The FixSGPRCopies pass converts instructions to VALU when
removing illegal VGPR to SGPR copies. Instructions that use SCC
are changed to use VCC instead. When that happens, the pass must
also change instructions that define SCC to define VCC.
The pass was not changing the SCC definition when an ADDC is
converted due to a input that is a VGPR to SGPR copy. But, the
initial ADD insruction, which define SCC, is not converted.
This causes a compilation failure due to a use of an undefined
physical register.
This patch adds code that inserts the SCC definition in the
MoveToVALU worklist when a SCC use is converted to a VCC use.
Differential Revision: https://reviews.llvm.org/D102111
moveOperands does not handle moving tied operands since it would
generally have to fixup the tied operand references. Avoid the assert
by untying and retying after the modification. These in place
modifications really aren't managable.
A consequence is that checkInstOffsetsDoNotOverlap can now distinguish
sp+offset from fp+offset, so it knows that it shouldn't try to work out
whether the accesses overlap just by comparing the offsets. For example
in these two instructions:
MIR:
BUFFER_STORE_DWORD_OFFSET %0:vgpr_32(s32), $sgpr0_sgpr1_sgpr2_sgpr3, $sgpr32, 4, 0, 0, 0, 0, 0, implicit $exec :: (dereferenceable store 4 into stack + 4, addrspace 5)
%4:vgpr_32 = BUFFER_LOAD_DWORD_OFFEN %stack.0.alloca, $sgpr0_sgpr1_sgpr2_sgpr3, $sgpr32, 0, 0, 0, 0, 0, 0, implicit $exec :: (load 4 from `i8 addrspace(5)* undef`, addrspace 5)
ISA:
buffer_store_dword v0, off, s[0:3], s32 offset:4
buffer_load_dword v0, off, s[0:3], s34
Differential Revision: https://reviews.llvm.org/D73957
A16 support for image instructions assembly/disassembly (gfx10) was missing
Also refactor MIMG op addr size calcs to common function
We'd got 3 places where the same operation was being done.
One test is now marked XFAIL until a related codegen patch is in place
Differential Revision: https://reviews.llvm.org/D102231
Change-Id: I7e86e730ef8c71901457855cba570581f4f576bb
gfx9 does not work with negative offsets, gfx10 works only with
aligned negative offsets, but not with unaligned negative offsets.
This is slightly more conservative than needed, gfx9 does support
negative offsets when a VGPR address is used and gfx10 supports
negative, unaligned offsets when an SGPR address is used, but we
do not make use of that with this patch.
Differential Revision: https://reviews.llvm.org/D101292
Extend the legalization of global SADDR loads and stores
with changing to VADDR to the FLAT scratch instructions.
Differential Revision: https://reviews.llvm.org/D101408
Instead of legalizing saddr operand with a readfirstlane
when address is moved from SGPR to VGPR we can just
change the opcode.
Differential Revision: https://reviews.llvm.org/D101405
In GFX10 VOP3 can have a literal, which opens up the possibility of two
operands using the same literal value, which is allowed and only counts
as one use of the constant bus.
AMDGPUAsmParser::validateConstantBusLimitations already knew about this
but SIInstrInfo::verifyInstruction did not.
Differential Revision: https://reviews.llvm.org/D100770
Use SIInstrFlags to differentiate between the different
variants of flat instructions (flat, global and scratch).
This should make it easier to bundle the immediate offset logic in a
single place and implement restrictions and bug workarounds.
Fixed version of D99587, which does not rely on the address space.
Differential Revision: https://reviews.llvm.org/D99743
RA can insert something like a sub1_sub2 COPY of a wide VGPR
tuple which results in the unaligned acces with v_pk_mov_b32
after the copy is expanded. This is regression after D97316.
Differential Revision: https://reviews.llvm.org/D98549
Replace individual operands GLC, SLC, and DLC with a single cache_policy
bitmask operand. This will reduce the number of operands in MIR and I hope
the amount of code. These operands are mostly 0 anyway.
Additional advantage that parser will accept these flags in any order unlike
now.
Differential Revision: https://reviews.llvm.org/D96469
D57708 changed SIInstrInfo::isReallyTriviallyReMaterializable to reject
V_MOVs with extra implicit operands, but it accidentally rejected all
V_MOVs because of their implicit use of exec. Fix it but avoid adding a
moderately expensive call to MI.getDesc().getNumImplicitUses().
In real graphics shaders this changes quite a few vgpr copies into move-
immediates, which is good for avoiding stalls on GFX10.
Differential Revision: https://reviews.llvm.org/D98347
This is already deprecated, so remove code working on this.
Also update the tests by using S_CBRANCH_EXECZ instead of SI_MASK_BRANCH.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D97545
* Add amdgcn_strict_wqm intrinsic.
* Add a corresponding STRICT_WQM machine instruction.
* The semantic is similar to amdgcn_strict_wwm with a notable difference that not all threads will be forcibly enabled during the computations of the intrinsic's argument, but only all threads in quads that have at least one thread active.
* The difference between amdgc_wqm and amdgcn_strict_wqm, is that in the strict mode an inactive lane will always be enabled irrespective of control flow decisions.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96258
* Introduce the new intrinsic amdgcn_strict_wwm
* Deprecate the old intrinsic amdgcn_wwm
The change is done for consistency as the "strict"
prefix will become an important, distinguishing factor
between amdgcn_wqm and amdgcn_strictwqm in the future.
The "strict" prefix indicates that inactive lanes do not
take part in control flow, specifically an inactive lane
enabled by a strict mode will always be enabled irrespective
of control flow decisions.
