This fixes the two test suite failures that I missed in the PR:
https://github.com/llvm/llvm-project/pull/112939
One was a poorly written test case - it assumed that on connect to a
gdb-remote with a running process, lldb MUST have fetched all the frame
0 registers. In fact, there's no need for it to do so (as the CallSite
patch showed...) and if we don't need to we shouldn't. So I fixed the
test to only expect a `g` packet AFTER calling read_registers.
The other was a place where some code had used 0 when it meant
LLDB_INVALID_LINE_NUMBER, which I had fixed but missed one place where
it was still compared to 0.
This is to work around the fact that
`SymbolFileNativePDB::FindFunctions` only support
`lldb::eFunctionNameTypeFull` and `lldb::eFunctionNameTypeMethod` now.
Since `main`'s full name is the same as base name (`main`), it's okay to
search with `lldb::eFunctionNameTypeFull` when trying to get the default
file and line. With this, `lldb/test/Shell/Driver/TestSingleQuote.test`
passes on Windows with NativePDB plugin.
…ne stepping (#112939)"
This was breaking some gdb-remote packet counting tests on the bots. I
can't see how this patch could cause that breakage, but I'm reverting to
figure that out.
This reverts commit f147437945.
Previously lldb didn't support setting breakpoints on call site
locations. This patch adds that ability.
It would be very slow if we did this by searching all the debug
information for every inlined subroutine record looking for a call-site
match, so I added one restriction to the call-site support. This change
will find all call sites for functions that also supply at least one
line to the regular line table. That way we can use the fact that the
line table search will move the location to that subsequent line (but
only within the same function). When we find an actually moved source
line match, we can search in the function that contained that line table
entry for the call-site, and set the breakpoint location back to that.
When I started writing tests for this new ability, it quickly became
obvious that our support for virtual inline stepping was pretty buggy.
We didn't print the right file & line number for the breakpoint, and we
didn't set the position in the "virtual inlined stack" correctly when we
hit the breakpoint. We also didn't step through the inlined frames
correctly. There was code to try to detect the right inlined stack
position, but it had been refactored a while back with the comment that
it was super confusing and the refactor was supposed to make it clearer,
but the refactor didn't work either.
That code was made much clearer by abstracting the job of "handling the
stack readjustment" to the various StopInfo's. Previously, there was a
big (and buggy) switch over stop info's. Moving the responsibility to
the stop info made this code much easier to reason about.
We also had no tests for virtual inlined stepping (our inlined stepping
test was actually written specifically to avoid the formation of a
virtual inlined stack... So I also added tests for that along with the
tests for setting the call-site breakpoints.
ValueObject is part of lldbCore for historical reasons, but conceptually
it deserves to be its own library. This does introduce a (link-time) circular
dependency between lldbCore and lldbValueObject, which is unfortunate
but probably unavoidable because so many things in LLDB rely on
ValueObject. We already have cycles and these libraries are never built
as dylibs so while this doesn't improve the situation, it also doesn't
make things worse.
The header includes were updated with the following command:
```
find . -type f -exec sed -i.bak "s%include \"lldb/Core/ValueObject%include \"lldb/ValueObject/ValueObject%" '{}' \;
```
We have got customer reporting "v &obj" and "p &obj" reporting different
results.
Turns out it only happens for obj that is itself a reference type which
"v &obj" reports the address of the reference itself instead of the
target object the reference points to. This diverged from C++ semantics.
This PR fixes this issue by returning the address of the dereferenced
object if it is reference type.
A new test is added which fails before.
Co-authored-by: jeffreytan81 <jeffreytan@fb.com>
I've been getting complaints from users being spammed by -gmodules
missing file warnings going out of control because each object file
depends on an entire DAG of PCM files that usually are all missing at
once. To reduce this problem, this patch does two things:
1. Module now maintains a DenseMap<hash, once> that is used to display
each warning only once, based on its actual text.
