On x86/x86_64 read only watchpoints aren't supported. Fall back
to read/write watchpoints in that case.
Note: Logic should be added to ignore the watchpoint hit when
occurred because of a write.
llvm-svn: 244742
This is more preparation for multiple different kinds of types from different compilers (clang, Pascal, Go, RenderScript, Swift, etc).
llvm-svn: 244689
The issue was we were sending a "qSymbol::" packet and it we were already disconnected were weren't exiting the while loop if we didn't successfully send the qSymbol packet.
<rdar://problem/22098746>
llvm-svn: 244683
This change :
- Fixes offsets of all register sets for Mips.
- Adds MSA register set and FRE=1 mode support for FP register set.
- Separates lldb register numbers and register infos of freebsd/mips64 from linux/mips64.
- Re-orders the register numbers of all kinds for mips to be consistent with freebsd order of register numbers.
- Eliminates ENABLE_128_BIT_SUPPORT and union ValueData from Scalar.cpp and uses llvm::APInt and llvm::APFloat for all integer and floating point types.
Reviewers : emaste, jaydeep, clayborg
Subscribers : emaste, mohit.bhakkad, nitesh.jain, bhushan
Differential : http://reviews.llvm.org/D10919
llvm-svn: 244308
working with (the Communication m_bytes ivar) contained a single packet.
Instead, it may contain multitudes. Find the boundaries of the first packet
in the buffer and replace that with the decompressed version leaving the
rest of the buffer unmodified.
<rdar://problem/21841377>
llvm-svn: 243846
On FreeBSD the tid is (somewhat unintuitively) found in the pr_pid
field of the NT_PRSTATUS note. Collect it when parsing the note and
store it in the thread data.
For Linux I've left the original behaviour of using sequential TIDs
(0, 1, 2...) as I don't yet have code to obtain it.
Differential Revision: http://reviews.llvm.org/D11652
llvm-svn: 243748
Previously embedded interpreters were handled as ad-hoc source
files compiled into source/Interpreter. This made it hard to
disable a specific interpreter, or to add support for other
interpreters and allow the developer to choose which interpreter(s)
were enabled for a particular build.
This patch converts script interpreters over to a plugin-based system.
Script interpreters now live in source/Plugins/ScriptInterpreter, and
the canonical LLDB interpreter, ScriptInterpreterPython, is moved there
as well.
Any new code interfacing with the Python C API must live in this location
from here on out. Additionally, generic code should never need to
reference or make assumptions about the presence of a specific interpreter
going forward.
Differential Revision: http://reviews.llvm.org/D11431
Reviewed By: Greg Clayton
llvm-svn: 243681
Summary:
If we used unnamed pipes instead of named pipes, we can avoid having the
file system littered with debugserver-named-pipes if lldb-server happens to
crash for whatever reason. Also, on some buggy systems, it's possible to be
able to create but not to delete a fifo. Ideally, support for unnamed pipes
should be added to debugserver as well, so we can avoid the `#ifdef` here.
Reviewers: clayborg, vharron, chying
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11609
llvm-svn: 243667
Summary:
This commit moves the m_spawned_pids member from the common LLGS/Platform class to the plaform
specific part. This enables us to remove LLGS code, which was attempting to manage the
m_spawned_pids contents, but at the same time making sure, there is only one debugged process. If
we ever want to do multi-process debugging, we will probably want to replace this with a set of
NativeProcessProtocolSP anyway. The only functional change is that support for
qKillSpawnedProcess packet is removed from LLGS, but this was not used there anyway (we have the
k packet for that).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11557
llvm-svn: 243513
system, make a couple of additional checks to see if the
attach was denied via the System Integrity Protection that
is new in Mac OS X 10.11. If so, return a special E87
error code to indicate this to lldb.
Up in lldb, if we receive the E87 error code, be specific
about why the attach failed.
Also detect the more common case of general attach failure
and print a better error message than "lost connection".
I believe this code will all build on Mac OS X 10.10 systems.
It may not compile or run on earlier versions of the OS.