The amdgcn_wwm will be removed, but doing so in two steps
gives users time to switch to the new name at their own pace.
Reviewed By: critson
Differential Revision: https://reviews.llvm.org/D96257
gfx90a operations require even aligned registers, but this was
previously achieved by reserving registers inside the full class.
Ideally this would be captured in the static instruction definitions
for the operands, and we would have different instructions per
subtarget. The hackiest part of this is we need to manually reassign
AGPR register classes after instruction selection (we get away without
this for VGPRs since those types are actually registered for legal
types).
* Update skip-if-dead.ll with tests for wave32.
* Fix the crash in verifier in one newly enabled test by adding
missing fixImplicitOperands in branch insertion code.
```
*** Bad machine code: Using an undefined physical register ***
- function: test_kill_divergent_loop
- basic block: %bb.2 bb (0xad96308)
- instruction: S_CBRANCH_VCCNZ %bb.1, implicit $vcc_lo
- operand 1: implicit $vcc_lo
LLVM ERROR: Found 1 machine code errors.
```
* Simplify "cbranch_kill" to not use interp instructions.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D96793
Move implementation of kill intrinsics to WQM pass. Add live lane
tracking by updating a stored exec mask when lanes are killed.
Use live lane tracking to enable early termination of shader
at any point in control flow.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D94746
V_SET_INACTIVE is implemented with S_NOT which clobbers SCC.
Mark sure it is marked appropriately.
Reviewed By: piotr
Differential Revision: https://reviews.llvm.org/D95509
Previously, instructions which could be
expressed as VOP3 in addition to another
encoding had a _e64 suffix on the tablegen
record name, while those
only available as VOP3 did not. With this
patch, all VOP3s will have the _e64 suffix.
The assembly does not change, only the mir.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D94341
Change-Id: Ia8ec8890d47f8f94bbbdac43745b4e9dd2b03423
In ST mode, flat scratch instructions have neither an sgpr nor a vgpr
for the address. This lead to an assertion when inserting hard clauses.
Differential Revision: https://reviews.llvm.org/D94406
It is possible for copies or spills to be inserted in the middle of indirect
addressing sequences which use VGPR indexing. Spills to accvgprs could be
effected by the indexing mode.
Add new pseudo instructions that are expanded after register allocation to avoid
the problematic spill or copy placement.
Differential Revision: https://reviews.llvm.org/D91048
Add a calling convention called amdgpu_gfx for real function calls
within graphics shaders. For the moment, this uses the same calling
convention as other calls in amdgpu, with registers excluded for return
address, stack pointer and stack buffer descriptor.
Differential Revision: https://reviews.llvm.org/D88540
The insertion of waterfall loops splits the current basic block into
three blocks. So the basic block that we iterate over must be updated.
This failed assert(!NodePtr->isKnownSentinel()) in ilist_iterator for
divergent calls in branches before.
Differential Revision: https://reviews.llvm.org/D90596
This reverts r227987 "R600/SI: Determine target-specific encoding of READLANE and WRITELANE early v2".
All the codegen changes are caused by the post-RA scheduler no longer
treating readlane/writelane as scheduling barriers due to having
unmodelled side effects. (The pseudos are hasSideEffects = 0, but the
real instructions are hasSideEffects = ? which TableGen conservatively
treats as 1.)
Differential Revision: https://reviews.llvm.org/D90401
V_DIV_SCALE_F32/F64 are VOP3B encoded so they can't use the ABS src
modifier, but they can still use NEG and the usual output modifiers.
This partially reverts 3b99f12a4e "AMDGPU: Remove modifiers from v_div_scale_*".
Differential Revision: https://reviews.llvm.org/D90296
This does not change anything at the moment, but needed for
D89170. In that change I am probing a physical SGPR to see if
it is legal. RC is SReg_32, but DRC for scratch instructions
is SReg_32_XEXEC_HI and test fails.
That is sufficient just to check if DRC contains a register
here in case of physreg. Physregs also do not use subregs
so the subreg handling below is irrelevant for these.
Differential Revision: https://reviews.llvm.org/D90064
I was wrong in thinking that MRI.use_instructions return unique instructions and mislead Jay in his previous patch D64393.
First loop counted more instructions than it was in reality and the second loop went beyond the basic block with that counter.
I used Jay's previous code that relied on MRI.use_operands to constrain the number of instructions to check among.
modifiesRegister is inlined to reduce the number of passes over instruction operands and added assert on BB end boundary.
Differential Revision: https://reviews.llvm.org/D89386
If a target can encode multiple wait-states into a noop allow emitting such
instructions directly.
Reviewed By: rampitec, dmgreen
Differential Revision: https://reviews.llvm.org/D89753
This would end up killing part of the result super-register, resulting
in a verifier error on a later use of the overlapping registers. We
could add kills of any non-aliasing registers, but we should be moving
away from relying on kill flags.
Generate the minimal set of s_mov instructions required when
expanding a SGPR copy operation in copyPhysReg.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D89187
This can fix an asan failure like below.
==15856==ERROR: AddressSanitizer: use-after-poison on address ...
READ of size 8 at 0x6210001a3cb0 thread T0
#0 llvm::MachineInstr::getParent()
#1 llvm::LiveVariables::VarInfo::findKill()
#2 TwoAddressInstructionPass::rescheduleMIBelowKill()
#3 TwoAddressInstructionPass::tryInstructionTransform()
#4 TwoAddressInstructionPass::runOnMachineFunction()
We need to update the Kills if we replace instructions. The Kills
may be later accessed within TwoAddressInstruction pass.
Differential Revision: https://reviews.llvm.org/D89092
