This FORM already has support within LLDB to be parsed as a 16-byte
BLOCK, and all that is left to properly support it in the DWARFParser is
to add it to some enums.
With this, I can debug programs that use libstdc++.so.6.0.33 built with
GCC.
Remove lldb-repro which was used to run the test suite against a
reproducer. The corresponding functionality has been removed from LLDB
so there's no need for the tool anymore.
Member pointers refer to data or function members of a `CXXRecordDecl`,
which require a `MSInheritanceAttr` in order to be complete. Without that
we cannot calculate the size of a member pointer in memory. The attempt
has been causing a crash further down in the clang AST context. In order
to implement the feature, DWARF will need a new attribtue to convey the
information. For the moment, this patch teaches LLDB to handle to
situation and avoid the crash.
Member pointers refer to data or function members of a `CXXRecordDecl` and
require a `MSInheritanceAttr` in order to be complete. Without that we
cannot calculate their size in memory. The attempt has been causing a crash
further down in the clang AST context. In order to implement the feature,
DWARF will need a new attribtue to convey the information. For the moment,
this patch teaches LLDB to handle to situation and avoid the crash.
Follow up to https://github.com/llvm/llvm-project/pull/111902.
Makes sure all the `no_unique_address` tests are in the same place and
we don't rely on the host target triple (which means we don't need to
account for `[[msvc::no_unique_address]]` on Windows).
Now that we don't compile with the host compiler, this patch also adds
`-c` to the compilation command since we don't actually need the linked
binary in the test anyway (and on Darwin linking through Clang requires
the `xcrun` prefix to set up the SDK paths, etc.). We already do this in
`no_unique_address-with-bitfields.cpp` anyway.
Fixed the error `unable to create target: 'No available targets are
compatible with triple "x86_64-apple-macosx10.4.0"'` running `clang
--target=x86_64-apple-macosx -c -gdwarf -o %t %s`.
LLDB code for using the type layout data from DWARF was not kicking in
for types which were initially parsed from a declaration. The problem
was in these lines of code:
```
if (type)
layout_info.bit_size = type->GetByteSize(nullptr).value_or(0) * 8;
```
which determine the types layout size by getting the size from the
lldb_private::Type object. The problem is that if the type object does
not have this information cached, this request can trigger another
(recursive) request to lay out/complete the type. This one, somewhat
surprisingly, succeeds, but does that without the type layout
information (because it hasn't been computed yet). The reasons why this
hasn't been noticed so far are:
- this is a relatively new bug. I haven't checked but I suspect it was
introduced in the "delay type definition search" patchset from this
summer -- if we search for the definition eagerly, we will always have a
cached size value.
- it requires the presence of another bug/issue, as otherwise the
automatically computed layout will match the real thing.
- it reproduces (much) more easily with -flimit-debug-info (though it is
possible to trigger it without that flag).
My fix consists of always fetching type size information from DWARF
(which so far existed as a fallback path). I'm not quite sure why this
code was there in the first place (the code goes back to before the
Great LLDB Reformat), but I don't believe it is necessary, as the type
size (for types parsed from definition DIEs) is set exactly from this
attribute (in ParseStructureLikeDIE).
This allows e.g. DWARFDIE::GetName() to return the name of the type when
looking at its declaration (which contains only
DW_AT_declaration+DW_AT_signature). This is similar to how we recurse
through DW_AT_specification when looking for a function name. Llvm dwarf
parser has obtained the same functionality through #99495.
This fixes a bug where we would confuse a type like NS::Outer::Struct
with NS::Struct (because NS::Outer (and its name) was in a type unit).
We need to resolve the type signature to get a hold of the template
argument dies.
The associated test case passes even without this patch, but it only
does it by accident (because the subsequent code considers the types to
be in an anonymous namespace and this not subject to uniqueing). This
will change once my other patch starts resolving names correctly.
The only change vs. the first version of the patch is that I've made
DWARFUnit linking thread-safe/unit. This was necessary because, during
the
indexing step, two skeleton units could attempt to associate themselves
with the split unit.
The original commit message was:
I ran into this when LTO completely emptied two compile units, so they
ended up with the same hash (see #100375). Although, ideally, the
compiler would try to ensure we don't end up with a hash collision even
in this case, guaranteeing their absence is practically impossible. This
patch ensures this situation does not bring down lldb.
