This patch emits DBG_INSTR_REFs for two remaining flavours of variable
locations that weren't supported: copies, and inter-block VRegs. There are
still some locations that must be represented by DBG_VALUE such as
constants, but they're mostly independent of optimisations.
For variable locations that refer to values defined in different blocks,
vregs are allocated before isel begins, but the defining instruction
might not exist until late in isel. To get around this, emit
DBG_INSTR_REFs in a "half done" state, where the first operand refers to a
VReg. Then at the end of isel, patch these back up to refer to
instructions, using the finalizeDebugInstrRefs method.
Copies are something that I complained about the original RFC, and I
really don't want to have to put instruction numbers on copies. They don't
define a value: they move them. To address this isel, salvageCopySSA
interprets:
* COPYs,
* SUBREG_TO_REG,
* Anything that isCopyInstr thinks is a copy.
And follows chains of copies back to the defining instruction that they
read from. This relies on any physical registers that COPYs read being
defined in the same block, or being entry-block arguments. For the former
we can put an instruction number on the defining instruction; for the
latter we can drop a DBG_PHI that reads the incoming value.
Differential Revision: https://reviews.llvm.org/D88896
This patch fixes an issue which occurred in CodeGenPrepare and
HWAddressSanitizer, which both at some point create a map of Old->New
instructions and update dbg.value uses of these. They did this by
iterating over the dbg.value's location operands, and if an instance of
the old instruction was found, replaceVariableLocationOp would be
called on that dbg.value. This would cause an error if the same operand
appeared multiple times as a location operand, as the first call to
replaceVariableLocationOp would update all uses of the old instruction,
invalidating the old iterator and eventually hitting an assertion.
This has been fixed by no longer iterating over the dbg.value's location
operands directly, but by first collecting them into a set and then
iterating over that, ensuring that we never attempt to replace a
duplicated operand multiple times.
Differential Revision: https://reviews.llvm.org/D105129
This reverts commit 8cd35ad854.
It breaks `TestMembersAndLocalsWithSameName.py` on GreenDragon and
Mikael Holmén points out in D104827 that bitcode files created with the
patch cannot be parsed with binaries built before it.
We're trying to match a few pointer computation patterns here for
re-association opportunities.
1) Isolating a constant operand to be on the RHS, e.g.:
G_PTR_ADD(BASE, G_ADD(X, C)) -> G_PTR_ADD(G_PTR_ADD(BASE, X), C)
2) Folding two constants in each sub-tree as long as such folding
doesn't break a legal addressing mode.
G_PTR_ADD(G_PTR_ADD(BASE, C1), C2) -> G_PTR_ADD(BASE, C1+C2)
AArch64 code size improvements on CTMark with -Os:
Program before after diff
pairlocalalign 251048 251044 -0.0%
consumer-typeset 421820 421812 -0.0%
kc 431348 431320 -0.0%
SPASS 413404 413300 -0.0%
clamscan 384396 384220 -0.0%
tramp3d-v4 370640 370412 -0.1%
lencod 432096 431772 -0.1%
bullet 479400 478796 -0.1%
sqlite3 288504 288072 -0.1%
7zip-benchmark 573796 570768 -0.5%
Geomean difference -0.1%
Differential Revision: https://reviews.llvm.org/D105069
Add a flag so that target can choose to use AsmParser for parsing inline asm.
And set the flag by default for AIX.
-no-intergrated-as will override this default if specified explicitly.
Reviewed By: #powerpc, shchenz
Differential Revision: https://reviews.llvm.org/D105314
Fixes bugs [[ https://bugs.llvm.org/show_bug.cgi?id=50580 | 50580 ]] and [[ https://bugs.llvm.org/show_bug.cgi?id=49446 | 49446 ]]
When compiling with -g "DBG_VALUE <reg>" instructions are added in the MIR, if such a instruction is inserted between instructions that use <reg> then MachineCopyPropagation invalidates <reg> , this causes some copies to not be propagated and causes differences in code generation (ex bugs 50580 and 49446 ). DBG_VALUE instructions should be ignored since they don't actually modify the register.
Reviewed By: lkail
Differential Revision: https://reviews.llvm.org/D104394
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
Previously we used the vector type, but we're loading/storing
invididual elements so I think only element alignment should matter.
Noticed while looking at the code for something else so I don't
have a test case.
Differential Revision: https://reviews.llvm.org/D105220
In `IRTranslator::translateGetElementPtr`, when we run into a vector gep with
some scalar operands, we try to normalize those operands using
`buildSplatVector`.
