Summary:
(This is a second attempt as https://reviews.llvm.org/D34822 was reverted.)
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: sanjoy
Reviewed By: sanjoy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36247
llvm-svn: 309986
Summary:
Peeling should not occur during the full unrolling invocation early
in the pipeline, but rather later with partial and runtime loop
unrolling. The later loop unrolling invocation will also eventually
utilize profile summary and branch frequency information, which
we would like to use to control peeling. And for ThinLTO we want
to delay peeling until the backend (post thin link) phase, just as
we do for most types of unrolling.
Ensure peeling doesn't occur during the full unrolling invocation
by adding a parameter to the shared implementation function, similar
to the way partial and runtime loop unrolling are disabled.
Performance results for ThinLTO suggest this has a neutral to positive
effect on some internal benchmarks.
Reviewers: chandlerc, davidxl
Subscribers: mzolotukhin, llvm-commits, mehdi_amini
Differential Revision: https://reviews.llvm.org/D36258
llvm-svn: 309966
Summary:
This is largely NFC*, in preparation for utilizing ProfileSummaryInfo
and BranchFrequencyInfo analyses. In this patch I am only doing the
splitting for the New PM, but I can do the same for the legacy PM as
a follow-on if this looks good.
*Not NFC since for partial unrolling we lose the updates done to the
loop traversal (adding new sibling and child loops) - according to
Chandler this is not very useful for partial unrolling, but it also
means that the debugging flag -unroll-revisit-child-loops no longer
works for partial unrolling.
Reviewers: chandlerc
Subscribers: mehdi_amini, mzolotukhin, eraman, llvm-commits
Differential Revision: https://reviews.llvm.org/D36157
llvm-svn: 309886
This adds support for sext in foldLogicCastConstant. This is a prerequisite for D36214.
Differential Revision: https://reviews.llvm.org/D36234
llvm-svn: 309880
Summary:
This patch makes LoopDeletion use the incremental DominatorTree API.
We modify LoopDeletion to perform the deletion in 5 steps:
1. Create a new dummy edge from the preheader to the exit, by adding a conditional branch.
2. Inform the DomTree about the new edge.
3. Remove the conditional branch and replace it with an unconditional edge to the exit. This removes the edge to the loop header, making it unreachable.
4. Inform the DomTree about the deleted edge.
5. Remove the unreachable block from the function.
Creating the dummy conditional branch is necessary to perform incremental DomTree update.
We should consider using the batch updater when it's ready.
Reviewers: dberlin, davide, grosser, sanjoy
Reviewed By: dberlin, grosser
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35391
llvm-svn: 309850
Summary:
Currently most of the time vectors of extractelement instructions are
treated as scalars that must be gathered into vectors. But in some
cases, like when we have extractelement instructions from single vector
with different constant indeces or from 2 vectors of the same size, we
can treat this operations as shuffle of a single vector or blending of 2
vectors.
```
define <2 x i8> @g(<2 x i8> %x, <2 x i8> %y) {
%x0 = extractelement <2 x i8> %x, i32 0
%y1 = extractelement <2 x i8> %y, i32 1
%x0x0 = mul i8 %x0, %x0
%y1y1 = mul i8 %y1, %y1
%ins1 = insertelement <2 x i8> undef, i8 %x0x0, i32 0
%ins2 = insertelement <2 x i8> %ins1, i8 %y1y1, i32 1
ret <2 x i8> %ins2
}
```
can be converted to something like
```
define <2 x i8> @g(<2 x i8> %x, <2 x i8> %y) {
%1 = shufflevector <2 x i8> %x, <2 x i8> %y, <2 x i32> <i32 0, i32 3>
%2 = mul <2 x i8> %1, %1
ret <2 x i8> %2
}
```
Currently this type of conversion is considered as high cost
transformation.
Reviewers: mzolotukhin, delena, mkuper, hfinkel, RKSimon
Subscribers: ashahid, RKSimon, spatel, llvm-commits
Differential Revision: https://reviews.llvm.org/D30200
llvm-svn: 309812
When the 'and' test was originally added it was intended to make sure we didn't change it to a sext of and of cmp. But since then the test was changed to expect it to be turned into 'select cmp1, sext cmp2, 0'. Then another optimization was added to turn the select into 'sext (and cmp1, cmp2)' which is exactly the transformation that was being blocked when the test case started.
