This patch add the ability for the user to set a label for a target.
This can be very useful when debugging targets with the same executables
in the same session.
Labels can be set either at the target creation in the command
interpreter or at any time using the SBAPI.
Target labels show up in the `target list` output, following the target
index, and they also allow the user to switch targets using them.
rdar://105016191
Differential Revision: https://reviews.llvm.org/D151859
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
There are two age fields in a PDB file. One from the PDB Stream and another one
from the DBI stream.
According to https://randomascii.wordpress.com/2011/11/11/source-indexing-is-underused-awesomeness/#comment-34328,
The age in DBI stream is used to against the binary's age. `Pdbstr.exe` is used
to only increment the age from PDB stream without changing the DBI age. I
also verified this by manually changing the DBI age of a PDB file and let
`windbg.exe` to load it. It shows the following logs before and after changing:
Before:
```
SYMSRV: BYINDEX: 0xA
c:\symbols*https://msdl.microsoft.com/download/symbols
nlaapi.pdb
D72AA69CD5ABE5D28C74FADB17DE3F8C1
SYMSRV: PATH: c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
SYMSRV: RESULT: 0x00000000
*** WARNING: Unable to verify checksum for NLAapi.dll
DBGHELP: NLAapi - public symbols
c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
...
```
After:
```
SYMSRV: BYINDEX: 0xA
c:\symbols*https://msdl.microsoft.com/download/symbols
nlaapi.pdb
D72AA69CD5ABE5D28C74FADB17DE3F8C1
SYMSRV: PATH: c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
SYMSRV: RESULT: 0x00000000
DBGHELP: c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb - mismatched pdb
SYMSRV: BYINDEX: 0xB
c:\symbols*https://chromium-browser-symsrv.commondatastorage.googleapis.com
nlaapi.pdb
D72AA69CD5ABE5D28C74FADB17DE3F8C1
SYMSRV: PATH: c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
SYMSRV: RESULT: 0x00000000
DBGHELP: c:\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb - mismatched pdb
SYMSRV: BYINDEX: 0xC
c:\src\symbols*https://msdl.microsoft.com/download/symbols
nlaapi.pdb
D72AA69CD5ABE5D28C74FADB17DE3F8C1
SYMSRV: PATH: c:\src\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
SYMSRV: RESULT: 0x00000000
*** WARNING: Unable to verify checksum for NLAapi.dll
DBGHELP: NLAapi - public symbols
c:\src\symbols\nlaapi.pdb\D72AA69CD5ABE5D28C74FADB17DE3F8C1\nlaapi.pdb
```
So, `windbg.exe` uses the DBI age to detect mismatched pdb, but it still loads
the pdb even if the age mismatched. Probably lldb should do the same and give
some warnings.
This fixes a bug that lldb can't load some windows system pdbs due to mismatched
uuid.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D152189
This allows the LLDB Shell tests to succeed in (e.g. CI) environments where
system libraries are provided hermetically as a sysroot.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D151269
When trying to run an expression after a process has existed, you
currently are shown the following error message:
(lldb) p strlen("")
error: Can't make a function caller while the process is running
This error is wrong and pretty uninformative. After this patch, the
following error message is shown:
(lldb) p strlen("")
error: unable to evaluate expression while the process is exited: the
process must be stopped because the expression might require
allocating memory.
rdar://109731325
Differential revision: https://reviews.llvm.org/D151497
If we use a variable watchpoint with a condition using a scope variable,
if we go out-of-scope, the watpoint remains active which can the
expression evaluator to fail to parse the watchpoint condition (because
of the missing varible bindings).
This was discovered after `watchpoint_callback.test` started failing on
the green dragon bot.
This patch should address that issue by setting an internal breakpoint
on the return addresss of the current frame when creating a variable
watchpoint. The breakpoint has a callback that will disable the watchpoint
if the the breakpoint execution context matches the watchpoint execution
context.
This is only enabled for local variables.
This patch also re-enables the failing test following e1086384e5.
rdar://109574319
Differential Revision: https://reviews.llvm.org/D151366
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
This test started failing on the green-dragon bot, but after some
investigation, it doesn't have anything to do with Lua.
If we use a variable watchpoint with a condition using a scope variable,
if we go out-of-scope, the watpoint remains active which can the
expression evaluator to fail to parse the watchpoint condition (because
of the missing varible bindings).
For now, we should disable this test until we come up with a fix for it.
rdar://109574319
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
Sometimes, crash reports come with inlined symbols. These provide the
exact stacktrace from the user binary.
However, when investigating a crash, it's very likely that the images related
to the crashed thread are not available on the debugging user system or
that the versions don't match. This causes interactive crashlog to show
a degraded backtrace in lldb.
This patch aims to address that issue, by parsing the inlined symbols
from the crash report and load them into lldb's target.
This patch is a follow-up to 27f27d1, focusing on inlined symbols
loading from legacy (non-json) crash reports.
To do so, it updates the stack frame regular expression to make the
capture groups more granular, to be able to extract the symbol name, the
offset and the source location if available, while making it more
maintainable.