This is fine except for when the getelementptr has a <1 x N> type. In that case
it is treated as a scalar. If we run into one of these then every call to
```
// With VectorWidth = 1
LLT::fixed_vector(VectorWidth, PtrTy)
```
will assert.
Here's an example (equivalent to the added testcase):
https://godbolt.org/z/hGsTnMYdW
To get around this, this patch adds a variable, `WantSplatVector`, which
is true when our vector type ought to actually be represented using a vector.
When it's false, we'll translate as a scalar. This checks if `VectorWidth > 1`.
This fixes this bug:
https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=35496
Differential Revision: https://reviews.llvm.org/D105316
Inserting into a smaller-than-legal scalable vector would result in an
internal compiler error. For example, inserting a <vscale x 4 x i8> into
a <vscale x 8 x i8> (both illegal vector types for SVE) would cause a
crash.
This crash was happening because there was no code to promote (legalise)
the result of an INSERT_SUBVECTOR node.
This patch implements PromoteIntRes_INSERT_SUBVECTOR, which legalises
the ISD node. This is currently done by going through memory. This is
necessary because of the requirement that the SubVec parameter of the
INSERT_SUBVECTOR node must be smaller than the Vec parameter, which
means that INSERT_SUBVECTOR cannot always have a legal result/operand
types.
Co-Authored-by: Joe Ellis <joe.ellis@arm.com>
Differential Revision: https://reviews.llvm.org/D102766
Added in 47c3fe2a22, we sometimes need to describe a variable value
substitution with a subregister qualifier, to say that "the value is the
lower 32 bits of this 64 bit register def" for example. That then needs
support during LiveDebugValues to interpret the subregister qualifiers,
which is what this patch adds.
Whenever we encounter a DBG_INSTR_REF and find its value by using a
substitution, collect any subregister qualifiers seen. Then, accumulate the
effects of the qualifiers to work out what offset and what size should be
extracted from the defined register. Finally, for the target ValueIDNum,
extract whatever subregister is in the correct position
Currently, describing a subregister field of a larger value that has been
spilt to the stack, is unimplemented.
Differential Revision: https://reviews.llvm.org/D88894
Since gather lowering can now lower to nodes that may need expansion via
the vector legalizer, do MGATHER lowering via vector legalizer.
Additionally, as part of adding passthru support for fixed typed
gathers, fix passthru support for scalable types.
Depends on D104910
Differential Revision: https://reviews.llvm.org/D104217
Very late in compilation, backends like X86 will perform optimisations like
this:
$cx = MOV16rm $rax, ...
->
$rcx = MOV64rm $rax, ...
Widening the load from 16 bits to 64 bits. SEeing how the lower 16 bits
remain the same, this doesn't affect execution. However, any debug
instruction reference to the defined operand now refers to a 64 bit value,
nto a 16 bit one, which might be unexpected. Elsewhere in codegen, there's
often this pattern:
CALL64pcrel32 @foo, implicit-def $rax
%0:gr64 = COPY $rax
%1:gr32 = COPY %0.sub_32bit
Where we want to refer to the definition of $eax by the call, but don't
want to refer the copies (they don't define values in the way
LiveDebugValues sees it). To solve this, add a subregister field to the
existing "substitutions" facility, so that we can describe a field within
a larger value definition. I would imagine that this would be used most
often when a value is widened, and we need to refer to the original,
narrower definition.
Differential Revision: https://reviews.llvm.org/D88891
This patch changes return type of tryCandidate from void to bool:
1. Methods in some targets already follow this convention.
2. This would help if some target wants to re-use generic code.
3. It looks more intuitive if these try-method returns the same type.
We may need to change return type of them from bool to some enum
further, to make it less confusing.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D103951
This patch adds support to the instruction-referencing LiveDebugValues
implementation for emitting entry values. The instruction referencing
implementations tracking by value rather than location means that we can
get around two of the issues with VarLocs. DBG_VALUE instructions that
re-assign the same value to a variable are no longer a problem, because we
can "see through" to the value being assigned. We also don't need to do
anything special during the dataflow stages: the "variable value problem"
doesn't need to know whether a value is available most of the time, and the
times it deoes need to know are always when entry values need to be
terminated.
The patch modifies the "TransferTracker" class, adding methods to identify
when a variable ias an entry value candidate, and when a machine value is
an entry value. recoverAsEntryValue tests these two things and emits an
entry-value expression if they're true. It's used when we clobber or
otherwise lose a value and can't find a replacement location for the value
it contained.
