Follow-up to #69422.
This PR puts all the highlighting settings into a single struct for
easier handling
Co-authored-by: Talha Tahir <talha.tahir@10xengineers.ai>
This fixes:
```
[6083/7449] Building CXX object tools\lldb\source\Commands\CMakeFiles\lldbCommands.dir\CommandObjectFrame.cpp.obj
C:\git\llvm-project\lldb\source\Commands\CommandObjectFrame.cpp(497) : warning C4715: 'CommandObjectFrameVariable::ScopeRequested': not all control paths return a value
```
Store a SupportFile, rather than a FileSpec, in LineEntry. This commit
works towards having the SourceManageroperate on SupportFiles so that it
can (1) validate the Checksum and (2) materialize the content of inline
source information.
BreakpointIDList does not need to know about CommandReturnObject.
BreakpointIDList::FindAndReplaceIDRanges is the last place that uses it
in BreakpointIDList.
Instead of passing in a CommandReturnObject, it now returns an
llvm::Error. The callsite uses the Error to populate the
CommandReturnObject as needed.
This abstraction is leaky and BreakpointIDList does not need to know
about CommandReturnObject.
Additionally, setting the CommandReturnObject inout param to a success
state does very little. The function returns immediately if the input
ArrayRef is empty, and reading
CommandObjectMultiwordBreakpoint::VerifyIDs more closely, the input is
always empty if the previous call to
BreakpointIDList::FindAndReplaceIDRanges failed. If the call was
successful, then the CommandReturnObject is already in a success state.
I have opted to remove the function altogether and inline the
functionality where it was used.
LLVM supports DWARF 5 linetable extension to store source files inline
in DWARF. This is particularly useful for compiler-generated source
code. This implementation tries to materialize them as temporary files
lazily, so SBAPI clients don't need to be aware of them.
rdar://110926168
This patch replaces uses of StringRef::{starts,ends}with with
StringRef::{starts,ends}_with for consistency with
std::{string,string_view}::{starts,ends}_with in C++20.
I'm planning to deprecate and eventually remove
StringRef::{starts,ends}with.
This patch revives the effort to get this Phabricator patch into
upstream:
https://reviews.llvm.org/D137900
This patch was accepted before in Phabricator but I found some
-gsimple-template-names issues that are fixed in this patch.
A fixed up version of the description from the original patch starts
now.
This patch started off trying to fix Module::FindFirstType() as it
sometimes didn't work. The issue was the SymbolFile plug-ins didn't do
any filtering of the matching types they produced, and they only looked
up types using the type basename. This means if you have two types with
the same basename, your type lookup can fail when only looking up a
single type. We would ask the Module::FindFirstType to lookup "Foo::Bar"
and it would ask the symbol file to find only 1 type matching the
basename "Bar", and then we would filter out any matches that didn't
match "Foo::Bar". So if the SymbolFile found "Foo::Bar" first, then it
would work, but if it found "Baz::Bar" first, it would return only that
type and it would be filtered out.
Discovering this issue lead me to think of the patch Alex Langford did a
few months ago that was done for finding functions, where he allowed
SymbolFile objects to make sure something fully matched before parsing
the debug information into an AST type and other LLDB types. So this
patch aimed to allow type lookups to also be much more efficient.
As LLDB has been developed over the years, we added more ways to to type
lookups. These functions have lots of arguments. This patch aims to make
one API that needs to be implemented that serves all previous lookups:
- Find a single type
- Find all types
- Find types in a namespace
This patch introduces a `TypeQuery` class that contains all of the state
needed to perform the lookup which is powerful enough to perform all of
the type searches that used to be in our API. It contain a vector of
CompilerContext objects that can fully or partially specify the lookup
that needs to take place.
If you just want to lookup all types with a matching basename,
regardless of the containing context, you can specify just a single
CompilerContext entry that has a name and a CompilerContextKind mask of
CompilerContextKind::AnyType.