So now, when parsing the crash report, we build a data structure
containing all the symbol information for each stackframe. Then, after
launching the scripted process for interactive mode, we write a JSON
symbol file for each module, only containing the symbols that it contains.
Finally, we load the json symbol file into lldb, before showing the user
the process status and backtrace.
rdar://97345586
Differential Revision: https://reviews.llvm.org/D146765
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This is the next patch after D146058. We can now parse expressions to print instance variables from ObjC classes. Until now the expression parser would bail out with an error like this:
```
error: expression failed to parse:
error: Error [IRForTarget]: Couldn't find Objective-C indirect ivar symbol OBJC_IVAR_$_TestObj._int
```
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D146154
This patch adds test infrastructure to utilize the GNUstep runtime in the LLDB test suite and adds coverage for features that already work on Linux. These seem accidental in parts, but it's a good early baseline. On Windows nothing works yet. Please find the repository for the GNUstep ObjC runtime here: https://github.com/gnustep/libobjc2
GNUstep support is disabled by default. CMake configuration involves two variables:
* `LLDB_TEST_OBJC_GNUSTEP=On` enables GNUstep support in the test suite. It requires the libobjc2 shared library and headers to be found.
* `LLDB_TEST_OBJC_GNUSTEP=Off` disables GNUstep support in the test suite and resets associated cache values if necessary (default).
* `LLDB_TEST_OBJC_GNUSTEP_DIR` allows to pass a custom installation root.
Differential Revision: https://reviews.llvm.org/D146058
The S_LPROC32_ID and S_GPROC32_ID CodeView Debug Symbols have a flags
field which LLVM has had the values for (in the ProcSymFlags enum) but
has never actually set.
These flags are used by Microsoft-internal tooling that leverages debug
information to do binary analysis.
Modified LLVM to set the correct flags:
- ProcSymFlags::HasOptimizedDebugInfo - always set, as this indicates that
debug info is present for optimized builds (if debug info is not emitted
for optimized builds, then LLVM won't emit a debug symbol at all).
- ProcSymFlags::IsNoReturn and ProcSymFlags::IsNoInline - set if the
function has the NoReturn or NoInline attributes respectively.
- ProcSymFlags::HasFP - set if the function requires a frame pointer (per
TargetFrameLowering::hasFP).
Per discussion in review, XFAIL'ing lldb test until someone working on
lldb has a chance to look at it.
Differential Revision: https://reviews.llvm.org/D148761
selecting the "Most relevant" frame.
If you don't do that, then the correct frame gets selected, but it
happens AFTER the frame info gets printed in the stop message, so
you don't see the selected frame.
The test for this hid the issue because it ran `frame info` and
checked the result of that. That happens after the recognizer selects
the frame, and so it was right. But if the recognizer is working
correctly it will have already done the same printing in the stop
message, and this way we also verify that the stop message was right.
Differential Revision: https://reviews.llvm.org/D150315
Windows uses COFF as an object file format and PE/COFF as an executable
file format. They are subtly different and certain elements of a COFF
file may not be present in an executable. Introduce a new plugin to add
support for the COFF object file format which is required to support
loading of modules built with -gmodules. This is motivated by Swift
which serialises debugging information into a PCM which is a COFF object
file.
Differential Revision: https://reviews.llvm.org/D149987
Reviewed By: bulbazord
This patch resolves an issue where a value
is incorrectly displayed if it is represented
by DW_OP_div.
This issue is caused by lldb evaluating
operands of DW_OP_div as unsigned
and performed unintended unsigned
division.
This issue is resolved by creating two
temporary signed scalar and performing
signed division.
(Addresses GH#61727)
Differential Revision: https://reviews.llvm.org/D147370
This patch resolves an issue where a value
is incorrectly displayed if it is represented
by DW_OP_div.
This issue is caused by lldb evaluating
operands of DW_OP_div as unsigned
and performed unintended unsigned
division.
This issue is resolved by creating two
temporary signed scalar and performing
signed division.
(Addresses GH#61727)
Differential Revision: https://reviews.llvm.org/D147370
Remove TestExternalEditor.test as the code to open the transcript in an
external editor is conditional on lldb running in a graphical session.
As a result this test passes locally but not on the bots.
Add a new setting (debugger.external-editor) to specify an external
editor. The setting takes precedence over the existing
LLDB_EXTERNAL_EDITOR environment variable.
Differential revision: https://reviews.llvm.org/D149565
Allow the ObjectFileELF plugin to resolve R_ARM_ABS32 relocations from AArch32 object files. This fixes https://github.com/llvm/llvm-project/issues/61948
The existing architectures work with RELA-type relocation records that read addend from the relocation entry. REL-type relocations in AArch32 store addend in-place.