2. The PCM warning itself is reworded to include less details, such as
the DIE offset, which is only useful to LLDB developers, who can get
this from the dwarf log if they need it. Because the detail is omitted
the hashing from (1) deduplicates the warnings.
rdar://138144624
This patch adds the support to `Process.cpp` to automatically save off
TLS sections, either via loading the memory region for the module, or
via reading `fs_base` via generic register. Then when Minidumps are
loaded, we now specify we want the dynamic loader to be the `POSIXDYLD`
so we can leverage the same TLS accessor code as `ProcessELFCore`. Being
able to access TLS Data is an important step for LLDB generated
minidumps to have feature parity with ELF Core dumps.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
As specified in the docs,
1) raw_string_ostream is always unbuffered and
2) the underlying buffer may be used directly
( 65b13610a5 for further reference )
* Don't call raw_string_ostream::flush(), which is essentially a no-op.
* Avoid unneeded calls to raw_string_ostream::str(), to avoid excess
indirection.
Emit signpost intervals for progress events so that when users report an
operation takes a long time, we can investigate the issue with
Instruments.app.
Print a warning when the debugger detects a mismatch between the MD5
checksum in the DWARF 5 line table and the file on disk. The warning is
printed only once per file.
This PR adds a statistics provider cache, which allows an individual
target to keep a rolling tally of it's total time and number of
invocations for a given summary provider. This information is then
available in statistics dump to help slow summary providers, and gleam
more into insight into LLDB's time use.
Now that more parts of LLDB know about SupportFiles, avoid going through
FileSpec (and losing the Checksum in the process). Instead, use the
SupportFile directly.
This patch updates the source cache dump command to print both the
actual (on-disk) checksum and the expected (line table) checksum. To
achieve that we now read and store the on-disk checksum in the cached
object. The same information will be used in a future path to print a
warning when the checksums differ.
This patch removes all of the Set.* methods from Status.
This cleanup is part of a series of patches that make it harder use the
anti-pattern of keeping a long-lives Status object around and updating
it while dropping any errors it contains on the floor.
This patch is largely NFC, the more interesting next steps this enables
is to:
1. remove Status.Clear()
2. assert that Status::operator=() never overwrites an error
3. remove Status::operator=()
Note that step (2) will bring 90% of the benefits for users, and step
(3) will dramatically clean up the error handling code in various
places. In the end my goal is to convert all APIs that are of the form
` ResultTy DoFoo(Status& error)
`
to
` llvm::Expected<ResultTy> DoFoo()
`
How to read this patch?
The interesting changes are in Status.h and Status.cpp, all other
changes are mostly
` perl -pi -e 's/\.SetErrorString/ = Status::FromErrorString/g' $(git
grep -l SetErrorString lldb/source)
`
plus the occasional manual cleanup.
Compilers and language runtimes often use helper functions that are
fundamentally uninteresting when debugging anything but the
compiler/runtime itself. This patch introduces a user-extensible
mechanism that allows for these frames to be hidden from backtraces and
automatically skipped over when navigating the stack with `up` and
`down`.
This does not affect the numbering of frames, so `f <N>` will still
provide access to the hidden frames. The `bt` output will also print a
hint that frames have been hidden.
My primary motivation for this feature is to hide thunks in the Swift
programming language, but I'm including an example recognizer for
`std::function::operator()` that I wished for myself many times while
debugging LLDB.
rdar://126629381
Example output. (Yes, my proof-of-concept recognizer could hide even
more frames if we had a method that returned the function name without
the return type or I used something that isn't based off regex, but it's
really only meant as an example).
