Summary:
Given a pattern like:
```
%old_cmp1 = icmp slt i32 %x, C2
%old_replacement = select i1 %old_cmp1, i32 %target_low, i32 %target_high
%old_x_offseted = add i32 %x, C1
%old_cmp0 = icmp ult i32 %old_x_offseted, C0
%r = select i1 %old_cmp0, i32 %x, i32 %old_replacement
```
it can be rewritten as more canonical pattern:
```
%new_cmp1 = icmp slt i32 %x, -C1
%new_cmp2 = icmp sge i32 %x, C0-C1
%new_clamped_low = select i1 %new_cmp1, i32 %target_low, i32 %x
%r = select i1 %new_cmp2, i32 %target_high, i32 %new_clamped_low
```
Iff `-C1 s<= C2 s<= C0-C1`
Also, `ULT` predicate can also be `UGE`; or `UGT` iff `C0 != -1` (+invert result)
Also, `SLT` predicate can also be `SGE`; or `SGT` iff `C2 != INT_MAX` (+invert result)
If `C1 == 0`, then all 3 instructions must be one-use; else at most either `%old_cmp1` or `%old_x_offseted` can have extra uses.
NOTE: if we could reuse `%old_cmp1` as one of the comparisons we'll have to build, this could be less limiting.
So there are two icmp's, each one with 3 predicate variants, so there are 9 fold variants:
| | ULT | UGE | UGT |
| SLT | https://rise4fun.com/Alive/yIJ | https://rise4fun.com/Alive/5BfN | https://rise4fun.com/Alive/INH |
| SGE | https://rise4fun.com/Alive/hd8 | https://rise4fun.com/Alive/Abk | https://rise4fun.com/Alive/PlzS |
| SGT | https://rise4fun.com/Alive/VYG | https://rise4fun.com/Alive/oMY | https://rise4fun.com/Alive/KrzC |
{F9730206}
This fold was brought up in https://reviews.llvm.org/D65148#1603922 by @dmgreen, and is needed to unblock that patch.
This patch requires D65530.
Reviewers: spatel, nikic, xbolva00, dmgreen
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits, dmgreen
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65765
llvm-svn: 368687
Summary:
This is rather unconventional..
As the comment there says, we don't have much folds for xor-of-icmps,
we try to turn them into an and-of-icmps, for which we have plenty of folds.
But if the ICmp we need to invert is not single-use - we give up.
As discussed in https://reviews.llvm.org/D65148#1603922,
we may have a non-canonical CLAMP pattern, with bit match and
select-of-threshold that we'll potentially clamp.
As it can be seen in `canonicalize-clamp-with-select-of-constant-threshold-pattern.ll`,
out of all 8 variations of the pattern, only two are **not** canonicalized into
the variant with and+icmp instead of bit math.
The reason is because the ICmp we need to invert is not single-use - we give up.
We indeed can't perform this fold at will, the general rule is that
we should not increase instruction count in InstCombine,
But we wouldn't end up increasing instruction count if we can adapt every other
user to the inverted value. This way the `not` we create **will** get folded,
and in the end the instruction count did not increase.
For that, of course, we need to look at the users of a Value,
which is again rather unconventional for InstCombine :S
Thus i'm proposing to be a little bit more insistive in `foldXorOfICmps()`.
The alternatives would be to not create that `not`, but add duplicate code to
manually invert all users; or to add some even less general combine to handle
some more specific pattern[s].
Reviewers: spatel, nikic, RKSimon, craig.topper
Reviewed By: spatel
Subscribers: hiraditya, jdoerfert, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65530
llvm-svn: 368685
Summary:
This commit fixed a race condition from multi-threaded thinLTO backends that causes non-deterministic memory corruption for a data structure used only by AutoFDO with compact binary profile.
GUIDToFuncNameMap, a static data member of type DenseMap in FunctionSamples is used as a per-module mapping from function name MD5 to name string when input AutoFDO profile is in compact binary format. However with ThinLTO, we can have parallel backends modifying and accessing the class static map concurrently. The fix is to make GUIDToFuncNameMap a member of SampleProfileLoader instead of a file static data.
Reviewers: wmi, davidxl, danielcdh
Subscribers: mehdi_amini, inglorion, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65848
llvm-svn: 368596
Instead of matching value and then blindly casting to BinaryOperator
just to get the opcode, just match instruction and do no cast.
Fixes https://bugs.llvm.org/show_bug.cgi?id=42962
llvm-svn: 368554
Summary:
Hoisting/sinking instruction out of a loop isn't always beneficial. Hoisting an instruction from a cold block inside a loop body out of the loop could hurt performance. This change makes Loop ICM profile aware - it now checks block frequency to make sure hoisting/sinking anly moves instruction to colder block.