Looks like 'or' gets optimized in a similar way, but not 'xor'.
llvm-svn: 309793
infinite-inlining across multiple runs of the inliner by keeping a tiny
history of internal-to-SCC inlining decisions.
This is still a bit gross, but I don't yet have any fundamentally better
ideas and numerous people are blocked on this to use new PM and ThinLTO
together.
The core of the idea is to detect when we are about to do an inline that
has a chance of re-splitting an SCC which we have split before with
a similar inlining step. That is a critical component in the inlining
forming a cycle and so far detects all of the various cyclic patterns
I can come up with as well as the original real-world test case (which
comes from a ThinLTO build of libunwind).
I've added some tests that I think really demonstrate what is going on
here. They are essentially state machines that march the inliner through
various steps of a cycle and check that we stop when the cycle is closed
and that we actually did do inlining to form that cycle.
A lot of thanks go to Eric Christopher and Sanjoy Das for the help
understanding this issue and improving the test cases.
The biggest "yuck" here is the layering issue -- the CGSCC pass manager
is providing somewhat magical state to the inliner for it to use to make
itself converge. This isn't great, but I don't honestly have a lot of
better ideas yet and at least seems nicely isolated.
I have tested this patch, and it doesn't block *any* inlining on the
entire LLVM test suite and SPEC, so it seems sufficiently narrowly
targeted to the issue at hand.
We have come up with hypothetical issues that this patch doesn't cover,
but so far none of them are practical and we don't have a viable
solution yet that covers the hypothetical stuff, so proceeding here in
the interim. Definitely an area that we will be back and revisiting in
the future.
Differential Revision: https://reviews.llvm.org/D36188
llvm-svn: 309784
If SCEV can prove that the backedge taken count for a loop is zero, it does not
need to "understand" a recursive PHI to compute its exiting value.
This should fix PR33885.
llvm-svn: 309758
This causes assertion failures in (a somewhat old version of) SpiderMonkey.
I have already forwarded reproduction instructions to the patch author.
llvm-svn: 309659
To the best of my knowledge -metarenamer is used in two cases:
1) obfuscate names, when e.g. they contain informations that
can't be shared.
2) Improve clarity of the textual IR for testcases.
One of the usecases if getting the output of `opt` and passing it
to the lli interpreter to run the test. If metarenamer renames
@main, lli can't find an entry point.
llvm-svn: 309657
D33925 added a control flow simplification for -O2 --lto-O0 builds that
manually splits blocks and reassigns conditional branches but does not
correctly update phi nodes. If the else case being branched to had
incoming phi nodes the control-flow simplification would leave phi nodes
in that BB with an unhandled predecessor.
Patch by Vlad Tsyrklevich!
Differential Revision: https://reviews.llvm.org/D36012
llvm-svn: 309621
This intrinsic clears the upper bits starting at a specified index. If the index is a constant we can do some simplifications.
This could be in InstSimplify, but we don't handle any target specific intrinsics there today.
Differential Revision: https://reviews.llvm.org/D36069
llvm-svn: 309604
This patch adds simplification support for the BEXTR/BEXTRI intrinsics to match gcc. This only supports cases that fold to 0 or can be fully constant folded. Theoretically we could support converting to AND if the shift part is unused or to only a shift if the mask doesn't modify any bits after an equivalent shl. gcc doesn't do these transformations either.
I put this in InstCombine, but it could be done in InstSimplify. It would be the first target specific intrinsic in InstSimplify.
Differential Revision: https://reviews.llvm.org/D36063
llvm-svn: 309603
As noted in the code comment, transforming this in the other direction might require
a separate transform here in CGP given the block-at-a-time DAG constraint.