before:
```
(lldb) thread backtrace --filtered=false
* thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1
* frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10
frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25
frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12
frame #3: 0x0000000100003968 a.out`std::__1::__function::__alloc_func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()[abi:se200000](this=0x000000016fdff280, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:171:12
frame #4: 0x00000001000026bc a.out`std::__1::__function::__func<int (*)(int, int), std::__1::allocator<int (*)(int, int)>, int (int, int)>::operator()(this=0x000000016fdff278, __arg=0x000000016fdff224, __arg=0x000000016fdff220) at function.h:313:10
frame #5: 0x0000000100003c38 a.out`std::__1::__function::__value_func<int (int, int)>::operator()[abi:se200000](this=0x000000016fdff278, __args=0x000000016fdff224, __args=0x000000016fdff220) const at function.h:430:12
frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10
frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10
frame #8: 0x0000000183cdf154 dyld`start + 2476
(lldb)
```
after
```
(lldb) bt
* thread #1, queue = 'com.apple.main-thread', stop reason = breakpoint 1.1
* frame #0: 0x0000000100001f04 a.out`foo(x=1, y=1) at main.cpp:4:10
frame #1: 0x0000000100003a00 a.out`decltype(std::declval<int (*&)(int, int)>()(std::declval<int>(), std::declval<int>())) std::__1::__invoke[abi:se200000]<int (*&)(int, int), int, int>(__f=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:149:25
frame #2: 0x000000010000399c a.out`int std::__1::__invoke_void_return_wrapper<int, false>::__call[abi:se200000]<int (*&)(int, int), int, int>(__args=0x000000016fdff280, __args=0x000000016fdff224, __args=0x000000016fdff220) at invoke.h:216:12
frame #6: 0x0000000100002038 a.out`std::__1::function<int (int, int)>::operator()(this= Function = foo(int, int) , __arg=1, __arg=1) const at function.h:989:10
frame #7: 0x0000000100001f64 a.out`main(argc=1, argv=0x000000016fdff4f8) at main.cpp:9:10
frame #8: 0x0000000183cdf154 dyld`start + 2476
Note: Some frames were hidden by frame recognizers
```
Reapply #100443 and #101770. These were originally reverted due to a
test failure and an MSAN failure. I changed the test attribute to
restrict to x86 (following the other existing tests). I could not
reproduce the test or the MSAN failure and no repo steps were provided.
Make all `Progress` destructions to cause `progressEnd` events,
regardless of the value of `m_completed` before the destruction.
Currently, a `Progress` instance with `m_completed != 0 && m_complete !=
m_total` will cause a `progressUpdate` event (not `progressEnd`) at
destruction and. This contradicts with the classdoc: "a progress completed
update is reported even if the user doesn't explicitly cause one to be sent."
In #100443, Mach-o and Minidump now only call process API's that take a
`SaveCoreOption` as the container for the style and information if a
thread should be included in the core or not. This introduced a bug
where in subsequent method calls we were not honoring the defaults of
both implementations.
~~To solve this I have made a copy of each SaveCoreOptions that is
mutable by the respective plugin. Originally I wanted to leave the
SaveCoreOptions as non const so these default value mutations could be
shown back to the user. Changing that behavior is outside of the scope
of this bugfix, but is context for why we are making a copy.~~
Removed const on the savecoreoptions so defaults can be inspected by the
user
CC: @Michael137
In #98403 I enabled the SBSaveCoreOptions object, which allows users via
the scripting API to define what they want saved into their core file.
As the first option I've added a threadlist, so users can scan and
identify which threads and corresponding stacks they want to save.
In order to support this, I had to add a new method to `Process.h` on
how we identify which threads are to be saved, and I had to change the
book keeping in minidump to ensure we don't double save the stacks.
Important to @jasonmolenda I also changed the MachO coredump to accept
these new APIs.
Currently a Module has a std::optional<UnwindTable> which is created
when the UnwindTable is requested from outside the Module. The idea is
to delay its creation until the Module has an ObjectFile initialized,
which will have been done by the time we're doing an unwind.
However, Module::GetUnwindTable wasn't doing any locking, so it was
possible for two threads to ask for the UnwindTable for the first time,
one would be created and returned while another thread would create one,
destroy the first in the process of emplacing it. It was an uncommon
crash, but it was possible.
Grabbing the Module's mutex would be one way to address it, but when
loading ELF binaries, we start creating the SymbolTable on one thread
(ObjectFileELF) grabbing the Module's mutex, and then spin up worker
threads to parse the individual DWARF compilation units, which then try
to also get the UnwindTable and deadlock if they try to get the Module's
mutex.