Or you can fully specify the exact context to use when doing lookups
like: CompilerContextKind::Namespace "std"
CompilerContextKind::Class "foo"
CompilerContextKind::Typedef "size_type"
This change expands on the clang modules code that already used a
vector<CompilerContext> items, but it modifies it to work with
expression type lookups which have contexts, or user lookups where users
query for types. The clang modules type lookup is still an option that
can be enabled on the `TypeQuery` objects.
This mirrors the most recent addition of type lookups that took a
vector<CompilerContext> that allowed lookups to happen for the
expression parser in certain places.
Prior to this we had the following APIs in Module:
```
void
Module::FindTypes(ConstString type_name, bool exact_match, size_t max_matches,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeList &types);
void
Module::FindTypes(llvm::ArrayRef<CompilerContext> pattern, LanguageSet languages,
llvm::DenseSet<lldb_private::SymbolFile *> &searched_symbol_files,
TypeMap &types);
void Module::FindTypesInNamespace(ConstString type_name,
const CompilerDeclContext &parent_decl_ctx,
size_t max_matches, TypeList &type_list);
```
The new Module API is much simpler. It gets rid of all three above
functions and replaces them with:
```
void FindTypes(const TypeQuery &query, TypeResults &results);
```
The `TypeQuery` class contains all of the needed settings:
- The vector<CompilerContext> that allow efficient lookups in the symbol
file classes since they can look at basename matches only realize fully
matching types. Before this any basename that matched was fully realized
only to be removed later by code outside of the SymbolFile layer which
could cause many types to be realized when they didn't need to.
- If the lookup is exact or not. If not exact, then the compiler context
must match the bottom most items that match the compiler context,
otherwise it must match exactly
- If the compiler context match is for clang modules or not. Clang
modules matches include a Module compiler context kind that allows types
to be matched only from certain modules and these matches are not needed
when d oing user type lookups.
- An optional list of languages to use to limit the search to only
certain languages
The `TypeResults` object contains all state required to do the lookup
and store the results:
- The max number of matches
- The set of SymbolFile objects that have already been searched
- The matching type list for any matches that are found
The benefits of this approach are:
- Simpler API, and only one API to implement in SymbolFile classes
- Replaces the FindTypesInNamespace that used a CompilerDeclContext as a
way to limit the search, but this only worked if the TypeSystem matched
the current symbol file's type system, so you couldn't use it to lookup
a type in another module
- Fixes a serious bug in our FindFirstType functions where if we were
searching for "foo::bar", and we found a "baz::bar" first, the basename
would match and we would only fetch 1 type using the basename, only to
drop it from the matching list and returning no results
This patch renames {starts,ends}with to {starts,ends}_with for
consistency with std::{string,string_view}::{starts,ends}_with in
C++20. Since there are only a handful of occurrences, this patch
skips the deprecation phase and simply renames them.
Fixes https://github.com/llvm/llvm-project/issues/57372
Previously some work has already been done on this. A PR was generated
but it remained in review:
https://reviews.llvm.org/D136462
In short previous approach was following:
Changing the symbol names (making the searched part colorized) ->
printing them -> restoring the symbol names back in their original form.
The reviewers suggested that instead of changing the symbol table, this
colorization should be done in the dump functions itself. Our strategy
involves passing the searched regex pattern to the existing dump
functions responsible for printing information about the searched
symbol. This pattern is propagated until it reaches the line in the dump
functions responsible for displaying symbol information on screen.
At this point, we've introduced a new function called
"PutCStringColorHighlighted," which takes the searched pattern, a prefix and suffix,
and the text and applies colorization to highlight the pattern in the
output. This approach aims to streamline the symbol search process to
improve readability of search results.
Co-authored-by: José L. Junior <josejunior@10xengineers.ai>
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
(cherry picked from commit fc6b72523f)
This patch is rearranging code a bit to add WatchpointResources to
Process. A WatchpointResource is meant to represent a hardware
watchpoint register in the inferior process. It has an address, a size,
a type, and a list of Watchpoints that are using this
WatchpointResource.