Test Plan:
ninja check
Reviewers: asbirlea, sanjoy, reames, nikic, hfinkel, vsk
Reviewed By: asbirlea
Subscribers: fhahn, vsk, davidxl, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65060
llvm-svn: 368526
If one of the values being shifted is a constant, since the new shift
amount is known-constant, the new shift will end up being constant-folded
so, we don't need that one-use restriction then.
llvm-svn: 368519
That one-use restriction is not needed for correctness - we have already
ensured that one of the shifts will go away, so we know we won't increase
the instruction count. So there is no need for that restriction.
llvm-svn: 368518
This is an extension of a transform that tries to produce positive floating-point
constants to improve canonicalization (and hopefully lead to more reassociation
and CSE).
The original patches were:
D4904
D5363 (rL221721)
But as the test diffs show, these were limited to basic patterns by walking from
an instruction to its single user rather than recursively moving up the def-use
sequence. No fast-math is required here because we're only rearranging implicit
FP negations in intermediate ops.
A motivating bug is:
https://bugs.llvm.org/show_bug.cgi?id=32939
Differential Revision: https://reviews.llvm.org/D65954
llvm-svn: 368512
The default behavior of Clang's indirect function call checker will replace
the address of each CFI-checked function in the output file's symbol table
with the address of a jump table entry which will pass CFI checks. We refer
to this as making the jump table `canonical`. This property allows code that
was not compiled with ``-fsanitize=cfi-icall`` to take a CFI-valid address
of a function, but it comes with a couple of caveats that are especially
relevant for users of cross-DSO CFI:
- There is a performance and code size overhead associated with each
exported function, because each such function must have an associated
jump table entry, which must be emitted even in the common case where the
function is never address-taken anywhere in the program, and must be used
even for direct calls between DSOs, in addition to the PLT overhead.
- There is no good way to take a CFI-valid address of a function written in
assembly or a language not supported by Clang. The reason is that the code
generator would need to insert a jump table in order to form a CFI-valid
address for assembly functions, but there is no way in general for the
code generator to determine the language of the function. This may be
possible with LTO in the intra-DSO case, but in the cross-DSO case the only
information available is the function declaration. One possible solution
is to add a C wrapper for each assembly function, but these wrappers can
present a significant maintenance burden for heavy users of assembly in
addition to adding runtime overhead.
For these reasons, we provide the option of making the jump table non-canonical
with the flag ``-fno-sanitize-cfi-canonical-jump-tables``. When the jump
table is made non-canonical, symbol table entries point directly to the
function body. Any instances of a function's address being taken in C will
be replaced with a jump table address.
This scheme does have its own caveats, however. It does end up breaking
function address equality more aggressively than the default behavior,
especially in cross-DSO mode which normally preserves function address
equality entirely.
Furthermore, it is occasionally necessary for code not compiled with
``-fsanitize=cfi-icall`` to take a function address that is valid
for CFI. For example, this is necessary when a function's address
is taken by assembly code and then called by CFI-checking C code. The
``__attribute__((cfi_jump_table_canonical))`` attribute may be used to make
the jump table entry of a specific function canonical so that the external
code will end up taking a address for the function that will pass CFI checks.
Fixes PR41972.
Differential Revision: https://reviews.llvm.org/D65629
llvm-svn: 368495
Refactor `LibCallSimplifier::optimizeExp2()` to use the new
`emitBinaryFloatFnCall()` version that fetches the function name from TLI.
llvm-svn: 368457
Summary:
Make sure that we report that changes has been made
by InstSimplify also in situations when only trivially
dead instructions has been removed. If for example a call
is removed the call graph must be updated.
Bug seem to have been introduced by llvm-svn r367173
(commit 02b9e45a7e), since the code in question
was rewritten in that commit.
Reviewers: spatel, chandlerc, foad
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65973
llvm-svn: 368401
GlobalAlias and GlobalIFunc ought to be treated the same by the IR
linker, so we can generalize the code to be in terms of their common
base class GlobalIndirectSymbol.
Differential Revision: https://reviews.llvm.org/D55046
llvm-svn: 368357
For some targets the LICM pass can result in sub-optimal code in some
cases where it would be better not to run the pass, but it isn't
always possible to suppress the transformations heuristically.
Where the front-end has insight into such cases it is beneficial
to attach loop metadata to disable the pass - this change adds the
llvm.licm.disable metadata to enable that.
Differential Revision: https://reviews.llvm.org/D64557
llvm-svn: 368296
Summary:
The ever growing switch required Attribute::AttrKind values but they
might not be available for all abstract attributes we deduce. With the
new method we track statistics at the abstract attribute level. The
provided macros simplify the usage and make the messages uniform.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65732
llvm-svn: 368227
Summary:
The wrapper reduces boilerplate code and also provide a nice way to
determine the state type used by an abstract attributes statically via
AAType::StateType.
This was already discussed as part of the review of D65711.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65786
llvm-svn: 368224
If we know everything is live there is no need to query for liveness.
Indicating a pessimistic fixpoint will cause the state to be "invalid"
which will cause the Attributor to not return the AAIsDead on request,
which will prevent us from querying isAssumedDead().
llvm-svn: 368223
Summary:
So far, whenever one wants to look at returned values, one had to deal
with the AAReturnedValues and potentially with the AAIsDead attribute.