…Type
This is needed to ensure we find a type if its definition is in a CU
that wasn't indexed. This can happen if the definition is in some
precompiled code (e.g. the c++ standard library) which was built with
different flags than the rest of the binary.
I ran into this when LTO completely emptied two compile units, so they
ended up with the same hash (see #100375). Although, ideally, the
compiler would try to ensure we don't end up with a hash collision even
in this case, guaranteeing their absence is practically impossible. This
patch ensures this situation does not bring down lldb.
This fixes a regression caused by delayed type definition searching
(#96755 and friends): If we end up adding a member (e.g. a typedef) to a
type that we've already attempted to complete (and failed), the
resulting AST would end up inconsistent (we would start to "forcibly"
complete it, but never finish it), and importing it into an expression
AST would crash.
This patch fixes this by detecting the situation and finishing the
definition as well.
This is an alternative, much simpler implementation of #99305. In this
version I replace the AnyModule wildcard match with a special TypeQuery
flag which achieves (mostly) the same thing.
It is a preparatory step for teaching ContextMatches about anonymous
namespaces. It started out as a way to remove the assumption that the
pattern and target contexts must be of the same length -- that's will
not be correct with anonymous namespaces, and probably isn't even
correct right now for AnyModule matches.
Use `--match-full-lines` with FileCheck. Otherwise, the checks for `int`
and `unsigned int` will match to the fields inside two `CustomType`s and
FileCheck will start scanning from there, causing string not found
error.
This reverts commit 927def4972.
I've refactored the tests so that we're explicit about whether the
enum is signed or not. Which means we use the proper types
throughout.
Fixes#97514
Given this example:
```
enum E {};
int main()
{
E x = E(0);
E y = E(1);
E z = E(2);
return 0;
}
```
lldb used to print nothing for `x`, but `0x1` for `y` and `0x2` for `z`.
At first this seemed like the 0 case needed fixing but the real issue
here is that en enum with no enumerators was being detected as a
"bitfield like enum".
Which is an enum where all enumerators are a single bit value, or the
sum of previous single bit values.
For these we do not print anything for a value of 0, as we assume it
must be the remainder after we've printed the other bits that were set
(I think this is also unfortunate, but I'm not addressing that here).
Clearly an enum with no enumerators cannot be being used as a bitfield,
so check that up front and print it as if it's a normal enum where we
didn't match any of the enumerators. This means you now get:
```
(lldb) p x
(E) 0
(lldb) p y
(E) 1
(lldb) p z
(E) 2
```
Which is a change to decimal from hex, but I think it's overall more
consistent. Printing hex here was never a concious decision.
When we check for the "struct CustomType" in the NODWP, we can just make
sure that we have both types showing up, the next tests will validate
the types are correct. Also added a "-DAG" to the integer and float
types. This should fix the flakiness in this test.
This patch adds support for the new foreign type unit support in
.debug_names. Features include:
- don't manually index foreign TUs if we have info for them
- only use the type unit entries that match the .dwo files when we have
a .dwp file
- fix type unit lookups for .dwo files
- fix crashers that happen due to PeekDIEName() using wrong offsets where an entry had DW_IDX_comp_unit and DW_IDX_type_unit entries and when we had no type unit support, it would cause us to think it was a normal DIE in .debug_info from the main executable.
---------
Co-authored-by: paperchalice <liujunchang97@outlook.com>
Our dwarf parsing code treats structures and classes as interchangable.
CompilerContextKind is used when looking DIEs for types. This makes sure
we always they're treated the same way.
See also
[#95905#discussion_r1645686628](https://github.com/llvm/llvm-project/pull/95905#discussion_r1645686628).
This change by itself has no measurable effect on the LLDB
testsuite. I'm making it in preparation for threading through more
errors in the Swift language plugin.
With simple template names the template arguments aren't embedded in the
DW_AT_name attribute of the type. The code in
FindDefinitionTypeForDWARFDeclContext was comparing the synthesized
template arguments on the leaf (most deeply nested) DIE, but was not
sufficient, as the difference get be at any level above that
(Foo<T>::Bar vs. Foo<U>::Bar). This patch makes sure we compare the
entire context.