This current patch doesn't add any of the features of
WatchpointResources that make them interesting -- a user asking to watch
a 24 byte object could watch this with three 8 byte WatchpointResources.
Or a Watchpoint on 1 byte at 0x1002 and a second watchpoint on 1 byte at
0x1003, these must both be served by a single WatchpointResource on that
doubleword at 0x1000 on a 64-bit target, if two hardware watchpoint
registers were used to track these separately, one of them may not be
hit. Or if you have one Watchpoint on a variable with a condition set,
and another Watchpoint on that same variable with a command defined or
different condition, or ignorecount, both of those Watchpoints need to
evaluate their criteria/commands when their WatchpointResource has been
hit.
There's a bit of code movement to rearrange things in the direction I'll
need for implementing this feature, so I want to start with reviewing &
landing this mostly NFC patch and we can focus on the algorithmic
choices about how WatchpointResources are shared and handled as they're
triggeed, separately.
This patch also stops printing "Watchpoint <n> hit: old value: <x>, new
vlaue: <y>" for Read watchpoints. I could make an argument for print
"Watchpoint <n> hit: current value <x>" but the current output doesn't
make any sense, and the user can print the value if they are
particularly interested. Read watchpoints are used primarily to
understand what code is reading a variable.
This patch adds more fallbacks for how to print the objects being
watched if we have types, instead of assuming they are all integral
values, so a struct will print its elements. As large watchpoints are
added, we'll be doing a lot more of those.
To track the WatchpointSP in the WatchpointResources, I changed the
internal API which took a WatchpointSP and devolved it to a Watchpoint*,
which meant touching several different Process files. I removed the
watchpoint code in ProcessKDP which only reported that watchpoints
aren't supported, the base class does that already.
I haven't yet changed how we receive a watchpoint to identify the
WatchpointResource responsible for the trigger, and identify all
Watchpoints that are using this Resource to evaluate their conditions
etc. This is the same work that a BreakpointSite needs to do when it has
been tiggered, where multiple Breakpoints may be at the same address.
There is not yet any printing of the Resources that a Watchpoint is
implemented in terms of ("watchpoint list", or
SBWatchpoint::GetDescription).
"watchpoint set var" and "watchpoint set expression" take a size
argument which was previously 1, 2, 4, or 8 (an enum). I've changed this
to an unsigned int. Most hardware implementations can only watch 1, 2,
4, 8 byte ranges, but with Resources we'll allow a user to ask for
different sized watchpoints and set them in hardware-expressble terms
soon.
I've annotated areas where I know there is work still needed with
LWP_TODO that I'll be working on once this is landed.
I've tested this on aarch64 macOS, aarch64 Linux, and Intel macOS.
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
Fixes [#68035](https://github.com/llvm/llvm-project/issues/68035), where
an inconsistency in the order of "Process launched" and "Process
stopped" messages occurs during `process launch`.
The fix involves adjusting the message output sequence in
`CommandObjectProcessLaunch::DoExecute` within
`source/Commands/CommandObjectProcess.cpp`. This ensures "Process
launched" consistently precedes "Process stopped" when executing
commands with the '-o' flag, i.e., non-interactive mode.
Upon implementing this change, two tests failed:
`lldb/test/Shell/Breakpoint/jit-loader_jitlink_elf.test` and
`lldb/test/Shell/Breakpoint/jit-loader_rtdyld_elf.test`. These failures
were expected as they relied on the previous, now-corrected message
order. Updating these tests to align with the new message sequence is
part of this PR's scope.
These error messages are written in a way that makes sense to an lldb
developer, but not to an end user who asks lldb to run on a compressed
corefile or whatever. Simplfy the messages.
This patch changes the interface of
StructuredData::Array::GetItemAtIndexAsString to return a
`std::optional<llvm::StringRef>` instead of taking an out parameter.
More generally, this commit serves as proposal that we change all of the
sibling APIs (`GetItemAtIndexAs`) to do the same thing. The reason this
isn't one giant patch is because it is rather unwieldy changing just one
of these, so if this is approved, I will do all of the other ones as
individual follow-ups.
