clang when given -g on Windows produces a PDB file. For whatever reason,
the test doesn't work with that.
-gdwarf produces DWARF regardless of platform.
Fixes 803f957e87.
I have to check for the sc list size being changed by the call-site
search, not just that it had more than one element.
Added a test for multiple CU's with the same name in a given module,
which would have caught this mistake.
We were also doing all the work to find call sites when the found decl
and specified decl's only difference was a column, but the incoming
specification hadn't specified a column (column number == 0).
When you set a "next branch breakpoint" and run to it while stepping,
you have to claim the stop at that breakpoint to be the top of the
inlined call stack, or you will seem to "step in" and then plans might
try to step back out again.
This records the PrefferedLineEntry for next branch breakpoints and adds
a test to make sure this works.
This reverts commit 25909b811a due to
unresolved questions about the behavior of "frame var" and ValueObject
in the presence of references (see the original patch for discussion).
Internally we use bazel in a way in which it can drop you in a LLDB
session with the target launched in a particular cwd, which is needed
for things to work. We've been making this automation work via `process
launch -w`. However, if later the user wants to restart the process with
`r`, then they end up using a different cwd for relaunching the process.
As a way to fix this, I'm adding a target-level setting that allows
configuring a default cwd used for launching the process without needing
the user to specify it manually.
A Clang change introduced in this version breaks this test. Said
change was reverted in `52a9ba7ca4fb9427706c28bb3ca15f7a56eecf3f`
in newer versions of Clang.
Remove lldb-repro which was used to run the test suite against a
reproducer. The corresponding functionality has been removed from LLDB
so there's no need for the tool anymore.
We had to disable the tests for libc++ <= 15 because the `std::ranges`
functions were not available, yet.
Also, on libc++17 there was still an additional `__fn` struct withing
`ranges::__sort`. The test expectation was updated to use a regular
expression, so we can match both the old and the new name.
See
https://green.lab.llvm.org/job/llvm.org/view/LLDB/job/lldb-cmake-matrix/912/execution/node/107/log/
The test is currently passing everywhere but this 32-bit arm ubuntu bot.
I don't have an easy way to debug this, so I'm skipping the test on that
platform till we get a chance to figure this out.
The computation of 'Thread::IsVirtualStep" was wrong - it called being
at the bottom of a virtual call stack a "virtual step" but that is
actually when you've gotten to concrete code and need to step for real.
I also added a test for this.
This fixes the two test suite failures that I missed in the PR:
https://github.com/llvm/llvm-project/pull/112939
One was a poorly written test case - it assumed that on connect to a
gdb-remote with a running process, lldb MUST have fetched all the frame
0 registers. In fact, there's no need for it to do so (as the CallSite
patch showed...) and if we don't need to we shouldn't. So I fixed the
test to only expect a `g` packet AFTER calling read_registers.
The other was a place where some code had used 0 when it meant
LLDB_INVALID_LINE_NUMBER, which I had fixed but missed one place where
it was still compared to 0.
The tests were using the variable directly to get the dwarf version used
for the test. That's only the overridden value, and won't be set if
we're using the compiler default. I also put a comment by the variable
to make sure people don't make the same mistake in the future.
When `FileAction` opens file with write access, it doesn't clear the
file nor append to the end of the file if it already exists. Instead, it
writes from cursor index 0.
For example, by using the settings `target.output-path` and
`target.error-path`, lldb will redirect process stdout/stderr to files.
It then calls this function to write to the files which the above
symptoms appear.
## Test
- Added unit test checking the file flags
- Added 2 api tests checking
- File content overwritten if the file path already exists
- Stdout and stderr redirection to the same file doesn't change its
behavior
…ne stepping (#112939)"
This was breaking some gdb-remote packet counting tests on the bots. I
can't see how this patch could cause that breakage, but I'm reverting to
figure that out.
This reverts commit f147437945.
Previously lldb didn't support setting breakpoints on call site
locations. This patch adds that ability.
