Allow utility constructs (error and nothing) to appear in the
specification part as well as the execution part. The exception is
"ERROR AT(EXECUTION)" which should only be in the execution part.
In case of ambiguity (the boundary between the specification and the
execution part), utility constructs will be parsed as belonging to the
specification part. In such cases move them to the execution part in the
OpenMP canonicalization code.
The OmpLinearClause class was a variant of two classes, one for when the
linear modifier was present, and one for when it was absent. These two
classes did not follow the conventions for parse tree nodes, (i.e.
tuple/wrapper/union formats), which necessitated specialization of the
parse tree visitor.
The new form of OmpLinearClause is the standard tuple with a list of
modifiers and an object list. The specialization of parse tree visitor
for it has been removed.
Parsing and unparsing of the new form bears additional complexity due to
syntactical differences between OpenMP 5.2 and prior versions: in OpenMP
5.2 the argument list is post-modified, while in the prior versions, the
step modifier was a post-modifier while the linear modifier had an
unusual syntax of `modifier(list)`.
With this change the LINEAR clause is no different from any other
clauses in terms of its structure and use of modifiers. Modifier
validation and all other checks work the same as with other clauses.
Support the atomic compare option of a fail(memory-order) clauses.
Additional tests introduced to check that parsing and semantics checks
for the new clause is handled.
Lowering for atomic compare is still unsupported and wil end in a TOOD
(aka "Not yet implemented"). A test for this case with the fail clause
is also present.
This is a mostly mechanical change from specific modifiers embedded
directly in a clause to the Modifier variant.
Additional comments and references to the OpenMP specs were added.
The intent is to keep names in sync with the terminology from the OpenMP
spec:
```
OmpBindClause::Type -> Binding
OmpDefaultClause::Type -> DataSharingAttribute
OmpDeviceTypeClause::Type -> DeviceTypeDescription
OmpProcBindClause::Type -> AffinityPolicy
```
Add more comments with references to the OpenMP specs.
This adds a minimalistic implementation of parsing and semantics for the
ATOMIC COMPARE feature from OpenMP 5.1.
There is no lowering, just a TODO for that part. Some of the Semantics
is also just a comment explaining that more is needed.
Again, this simplifies the semantic checks and lowering quite a bit.
Update the check for positive alignment to use a more informative
message, and to highlight the modifier itsef, not the whole clause.
Remove the checks for the allocator expression itself being positive:
there is nothing in the spec that says that it should be positive.
Remove the "simple" modifier from the AllocateT template, since both
simple and complex modifiers are the same thing, only differing in
syntax.
This removes the specialized parsers and helper classes for these
clauses, namely ConcatSeparated, MapModifiers, and MotionModifiers. Map
and the motion clauses are now handled in the same way as all other
clauses with modifiers, with one exception: the commas separating their
modifiers are optional. This syntax is deprecated in OpenMP 5.2.
Implement version checks for modifiers: for a given modifier on a given
clause, check if that modifier is allowed on this clause in the
specified OpenMP version. This replaced several individual checks.
Add a testcase for handling map modifiers in a different order, and for
diagnosing an ultimate modifier out of position.
This actually simplifies the AST node for the schedule clause: the two
allowed modifiers can be easily classified as the ordering-modifier and
the chunk-modifier during parsing without the need to create additional
classes.
Also, define helper macros in parse-tree.h.
Apply the new modifier representation to the DEFAULTMAP and REDUCTION
clauses, with testcases utilizing the new modifier validation.
OpenMP modifier overhaul: #3/3
This is the first part of the effort to make parsing of clause modifiers
more uniform and robust. Currently, when multiple modifiers are allowed,
the parser will expect them to appear in a hard-coded order.
Additionally, modifier properties (such as "ultimate") are checked
separately for each case.
The overall plan is
1. Extract all modifiers into their own top-level classes, and then
equip them with sets of common properties that will allow performing the
property checks generically, without refering to the specific kind of
the modifier.
2. Define a parser (as a separate class) for each modifier.
3. For each clause define a union (std::variant) of all allowable
modifiers, and parse the modifiers as a list of these unions.
The intent is also to isolate parts of the code that could eventually be
auto-generated.
OpenMP modifier overhaul: #1/3
This prepares for using the DECLARE MAPPER construct.
A check in lowering will say "Not implemented" when trying to use a
mapper as some code is required to tie the mapper to the declared one.
Senantics check for the symbol generated.
Extract the SINK/SOURCE parse tree elements into a separate class
`OmpDoacross`, share them between DEPEND and DOACROSS clauses. Most of
the changes in Semantics are to accommodate the new contents of
OmpDependClause, and a mere introduction of OmpDoacrossClause.
There are no semantic checks specifically for DOACROSS.
Parse PRESENT modifier as well while we're at it (no MAPPER though). Add
semantic checks for these clauses in the TARGET UPDATE construct, TODO
messages in lowering.
Issue deprecation warning for these directives.
Lowering currently supports parallel master, for all other combined or
composite directives involving master, issue TODO errors.
