A PREDICATE_CAST(PREDICATE_CAST(X)) can be converted to a
PREDICATE_CAST(X) as the operation can convert between any forms of
predicates (v4i1/v8i1/v16i1/i32). Unfortunately I got the type wrong on
one of the rarer converts, which would lead to invalid nodes during
isel. This fixes it up to use the correct type.
Differential Revision: https://reviews.llvm.org/D79402
This patch makes the folding of or(A, B) into not(and(not(A), not(B)))
more agressive for I1 vector. This only affects Thumb2 MVE and improves
codegen, because it removes a lot of msr/mrs instructions on VPR.P0.
This patch also adds a xor(vcmp) -> !vcmp fold for MVE.
Differential Revision: https://reviews.llvm.org/D77202
This patch adds an implementation of PerformVSELECTCombine in the
ARM DAG Combiner that transforms vselect(not(cond), lhs, rhs) into
vselect(cond, rhs, lhs).
Normally, this should be done by the target-independent DAG Combiner,
but it doesn't handle the kind of constants that we generate, so we
have to reimplement it here.
Differential Revision: https://reviews.llvm.org/D77712
This changes the logic with lowering fp16 bitcasts to always produce
either a VMOVhr or a VMOVrh, instead of only trying to do it with
certain surrounding nodes. To perform the same optimisations demand bits
and known bits information has been added for them.
Differential Revision: https://reviews.llvm.org/D78587
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
When compiling for a arm5te cpu from clang, the +dsp attribute is set.
This meant we could try and generate qadd8 instructions where we would
end up having no pattern. I've changed the condition here to be hasV6Ops
&& hasDSP, which is what other parts of ARMISelLowering seem to use for
similar instructions.
Fixed PR45677.
Differential Revision: https://reviews.llvm.org/D78877
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: grosbach, efriedma, sdesmalen
Reviewed By: efriedma
Subscribers: hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77271
Currently when the target is big-endian vmov.i64 reverses the order of the two
words of the vector. This is correct only when the underlying element type is
32-bit, as actually what it should be doing is considering it a vector of the
underlying type and reversing the elements of that.
Differential Revision: https://reviews.llvm.org/D76515
If we have an element-wise vmov immediate instruction then a subsequent vrev
with width greater or equal to the vmov element width, then that vrev won't do
anything. Add a DAG combine to convert bitcasts that would become such vrevs
into vector_reg_casts instead.
Differential Revision: https://reviews.llvm.org/D76514
This adds MVE vmull patterns, which are conceptually the same as
mul(vmovl, vmovl), and so the tablegen patterns follow the same
structure.
For i8 and i16 this is simple enough, but in the i32 version the
multiply (in 64bits) is illegal, meaning we need to catch the pattern
earlier in a dag fold. Because bitcasts are involved in the zext
versions and the patterns are a little different in little and big
endian. I have only added little endian support in this patch.
Differential Revision: https://reviews.llvm.org/D76740
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
Summary:
Also deprecate getOriginalAlignment, getAlignment will take much more time as it is pervasive through the codebase (including TableGened files).
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76933
In the original batch of MVE VMOVimm code generation VMOV.i64 was left
out due to the way it was done downstream. It turns out that it's fairly
simple though. This adds the codegen for it, similar to NEON.
Bigendian is technically incorrect in this version, which John is fixing
in a Neon patch.
Some MVE floating point instructions have gpr register variants that take
the scalar gpr value and splat them to all lanes. In order to accept
them in loops, the shuffle_vector and insert need to be sunk down into
the loop, next to the instruction so that ISel can see the whole
pattern.
This does that sinking for FAdd, FSub, FMul and FCmp. The patterns for
mul are slightly more constrained as there are no fms variants taking
register arguments.
Differential Revision: https://reviews.llvm.org/D76023
This adds a simple fold to combine VMOVrh load to a integer load.
Similar to what is already performed for BITCAST, but needs to account
for the types being of different sizes, creating an zero extending load.
Differential Revision: https://reviews.llvm.org/D76485
We deliberately split stores of the form
store(truncate(larger-than-legal-type)) into two stores, allowing each
store to perform part of the truncate for free.
