Add a new serial:// protocol along with SerialPort that provides a new
API to open serial ports. The URL consists of serial device path
followed by URL-style options, e.g.:
serial:///dev/ttyS0?baud=115200&parity=even
If no options are provided, the serial port is only set to raw mode
and the other attributes remain unchanged. Attributes provided via
options are modified to the specified values. Upon closing the serial
port, its original attributes are restored.
Differential Revision: https://reviews.llvm.org/D111355
gdbserver does not expose combined ymm* registers but rather XSAVE-style
split xmm* and ymm*h portions. Extend value_regs to support combining
multiple registers and use it to create user-friendly ymm* registers
that are combined from split xmm* and ymm*h portions.
Differential Revision: https://reviews.llvm.org/D108937
gdbserver does not expose combined ymm* registers but rather XSAVE-style
split xmm* and ymm*h portions. Extend value_regs to support combining
multiple registers and use it to create user-friendly ymm* registers
that are combined from split xmm* and ymm*h portions.
Differential Revision: https://reviews.llvm.org/D108937
Fix a bug introduced while refactoring ABIAArch64::AugmentRegisterInfo()
that caused subregisters to be added even if they were already present.
Instead, abort immediately if at least one subregister is found
(following ABIX86). While at it, add a test for that.
Differential Revision: https://reviews.llvm.org/D111881
Adjust the encoding and format applied to i387_ext and vec* type
registers from gdbserver to match lldb-server. Both types are now
displayed as vector of uint8 instead of float and integer formats used
before. Additionally, this fixes display of STi registers when they do
not carry floating-point data (they are also used to hold MMX vectors).
Differential Revision: https://reviews.llvm.org/D108468
Remove the redudant "0x" prefix in the "dirty-pages" key of
qMemoryRegionInfo packet. The client accepts hex values both with
and without the prefix.
Differential Revision: https://reviews.llvm.org/D110510
Create pseudo-registers on the AArch64 target if they are not provided
by the remote server. This is the case for gdbserver. The created
registers are:
- 32-bit wN partials for 64-bit xN registers
- double precision floating-point dN registers (overlapping with vN)
- single precision floating-point sN registers (overlapping with vN)
Differential Revision: https://reviews.llvm.org/D109876
Rewrite the register reading/writing tests to use explicit qRegisterInfo
packets rather than relying on ARM registers being hardcoded in LLDB.
While at it, use x86_64 for tests -- since it was easier for me to get
the register lists from that architecture.
Differential Revision: https://reviews.llvm.org/D111496
This patch allows LLDB to accept register sizes which are not aligned
to 8 bits bitsize boundary. This fixes a crash in LLDB when connecting
to OpenOCD stub. GDB xml description allows for non-aligned bit lengths
but they are rounded off to nearest byte during transfer. In case of
OpenOCD some of SOC specific system registers were less than a single
byte in length and were causing LLDB to crash.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D111131
Fix the termination of "process connect" (and "gdb-remote") to kill
the process rather than attempting to disconnect the platform.
The latter only results in an error since we did not use "platform
connect", and apparently process-level connections (at least via
gdb-remote) do not really support disconnecting.
Differential Revision: https://reviews.llvm.org/D110996
If the remote gdbserver's qfThreadInfo reply has a trailing comma,
GDBRemoteCommunicationClient::GetCurrentProcessAndThreadIDs will return
an empty vector of thread ids. This will cause lldb to recurse through
three functions trying to get the list of threads, until it blows its
stack and crashes.
A trailing comma is a malformed response, but it shouldn't cause lldb to
crash. This patch will return the tids received before the malformed
response.
Reviewed By: clayborg, labath
Differential Revision: https://reviews.llvm.org/D109937
Always send PID in the detach packet when multiprocess extensions are
enabled. This is required by qemu's GDB server, as plain 'D' packet
results in an error and the emulated system is not resumed.
Differential Revision: https://reviews.llvm.org/D110033
Alias the "sp" register to "x31" on AArch64 if one is present and does
not have the alt_name. This is the case when connecting to gdbserver.
Differential Revision: https://reviews.llvm.org/D109695
Recognize lr/sp/fp by their numeric register names in the ABI plugin.
This is necessary to mark them appropriately when interfacing with
gdbserver.
