Before, NativePDB uses scoped range as a workaround for value range, that causes
problems (e.g. a variable's value can only have one range, but usually a
variable's value is located at different address ranges, each at different
locations, in optimized build).
This patch let NativePDB switch to DWARFLocationList so a variable's value can
be described at multiple non-overlapped address ranges and each range maps to a
location.
Because overlapping ranges exists, here's peference when choosing ranges:
1. Always prefer whole value locations. Suppose a variable size is 8 bytes, one record is that for range [1, 5) first 4 bytes is at ecx, and another record is that for range [2, 8) the 8 bytes value is at rdx. This results: [1, 2) has first 4 bytes at ecx, [2, 8) has the whole value at rdx.
2. Always prefer the locations parsed later. Suppose first record is that for range [1, 5) value is at ecx, second record is that for range [2, 6) value is at eax. This results: [1, 2) -> ecx, [2, 6) -> eax.
Differential Revision: https://reviews.llvm.org/D130796
This reverts commit 967df65a36.
This fixes test/Shell/SymbolFile/NativePDB/find-functions.cpp. When
looking up functions with the PDB plugins, if we are looking for a
full function name, we should use `GetName` to populate the `name`
field instead of `GetLookupName` since `GetName` has the more
complete information.
Context:
When setting a breakpoint by name, we invoke Module::FindFunctions to
find the function(s) in question. However, we use a Module::LookupInfo
to first process the user-provided name and figure out exactly what
we're looking for. When we actually perform the function lookup, we
search for the basename. After performing the search, we then filter out
the results using Module::LookupInfo::Prune. For example, given
a::b::foo we would first search for all instances of foo and then filter
out the results to just names that have a::b::foo in them. As one can
imagine, this involves a lot of debug info processing that we do not
necessarily need to be doing. Instead of doing one large post-processing
step after finding each instance of `foo`, we can filter them as we go
to save time.
Some numbers:
Debugging LLDB and placing a breakpoint on
llvm::itanium_demangle::StringView::begin without this change takes
approximately 70 seconds and resolves 31,920 DIEs. With this change,
placing the breakpoint takes around 30 seconds and resolves 8 DIEs.
Differential Revision: https://reviews.llvm.org/D129682
Resubmission of https://reviews.llvm.org/D130309 with the 2 patches that fixed the linux buildbot, and new windows fixes.
The FileSpec APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossible to control all of the times the FileSpec object is modified so we can clear cached member variables like m_resolved and with an upcoming patch caching if the file is relative or absolute. This patch modifies the APIs of FileSpec so no one can modify the directory or filename instance variables directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130549
The FileSpect APIs allow users to modify instance variables directly by getting a non const reference to the directory and filename instance variables. This makes it impossibly to control all of the times the FileSpec object is modified so we can clear the cache. This patch modifies the APIs of FileSpec so no one can modify the directory or filename directly by adding set accessors and by removing the get accessors that are non const.
Many clients were using FileSpec::GetCString(...) which returned a unique C string from a ConstString'ified version of the result of GetPath() which returned a std::string. This caused many locations to use this convenient function incorrectly and could cause many strings to be added to the constant string pool that didn't need to. Most clients were converted to using FileSpec::GetPath().c_str() when possible. Other clients were modified to use the newly renamed version of this function which returns an actualy ConstString:
ConstString FileSpec::GetPathAsConstString(bool denormalize = true) const;
This avoids the issue where people were getting an already uniqued "const char *" that came from a ConstString only to put the "const char *" back into a "ConstString" object. By returning the ConstString instead of a "const char *" clients can be more efficient with the result.
The patch:
- Removes the non const GetDirectory() and GetFilename() get accessors
- Adds set accessors to replace the above functions: SetDirectory() and SetFilename().
- Adds ClearDirectory() and ClearFilename() to replace usage of the FileSpec::GetDirectory().Clear()/FileSpec::GetFilename().Clear() call sites
- Fixed all incorrect usage of FileSpec::GetCString() to use FileSpec::GetPath().c_str() where appropriate, and updated other call sites that wanted a ConstString to use the newly returned ConstString appropriately and efficiently.
Differential Revision: https://reviews.llvm.org/D130309
llvm::codeview::visitMemberRecordStream expects to receive an array ref that's FieldListRecord's Data not a CVType's data which has 4 more bytes preceeding. The first 2 bytes indicate the size of the FieldListRecord, and following 2 bytes is always 0x1203. Inside llvm::codeview::visitMemberRecordStream, it iterates to the data to check if first two bytes matching some type record kinds. If the size coincidentally matches one type kind, it will start parsing from there and causing crash.