Besides that theoretical motivation, there are 2 practical motivations for the
subtract-of-cmps form:
1. The codegen for both x86 and PPC is better for this IR (though PPC could be better still).
There is discussion about canonicalizing IR to the select form
( http://lists.llvm.org/pipermail/llvm-dev/2017-July/114885.html ),
so we probably need to add DAG transforms for those patterns anyway, but this improves the
memcmp output without waiting for that step.
2. If we allow vector-sized chunks for the load and compare, x86 is better prepared to convert
that to optimal code when using subtract-of-cmps, so another prerequisite patch is avoided
if we choose to enable that.
Differential Revision: https://reviews.llvm.org/D34904
llvm-svn: 309597
The Loop Vectorizer generates redundant operations when manipulating masks:
AND with true, OR with false, compare equal to true. Instead of relying on
a subsequent pass to clean them up, this patch avoids generating them.
Use null (no-mask) to represent all-one full masks, instead of a constant
all-one vector, following the convention of masked gathers and scatters.
Preparing for a follow-up VPlan patch in which these mask manipulating
operations are modeled using recipes.
Differential Revision: https://reviews.llvm.org/D35725
llvm-svn: 309558
Summary:
Without any information about the called function, we cannot be sure
that it is safe to interchange loops which contain function calls. For
example there could be dependences that prevent interchanging between
accesses in the called function and the loops. Even functions without any
parameters could cause problems, as they could access memory using
global pointers.
For now, I think it is only safe to interchange loops with calls marked
as readnone.
With this patch, the LLVM test suite passes with `-O3 -mllvm
-enable-loopinterchange` and LoopInterchangeProfitability::isProfitable
returning true for all loops. check-llvm and check-clang also pass when
bootstrapped in a similar fashion, although only 3 loops got
interchanged.
Reviewers: karthikthecool, blitz.opensource, hfinkel, mcrosier, mkuper
Reviewed By: mcrosier
Subscribers: mzolotukhin, llvm-commits
Differential Revision: https://reviews.llvm.org/D35489
llvm-svn: 309547
move test/Transforms/SimplifyCFG/disable-lookup-table.ll into test/Transforms/SimplifyCFG/X86/disable-lookup-table.ll to avoid test failure when X86 backend is not enabled
llvm-svn: 309487
Summary:
Inlining threshold is increased by application of bonuses when the
callee has a single reachable basic block or is rich in vector
instructions. Similarly, inlining cost is reduced by applying a large
bonus when the last call to a static function is considered for
inlining. This patch disables the application of these bonuses when the
callsite or the callee is cold. The intention here is to prevent a large
cold callsite from being inlined to a non-cold caller that could prevent
the caller from being inlined. This is especially important when the
cold callsite is a last call to a static since the associated bonus is
very high.
Reviewers: chandlerc, davidxl
Subscribers: danielcdh, llvm-commits
Differential Revision: https://reviews.llvm.org/D35823
llvm-svn: 309441
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
Summary:
LazyValueInfo currently computes the constant value of the switch condition through case edges, which allows the constant value to be propagated through the case edges.
But we have seen a case where a zero-extended value of the switch condition is used past case edges for which the constant propagation doesn't occur.
This patch adds a small logic to handle such a case in getEdgeValueLocal().
This is motivated by the Python 2.7 eval loop in PyEval_EvalFrameEx() where the lack of the constant propagation causes longer live ranges and more spill code than necessary.
With this patch, we see that the code size of PyEval_EvalFrameEx() decreases by ~5.4% and a performance test improves by ~4.6%.
Reviewers: wmi, dberlin, sanjoy
Reviewed By: sanjoy
Subscribers: davide, davidxl, llvm-commits
Differential Revision: https://reviews.llvm.org/D34822
llvm-svn: 309415
Recommit after workaround the bug PR31652.
Three bugs fixed in previous recommits: The first one is to use CurrentBlock
instead of PREInstr's Parent as param of performScalarPREInsertion because
the Parent of a clone instruction may be uninitialized. The second one is stop
PRE when CurrentBlock to its predecessor is a backedge and an operand of CurInst
is defined inside of CurrentBlock. The same value defined inside of loop in last
iteration can not be regarded as available. The third one is an out-of-bound
array access in a flipped if guard.