There are times however where it makes more sense to use VMOVN to
de-interlace the results back into a single vector, and store that in
one go. This adds a check for that situation, not splitting the store if
it looks like a VMOVN can be more useful.
Differential Revision: https://reviews.llvm.org/D76511
Summary:
I've implemented them as target-specific IR intrinsics rather than
using `@llvm.experimental.vector.reduce.add`, on the grounds that the
'experimental' intrinsic doesn't currently have much code generation
benefit, and my replacements encapsulate the sign- or zero-extension
so that you don't expose the illegal MVE vector type (`<4 x i64>`) in
IR.
The machine instructions come in two versions: with and without an
input accumulator. My new IR intrinsics, like the 'experimental' one,
don't take an accumulator parameter: we represent that by just adding
on the input value using an ordinary i32 or i64 add. So if you write
the `vaddvaq` C-language intrinsic with an input accumulator of zero,
it can be optimised to VADDV, and conversely, if you write something
like `x += vaddvq(y)` then that can be combined into VADDVA.
Most of this is achieved in isel lowering, by converting these IR
intrinsics into the existing `ARMISD::VADDV` family of custom SDNode
types. For the difficult case (64-bit accumulators), isel lowering
already implements the optimization of folding an addition into a
VADDLV to make a VADDLVA; so once we've made a VADDLV, our job is
already done, except that I had to introduce a parallel set of ARMISD
nodes for the //predicated// forms of VADDLV.
For the simpler VADDV, we handle the predicated form by just leaving
the IR intrinsic alone and matching it in an ordinary dag pattern.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76491
Summary:
I've implemented these as target-specific IR intrinsics, because
they're not //quite// enough like @llvm.experimental.vector.reduce.min
(which doesn't take the extra scalar parameter). Also this keeps the
predicated and unpredicated versions looking similar, and the
floating-point minnm/maxnm versions fold into the same schema.
We had a couple of min/max reductions already implemented, from the
initial pathfinding exercise in D67158. Those were done by having
separate IR intrinsic names for the signed and unsigned integer
versions; as part of this commit, I've changed them to use a flag
parameter indicating signedness, which is how we ended up deciding
that the rest of the MVE intrinsics family ought to work. So now
hopefully the ewhole lot is consistent.
In the new llc test, the output code from the `v8f16` test functions
looks quite unpleasant, but most of it is PCS lowering (you can't pass
a `half` directly in or out of a function). In other circumstances,
where you do something else with your `half` in the same function, it
doesn't look nearly as nasty.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76490
The MVE VDUP instruction take a GPR and splats into every lane of a
vector register. Unlike NEON we do not have a VDUPLANE equivalent
instruction, doing the same splat from a fp register. Previously a VDUP
to a v4f32/v8f16 would be represented as a (v4f32 VDUP f32), which
would mean the instruction pattern needs to add a COPY_TO_REGCLASS to
the GPR.
Instead this now converts that earlier during an ISel DAG combine,
converting (VDUP x) to (VDUP (bitcast x)). This can allow instruction
selection to tell that the input needs to be an i32, which in one of the
testcases allows it to use ldr (or specifically ldm) over (vldr;vmov).
Whilst being simple enough for floats, as the types sizes are the same,
these is no BITCAST equivalent for getting a half into a i32. This uses
a VMOVrh ARMISD node, which doesn't know the same tricks yet.
Differential Revision: https://reviews.llvm.org/D76292
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
When optimising for code size at the expense of performance, it is often
worth saving and restoring some of r0-r3, if IPRA will be able to take
advantage of them. This doesn't cost any extra code size if we already
have a PUSH/POP pair, and increases the number of available registers
across any calls to the function.
We already have an optimisation which tries fold the subtract/add of the
SP into the PUSH/POP by using extra registers, which somewhat conflicts
with this. I've made the new optimisation less aggressive in cases where
the existing one is likely to trigger, which gives better results than
either of these optimisations by themselves.
Differential revision: https://reviews.llvm.org/D69936
Summary:
These are complicated integer multiply+add instructions with extra
saturation, taking the high half of a double-width product, and
optional rounding. There's no sensible way to represent that in
standard IR, so I've converted the clang builtins directly to
target-specific intrinsics.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76123
Summary:
These instructions compute multiply+add in integers, with one of the
operands being a splat of a scalar. (VMLA and VMLAS differ in whether
the splat operand is a multiplier or the addend.)