This completes the conversion of LocateSymbolFile into a SymbolLocator
plugin. The only remaining function is DownloadSymbolFileAsync which
doesn't really fit into the plugin model, and therefore moves into the
SymbolLocator class, while still relying on the plugins to do the
underlying work.
This builds on top of the work started in c3a302d to convert
LocateSymbolFile to a SymbolLocator plugin. This commit moves
DownloadObjectAndSymbolFile.
Often, we only care about the split-dwarf files that have failed to
load. This can be useful when diagnosing binaries with many separate
debug info files where only some have errors.
```
(lldb) help image dump separate-debug-info
List the separate debug info symbol files for one or more target modules.
Syntax: target modules dump separate-debug-info <cmd-options> [<filename> [<filename> [...]]]
Command Options Usage:
target modules dump separate-debug-info [-ej] [<filename> [<filename> [...]]]
-e ( --errors-only )
Filter to show only debug info files with errors.
-j ( --json )
Output the details in JSON format.
This command takes options and free-form arguments. If your arguments
resemble option specifiers (i.e., they start with a - or --), you must use
' -- ' between the end of the command options and the beginning of the
arguments.
'image' is an abbreviation for 'target modules'
```
I updated the following tests
```
# on Linux
bin/lldb-dotest -p TestDumpDwo
# on Mac
bin/lldb-dotest -p TestDumpOso
```
This change applies to both the table and JSON outputs.
---------
Co-authored-by: Tom Yang <toyang@fb.com>
Add the ability to get a C++ vtable ValueObject from another
ValueObject.
This patch adds the ability to ask a ValueObject for a ValueObject that
represents the virtual function table for a C++ class. If the
ValueObject is not a C++ class with a vtable, a valid ValueObject value
will be returned that contains an appropriate error. If it is successful
a valid ValueObject that represents vtable will be returned. The
ValueObject that is returned will have a name that matches the demangled
value for a C++ vtable mangled name like "vtable for <class-name>". It
will have N children, one for each virtual function pointer. Each
child's value is the function pointer itself, the summary is the
symbolication of this function pointer, and the type will be a valid
function pointer from the debug info if there is debug information
corresponding to the virtual function pointer.
The vtable SBValue will have the following:
- SBValue::GetName() returns "vtable for <class>"
- SBValue::GetValue() returns a string representation of the vtable
address
- SBValue::GetSummary() returns NULL
- SBValue::GetType() returns a type appropriate for a uintptr_t type for
the current process
- SBValue::GetLoadAddress() returns the address of the vtable adderess
- SBValue::GetValueAsUnsigned(...) returns the vtable address
- SBValue::GetNumChildren() returns the number of virtual function
pointers in the vtable
- SBValue::GetChildAtIndex(...) returns a SBValue that represents a
virtual function pointer
The child SBValue objects that represent a virtual function pointer has
the following values:
- SBValue::GetName() returns "[%u]" where %u is the vtable function
pointer index
- SBValue::GetValue() returns a string representation of the virtual
function pointer
- SBValue::GetSummary() returns a symbolicated respresentation of the
virtual function pointer
- SBValue::GetType() returns the function prototype type if there is
debug info, or a generic funtion prototype if there is no debug info
- SBValue::GetLoadAddress() returns the address of the virtual function
pointer
- SBValue::GetValueAsUnsigned(...) returns the virtual function pointer
- SBValue::GetNumChildren() returns 0
- SBValue::GetChildAtIndex(...) returns invalid SBValue for any index
Examples of using this API via python:
```
(lldb) script vtable = lldb.frame.FindVariable("shape_ptr").GetVTable()
(lldb) script vtable
vtable for Shape = 0x0000000100004088 {
[0] = 0x0000000100003d20 a.out`Shape::~Shape() at main.cpp:3
[1] = 0x0000000100003e4c a.out`Shape::~Shape() at main.cpp:3
[2] = 0x0000000100003e7c a.out`Shape::area() at main.cpp:4
[3] = 0x0000000100003e3c a.out`Shape::optional() at main.cpp:7
}
(lldb) script c = vtable.GetChildAtIndex(0)
(lldb) script c
(void ()) [0] = 0x0000000100003d20 a.out`Shape::~Shape() at main.cpp:3
```
[lldb] Part 2 of 2 - Refactor `CommandObject::DoExecute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 1 refactors the `CommandObject::Execute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69989](https://github.com/llvm/llvm-project/pull/69989)
rdar://117378957
[lldb] Part 1 of 2 - Refactor `CommandObject::Execute(...)` to return
`void` instead of ~~`bool`~~
Justifications:
- The code doesn't ultimately apply the `true`/`false` return values.