Right now scalarpre doesn't have phi-translate support, so it will miss some
simple pre opportunities. Like the following testcase, current scalarpre cannot
recognize the last "a * b" is fully redundent because a and b used by the last
"a * b" expr are both defined by phis.
long a[100], b[100], g1, g2, g3;
__attribute__((pure)) long goo();
void foo(long a, long b, long c, long d) {
g1 = a * b;
if (__builtin_expect(g2 > 3, 0)) {
a = c;
b = d;
g2 = a * b;
}
g3 = a * b; // fully redundant.
}
The patch adds phi-translate support in scalarpre. This is only a temporary
solution before the newpre based on newgvn is available.
Differential Revision: https://reviews.llvm.org/D32252
llvm-svn: 309397
This patch reworks the function that searches constants in Add and Mul SCEV expression
chains so that now it does not visit a node more than once, and also renames this function
for better correspondence between its implementation and semantics.
Differential Revision: https://reviews.llvm.org/D35931
llvm-svn: 309367
JumpThreading claims to preserve LVI, but it doesn't preserve
the analyses which LVI holds a reference to (e.g. the Dominator).
In the current pass manager infrastructure, after JT runs, the
PM frees these analyses (including DominatorTree) but preserves
LVI.
CorrelatedValuePropagation runs immediately after and queries
a corrupted domtree, causing weird miscompiles.
This commit disables the preservation of LVI for the time being.
Eventually, we should either move LVI to a proper dependency
tracking mechanism (i.e. an analyses shouldn't hold references
to other analyses and compute them on demand if needed), or
we should teach all the passes preserving LVI to preserve the
analyses LVI depends on.
The new pass manager has a mechanism to invalidate LVI in case
one of the analyses it depends on becomes invalid, so this problem
shouldn't exist (at least not in this immediate form), but handling
of analyses holding references is still a very delicate subject.
Fixes PR33917 (and rustc).
llvm-svn: 309355
Summary: In the current implementation, isPromotionProfitable only checks if the call count to a direct target is no less than a certain percentage threshold of the remaining call counts that have not been promoted. This causes code size problems when the target count is small but greater than a large portion of remaining counts. E.g. target1 takes 99.9%, while target2 takes 0.1%. Both targets will be promoted and inlined, makes the function size too large, which potentially prevents it from further inlining into its callers. This patch adds another percentage threshold against the total indirect call count. If the target count needs to be no less than both thresholds in order to be promoted speculatively.
Reviewers: davidxl, tejohnson
Reviewed By: tejohnson
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D35962
llvm-svn: 309345
The code in ConstantFoldGetElementPtr() assumes integers, and
therefore it crashes trying to get the integer bidwith of a vector
type (in this case <4 x i32>. I just changed the code to prevent
the folding in case of vectors and I didn't bother to generalize
as this doesn't seem to me something that really happens in
practice, but I'm willing to change the patch if you think
it's worth it.
This is hard to trigger from -instsimplify or -instcombine
only as the second instruction is dead, so the test uses loop-unroll.
Differential Revision: https://reviews.llvm.org/D35956
llvm-svn: 309330
Summary:
Pointer difference simplifications currently happen only if input GEPs don't have other uses or their indexes are all constants, to avoid duplicating indexing arithmetic.
This patch enables cases with exactly one non-constant index among input GEPs to happen where there is no duplicated arithmetic or code size increase even if input GEPs have other uses.
For example, this patch allows "(&A[42][i]-&A[42][0])" --> "i", which didn't happen previously, if the input GEP(s) have other uses.
Reviewers: sanjoy, bkramer
Reviewed By: sanjoy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35499
llvm-svn: 309304
This is a module pass so for the old PM, we can't use ORE, the function
analysis pass. Instead ORE is created on the fly.
A few notes:
- isPromotionLegal is folded in the caller since we want to emit the Function
in the remark but we can only do that if the symbol table look-up succeeded.
- There was good test coverage for remarks in this pass.
- promoteIndirectCall uses ORE conditionally since it's also used from
SampleProfile which does not use ORE yet.