Note: The first commit changes the formatting and generalizes the
deprecation message emission for reuse in the second commit. I can pull
it out into a separate commit if required.
Parse the locator list in OmpDependClause as an OmpObjectList (instead
of a list of Designators). When a common block appears in the locator
list, show an informative message.
Implement resolving symbols in DependSinkVec in a dedicated visitor
instead of having a visitor for OmpDependClause.
Resolve unresolved names common blocks in OmpObjectList.
Minor changes to the code organization:
- rename OmpDependenceType to OmpTaskDependenceType (to follow 5.2
terminology),
- rename Depend::WithLocators to Depend::DepType,
- add comments with more detailed spec references to parse-tree.h.
---------
Co-authored-by: Kiran Chandramohan <kiran.chandramohan@arm.com>
Implement parsing of the AFFINITY clause on TASK construct, conversion
from the parser class to omp::Clause.
Lowering to HLFIR is unsupported, a TODO message is displayed.
Define `OmpIteratorSpecifier` and `OmpIteratorModifier` parser classes,
and add parsing for them. Those are reusable between any clauses that
use iterator modifiers.
Add support for iterator modifiers to the MAP clause up to lowering,
where a TODO message is emitted.
The convention is to use enum names that match the source spelling (up
to upper/lower case), including names with underscores.
Remove the special case from unparser, update tests.
This commit adds parsing of type modifiers for the MAP clause: CLOSE,
OMPX_HOLD, and PRESENT. The support for ALWAYS has already existed.
The new modifiers are not yet handled in lowering: when present, a TODO
message is emitted and compilation stops.
This patch implements support for the VECTOR ALWAYS directive, which
forces
vectorization to occurr when possible regardless of a decision by the
cost
model. This is done by adding an attribute to the branch into the loop
in LLVM
to indicate that the loop should always be vectorized.
This patch only implements this directive on plan structured do loops
without labels. Support for unstructured loops and array
expressions is planned for future patches.
This CDEFINED keyword extension to a language-binding-spec signifies
that static storage for an interoperable variable will be allocated
outside of Fortran, probably by a C/C++ external object definition.
Derived from #92480. This PR supports parsing of the DO CONCURRENT
REDUCE clause in Fortran 2023. Following the style of the OpenMP parser
in MLIR, the front end accepts both arbitrary operations and procedures
for the REDUCE clause. But later Semantics can notify type errors and
resolve procedure names.
omp masked directive in OpenMP 5.2 allows to specify code regions which
are expected to be executed by thread ids specified by the programmer.
Filter clause of the directive allows to specify the thread id. This
change adds the parsing support for the directive
A !$CUF KERNEL DO directive is allowed to have advisory REDUCE clauses
similar to those in OpenACC and DO CONCURRENT. Parse and represent them.
Semantic validation will follow.
Accept the reduction modifier in the Flang parser. Issue a TODO message
during lowering.
OpenMP 5.0 introduced the reduction modifier. Details can be seen in
2.19.5.4 reductionClause.
OpenMP 5.2 relevant section is 5.5.8reductionClause.
This will help remove some of the parser errors highlighted in the
following post and also bring it to a well defined behaviour (produce
TODO errors for unsupported features, do not crash).
https://discourse.llvm.org/t/proposal-rename-flang-new-to-flang/69462/60
Add `notify-type` to `iso_fortran_env` module. Add `notify-wait-stmt` to
the parser and add checks for constraints on the statement, `C1177` and
`C1178`, from the Fortran 2023 standard. Add three semantics tests for
`notify-wait-stmt`.
Fortran requires that a DO construct with a construct name end with an
END DO statement bearing the same name. This is true even if the DO
construct begins with a label DO statement; e.g., "constrName: do 10
j=1,10" must end with "10 end do constrName".
The compiler presently basically ignores construct names that appear on
label DO statements, because only non-label DO statements can be parsed
as DO constructs. This causes us to miss some errors, and (worse) breaks
the usage of the construct name on CYCLE and EXIT statements.
To fix this, this patch changes the parse tree and parser so that a DO
construct name on a putative label DO statement causes it to be parsed
as a "non-label" DO statement... with a label. Only true old-style
labeled DO statements without construct names are now parsed as such.
I did not change the class name NonLabelDoStmt -- it's widely used
across the front-end, and is the name of a production in the standard's
grammar. But now it basically means DoConstructDoStmt.
Fixes https://github.com/llvm/llvm-project/issues/67283.
Re-land commit 3787fd942f
This patch adds support for storing OpenMP REQUIRES information in the
semantics symbols for programs/subprograms and modules/submodules, and
populates them during directive resolution. A pass is added to name resolution
that makes sure this information is also propagated across top-level programs,
functions and subprograms.
Storing REQUIRES information inside of semantics symbols will also allow
supporting the propagation of this information across Fortran modules. This
will come as a separate patch.
The `bool DirectiveAttributeVisitor::Pre(const parser::SpecificationPart &x)`
method is removed since it resulted in specification parts being visited twice.
This is patch 3/5 of a series splitting D149337 to simplify review.
Differential Revision: https://reviews.llvm.org/D157983