None of this should build on other non-darwin systems.
llvm-svn: 243511
The removal of in-process Linux debug support left a switch statement
with llvm::Triple::FreeBSD as the only case. Simplify by replacing it
with a now-equivalent assertion.
llvm-svn: 243468
As of r240543 ProcessPOSIX and POSIXThread are used only on FreeBSD, so
just roll them into ProcessFreeBSD and FreeBSDThread.
Differential Revision: http://reviews.llvm.org/D10698
llvm-svn: 243427
Summary:
Handle_k was printing an error when killing a process because KillSpawnedProcess was expecting to
be asynchronously notified of the process death, which no longer works, since we don't wait for
the process on a separate thread. However, the whole usage of KillSpawnedProcess is dubious here,
since it tries to be nice and terminate the process first with SIGTERM, which will not have the
intended effect on a ptraced process. I replace this code with a call to
NativeProcessProtocol::Kill, which does not suffer from these problems.
Reviewers: chaoren, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11520
llvm-svn: 243397
SUMMARY:
This patch fixes couple of issues:
1. A thread tries to lock a mutex which is already locked.
2. Updating a thread list before the stop packet is parsed so that it can get a valid thread id and allows to set the stop info correctly.
Reviewers: clayborg
Subscribers: mohit.bhakkad, sagar, jaydeep, lldb-commits
Differential Revision: http://reviews.llvm.org/D11449
llvm-svn: 243091
Summary:
This replaces (void)x; usages where they x was subsequently
involved in an assertion with this macro to make the
intent more clear.
Reviewers: clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11451
llvm-svn: 243074
Summary:
GetLoadedModuleFileSpec was reading /proc/pid/maps character by character, which was very slow,
since we do that for every shared library, which android tends to have a lot. Switching to
ProcFileReader saves us about 0.4 seconds in attach time.
Reviewers: tberghammer
Subscribers: tberghammer, danalbert, lldb-commits
Differential Revision: http://reviews.llvm.org/D11460
llvm-svn: 243019
Summary:
This adds support for jstopinfo field of stop-reply packets. This field enables us to avoid
querying full thread stop data on most stops (see r242593 for more details).
Reviewers: ovyalov, clayborg
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11415
llvm-svn: 242997
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
This is a resubmission of r242305 after it was reverted due to bad interactions with the stdio
thread.
llvm-svn: 242783
Summary:
This commit removes the stdio forwarding thread in lldb-server in favor of a MainLoop callback.
As in some situations we need to forcibly flush the stream ( => Read() is called from multiple
places) and we still have multiple threads, I have had to additionally protect the communication
instance with a mutex.
Reviewers: ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11296
llvm-svn: 242782
Make sure we dont treat EINTR as a fatal error. I was getting this when trying to profile the
debugger. I'm not sure why this wasn't surfacing before, it could be that the profiler is using
some signals internally.
llvm-svn: 242681
Changed the "jthreads" key/value in the stop reply packets to be "jstopinfo". This JSON only contains threads with valid stop reasons and allows us not to have to ask about other threads via qThreadStopInfo when we are stepping. The "jstopinfo" only gets sent if there are more than one thread since the stop reply packet contains all the info needed for a single thread.
Added a Process::WillPublicStop() in case process subclasses want to do any extra gathering for public stops. For ProcessGDBRemote, we end up sending a jThreadsInfo packet to gather all expedited registers, expedited memory and MacOSX queue information. We only do this for public stops to minimize the packets we send when we have multiple private stops. Multiple private stops happen when a source level single step, step into or step out run the process multiple times while implementing the stepping, and none of these private stops make it out to the UI via notifications because they are private stops.
llvm-svn: 242593
Summary:
It seems that reading of register data is the biggest bottleneck in LLGS at the moment. Sending
four registers instead of the full GPR set increases the jThreadsInfo processing time about
6-fold. Until we figure out where is this time going, this commit limits the amount of data we
send to provide a more fluid debugging experience.
