We currently don't match this which limits the effectiveness of D91120 until
InstCombine starts canonicalizing to llvm.abs. This should be easy to remove
if/when we remove the SPF_ABS handling.
Differential Revision: https://reviews.llvm.org/D92118
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
During reviewing https://reviews.llvm.org/D84419, @efriedma mentioned the gap between realigned stack pointer and origin stack pointer should be probed too whatever the alignment is. This patch fixes the issue for PPC64.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D88078
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
`SimplifySetCC` invokes `getNodeIfExists` without passing `Flags` argument and `getNodeIfExists` uses a default `SDNodeFlags` to intersect the original flags, as a consequence, flags like `nsw` is dropped. Added a new helper function `doesNodeExist` to check if a node exists without modifying its flags.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D89938
This patch is the initial patch for support of the AIX extended vector ABI. The extended ABI treats vector registers V20-V31 as non-volatile and we add them as callee saved registers in this patch.
Reviewed By: sfertile
Differential Revision: https://reviews.llvm.org/D88676
For now, we are using the GPR to pass the arguments/return value for fp128 on Power8,
which is incorrect. It should be VSR. The reason why we do it this way is that,
we are setting the fp128 as illegal which make LLVM try to emulate it with i128 on
Power8. So, we need to correct it as legal.
Reviewed By: Nemanjai
Differential Revision: https://reviews.llvm.org/D91527
Added support for the options mabi=vec-extabi and mabi=vec-default which are analogous to qvecnvol and qnovecnvol when using XL on AIX.
The extended Altivec ABI on AIX is enabled using mabi=vec-extabi in clang and vec-extabi in llc.
Reviewed By: Xiangling_L, DiggerLin
Differential Revision: https://reviews.llvm.org/D89684
When the operand to an (s/u)int_to_fp node is an illegally typed load we
cannot reuse the load address since we can not build a proper dependancy
chain. The legalized loads will use a different chain output then the
illegal load. If we reuse the load address then we will build a
conversion node that uses the chain of the illegal load and operations
which modify the memory address in the other dependancy chain can be
scheduled before the floating point load which feeds the conversion.
Differential Revision: https://reviews.llvm.org/D91265
Putting the +1 before the zero-extend will allow scalar evolution to fold the expression in some cases such as the one shown in PowerPC's `shrink-wrap.ll` test.
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D91724
New pseudo instructions GETtlsADDRPCREL and GETtlsldADDRPCREL are added for properly
setting REGMASK for tls_get_addr function when using PCRelative address.
Differential Revisien: https://reviews.llvm.org/D91420
Reviewed by: bsaleil
It is possible that we have different constants in different slots
of second vector double (float) of pow function. So, in this case
Exp->getSplatValue() will return nullptr. Here, I handle it properly.
Reviewed By: steven.zhang, PowerPC
Differential Revision: https://reviews.llvm.org/D91729
Support reserved [0-100] and non-reserved[101-65535] Clang/GNU init
priority values on AIX.
This patch maps Clang/GNU values into priority values used in sinit/sterm
functions. User can play with values and be able to get init to occur
before or after XL init and vice versa.
Differential Revision: https://reviews.llvm.org/D91272
Summary: We have the patterns to fold 2 RLWINMs before RA, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization too.
Reviewed By: shchenz
Differential Revision: https://reviews.llvm.org/D89855
In some situations, the compiler may insert an accumulator prime instruction and
an accumulator unprime instruction with no use of that accumulator between the two.
That's for example the case when we store an accumulator after assembling it or
restoring it. This patch adds a peephole to remove these prime and unprime instructions.
Differential Revision: https://reviews.llvm.org/D91386
This patch is added to remove the unreachable MBBs reference in the jump table.
Differential Revisien: https://reviews.llvm.org/D90498
Reviewed by: amyk, bsaleil
Summary: This patch try to do the following transformation if the multiplier doen't fit int16:
(mul X, c1 << c2) -> (rldicr (mulli X, c1) c2)
Reviewed By: jsji, steven.zhang
Differential Revision: https://reviews.llvm.org/D87384
This to help review the impact of https://reviews.llvm.org/D89952 which
allows targets to fine tune what SelectionDAG does when vector CTPOP is
not legal.
Add more profitable sinking patterns if the target bb register pressure
is not too high.
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D88126
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
Summary: This patch depends on D89846. We have the patterns to fold 2 RLWINMs in ppc-mi-peephole, while some RLWINM will be generated after RA, for example rGc4690b007743. If the RLWINM generated after RA followed by another RLWINM, we expect to perform the optimization after RA, too.
Reviewed By: shchenz, steven.zhang
Differential Revision: https://reviews.llvm.org/D89855
Vector types, quadword integers and f128 currently cannot be handled in
FastISel. We did not skip f128 type in lowering arguments, which causes
a crash. This patch will fix it.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90206
Variable InnerIsSel references FalseRes, while FalseRes might be
zext/sext. So InnerIsSel should reference SetOrSelCC, otherwise a crash
will happen.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D90142
Unsigned 32-bit or shorter integer to ppcf128 conversion are currently
expanded as signed-to-double with an extra fadd to 'complement'. But on
PowerPC we have native instruction to directly convert unsigned to
double since ISA v2.06. This patch exploits it.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89786
When converting a BUILD_VECTOR or VECTOR_SHUFFLE to a splatting load
as of 1461fb6e78, we inaccurately check
for a single user of the load and neglect to update the users of the
output chain of the original load. As a result, we can emit a new
load when the original load is kept and the new load can be reordered
after a dependent store. This patch fixes those two issues.
Fixes https://bugs.llvm.org/show_bug.cgi?id=47891
Turn on TLS support for PCRel by default and update the test cases.
Differential Revision: https://reviews.llvm.org/D88738
Reviewed by: stefanp, kamaub
This patch implements the set boolean condition instructions introduced in
POWER10.
The set boolean condition instructions (set[n]bc[r]) are used during
the following situations:
- sign/zero/any extending i1 to an i32 or i64,
- reg+reg, reg+imm or floating point comparisons being sign/zero extended to i32 or i64,
- spilling CR bits (using the setnbc instruction)
Differential Revision: https://reviews.llvm.org/D87705