In the same spirit as other checkForAllXXX methods, we add this
functionality now to the Attributor. By adopting the use sites we got
better results when return instructions were dead.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65733
llvm-svn: 368222
If we know the trip count, we should make sure the interleave factor won't cause the vectorized loop to exceed it.
Improves one of the cases from PR42674
Differential Revision: https://reviews.llvm.org/D65896
llvm-svn: 368215
Summary:
In SimplifySelectsFeedingBinaryOp, propagate fast math flags from the
outer op into both arms of the new select, to take advantage of
simplifications that require fast math flags.
Reviewers: mcberg2017, majnemer, spatel, arsenm, xbolva00
Subscribers: wdng, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65658
llvm-svn: 368175
This was initially committed in r368059 but got reverted in r368084
because there was a faulty logic in how the shift amounts type mismatch
was being handled (it simply wasn't).
I've added an explicit bailout before we SimplifyAddInst() - i don't think
it's designed in general to handle differently-typed values, even though
the actual problem only comes from ConstantExpr's.
I have also changed the common type deduction, to not just blindly
look past zext, but try to do that so that in the end types match.
Differential Revision: https://reviews.llvm.org/D65380
llvm-svn: 368141
Globals are instrumented by adding a pointer tag to their symbol values
and emitting metadata into a special section that allows the runtime to tag
their memory when the library is loaded.
Due to order of initialization issues explained in more detail in the comments,
shadow initialization cannot happen during regular global initialization.
Instead, the location of the global section is marked using an ELF note,
and we require libc support for calling a function provided by the HWASAN
runtime when libraries are loaded and unloaded.
Based on ideas discussed with @evgeny777 in D56672.
Differential Revision: https://reviews.llvm.org/D65770
llvm-svn: 368102
Summary:
This change gives Emscripten the ability to use more than one constructor
priorities that runs before ASan. By convention, constructor priorites 0-100
are reserved for use by the system. ASan on Emscripten now uses priority 50,
leaving plenty of room for use by Emscripten before and after ASan.
This change is done in response to:
https://github.com/emscripten-core/emscripten/pull/9076#discussion_r310323723
Reviewers: kripken, tlively, aheejin
Reviewed By: tlively
Subscribers: cfe-commits, dschuff, sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D65684
llvm-svn: 368101
This reverts r368059 (git commit 0f95710976)
This caused Clang to assert while self-hosting and compiling
SystemZInstrInfo.cpp. Reduction is running.
llvm-svn: 368084
Commit r368064 was necessary after r367953 (D65712) broke the module
build. That happened, apparently, because the template class IRAttribute
defined in the header had a virtual method defined in the corresponding
source file (IRAttribute::manifest). To unbreak the situation this patch
introduces a helper function IRAttributeManifest::manifestAttrs which
is used to implement IRAttribute::manifest in the header. The deifnition
of the helper function is still in the source file.
Patch by jdoerfert (Johannes Doerfert)
Differential Revision: https://reviews.llvm.org/D65821
llvm-svn: 368076
Summary:
Currently `reassociateShiftAmtsOfTwoSameDirectionShifts()` only handles
two shifts one after another. If the shifts are `shl`, we still can
easily perform the fold, with no extra legality checks:
https://rise4fun.com/Alive/OQbM
If we have right-shift however, we won't be able to make it
any simpler than it already is.
After this the only thing missing here is constant-folding: (`NewShAmt >= bitwidth(X)`)
* If it's a logical shift, then constant-fold to `0` (not `undef`)
* If it's a `ashr`, then a splat of original signbit
https://rise4fun.com/Alive/E1Khttps://rise4fun.com/Alive/i0V
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65380
llvm-svn: 368059
D62198 introduced an option to relax the checks for
hasOnlyUniformBranches. This commit turns the option on by default, for
better code generation in some cases in AMDGPU.
Differential Revision: https://reviews.llvm.org/D63198
Change-Id: I9cbff002a1e74d3b7eb96b4192dc8129936d537d
llvm-svn: 368042
Summary:
Similar to `Attributor::checkForAllCallSites`, we now provide such
functionality for instructions of a certain opcode through
`Attributor::checkForAllInstructions` and the convenient wrapper
`Attributor::checkForAllCallLikeInstructions`. This cleans up code,
avoids duplication, and simplifies the usage of liveness information.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65731
llvm-svn: 367961
Summary:
Certain properties, e.g., an AttrKind, are not shared among all abstract
attributes. This patch extracts the functionality into a helper struct.
Reviewers: uenoku, sstefan1
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65712
llvm-svn: 367953
To remove boilerplate, mostly passing through values to the
AbstractAttriubute base class, we extract the state into an IRPosition
helper. There is no function change intended but the IRPosition struct
will provide more functionality down the line.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65711
llvm-svn: 367952