- The methods already pass around a `CommandReturnObject`, typically
with a `result` parameter.
- Each command return object already contains:
- A more precise status
- The error code(s) that apply to that status
Part 2 refactors the `CommandObject::DoExecute(...)` method.
- See
[https://github.com/llvm/llvm-project/pull/69991](https://github.com/llvm/llvm-project/pull/69991)
rdar://117378957
The `po` alias now matches the behavior of the `expression` command when
the it can apply a Fix-It to an expression.
Modifications
- Add has `m_fixed_expression` to the `CommandObjectDWIMPrint` class a
`protected` member that stores the post Fix-It expression, just like the
`CommandObjectExpression` class.
- Converted messages to present tense.
- Add test cases that confirms a Fix-It for a C++ expression for both
`po` and `expressions`
rdar://115317419
The `po` alias now matches the behavior of the `expression` command when
the it can apply a Fix-It to an expression.
Modifications
- Add has `m_fixed_expression` to the `CommandObjectDWIMPrint` class a
`protected` member that stores the post Fix-It expression, just like the
`CommandObjectExpression` class.
- Converted messages to present tense.
- Add test cases that confirms a Fix-It for a C++ expression for both
`po` and `expressions`
rdar://115317419
Co-authored-by: Pete Lawrence <plawrence@apple.com>
## Description
This pull request adds a new `stop-at-user-entry` option to LLDB
`process launch` command, allowing users to launch a process and pause
execution at the entry point of the program (for C-based languages,
`main` function).
## Motivation
This option provides a convenient way to begin debugging a program by
launching it and breaking at the desired entry point.
## Changes Made
- Added `stop-at-user-entry` option to `Options.td` and the
corresponding case in `CommandOptionsProcessLaunch.cpp` (short option is
'm')
- Implemented `GetUserEntryPointName` method in the Language plugins
available at the moment.
- Declared the `CreateBreakpointAtUserEntry` method in the Target API.
- Create Shell test for the command
`command-process-launch-user-entry.test`.
## Usage
`process launch --stop-at-user-entry` or `process launch -m` launches
the process and pauses execution at the entry point of the program.
Prior to this the command would simply crash when run on a running
process.
Of the three register commands, "info" was the only one missing these
requirements. On some level it makes sense because you're not going to
read a value or modify anything, but practically I think lldb assumes
any time you're going to access register related stuff, the process
should be paused.
I noticed this debugging with a remote gdb stub, so I've recreated that
scenario using attach in a new test case.
`watch set expression` was passing the OptionGroupWatchpoint enum
in to Target where the LLDB_WATCH_TYPE_* bitfield was expected.
Modify matched READ|WRITE and resulted in a test failure in
TestWatchTaggedAddress.py. David temporarily changed the test to
expect this incorrect output; this fixes the bug and updates the
test case to test it for correctness again.
This reverts commit a7b78cac9a.
With updates to the tests.
TestWatchTaggedAddress.py: Updated the expected watchpoint types,
though I'm not sure there should be a differnt default for the two
ways of setting them, that needs to be confirmed.
TestStepOverWatchpoint.py: Skipped this everywhere because I think
what used to happen is you couldn't put 2 watchpoints on the same
address (after alignment). I guess that this is now allowed because
modify watchpoints aren't accounted for, but likely should be.
Needs investigating.