Differential Revision: https://reviews.llvm.org/D88406
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
Previously we didn't preserve the memory type and had to blindly
interpret a number of bytes. Now that non-byte memory accesses are
representable, we can handle these correctly.
Ported from DAG version (minus some weird special case i1 legality
checking which I don't fully understand, and we don't have a way to
query for)
For now, this is NFC and the test changes are placeholders. Since the
legality queries are still relying on byte-flattened memory sizes, the
legalizer can't actually see these non-byte accesses. This keeps this
change self contained without merging it with the larger patch to
switch to LLT memory queries.
This will currently accept the old number of bytes syntax, and convert
it to a scalar. This should be removed in the near future (I think I
converted all of the tests already, but likely missed a few).
Not sure what the exact syntax and policy should be. We can continue
printing the number of bytes for non-generic instructions to avoid
test churn and only allow non-scalar types for generic instructions.
This will currently print the LLT in parentheses, but accept parsing
the existing integers and implicitly converting to scalar. The
parentheses are a bit ugly, but the parser logic seems unable to deal
without either parentheses or some keyword to indicate the start of a
type.
In various circumstances, when we clobber a register there may be
alternative locations that the value is live in. The classic example would
be a value loaded from the stack, and then clobbered: the value is still
available on the stack. InstrRefBasedLDV was coping with this at block
starts where it's forced to pick a location, however it wasn't searching
for alternative locations when values were clobbered.
This patch notifies the "Transfer Tracker" object when clobbers occur, and
it's able to find alternatives and issue DBG_VALUEs for that location. See:
the added test.
Differential Revision: https://reviews.llvm.org/D88405
When clamping the index for a memory access to a stacked vector we must
take into account the entire type being accessed, not just assume that
we are accessing only a single element.
Differential Revision: https://reviews.llvm.org/D105016
GlobalISel is relying on regular MachineMemOperands to track all of
the memory properties of accesses. Just the raw byte size is
insufficent to disambiguate all situations. For example, if we need to
split an unaligned extending load, we need to know the number of bits
in the original source value and can't infer it from the result
type. This is also a problem for extending vector loads.
This does decrease the maximum representable size from the full
uint64_t bytes to a maximum of 16-bits. No in tree testcases hit this,
other than places using UINT64_MAX for unknown sizes. This may be an
issue for G_MEMCPY and co., although they can just use unknown size
for large static sizes. This also has potential for backend abuse by
relying on the type when it really shouldn't be relevant after
selection.
This does not include the necessary MIR printer/parser changes to
represent this.
We were trying to expand these if they were going to be expanded
in op legalization so that we generated the minimum number of
operations. We failed to take into account that NVT could be
promoted to another legal type in op legalization.
Hoping this fixes the issue on the VE target reported as a follow
up to D96681. The check line changes were taken from before
1e46b6f401 so this patch does
appear to improve some cases that had previously regressed.
This patch reads machine value numbers from DBG_PHI instructions (marking
where SSA PHIs used to be), and matches them up with DBG_INSTR_REF
instructions that refer to them. Essentially they are two separate parts of
a DBG_VALUE: the place to read the value (register and program position),
and where the variable is assigned that value.
Sometimes these DBG_PHIs can be duplicated, usually by tail duplication.
This corresponds to the SSA structure of the program being destroyed, and
the original PHI being split. When this happens: run LLVMs standard
SSAUpdater utility, to work out what values should appear in which blocks.
The majority of this patch is boilerplate to make use of SSAUpdater.
If there are any additional PHIs on the path between multiple DBG_PHIs and
their using DBG_INSTR_REF, their existance is validated, just in case a
value gets clobbered along the way (see dbg-phis-with-loops.mir for
several examples).
Differential Revision: https://reviews.llvm.org/D86814
- Add standalone metadata parsing support so that machine metadata nodes
could be populated before and accessed during MIR is parsed.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103282
Add UNIQUED and DISTINCT properties in Metadata.def and use them to
implement restrictions on the `distinct` property of MDNodes:
* DIExpression can currently be parsed from IR or read from bitcode
as `distinct`, but this property is silently dropped when printing
to IR. This causes accepted IR to fail to round-trip. As DIExpression
appears inline at each use in the canonical form of IR, it cannot
actually be `distinct` anyway, as there is no syntax to describe it.
* Similarly, DIArgList is conceptually always uniqued. It is currently
restricted to only appearing in contexts where there is no syntax for
`distinct`, but for consistency it is treated equivalently to
DIExpression in this patch.