It would be very slow if we did this by searching all the debug
information for every inlined subroutine record looking for a call-site
match, so I added one restriction to the call-site support. This change
will find all call sites for functions that also supply at least one
line to the regular line table. That way we can use the fact that the
line table search will move the location to that subsequent line (but
only within the same function). When we find an actually moved source
line match, we can search in the function that contained that line table
entry for the call-site, and set the breakpoint location back to that.
When I started writing tests for this new ability, it quickly became
obvious that our support for virtual inline stepping was pretty buggy.
We didn't print the right file & line number for the breakpoint, and we
didn't set the position in the "virtual inlined stack" correctly when we
hit the breakpoint. We also didn't step through the inlined frames
correctly. There was code to try to detect the right inlined stack
position, but it had been refactored a while back with the comment that
it was super confusing and the refactor was supposed to make it clearer,
but the refactor didn't work either.
That code was made much clearer by abstracting the job of "handling the
stack readjustment" to the various StopInfo's. Previously, there was a
big (and buggy) switch over stop info's. Moving the responsibility to
the stop info made this code much easier to reason about.
We also had no tests for virtual inlined stepping (our inlined stepping
test was actually written specifically to avoid the formation of a
virtual inlined stack... So I also added tests for that along with the
tests for setting the call-site breakpoints.
We have got customer reporting "v &obj" and "p &obj" reporting different
results.
Turns out it only happens for obj that is itself a reference type which
"v &obj" reports the address of the reference itself instead of the
target object the reference points to. This diverged from C++ semantics.
This PR fixes this issue by returning the address of the dereferenced
object if it is reference type.
A new test is added which fails before.
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
Bot maintainers should be aware and it became too much of a burden
for developers. In particular on Windows, where make.exe won't be
found in Path typically.
TestUseSourceCache attempts to write to a build artifact copied from the
source tree, and asserts the write succeeded. If the source tree is read
only, the copy will also be read only, causing it to fail. When
producing the build artifact, ensure that it is writable.
A memory region can be relatively large. Searching for a value in the
entire region is time-consuming, especially when running tests against a
remote target, because the memory data is transferred in small chunks
over a relatively slow GDB Remote Protocol. The patch limits the address
range to be searched to 2K, which seems sufficient for these tests. In
my setup, for local runs, these tests now take half the time they did
before the patch. For a remote target, the improvement is even more
significant.
The decorators caused the `test_set_use_source_cache_true()` test to be
skipped in most scenarios. It was only run on a Windows host targeting a
non-Windows remote platform. The source file is opened with the
`FILE_SHARE_DELETE` sharing mode, which allows the file to be removed
even though it is also memory-mapped; at least, this behavior is
observed on Windows 11.
The patch replaces the operation with an attempt to overwrite the file,
which still fails for such files on Windows 11.
This is a reduced test case from a crash we've observed in the past. The
assertion that this test triggers is:
```
Assertion failed: ((Pos == ImportedDecls.end() || Pos->second == To) && "Try to import an already imported Decl"), function MapImported, file ASTImporter.cpp, line 10494.
```
In a non-asserts build we crash later on in the ASTImporter. The root
cause is, as the assertion above points out, that we erroneously replace
an existing `From->To` decl mapping with a `To` decl that isn't
complete. Then we try to complete it but it has no definition and we
dereference a nullptr.
The reason this happens is basically what's been described in
https://reviews.llvm.org/D67803?id=220956#1676588
The dylib contains a definition of `Service` which is different to the
one in the main executable. When we start dumping the children of the
variable we're printing, we start completing it's members,
`ASTImport`ing fields in the process. When the ASTImporter realizes
there's been a name conflict (i.e., a structural mismatch on the
`Service` type) it would usually report back an error. However, LLDB
uses `ODRHandlingType::Liberal`, which means we create a new decl for
the ODR'd type instead of re-using the previously mapped decl.
Eventually this leads us to crash.
Ideally we'd be using `ODRHandlingType::Conservative` and warn/error,
though LLDB relies on this in some cases (particularly for
distinguishing template specializations, though maybe there's better a
way to deal with those).