As a drive-by I also remove the completely unnecessary
ConstStringification of the GetDIEClassTemplateParams result.
This makes sure we try to process declaration DIEs that are erroneously
present in the index. Until bd5c6367bd, clang was emitting index
entries for declaration DIEs with DW_AT_signature attributes. This makes
sure to avoid returning those DIEs as the definitions of a type, but
also makes sure to pass through DIEs referring to static constexpr
member variables, which is a (probably nonconforming) extension used by
dsymutil.
It adds test cases for both of the scenarios. It is essentially a
recommit of #91808.
We currently cannot represent abbreviation codes with more than 16 bits,
and we were lldb-asserting if we ever ran into one. While I haven't seen
any real DWARF with these kinds of abbreviations, it is possible to hit
this with handcrafted evil dwarf, due some sort of corruptions, or just
bugs (the addition of PeekDIEName makes these bugs more likely, as the
function blindly dereferences offsets within the debug info section) .
Missing abbreviations were already reporting an error. This patch turns
sure that large abbreviations into an error as well, and adds a test for
both cases.
Dwarf 5 says "There is no requirement that the entries be ordered in any
particular way" in 2.17.3 Non-Contiguous Address Ranges for rnglist.
Some places assume the ranges are already sorted but it's not.
For example, when [parsing function
info](bc8a427620/lldb/source/Plugins/SymbolFile/DWARF/SymbolFileDWARF.cpp (L922-L927)),
it validates low and hi address of the function: GetMinRangeBase returns
the first range entry base and GetMaxRangeEnd returns the last range
end. If low >= hi, it stops parsing this function. This causes missing
inline stack frames for those functions.
This change fixes it and updates the test
`lldb/test/Shell/SymbolFile/DWARF/x86/debug_rnglists.s` so that two
ranges in `.debug_rnglists` are out of order and `image lookup -v -s
lookup_rnglists` is still able to produce sorted ranges for the inner
block.
Test that ld.lld --debug-names (#86508) built per-module index can be
consumed by lldb. This has uncovered a bug during the development of the
lld feature.
DWP files don't usually have a GNU build ID built into them. When
searching for a .dwp file, don't require a UUID to be in the .dwp file.
The debug info search information was checking for a UUID in the .dwp
file when debug info search paths were being used. This is now fixed by
not specifying the UUID in the ModuleSpec being used for the .dwp file
search.
When using split DWARF we can run into many different ways to store
debug info:
- lldb loads `<exe>` which contains skeleton DWARF and needs to find
`<exe>.dwp`
- lldb loads `<exe>` which is stripped but has .gnu_debuglink pointing
to `<exe>.debug` with skeleton DWARF and needs to find `<exe>.dwp`
- lldb loads `<exe>` which is stripped but has .gnu_debuglink pointing
to `<exe>.debug` with skeleton DWARF and needs to find `<exe>.debug.dwp`
- lldb loads `<exe>.debug` and needs to find `<exe>.dwp`
Previously we only handled the first two cases. This patch adds support
for the latter two.
When using split DWARF with .dwp files we had an issue where sometimes
the DWO file within the .dwp file would be parsed _before_ the skeleton
compile unit. The DWO file expects to be able to always be able to get a
link back to the skeleton compile unit. Prior to this fix, the only time
the skeleton compile unit backlink would get set, was if the unit
headers for the main executable have been parsed _and_ if the unit DIE
was parsed in that DWARFUnit. This patch ensures that we can always get
the skeleton compile unit for a DWO file by adding a function:
```
DWARFCompileUnit *DWARFUnit::GetSkeletonUnit();
```
Prior to this fix DWARFUnit had some unsafe accessors that were used to
store two different things:
```
void *DWARFUnit::GetUserData() const;
void DWARFUnit::SetUserData(void *d);
```
This was used by SymbolFileDWARF to cache the `lldb_private::CompileUnit
*` for a SymbolFileDWARF and was also used to store the `DWARFUnit *`
for SymbolFileDWARFDwo. This patch clears up this unsafe usage by adding
two separate accessors and ivars for this:
```
lldb_private::CompileUnit *DWARFUnit::GetLLDBCompUnit() const { return m_lldb_cu; }
void DWARFUnit::SetLLDBCompUnit(lldb_private::CompileUnit *cu) { m_lldb_cu = cu; }
DWARFCompileUnit *DWARFUnit::GetSkeletonUnit();
void DWARFUnit::SetSkeletonUnit(DWARFUnit *skeleton_unit);
```
This will stop anyone from calling `void *DWARFUnit::GetUserData()
const;` and casting the value to an incorrect value.