The new function doesn't re-use ELFRelocation::RelocAddend32(), because the interface doesn't match: in addition to the relocation entry we need the actual target section memory.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D147642
This is useful in contexts where you have multiple languages in play:
You may be stopped in a frame for language A, but want to set a watchpoint
with an expression using language B. The current way to do this is to
use the setting `target.language` while setting the watchpoint and
unset it after the watchpoint is set, but that's kind of clunky and
somewhat error-prone. This should add a better way to do this.
rdar://108202559
Differential Revision: https://reviews.llvm.org/D149111
Create an artificial module using a JSON object file when we can't
locate the module and dSYM through dsymForUUID (or however
locate_module_and_debug_symbols is implemented). By parsing the symbols
from the crashlog and making them part of the JSON object file, LLDB can
symbolicate frames it otherwise wouldn't be able to, as there is no
module for it.
For non-interactive crashlogs, that never was a problem because we could
simply show the "pre-symbolicated" frame from the input. For interactive
crashlogs, we need a way to pass the symbol information to LLDB so that
it can symbolicate the frames, which is what motivated the JSON object
file format.
Differential revision: https://reviews.llvm.org/D148172
This test previously relied on just segfaulting or not. This commit adds
a CHECK statement to the test.
Differential Revision: https://reviews.llvm.org/D148151
The test may fail when running from a directory that contains the string used in
CHECK-NOT. We observe flakiness rate of around 3/100000. Increasing the length
helps reducing the rate of failures.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D148099
The function DWARFASTParserClang::ParsePointerToMemberType attempts to make
two pointers and then immediately tries to dereference them, without
verifying that the pointesr were successfully created. Sometimes the pointer
creation fails, and the dereference then causes a segfault. This add a check
that the pointers are non-null before attempting to dereference them.
In Shell tests, replace use of the `p` alias with the `expression` command.
To avoid conflating tests of the alias with tests of the expression command,
this patch canonicalizes to the use `expression`.
See also D141539 which made the same change to API tests.
Differential Revision: https://reviews.llvm.org/D146230
According to `/usr/include/elf.h` and `lldb/source/Plugins/ObjectFile/ELF/ELFHeader.h`.
For ELF64 relocation, types of `offset` and `addend` should be `elf_addr` and `elf_sxword`.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D145550
Currently ApplyReloctions() deals with different archs' relocation types
together (in a single `switch() {..}`). I think it is incorrect because
different relocation types of different archs may have same enum values.
For example:
`R_LARCH_32` and `R_X86_64_64` are both `1`;
`R_LARCH_64` and `R_X86_64_PC32` are both `2`.
This patch handles each arch in seperate `switch()` to solve the enum
values conflict issue.
And a new test is added for LoongArch64.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D145462
This patch copies over log files to the diagnostic directory. The caveat
here is that this only works for logs that are redirected to a file. The
implementation piggybacks of the mapping kept by the debugger. The
advantage is that it's free until you generate the diagnostics, at which
point you only pay the price of copying over the file.
Differential revision: https://reviews.llvm.org/D135631
Before this patch, LLDB used to format pointers to members, such as,
```
void (Foo::*pointer_to_member_func)() = &Foo::member_func;
```
as `eFormatBytes`. E.g.,
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) $1 = 94 3f 00 00 01 00 00 00 00 00 00 00 00 00 00 00
```
This patch makes sure we format pointers to member functions the same
way we do regular function pointers.
After this patch we format member pointers as:
```
(lldb) v pointer_to_member_func
(void (Foo::*)()) ::pointer_to_member_func = 0x00000000000000000000000100003f94
```
Differential Revision: https://reviews.llvm.org/D145241
Currently empty arguments are not respected. They are silently dropped
in two places: (1) when extracting them from the target.run-args
setting and (2) when constructing the lldb-argdumper invocation.
(1) is actually a regression from a few years ago. We did not always
drop empty arguments. See 31d97a5c8a.
rdar://106279228
Differential Revision: https://reviews.llvm.org/D145450
In an upcoming patch, D142556, Clang is proposed to be changed to emit
line locations that are inlined at line 0. This clashed with the behavior of
GetDIENamesAndRanges() which used 0 as a default value to determine if
file, line or column numbers had been set. Users of that function then
checked for any non-0 values when setting up the call site:
if (call_file != 0 || call_line != 0 || call_column != 0)
[...]
which did not work with the Clang change since all three values then
could be 0.
This changes the function to use std::optional to catch non-set values
instead.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D142552
This came out of from https://discourse.llvm.org/t/dwarf-dwp-4gb-limit/63902
With big binaries we can have .dwp files where .debug_info.dwo section can grow
beyond 4GB. We would like to support this in LLVM and in LLDB.
The plan is to enable manual parsing of cu/tu index in DWARF library
(https://reviews.llvm.org/D137882), and then
switch internal index data structure to 64 bit.
For the second part is to enable 64bit offset support in LLDB with
this patch.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D138618
This came out of from https://discourse.llvm.org/t/dwarf-dwp-4gb-limit/63902
With big binaries we can have .dwp files where .debug_info.dwo section can grow
beyond 4GB. We would like to support this in LLVM and in LLDB.
The plan is to enable manual parsing of cu/tu index in DWARF library
(https://reviews.llvm.org/D137882), and then
switch internal index data structure to 64 bit.
For the second part is to enable 64bit offset support in LLDB with
this patch.
Depends on D139955
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D138618