I've represented these in IR using existing standard IR operations for
the unpredicated forms. The predicated forms are done with target-
specific intrinsics, as usual.
When operating on n-bit vector lanes, only the bottom n bits of the
i32 scalar operand are used. So we have to tell that to isel lowering,
to allow it to remove a pointless sign- or zero-extension instruction
on that input register. That's done in `PerformIntrinsicCombine`, but
first I had to enable `PerformIntrinsicCombine` for MVE targets
(previously all the intrinsics it handled were for NEON), and make it
a method of `ARMTargetLowering` so that it can get at
`SimplifyDemandedBits`.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, danielkiss, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D76122
The ASRL/LSRL long shifts are generated from 64bit shifts. Once we have
them, it might turn out that enough of the 64bit result was not required
that we can use a smaller shift to perform the same result. As the
smaller shift can in general be folded in more way, such as into add
instructions in one of the test cases here, we can use the demand bit
analysis to prefer the smaller shifts where we can.
Differential Revision: https://reviews.llvm.org/D75371
This changes the way that asrl and lsrl intrinsics are lowered, going
via a the ISEL ASRL and LSLL nodes instead of straight to machine nodes.
On top of that, it adds some constant folds for long shifts, in case it
turns out that the shift amount was either constant or 0.
Differential Revision: https://reviews.llvm.org/D75553
Summary:
Instead of generating two i32 instructions for each load or store of a volatile
i64 value (two LDRs or STRs), now emit LDRD/STRD.
These improvements cover architectures implementing ARMv5TE or Thumb-2.
The code generation explicitly deviates from using the register-offset
variant of LDRD/STRD. In this variant, the register allocated to the
register-offset cannot be reused in any of the remaining operands. Such
restriction seems to be non-trivial to implement in LLVM, thus it is
left as a to-do.
Reviewers: dmgreen, efriedma, john.brawn, nickdesaulniers
Reviewed By: efriedma, nickdesaulniers
Subscribers: danielkiss, alanphipps, hans, nathanchance, nickdesaulniers, vvereschaka, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70072
On some Arm cores there is a performance penalty when forwarding from an
S register to a D register. Calculating VMAX in a D register creates
false forwarding hazards, so don't do that unless we're on a core which
specifically asks for it.
Patch by James Greenhalgh
Differential Revision: https://reviews.llvm.org/D75248
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Similar to VADDV and VADDLV that have been added recently, this adds
lowering and patterns for VMLAV, VMLAVA, VMLALV and VMLALVA. They
perform the same roles as the add's, just folding a mul into the same
instruction (and so taking two inputs). As such, they need to be lowered
in the same way as the types are often not legal.
Differential Revision: https://reviews.llvm.org/D74390
Following on from the extra VADDV lowering, this extends things to
handle VADDLV which allows summing values into a pair of i32 registers,
together treated as a i64. This needs to be done in DAGCombine too as
the types are otherwise illegal, which is a fairly simple addition on
top of the existing code.
There is also a VADDLVA instruction handled here, that adds the incoming
values from the two general purpose registers. As opposed to the
non-long version where we could just add patterns for add(x, VADDV), the
long version needs to handle this early before the i64 has being split
into too many pieces.
Differential Revision: https://reviews.llvm.org/D74224
We already make use of the VADDV vector reduction instruction for cases
where the input and the output start out at the same type. The MVE
instruction however will sum into an i32, so if we are summing a v16i8
into an i32, we can still use the same instructions. In terms of IR,
this looks like a sext of a legal type (v16i8) into a very illegal type
(v16i32) and a vecreduce.add of that into the result. This means we have
to catch the pattern early in a DAG combine, producing a target VADDVs/u
node, where the signedness is now important.
This is the first part, handling VADDV and VADDVA. There are also
VADDVL/VADDVLA instructions, which are interesting because they sum into
a 64bit value. And VMLAV and VMLALV, which are interesting because they
also do a multiply of two values. It may look a little odd in places as
a result.
On it's own this will probably not do very much, as the vectorizer will
not produce this IR yet.
Differential Revision: https://reviews.llvm.org/D74218
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