Differential Revision: https://reviews.llvm.org/D109691
Try determining the process architecture from <architecture/> tag
unconditionally, rather than for very specific cases. Generic gdbserver
implementations do not support LLDB-specific packets used to determine
the process architecture, therefore this fallback is necessary to
support architecture-specific behavior on these targets. Rather than
maintaining a mapping of all known architectures, just try mapping
the GDB values into triplets, as that is going to work most of the time.
This change is confirmed to fix LLDB against gdbserver when debugging
i386 and aarch64 executables.
Differential Revision: https://reviews.llvm.org/D109272
Update GetRegisterInfoByName() methods to support getting registers
by a generic name independently of alt_name entries in the register
context. This makes it possible to use generic names when interacting
with gdbserver (that does not supply alt_names). It also makes it
possible to remove some of the duplicated information from register
context declarations and/or use alt_names for another purpose.
Differential Revision: https://reviews.llvm.org/D108554
GDB uses normalized errno values for vFile errors. Implement
the translation between them and system errno values in the gdb-remote
plugin.
Differential Revision: https://reviews.llvm.org/D108148
Fall back to QEnvironmentHexEncoded if QEnvironment is not supported.
The latter packet is an LLDB extension, while the former is universally
supported.
Add tests for both QEnvironment and QEnvironmentHexEncoded packets,
including both use due to characters that need escaping and fallback
when QEnvironment is not supported.
Differential Revision: https://reviews.llvm.org/D108018
Implement the simpler vRun packet and prefer it over the A packet.
Unlike the latter, it tranmits command-line arguments without redundant
indices and lengths. This also improves GDB compatibility since modern
versions of gdbserver do not implement the A packet at all.
Make qLaunchSuccess not obligatory when using vRun. It is not
implemented by gdbserver, and since vRun returns the stop reason,
we can assume it to be successful.
Differential Revision: https://reviews.llvm.org/D107931
Add a GDB-compatible fallback to vFile:fstat for vFile:mode, and to
vFile:open for vFile:exists. Note that this is only partial fallback,
as it fails if the file cannot be opened.
Differential Revision: https://reviews.llvm.org/D107811
Add two new commands 'platform get-file-permissions' and 'platform
file-exists' for the respective bits of LLDB protocol. Add tests for
them. Fix error handling in GetFilePermissions().
Differential Revision: https://reviews.llvm.org/D107809
Create a common GDBPlatformClientTestBase class and move the platform
select/connect logic there to reduce duplication.
Differential Revision: https://reviews.llvm.org/D109585
Implement a fallback to getting the file size via vFile:stat packet
when the remote server does not implement vFile:size. This makes it
possible to query file sizes from remote gdbserver.
Note that unlike vFile:size, the fallback will not work if the server is
unable to open the file.
While at it, add a few tests for the 'platform get-size' command.
Differential Revision: https://reviews.llvm.org/D107780
Remove File::eOpenOptionAppend from the mode used by 'platform file
open' command. According to POSIX, O_APPEND causes all successive
writes to be done at the end of the file. This effectively makes
the offset argument to 'platform file write' meaningless.
Furthermore, apparently O_APPEND is not implemented reliably everywhere.
The Linux manpage for pwrite(2) suggests that Linux does respect
O_APPEND there while according to POSIX it should not, so the actual
behavior would be dependent on how the vFile:pwrite packet is
implemented on the server.
Ideally, the mode used for opening flags would be provided via options.
However, changing the default mode seems to be a reasonable intermediate
solution.
Differential Revision: https://reviews.llvm.org/D107664
Fix 'platform file read' and 'platform file write' commands to correctly
detect erraneous return and report it as such. Currently, errors were
implicitly printed as a return value of -1, and the commands were
assumed to be successful.
Differential Revision: https://reviews.llvm.org/D107665
Remove software breakpoints from forked processes in order to restore
the original program code before detaching it.
Differential Revision: https://reviews.llvm.org/D100263
Add a support for handling fork/vfork stops in LLGS client. At this
point, it only sends a detach packet for the newly forked child
(and implicitly resumes the parent).
Differential Revision: https://reviews.llvm.org/D100206
Use hexadecimal numbers rather than decimal in various vFile packets
in order to fix compatibility with gdbserver. This also changes the few
custom LLDB packets -- while technically they do not have to be changed,
it is easier to use the same syntax consistently across LLDB.