This patch writes a mapping structure for converting CodeView Arm64 register numbers to LLDB Arm64 regnums.
This fixes various symbols and variable location test failures on AArch64/Windows.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D128221
On Windows, when compile with -fdebug-compilation-dir which contains slash, the source file path in PDB will look like "../tmp\file.cc" because the path separator used is determined by target machine. Converting backslash to slash helps lldb to find the CU in ResolveSymbolContext.
We want to filter out CU with no function in ResolveSymbolContext as a cpp file will have two debug info modules in PDB if built with thinlto and one of them is a skeleton with no function debug info.
1. If array element type is a tag decl, complete it.
2. Fix few places where `asTag` should be used instead of `asClass()`.
3. Handle the case that `PdbAstBuilder::CreateFunctionDecl` return nullptr mainly due to an existing workaround (`m_cxx_record_map`).
4. `FindMembersSize` should never return error as this would cause early exiting in `CVTypeVisitor::visitFieldListMemberStream` and then cause assertion failure.
5. In some pdbs from C++ runtime libraries have S_LPROC32 followed directly by S_LOCAL and the local variable location is a S_DEFRANGE_FRAMEPOINTER_REL. There is no information about base frame register in this case, ignoring it by returning RegisterId::NONE.
6. Add a TODO when S_DEFRANGE_SUBFIELD_REGISTER describes the variable location of a pointer type. For now, just ignoring it if the variable is pointer.
NativePDB often assumes that all debug info are available.
This is one step to make it more pervasive.
Differential Revision: https://reviews.llvm.org/D125844
- Don't reset cur_line_offset to llvm::None when we don't have next_line_offset, because we may need to reuse it in new range after a code end.
- Don't use CombineConsecutiveEntriesWithEqualData for inline_site_sp->ranges, because that will combine consecutive entries with same data in the vector regardless of the entry's range. Originally, I thought that it only combine consecutive entries if adjacent entries' ranges are adjoining or intersecting with each other.
Previously, I was assuming that S_DEFRANGE_SUBFIELD_REGISTERs are always in the
increasing order of offset_in_parent until I saw a counter example.
Using `std::map` so that they are sorted by offset_in_parent.
Differential Revision: https://reviews.llvm.org/D124061
When a variable is simple type and has 64 bits, the debug info may look like the following when targeting 32bit windows. The variable's content is split into two 32bits registers.
```
480 | S_LOCAL [size = 12] `x`
type=0x0013 (__int64), flags = param
492 | S_DEFRANGE_SUBFIELD_REGISTER [size = 20]
register = EAX, may have no name = true, offset in parent = 0
range = [0001:0073,+7), gaps = []
512 | S_DEFRANGE_SUBFIELD_REGISTER [size = 20]
register = ECX, may have no name = true, offset in parent = 4
range = [0001:0073,+7), gaps = []
```
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D122943
It fixes the following case:
```
0602 line 1 (+1)
0315 code 0x15 (+0x15)
0B2B code 0x20 (+0xB) line 2 (+1)
0602 line 3 (+1)
0311 code 0x31 (+0x11)
...
```
Inline ranges should have following mapping:
`[0x15, 0x20) -> line 1`
`[0x20, 0x31) -> line 2`
Inline line entries:
`0x15, line 1`, `0x20, line 2`, `0x31, line 3`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D123092
This creates inline functions decls in the TUs where the funcitons are inlined and local variable decls inside those functions.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D121967
`UdtRecordCompleter` shouldn't complete static members' types. static members' types are going to be completed when the types are called in `SymbolFile::CompleteType`.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D121030
D115300 added Rust as a new PDB language type.
This change allows LLDB to recognize the new language type.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D119044
Major user-facing changes:
Many headers in llvm/DebugInfo/CodeView no longer include
llvm/Support/BinaryStreamReader.h or llvm/Support/BinaryStreamWriter.h,
those headers may need to be included manually.
Several headers in llvm/DebugInfo/CodeView no longer include
llvm/DebugInfo/CodeView/EnumTables.h or llvm/DebugInfo/CodeView/CodeView.h,
those headers may need to be included manually.
Some statistics:
$ clang++ -E -Iinclude -I../llvm/include ../llvm/lib/DebugInfo/CodeView/*.cpp -std=c++14 -fno-rtti -fno-exceptions | wc -l
after: 2794466
before: 2832765
Discourse thread on the topic: https://discourse.llvm.org/t/include-what-you-use-include-cleanup/
Differential Revision: https://reviews.llvm.org/D119092