A crash could occur in `SymbolFileDWARF::GetCompUnitForDWARFCompUnit()`
when the `non_dwo_cu`, which is a backlink to the skeleton compile unit,
was not set and was NULL. There is an assert() in the code, and then the
code just will kill the program if the assert isn't enabled because the
code looked like:
```
if (dwarf_cu.IsDWOUnit()) {
DWARFCompileUnit *non_dwo_cu =
static_cast<DWARFCompileUnit *>(dwarf_cu.GetUserData());
assert(non_dwo_cu);
return non_dwo_cu->GetSymbolFileDWARF().GetCompUnitForDWARFCompUnit(
*non_dwo_cu);
}
```
This is now fixed by calling the `DWARFUnit::GetSkeletonUnit()` which
will correctly always get the skeleton compile uint for a DWO file
regardless of if the skeleton unit headers have been parse or if the
skeleton unit DIE wasn't parsed yet.
To implement the ability to get the skeleton compile units, I added code
the DWARFDebugInfo.cpp/.h that make a map of DWO ID -> skeleton
DWARFUnit * that gets filled in for DWARF5 when the unit headers are
parsed. The `DWARFUnit::GetSkeletonUnit()` will end up parsing the unit
headers of the main executable to fill in this map if it already hasn't
been done. For DWARF4 and earlier we maintain a separate map that gets
filled in only for any DWARF4 compile units that have a DW_AT_dwo_id or
DW_AT_gnu_dwo_id attributes. This is more expensive, so this is done
lazily and in a thread safe manor. This allows us to be as efficient as
possible when using DWARF5 and also be backward compatible with DWARF4 +
split DWARF.
There was also an issue that stopped type lookups from succeeding in
`DWARFDIE SymbolFileDWARF::GetDIE(const DIERef &die_ref)` where it
directly was accessing the `m_dwp_symfile` ivar without calling the
accessor function that could end up needing to locate and load the .dwp
file. This was fixed by calling the
`SymbolFileDWARF::GetDwpSymbolFile()` accessor to ensure we always get a
valid value back if we can find the .dwp file. Prior to this fix it was
down which APIs were called and if any APIs were called that loaded the
.dwp file, it worked fine, but it might not if no APIs were called that
did cause it to get loaded.
When we have valid debug info indexes and when the lldb index cache was
enabled, this would cause this issue to show up more often.
I modified an existing test case to test that all of this works
correctly and doesn't crash.
…ntext
Following the specification chain seems to be clearly the expected
behavior of GetDeclContext(). Otherwise C++ methods have an empty
CompilerContext instead of being nested in their struct/class.
Theprimary motivation for this functionality is the Swift plugin. In
order to test the change I added a proof-of-concept implementation of a
Module::FindFunction() variant that takes a CompilerContext, expesed via
lldb-test.
rdar://120553412
This is a follow up patch after .debug_names can now emit local type
unit entries when we compile with type units + DWARF5 + .debug_names.
The pull request that added this functionality was:
https://github.com/llvm/llvm-project/pull/70515
This patch makes sure that the DebugNamesDWARFIndex in LLDB will not
manually need to parse type units if they have a valid index. It also
fixes the index to be able to correctly extract name entries that
reference type unit DIEs. Added a test to verify things work as
expected.
This patch resolves an issue that currently accounts for the vast
majority of failures on the matrix bot.
Differential Revision: https://reviews.llvm.org/D152872
This patch resolves an issue where a value
is incorrectly displayed if it is represented
by DW_OP_div.
This issue is caused by lldb evaluating
operands of DW_OP_div as unsigned
and performed unintended unsigned
division.
This issue is resolved by creating two
temporary signed scalar and performing
signed division.
(Addresses GH#61727)
Differential Revision: https://reviews.llvm.org/D147370