Differential Revision: https://reviews.llvm.org/D107475
Sync the mode constants used to drive vFile:open requests with these
used by GDB and defined for the gdb remote protocol. This makes it
possible to use 'platform file open' after connecting to gdbremote
server (and to some degree to operate on the open file modulo other
incompatibilities).
Differential Revision: https://reviews.llvm.org/D106985
This reverts commit 82a3883715.
The original version had a copy-paste error: using the Interrupt timeout
for the ResumeSynchronous wait, which is clearly wrong. This error would
have been evident with real use, but the interrupt is long enough that it
only caused one testsuite failure (in the Swift fork).
Anyway, I found that mistake and fixed it and checked all the other places
where I had to plumb through a timeout, and added a test with a short
interrupt timeout stepping over a function that takes 3x the interrupt timeout
to complete, so that should detect a similar mistake in the future.
Add a new feature to process save-core on Darwin systems -- for
lldb to create a user process corefile with only the dirty (modified
memory) pages included. All of the binaries that were used in the
corefile are assumed to still exist on the system for the duration
of the use of the corefile. A new --style option to process save-core
is added, so a full corefile can be requested if portability across
systems, or across time, is needed for this corefile.
debugserver can now identify the dirty pages in a memory region
when queried with qMemoryRegionInfo, and the size of vm pages is
given in qHostInfo.
Create a new "all image infos" LC_NOTE for Mach-O which allows us
to describe all of the binaries that were loaded in the process --
load address, UUID, file path, segment load addresses, and optionally
whether code from the binary was executing on any thread. The old
"read dyld_all_image_infos and then the in-memory Mach-O load
commands to get segment load addresses" no longer works when we
only have dirty memory.
rdar://69670807
Differential Revision: https://reviews.llvm.org/D88387
This reverts commit bd5751f3d2.
This patch series is causing us to every so often miss switching
the state from eStateRunning to eStateStopped when we get the stop
packet from the debug server.
Reverting till I can figure out how that could be happening.
The gdb-remote tests are a bit artificial, depending on
Python threading, and sleeps. So I'm not 100% surprised it doesn't
work straight up on another XSsystem.
ProcessGDBRemote plugin layers.
Also fix a bug where if we tried to interrupt, but the ReadPacket
wakeup timer woke us up just after the timeout, we would break out
the switch, but then since we immediately check if the response is
empty & fail if it is, we could end up actually only giving a
small interval to the interrupt.
Differential Revision: https://reviews.llvm.org/D102085
This looks like just an oversight in the AsyncThread function. It gets a result of
eStateInvalid, and then marks the process as exited, but doesn't set "done" to true,
so we go to fetch another event. That is not safe, since you don't know when that
extra packet is going to arrive. If it arrives while you are tearing down the
process, the internal-state-thread might try to handle it when the process in not
in a good state.
Rather than put more effort into checking all the shutdown paths to make sure this
extra packet doesn't cause problems, just don't fetch it. We weren't going to do
anything useful with it anyway.
The main part of the patch is setting "done = true" when we get the eStateInvalid.
I also added a check at the beginning of the while(done) loop to prevent another error
from getting us to fetch packets for an exited process.
I added a test case to ensure that if an Interrupt fails, we call the process
exited. I can't test exactly the error I'm fixing, there's no good way to know
that the stop reply for the failed interrupt wasn't fetched. But at least this
asserts that the overall behavior is correct.
Differential Revision: https://reviews.llvm.org/D101933
This commit has caused the following tests to be flaky:
TestThreadSpecificBpPlusCondition.py
TestExitDuringExpression.py
The exact cause is not known yet, but since both tests deal with
threads, my guess is it has something to do with the tracking of
creation of new threads (which the commit touches upon).
This reverts the following commits:
d01bff8cbd,
ba62ebc48e,
e761b6b4c5,
a345419ee0.
Watch for fork(2)/vfork(2) (also fork/vfork-style clone(2) on Linux)
notifications and explicitly detach the forked child process, and add
initial tests for these cases. The code covers FreeBSD, Linux
and NetBSD process plugins. There is no new user-visible functionality
provided -- this change lays foundations over subsequent work on fork
support.
Differential Revision: https://reviews.llvm.org/D98822
Add a minimal support for the multiprocess extension in gdb-remote
client. It accepts PIDs as part of thread-ids, and rejects PIDs that
do not match the current inferior.
Differential Revision: https://reviews.llvm.org/D99603
