Reverted because the compile time impact is still too high.
isKnownViaNonRecursiveReasoning is used twice, we can do it just once.
Differential Revision: https://reviews.llvm.org/D92152
Previously we tried to using isKnownPredicateAt, but it makes an
extra query to isKnownPredicate, which has negative impact on compile
time. Let's try to use more lightweight isBasicBlockEntryGuardedByCond.
Differential Revision: https://reviews.llvm.org/D92152
A piece of code in `isLoopBackedgeGuardedByCond` basically duplicates
the dominators traversal from `isBlockEntryGuardedByCond` called from
`isKnownPredicateAt`, but it's less powerful because it does not give context
to `isImpliedCond`. This patch reuses the `isKnownPredicateAt `function there,
reducing the amount of code duplication and making it more powerful.
Differential Revision: https://reviews.llvm.org/D92152
Reviewed By: skatkov
If we've got an SCEVPtrToIntExpr(op), where op is not an SCEVUnknown,
we want to sink the SCEVPtrToIntExpr into an operand,
so that the operation is performed on integers,
and eventually we end up with just an `SCEVPtrToIntExpr(SCEVUnknown)`.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D89692
And use it to model LLVM IR's `ptrtoint` cast.
This is essentially an alternative to D88806, but with no chance for
all the problems it caused due to having the cast as implicit there.
(see rG7ee6c402474a2f5fd21c403e7529f97f6362fdb3)
As we've established by now, there are at least two reasons why we want this:
* It will allow SCEV to actually model the `ptrtoint` casts
and their operands, instead of treating them as `SCEVUnknown`
* It should help with initial problem of PR46786 - this should eventually allow us
to not loose pointer-ness of an expression in more cases
As discussed in [[ https://bugs.llvm.org/show_bug.cgi?id=46786 | PR46786 ]], in principle,
we could just extend `SCEVUnknown` with a `is ptrtoint` cast, because `ScalarEvolution::getPtrToIntExpr()`
should sink the cast as far down into the expression as possible,
so in the end we should always end up with `SCEVPtrToIntExpr` of `SCEVUnknown`.
But i think that it isn't the best solution, because it doesn't really matter
from memory consumption side - there probably won't be *that* many `SCEVPtrToIntExpr`s
for it to matter, and it allows for much better discoverability.
Reviewed By: mkazantsev
Differential Revision: https://reviews.llvm.org/D89456
We cannot guarantee that the replacement expression is loop-invariant in
all AddRecs in the source expression. Use a rewriter that skips
AddRecExpr for now.
Fixes PR47776.
Use SCEV to salvage additional @llvm.dbg.value that have turned into
referencing undef after transformation (and traditional
salvageDebugInfo). Before transformation compute SCEV for each
@llvm.dbg.value in the loop body and store it (along side its current
DIExpression). After transformation update those @llvm.dbg.value now
referencing undef by comparing its stored SCEV to the SCEV of the
current loop-header PHI-nodes. Allow match with offset by inserting
compensation code in the DIExpression.
Includes fix for the nullptr deref that caused the original commit
to be reverted in 9d63029770.
Fixes : PR38815
Differential Revision: https://reviews.llvm.org/D87494
This reverts commit a3caf7f610.
The ReleaseLTO-g test-suite configuration has been failing
to build since this commit, because clang segfaults while
building 7zip.
Use SCEV to salvage additional @llvm.dbg.value that have turned into
referencing undef after transformation (and traditional
salvageDebugInfo). Before transformation compute SCEV for each
@llvm.dbg.value in the loop body and store it (along side its current
DIExpression). After transformation update those @llvm.dbg.value now
referencing undef by comparing its stored SCEV to the SCEV of the
current loop-header PHI-nodes. Allow match with offset by inserting
compensation code in the DIExpression.
Fixes : PR38815
Differential Revision: https://reviews.llvm.org/D87494
This commit was originally because it was suspected to cause a crash,
but a reproducer did not surface.
A crash that was exposed by this change was fixed in 1d8f2e5292.
This reverts the revert commit 0581c0b0ee.
This prevents us from doing things like LICM'ing it out of a loop,
which is usually a net loss because we end up having to spill a
callee-saved FPR to accomodate it.
This does perturb instruction scheduling around this instruction,
so a number of tests had to be updated to account for it.
Reviewed By: t.p.northover
Differential Revision: https://reviews.llvm.org/D87316
In GenerateConstantOffsetsImpl, we may generate non canonical Formula
if BaseRegs of that Formula is updated and includes a recurrent expr reg
related with current loop while its ScaledReg is not.
Patched by: mdchen
Reviewed By: qcolombet
Differential Revision: https://reviews.llvm.org/D86939
This reverts commit e441b7a7a0.