Reviewers: tberghammer, ovyalov
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11264
llvm-svn: 242517
Summary:
This commit adds initial support for the jThreadsInfo packet to lldb-server. The current
implementation does not expedite inferior memory. I have also added a description of the new
packet to our protocol documentation (mostly taken from Greg's earlier commit message).
Reviewers: clayborg, ovyalov, tberghammer
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11187
llvm-svn: 242402
This allows stepping operations that don't ever do a public stop to get all the info they need without having to send a jThreadsInfo packet since those tend to be large.
This patch will be followed by a patch that will detect when we do a public stop, and when that happens we will send a jThreadsInfo packet at that time to get all expedited registers and memory.
llvm-svn: 242352
This one I accidentally missed last time because I confused it with
the lldbUtility library. After this, all makefile libraries should
have the same names as their CMake counterparts.
llvm-svn: 242344
Summary:
This commit integrates MainLoop into NativeProcessLinux. By registering a SIGCHLD handler with
the llgs main loop, we can get rid of the special monitor thread in NPL, which saves as a lot of
thread ping-pong when responding to client requests (e.g. qThreadInfo processing time has been
reduced by about 40%). It also makes the code simpler, IMHO.
Reviewers: ovyalov, clayborg, tberghammer, chaoren
Subscribers: lldb-commits
Differential Revision: http://reviews.llvm.org/D11150
llvm-svn: 242305
should send when detaching and leaving the remote process/system
halted. Previously only the 'D' initial char was sent, which
resumed the process like a normal detach.
llvm-svn: 242256
Summary:
- Consolidate Unix signals selection in UnixSignals.
- Make Unix signals available from platform.
- Add jSignalsInfo packet to retrieve Unix signals from remote platform.
- Get a copy of the platform signal for each remote process.
- Update SB API for signals.
- Update signal utility in test suite.
Reviewers: ovyalov, clayborg
Subscribers: chaoren, jingham, labath, emaste, tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11094
llvm-svn: 242101
Summary:
This is the first part of our effort to make llgs single threaded. Currently, llgs consists of
about three threads and the synchronisation between them is a major source of latency when
debugging linux and android applications.
In order to be able to go single threaded, we must have the ability to listen for events from
multiple sources (primarily, client commands coming over the network and debug events from the
inferior) and perform necessary actions. For this reason I introduce the concept of a MainLoop.
A main loop has the ability to register callback's which will be invoked upon receipt of certain
events. MainLoopPosix has the ability to listen for file descriptors and signals.
For the moment, I have merely made the GDBRemoteCommunicationServerLLGS class use MainLoop
instead of waiting on the network socket directly, but the other threads still remain. In the
followup patches I indend to migrate NativeProcessLinux to this class and remove the remaining
threads.
Reviewers: ovyalov, clayborg, amccarth, zturner, emaste
Subscribers: tberghammer, lldb-commits
Differential Revision: http://reviews.llvm.org/D11066
llvm-svn: 242018
jGetLoadedDynamicLibrariesInfos. This packet is similar to
qXfer:libraries:read except that lldb supplies the number of solibs
that should be reported about, and the start address for the list
of them. At the initial process launch we'll read the full list
of solibs linked by the process -- at this point we could be using
qXfer:libraries:read -- but on subsequence solib-loaded notifications,
we'll be fetching a smaller number of solibs, often only one or two.
A typical Mac/iOS GUI app may have a couple hundred different
solibs loaded - doing all of the loads via memory reads takes
a couple of megabytes of traffic between lldb and debugserver.
Having debugserver summarize the load addresses of all the solibs
and sending it in JSON requires a couple of hundred kilobytes
of traffic. It's a significant performance improvement when
communicating over a slower channel.
This patch leaves all of the logic for loading the libraries
in DynamicLoaderMacOSXDYLD -- it only call over ot ProcesGDBRemote
to get the JSON result.
If the jGetLoadedDynamicLibrariesInfos packet is not implemented,
the normal technique of using memory read packets to get all of
the details from the target will be used.
<rdar://problem/21007465>
llvm-svn: 241964
