 ret
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91878
The NPM runs loop passes over loops in forward program order, rather
than the legacy loop PM's reverse program order. This seems to produce
better results as shown here.
I verified that changing the loop order to reverse program order results
in the same IR with the NPM.
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D92817
Explicitly opt-out llvm/test/Transforms/Attributor.
Verified by flipping the default value of allow-unused-prefixes and
observing that none of the failures were under llvm/test/Transforms.
Differential Revision: https://reviews.llvm.org/D92404
This is an enhancement to load vectorization that is motivated by
a pattern in https://llvm.org/PR16739.
Unfortunately, it's still not enough to make a difference there.
We will have to handle multi-use cases in some better way to avoid
creating multiple overlapping loads.
Differential Revision: https://reviews.llvm.org/D92858
The non-strict variants are already handled because they are canonicalized
to strict variants by swapping hands in both the select and icmp,
and the fold simply considers that strictness is irrelevant here.
But that isn't actually true for the last pattern, as PR48390 reports.
For stores chain vectorization we choose the size of vector
elements to ensure we fit to minimum and maximum vector register
size for the number of elements given. This patch corrects vector
element size choosing the width of value truncated just before
storing instead of the width of value stored.
Fixes PR46983
Differential Revision: https://reviews.llvm.org/D92824
* Steps are scaled by `vscale`, a runtime value.
* Changes to circumvent the cost-model for now (temporary)
so that the cost-model can be implemented separately.
This can vectorize the following loop [1]:
void loop(int N, double *a, double *b) {
#pragma clang loop vectorize_width(4, scalable)
for (int i = 0; i < N; i++) {
a[i] = b[i] + 1.0;
}
}
[1] This source-level example is based on the pragma proposed
separately in D89031. This patch only implements the LLVM part.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D91077
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
MD5 is used.
Currently during sample profile loading, NameTable has to be loaded entirely
up front before any name string is retrieved. That is because NameTable is
stored using ULEB128 encoding and cannot be directly accessed like an array.
However, if MD5 is used to represent name in the NameTable, it has fixed
length. If MD5 names are stored in uint64_t type instead of ULEB128, NameTable
can be accessed like an array then in many cases only part of the NameTable
has to be read. This is helpful for reducing compile time especially when
small source file is compiled. We find that after this change, the elapsed
time to build a large application distributively is reduced by 5% and the
accumulative cpu time used for building is also reduced by 5%. The size of
the profile is slightly reduced with this change by ~0.2%, and that also
indicates encoding MD5 in ULEB128 doesn't save the storage space.
Differential Revision: https://reviews.llvm.org/D92621
phi-empty.ll does not pass under the new PM because the NPM runs
-loop-simplify. Running -loop-simplify ends up not reproing
https://llvm.org/PR48296.
Verified that this test fails when 9eb2c011 is reverted.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D92807
This is a rework of D85812, which didn't land.
When callee coroutine function is inlined into caller coroutine function before coro-split pass, llvm will emits "coroutine should have exactly one defining @llvm.coro.begin". It seems that coro-early pass can not handle this quiet well.
So we believe that unsplited coroutine function should not be inlined.
This patch fix such issue by not inlining function if it has attribute "coroutine.presplit" (it means the function has not been splited) to fix this issue
test plan: check-llvm, check-clang
In D85812, there was suggestions on moving the macros to Attributes.td to avoid circular header dependency issue.
I believe it's not worth doing just to be able to use one constant string in one place.
Today, there are already 3 possible attribute values for "coroutine.presplit": c6543cc6b8/llvm/lib/Transforms/Coroutines/CoroInternal.h (L40-L42)
If we move them into Attributes.td, we would be adding 3 new attributes to EnumAttr, just to support this, which I think is an overkill.
Instead, I think the best way to do this is to add an API in Function class that checks whether this function is a coroutine, by checking the attribute by name directly.
Differential Revision: https://reviews.llvm.org/D92706
This guards against cases where the symbol was dead code eliminated in
the binary by ThinLTO, and we have a sample profile collected for one
binary but used to optimize another.
Most of the benefit from ICP comes from inlining the target, which we
can't do with only a declaration anyway. If this is in the pre-ThinLTO
link step (e.g. for instrumentation based PGO), we will attempt the
promotion again in the ThinLTO backend after importing anyway, and we
don't need the early promotion to facilitate that.
Differential Revision: https://reviews.llvm.org/D92804
Text section prefix is created in CodeGenPrepare, it's file format independent implementation, text section name is written into object file in TargetLoweringObjectFile, it's file format dependent implementation, port code of adding text section prefix to text section name from ELF to COFF.
Different with ELF that use '.' as concatenation character, COFF use '$' as concatenation character. That is, concatenation character is variable, so split concatenation character from text section prefix.
Text section prefix is existing feature of ELF, it can help to reduce icache and itlb misses, it's also make possible aggregate other compilers e.g. v8 created same prefix sections. Furthermore, the recent feature Machine Function Splitter (basic block level text prefix section) is based on text section prefix.
Reviewed By: pengfei, rnk
Differential Revision: https://reviews.llvm.org/D92073
