This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
This is a NFC patch for D77319. The idea is to hide the getNegatibleCost inside the getNegatedExpression()
to have it return null if the cost is expensive, and add some helper function for easy to use. And
rename the old getNegatedExpression to negateExpression to avoid the semantic conflict.
Reviewed By: RKSimon
Differential revision: https://reviews.llvm.org/D78291
This is a minor NFC change to make the code more clear. We have the NegatibleCost that
has cheaper, neutral, and expensive. Typically, the smaller one means the less cost.
It is inverse for current implementation, which makes following code not easy to read.
If (CostX > CostY) negate(X)
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D77993
Summary:
There are at least three clients for KnownBits calculations:
ValueTracking, SelectionDAG and GlobalISel. To reduce duplication the
common logic should be moved out of these clients and into KnownBits
itself.
This patch does this for AND, OR and XOR calculations by implementing
and using appropriate operator overloads KnownBits::operator& etc.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74060
This removes a call to getScalarType from a bunch of call sites.
It also makes the behavior consistent with SIGN_EXTEND_INREG.
Differential Revision: https://reviews.llvm.org/D77631
I think we can save the MRI argument from these since it's in
GISelKnownBits already, but currently not accessible.
Implementation deferred to avoid dependency on other patches.
ISD::ROTL/ROTR rotation values are guaranteed to act as a modulo amount, so for power-of-2 bitwidths we only need the lowest bits.
Differential Revision: https://reviews.llvm.org/D76201
PowerPC hits an assertion due to somewhat the same reason as https://reviews.llvm.org/D70975.
Though there are already some hack, it still failed with some case, when the operand 0 is NOT
a const fp, it is another fma that with const fp. And that const fp is negated which result in multi-uses.
A better fix is to check the uses of the negated const fp. If there are already use of its negated
value, we will have benefit as no extra Node is added.
Differential revision: https://reviews.llvm.org/D75501
I expect that the isCondCodeLegal checks should match that CC of
the node that we're going to create.
Rewriting to a switch to minimize repeated mentions of the same
constants.
We can only report the knownbits for a SCALAR_TO_VECTOR node if we only demand the 0'th element - the upper elements are undefined and shouldn't be trusted.
This is causing a number of regressions that need addressing but we need to get the bugfix in first.
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
Use the SelectionDAG::getValidShiftAmountConstant helper to get const/constsplat shift amounts, which allows us to drop the out of range shift amount early-out.
First step towards better non-uniform shift amount support in SimplifyDemandedBits.
Summary:
This was a very odd API, where you had to pass a flag into a zext
function to say whether the extended bits really were zero or not. All
callers passed in a literal true or false.
I think it's much clearer to make the function name reflect the
operation being performed on the value we're tracking (rather than on
the KnownBits Zero and One fields), so zext means the value is being
zero extended and new function anyext means the value is being extended
with unknown bits.
NFC.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74482
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
Summary: This patch introduces an API for MemOp in order to simplify and tighten the client code.
Reviewers: courbet
Subscribers: arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73964
We have to be careful in SimplifyDemandedBits with loads in case we attempt to combine back to a constant (which then gets turned into a constant pool load again), but we can at least set the upper KnownBits for a ZEXTLoad to zero.
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::INSERT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
Differential Revision: This allows SimplifyDemandedBits to call SimplifyMultipleUseDemandedBits to create a simpler ISD::EXTRACT_SUBVECTOR, which is particularly useful for cases where we're splitting into subvectors anyhow.
This was moved in October 2018, but we don't appear to be using
this for vectors on any in tree target.
Moving it back simplifies D72794 so we can share the code for i32->f32.
Summary:
This always just used the same libcall as unordered, but the comparison predicate was different. This change appears to have been made when targets were given the ability to override the predicates. Before that they were hardcoded into the type legalizer. At that time we never inverted predicates and we handled ugt/ult/uge/ule compares by emitting an unordered check ORed with a ogt/olt/oge/ole checks. So only ordered needed an inverted predicate. Later ugt/ult/uge/ule were optimized to only call a single libcall and invert the compare.
This patch removes the ordered entries and just uses the inverting logic that is now present. This removes some odd things in both the Mips and WebAssembly code.
Reviewers: efriedma, ABataev, uweigand, cameron.mcinally, kpn
Reviewed By: efriedma
Subscribers: dschuff, sdardis, sbc100, arichardson, jgravelle-google, kristof.beyls, hiraditya, aheejin, sunfish, atanasyan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72536
ONE is currently softened to OGT | OLT. But the libcalls for OGT and OLT libcalls will trigger an exception for QNAN. At least for X86 with libgcc. UEQ on the other hand uses UO | OEQ. The UO and OEQ libcalls will not trigger an exception for QNAN.
This patch changes ONE to use the inverse of the UEQ lowering. So we now produce O & UNE. Technically the existing behavior was correct for a signalling ONE, but since I don't know how to generate one of those from clang that seemed like something we can deal with later as we would need to fix other predicates as well. Also removing spurious exceptions seemed better than missing an exception.
There are also problems with quiet OGT/OLT/OLE/OGE, but those are harder to fix.
Differential Revision: https://reviews.llvm.org/D72477
If we're doing a compare that only tests the sign bit and only the sign bit is demanded, we can just bypass the node. This removes one of the blend dependencies in our v2i64->v2f32 uint_to_fp codegen on pre-sse4.2 targets.
Differential Revision: https://reviews.llvm.org/D72356
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
This isn't a functonal change since we also check the bit width is the
same and the input type is integer. This guarantees the input and
output type are the same. But passing the input type makes the code
more readable.
Previously, for vectors we created a vselect with a condition that
didn't match what the target wanted according to getSetCCResultType.
To make up for this, X86 had a special DAG combine to detect if
the condition was all sign bits and then insert its own truncate
or extend. By adding the extend/truncate here explicitly we can
avoid that.