This patch causes a compile error in tensorflow opensource project. The stack trace looks like:
Point of crash:
llvm/include/llvm/Analysis/LoopInfoImpl.h : line 35
(gdb) ptype *this
type = const class llvm::LoopBase<llvm::BasicBlock, llvm::Loop> [with BlockT = llvm::BasicBlock, LoopT = llvm::Loop]
(gdb) p *this
$1 = {ParentLoop = 0x0, SubLoops = std::vector of length 0, capacity 0, Blocks = std::vector of length 0, capacity 1,
DenseBlockSet = {<llvm::SmallPtrSetImpl<llvm::BasicBlock const*>> = {<llvm::SmallPtrSetImplBase> = {<llvm::DebugEpochBase> = {Epoch = 3}, SmallArray = 0x1b2bf6c8, CurArray = 0x1b2bf6c8,
CurArraySize = 8, NumNonEmpty = 0, NumTombstones = 0}, <No data fields>}, SmallStorage = {0xfffffffffffffffe, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0}}, IsInvalid = true}
(gdb) p *this->DenseBlockSet->CurArray
$2 = (const void *) 0xfffffffffffffffe
I will try to get a case from tensorflow or use creduce to get a small case.
Now that SCEVExpander can preserve LCSSA form,
we do not have to worry about LCSSA form when
trying to look through PHIs. SCEVExpander will take
care of inserting LCSSA PHI nodes as required.
This increases precision of the analysis in some cases.
Reviewed By: mkazantsev, bmahjour
Differential Revision: https://reviews.llvm.org/D71539
Currently the SCEVExpander tries to re-use existing casts, even if they
are not exactly at the insertion point it was asked to create the cast.
To do so in some case, it creates a new cast at the insertion point and
updates all users to use the new cast.
This behavior is problematic, because it changes the IR outside of the
instructions created during the expansion. Therefore we cannot
completely undo all changes made during expansion.
This re-use should be only an extra optimization, so only using the new
cast in the expanded instructions should not be a correctness issue.
There are many cases equivalent instructions are created during
expansion.
This patch also adjusts findInsertPointAfter to skip instructions
inserted during expansion. This enables re-using existing casts without
the renaming any uses, by picking a better insertion point.
Reviewed By: efriedma, lebedev.ri
Differential Revision: https://reviews.llvm.org/D84399
querying getSCEV() for incomplete phis leads to wrong cache value in `ExprToIVMap`,
because incomplete phis may be simplified to same value before get SCEV expression.
Reviewed By: lebedev.ri, mkazantsev
Differential Revision: https://reviews.llvm.org/D77560
The test is quite frafile, as the check lines match IR numbers and it is
not obvious why only a very small subset is checked.
Re-generate check lines, so further changes are more obvious.
The legacy pass was called "loop-reduce".
This lowers the number of check-llvm failures under NPM by 83.
Reviewed By: ychen
Differential Revision: https://reviews.llvm.org/D82925
Summary:
In SCEVExpander FactorOutConstant(), when GEP indexing into/over scalable vector,
it is legal for the 'Factor' in a MulExpr to be the size of a scalable vector
instead of a compile-time constant.
Current upstream crash with the test attached.
Reviewers: efriedma, sdesmalen, sanjoy.google, mkazantsev
Reviewed By: efriedma
Subscribers: hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80973
This patch adds a new TTI hook to allow targets to tell LSR that
a chain including some instruction is already profitable and
should not be optimized. This patch also adds an implementation
of this TTI hook for ARM so LSR doesn't optimize chains that include
the VCTP intrinsic.
Differential Revision: https://reviews.llvm.org/D79418
greater-than-sign is not a BRE special character.
POSIX.1-2017 XBD Section 9.3.2 indicates that the interpretation of `\>`
is undefined. This patch replaces the pattern.
llvm-svn: 363828
Second functional change following on from rL362687. Pass the
NoWrapFlags from the MulExpr to InsertBinop when we're generating a
shl or mul.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363540
InsertBinop now accepts NoWrapFlags, so pass them through when
expanding a simple add expression.
This is the first re-commit of the functional changes from rL362687,
which was previously reverted.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363364
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
Summary:
Currently we express umin as `~umax(~x, ~y)`. However, this becomes
a problem for operands in non-integral pointer spaces, because `~x`
is not something we can compute for `x` non-integral. However, since
comparisons are generally still allowed, we are actually able to
express `umin(x, y)` directly as long as we don't try to express is
as a umax. Support this by adding an explicit umin/smin representation
to SCEV. We do this by factoring the existing getUMax/getSMax functions
into a new function that does all four. The previous two functions were
largely identical.
Reviewed By: sanjoy
Differential Revision: https://reviews.llvm.org/D50167
llvm-svn: 360159
In some circumstances we can end up with setup costs that are very complex to
compute, even though the scevs are not very complex to create. This can also
lead to setupcosts that are calculated to be exactly -1, which LSR treats as an
invalid cost. This patch puts a limit on the recursion depth for setup cost to
prevent them taking too long.
Thanks to @reames for the report and test case.
Differential Revision: https://reviews.llvm.org/D60944
llvm-svn: 358958