Fixes PR33792.
Differential Revision: https://reviews.llvm.org/D35929
llvm-svn: 309294
Summary:
It is possible for some passes to materialize a call to a libcall (ex: ldexp, exp2, etc),
but these passes will not mark the call as a gc-leaf-function. All libcalls are
actually gc-leaf-functions, so we change llvm::callsGCLeafFunction() to tell us that
available libcalls are equivalent to gc-leaf-function calls.
Reviewers: sanjoy, anna, reames
Reviewed By: anna
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D35840
llvm-svn: 309291
Summary:
Until a more advanced version of importing can be implemented for
aliases (one that imports an alias as an available_externally definition
of the aliasee), skip the narrow subset of cases that was possible but
came at a cost: aliases of linkonce_odr functions could be imported
because the linkonce_odr function could be safely duplicated from the
source module. This came/comes at the cost of not being able to 'home'
imported linkonce functions (they had to be emitted linkonce_odr in all
the destination modules (even if they weren't used by an alias) rather
than as available_externally - causing extra object size).
Tangentially, this also was the only reason ThinLTO would emit multiple
CUs in to the resulting DWARF - which happens to be a problem for
Fission (there's a fix for this in GDB but not released yet, etc).
(actually it's not the only reason - but I'm sending a patch to fix the
other reason shortly)
There's no reason to believe this particularly narrow alias importing
was especially/meaningfully important, only that it was /possible/ to
implement in this way. When a more general solution is done, it should
still satisfy the DWARF concerns above, since the import will still be
available_externally, and thus not create extra CUs.
Since now all aliases are treated the same, I removed/simplified some
test cases since they were testing corner cases where there are no
longer any corners.
Reviewers: tejohnson, mehdi_amini
Differential Revision: https://reviews.llvm.org/D35875
llvm-svn: 309278
Summary:
This changes SimplifyLibCalls to use the new OptimizationRemarkEmitter
API.
In fact, as SimplifyLibCalls is only ever called via InstCombine,
(as far as I can tell) the OptimizationRemarkEmitter is added there,
and then passed through to SimplifyLibCalls later.
I have avoided changing any remark text.
This closes PR33787
Patch by Sam Elliott!
Reviewers: anemet, davide
Reviewed By: anemet
Subscribers: davide, mehdi_amini, eraman, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D35608
llvm-svn: 309158
This patch expands the support of lowerInterleavedStore to 32x8i stride 4.
LLVM creates suboptimal shuffle code-gen for AVX2. In overall, this patch is a specific fix for the pattern (Strid=4 VF=32) and we plan to include more patterns in the future. To reach our goal of "more patterns". We include two mask creators. The first function creates shuffle's mask equivalent to unpacklo/unpackhi instructions. The other creator creates mask equivalent to a concat of two half vectors(high/low).
The patch goal is to optimize the following sequence:
At the end of the computation, we have ymm2, ymm0, ymm12 and ymm3 holding
each 32 chars:
c0, c1, , c31
m0, m1, , m31
y0, y1, , y31
k0, k1, ., k31
And these need to be transposed/interleaved and stored like so:
c0 m0 y0 k0 c1 m1 y1 k1 c2 m2 y2 k2 c3 m3 y3 k3 ....
Reviewers:
dorit
Farhana
RKSimon
guyblank
DavidKreitzer
Differential Revision: https://reviews.llvm.org/D34601
llvm-svn: 309086
This is a workaround for the bug described in PR31652 and
http://lists.llvm.org/pipermail/llvm-dev/2017-July/115497.html. The temporary
solution is to add a function EqualityPropUnSafe. In EqualityPropUnSafe, for
some simple patterns we can know the equality comparison may contains undef,
so we regard such comparison as unsafe and will not do loop-unswitching for
them. We also need to disable the select simplification when one of select
operand is undef and its result feeds into equality comparison.
The patch cannot clear the safety issue caused by the bug, but it can suppress
the issue from happening to some extent.
Differential Revision: https://reviews.llvm.org/D35811
llvm-svn: 309059