We should really warn the user when this happens and not crash. To avoid
the crash we'd need to know to not create a decl for the ODR violation,
and instead re-use the definition we've previously seen. Though I'm not
yet sure that's viable for all of LLDB's use-cases (where ODR violations
might legimiately occur in a program, e.g., with opaque definitions,
etc.).
Recently my coworker @jeffreytan81 pointed out that Minidumps don't show
breakpoints when collected. This was prior blocked because Minidumps
could only contain 1 exception, now that we support N signals/sections
we can save all the threads stopped on breakpoints.
Line ending policies were changed in the parent, dccebddb3b. To make
it easier to resolve downstream merge conflicts after line-ending
policies are adjusted this is a separate whitespace-only commit. If you
have merge conflicts as a result, you can simply `git add --renormalize
-u && git merge --continue` or `git add --renormalize -u && git rebase
--continue` - depending on your workflow.
In recent PR https://github.com/llvm/llvm-project/pull/111531 for
Windows support, we enabled tests that require the `make` tool. On
Windows, default install directories likely contain spaces, in this case
e.g. `C:\Program Files (x86)\GnuWin32\bin\make.exe`. It's typically
handled well by CMake, so that today invocations from `dotest.py` don't
cause issues. However, we also have nested invocations from a number of
Makefiles themselves. These still failed if the path to the `make` tool
contains spaces.
This patch attempts to fix the functionalities/completion test by adding
quotes in the respective Makefile. If it keeps passing on the bots, we can
roll out the fix to all affected tests.
This is to fix buildbot failure
https://lab.llvm.org/staging/#/builders/195/builds/4255.
The test expects 'libstdc++' or 'libc++' SO module in the module list.
In case when static linking with libc++ is on by default, none of them
may be present.
Thus, USE_SYSTEM_STDLIB is added to ensure the presence of any of them.
---------
Co-authored-by: Vladimir Vereschaka <vvereschaka@accesssoftek.com>
This commit essentially reverts https://reviews.llvm.org/D30453.
In #109961, objcopy util search code was added to dotest.py. dotest.py
should use llvm-X by default if no path to a utility X is provided
externally.
However, it doesn't work out for llvm-objcopy, since objcopy path is
always overridden with the lines being removed here. It causes a problem
with cross-platform testing when objcopy used by cmake doesn't support
targets/executable file formats other than native.
I suppose these lines are unnecessary after #109961, so they can be
safely removed.
This allows IDEs to render LLDB expression diagnostics to their liking
without relying on characterprecise ASCII art from LLDB. It is exposed
as a versioned SBStructuredData object, since it is expected that this
may need to be tweaked based on actual usage.
This commit adds `valueLocationReference` to function pointers and
function references. Thereby, users can navigate directly to the
pointed-to function from within the "variables" pane.
In general, it would be useful to also a add similar location references
also to member function pointers, `std::source_location`,
`std::function`, and many more. Doing so would require extending the
formatters to provide such a source code location.
There were two RFCs about this a while ago:
https://discourse.llvm.org/t/rfc-extending-formatters-with-a-source-code-reference/68375https://discourse.llvm.org/t/rfc-sbvalue-metadata-provider/68377/26
However, both RFCs ended without a conclusion. As such, this commit now
implements the lowest-hanging fruit, i.e. function pointers. If people
find it useful, I will revive the RFC afterwards.
Reverting this again; I added a commit which added @skipIfDarwin
markers to the TestReverseContinueBreakpoints.py and
TestReverseContinueNotSupported.py API tests, which use lldb-server
in gdbserver mode which does not work on Darwin. But the aarch64 ubuntu
bot reported a failure on TestReverseContinueBreakpoints.py,
https://lab.llvm.org/buildbot/#/builders/59/builds/6397
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 63, in test_reverse_continue_skip_breakpoint
self.reverse_continue_skip_breakpoint_internal(async_mode=False)
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 81, in reverse_continue_skip_breakpoint_internal
self.expect(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 2372, in expect
self.runCmd(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 1002, in runCmd
self.assertTrue(self.res.Succeeded(), msg + output)
AssertionError: False is not true : Process should be stopped due to history boundary
Error output:
error: Process must be launched.
This reverts commit 4f297566b3.