* DICompileUnit is already restricted to always being `distinct`, but
along with adding general support for the inverse restriction I went
ahead and described this in Metadata.def and updated the parser to be
general. Future nodes which have this restriction can share this
support.
The new UNIQUED property applies to DIExpression and DIArgList, and
forbids them to be `distinct`. It also implies they are canonically
printed inline at each use, rather than via MDNode ID.
The new DISTINCT property applies to DICompileUnit, and requires it to
be `distinct`.
A potential alternative change is to forbid the non-inline syntax for
DIExpression entirely, as is done with DIArgList implicitly by requiring
it appear in the context of a function. For example, we would forbid:
!named = !{!0}
!0 = !DIExpression()
Instead we would only accept the equivalent inlined version:
!named = !{!DIExpression()}
This essentially removes the ability to create a `distinct` DIExpression
by construction, as there is no syntax for `distinct` inline. If this
patch is accepted as-is, the result would be that the non-canonical
version is accepted, but the following would be an error and produce a diagnostic:
!named = !{!0}
; error: 'distinct' not allowed for !DIExpression()
!0 = distinct !DIExpression()
Also update some documentation to consistently use the inline syntax for
DIExpression, and to describe the restrictions on `distinct` for nodes
where applicable.
Reviewed By: StephenTozer, t-tye
Differential Revision: https://reviews.llvm.org/D104827
This intrinsic blocks floating point transformations by the optimizer.
Author: Pengfei
Reviewed By: LuoYuanke, Andy Kaylor, Craig Topper, kpn
Differential Revision: https://reviews.llvm.org/D99675
This patch relands https://reviews.llvm.org/D104454, but fixes some failing
builds on Mac OS which apparently has a different definition for size_t,
that caused 'ambiguous operator overload' for the implicit conversion
of TypeSize to a scalar value.
This reverts commit b732e6c9a8.
Peephole optimizer should not be introducing sub-reg definitions
as they are illegal in machine SSA phase. This patch modifies
the optimizer to not emit sub-register definitions.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D103408
Adds legalizer, register bank select, and instruction
select support for G_SBFX and G_UBFX. These opcodes generate
scalar or vector ALU bitfield extract instructions for
AMDGPU. The instructions allow both constant or register
values for the offset and width operands.
The 32-bit scalar version is expanded to a sequence that
combines the offset and width into a single register.
There are no 64-bit vgpr bitfield extract instructions, so the
operations are expanded to a sequence of instructions that
implement the operation. If the width is a constant,
then the 32-bit bitfield extract instructions are used.
Moved the AArch64 specific code for creating G_SBFX to
CombinerHelper.cpp so that it can be used by other targets.
Only bitfield extracts with constant offset and width values
are handled currently.
Differential Revision: https://reviews.llvm.org/D100149
A combination of features ^ that lead to a mismatch of expectations
about how a subprogram definition DIE would be produced with/without a
declaration when taking full -g debug info and inlining it into a -gmlt
CU - specifically when using Split DWARF that doesn't support cross-CU
references, so we have to put the -g debug info into the -gmlt CU, which
gets confusing about which mode is respected.
This patch comes down on respecting the CU the debug info is emitted
into, rather than preserving the full debug info when it's emitted into
the gmlt CU.
This ports the AArch64 SABD and USBD over to DAG Combine, where they can be
used by more backends (notably MVE in a follow-up patch). The matching code
has changed very little, just to handle legal operations and types
differently. It selects from (ABS (SUB (EXTEND a), (EXTEND b))), producing
a ubds/abdu which is zexted to the original type.
Differential Revision: https://reviews.llvm.org/D91937
This add as a fold of sub(0, splat(sub(0, x))) -> splat(x). This can
come up in the lowering of right shifts under AArch64, where we generate
a shift left of a negated number.
Differential Revision: https://reviews.llvm.org/D103755
This change is NFC upstream. We pass in the loop's block to the kernel
rewriter explicitly, instead of assuming it's the loop's top block. This
change is made for downstream targets where this assumption doesn't hold.
Differential Revision: https://reviews.llvm.org/D104811
To reflect that the size may be scalable, a TypeSize is returned
instead of an unsigned. In places where the result is used,
it currently relies on an implicit cast of TypeSize -> uint64_t,
which asserts that the type is not scalable.
This patch is NFC for fixed-width vectors.
Reviewed By: aemerson
Differential Revision: https://reviews.llvm.org/D104454