This changes Module to have a concrete UnwindTable as an ivar, and when
it adds an ObjectFile or SymbolFileVendor, it will call the Update
method on it, which will re-evaluate which sections exist in the
ObjectFile/SymbolFile. UnwindTable used to have an Initialize method
which set all the sections, and an Update method which would set some of
them if they weren't set. I unified these with the Initialize method
taking a `force` option to re-initialize the section pointers even if
they had been done already before.
This is addressing a rare crash report we've received, and also a
failure Adrian spotted on the -fsanitize=address CI bot last week, it's
still uncommon with ASAN but it can happen with the standard testsuite.
rdar://128876433
This patch introduces a new `template` multiword sub-command to the
`scripting` top-level command. As the name suggests, this sub-command
operates on scripting templates, and currently has the ability to
automatically discover the various scripting extensions that lldb
supports.
This was previously reviewed in #97273.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch introduces a new `template` multiword sub-command to the
`scripting` top-level command. As the name suggests, this sub-command
operates on scripting templates, and currently has the ability to
automatically discover the various scripting extensions that lldb
supports.
This was previously reviewed in #97273.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch introduces a new `template` multiword sub-command to the
`scripting` top-level command. As the name suggests, this sub-command
operates on scripting templates, and currently has the ability to
automatically discover the various scripting extensions that lldb
supports.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This PR adds `SBSaveCoreOptions`, which is a container class for options
when LLDB is taking coredumps. For this first iteration this container
just keeps parity with the extant API of `file, style, plugin`. In the
future this options object can be extended to allow users to take a
subset of their core dumps.
When doing firmware/kernel debugging, it is frequent that binaries and
debug info need to be retrieved / downloaded, and the lack of progress
reports made for a poor experience, with lldb seemingly hung while
downloading things over the network. This PR adds progress reports to
the critical sites for these use cases.
This improves the handling of `$` (dollar) characters in summary strings in the
following ways:
1. When a `$` is not followed by an open paren (`{`), it should be treated as a literal
character and preserved in the output. Previously, the dollar would be consumed by the
parser and not shown in the output.
2. When a `$` is the last character of a format string, this change eliminates the
infinite loop lldb would enter into.
rdar://131392446
This reverts commit d9e659c538.
I could not reproduce the Mac OS ASAN failure locally but I narrowed it
down to the test `test_many_fields_same_enum`. This test shares an enum
between x0, which is 64 bit, and cpsr, which is 32 bit.
My theory is that when it does `register read x0`, an enum type is
created where the undlerying enumerators are 64 bit, matching the
register size.
Then it does `register read cpsr` which used the cached enum type, but
this register is 32 bit. This caused lldb to try to read an 8 byte value
out of a 4 byte allocation:
READ of size 8 at 0x60200014b874 thread T0
<...>
=>0x60200014b800: fa fa fd fa fa fa fd fa fa fa fd fa fa fa[04]fa
To fix this I've added the register's size in bytes to the constructed
enum type's name. This means that x0 uses:
__lldb_register_fields_enum_some_enum_8
And cpsr uses:
__lldb_register_fields_enum_some_enum_4
If any other registers use this enum and are read, they will use the
cached type as long as their size matches, otherwise we make a new type.
This teaches lldb to parse the enum XML elements sent by lldb-server,
and make use of the information in `register read` and `register info`.
The format is described in
https://sourceware.org/gdb/current/onlinedocs/gdb.html/Enum-Target-Types.html.
The target XML parser will drop any invalid enum or evalue. If we find
multiple evalue for the same value, we will use the last one we find.
The order of evalues from the XML is preserved as there may be good
reason they are not in numerical order.
This change by itself has no measurable effect on the LLDB
testsuite. I'm making it in preparation for threading through more
errors in the Swift language plugin.
Create additional helper functions for the ValueObject class, for:
- returning the value as an APSInt or APFloat
- additional type casting options
- additional ways to create ValueObjects from various types of data
- dereferencing a ValueObject
These helper functions are needed for implementing the Data Inspection
Language, described in
https://discourse.llvm.org/t/rfc-data-inspection-language/69893