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
Re-landing this patch after addressing testsuite failures found in CI on
Linux, Intel machines, and windows.
rdar://108234227
Watchpoints in lldb can be either 'read', 'write', or 'read/write'. This
is exposing the actual behavior of hardware watchpoints. gdb has a
different behavior: a "write" type watchpoint only stops when the
watched memory region *changes*.
A user is using a watchpoint for one of three reasons:
1. Want to find what is changing/corrupting this memory.
2. Want to find what is writing to this memory.
3. Want to find what is reading from this memory.
I believe (1) is the most common use case for watchpoints, and it
currently can't be done in lldb -- the user needs to continue every time
the same value is written to the watched-memory manually. I think gdb's
behavior is the correct one. There are some use cases where a developer
wants to find every function that writes/reads to/from a memory region,
regardless of value, I want to still allow that functionality.
This is also a bit of groundwork for my large watchpoint support
proposal
https://discourse.llvm.org/t/rfc-large-watchpoint-support-in-lldb/72116
where I will be adding support for AArch64 MASK watchpoints which watch
power-of-2 memory regions. A user might ask to watch 24 bytes, and a
MASK watchpoint stub can do this with a 32-byte MASK watchpoint if it is
properly aligned. And we need to ignore writes to the final 8 bytes of
that watched region, and not show those hits to the user.
This patch adds a new 'modify' watchpoint type and it is the default.
rdar://108234227
This already applies to enable and disable, delete was missing
a check.
This cannot be tested properly with the current completion tests,
but it will be when I make them more strict in a follow up patch.
- Allow the definition of synthetic formatters in C++ even when LLDB is built without python scripting support.
- Fix linking problems with the CXXSyntheticChildren
Differential Revision: https://reviews.llvm.org/D158010
Lots of users use "po" as their default print command. If the type
doesn't implement the description function the output is often not what
the user wants. Print a hint telling the user that they might prefer
using "p" instead.
Differential Revision: https://reviews.llvm.org/D153489
Currently frame var --regex sometimes searches globals, sometimes it doesn't.
This happens because `StackFrame::GetVariableList` always returns the biggest
list it has, regardless of whether only globals were requested or not. In other
words, if a previous call to `GetVariableList` requested globals, all subsequent
calls will see them.
The implication here is that users of `StackFrame::GetVariableList` are expected
to filter the results of this function. This is what we do for a vanilla
`frame var` command. But it is not what we do when `--regex` is used. This
commit solves the issue by:
1. Making `--regex` imply `--globals`. This matches the behavior of `frame var
<some_name>`, which will also search the global scope.
2. Making the `--regex` search respect the command object options.
See the added test for an example of the oddities this patch addresses. Without
the patch, the test fails. However it could be made to pass by calling a plain
`frame var` before calling `frame var --regex A::`.
Differential Revision: https://reviews.llvm.org/D155334
These methods all take a `Stream *` to get feedback about what's going
on. By default, it's a nullptr, but we always feed it with a valid
pointer. It would therefore make more sense to have this take a
reference.
Differential Revision: https://reviews.llvm.org/D154883
Fix a crash when trying to complete an ambiguous subcommand. Take `set s
tar` for example: for the subcommand `s` there's ambiguity between set
and show. Pressing TAB after this input currently crashes LLDB. The
problem is that we're trying to complete `tar` but give up at `s`
because of the ambiguity. LLDB doesn't expect the completed string to be
shorter than the current string and crashes when trying to eliminate the
common prefix.
rdar://111848598
Differential revision: https://reviews.llvm.org/D154643
Also, make it possible for new Targets which haven't been added to
the TargetList yet to check for interruption, and add a few more
places in building modules where we can check for interruption.
Differential Revision: https://reviews.llvm.org/D154542
Previously the following would crash:
(lldb) run
Process 2594053 launched: '/tmp/test.o' (aarch64)
Process 2594053 exited with status = 0 (0x00000000)
(lldb) register read <tab>
As the completer assumed that the execution context would always
have a register context. After a program has finished, it does not.
Split out the generic parts of the test from the x86 specific tests,
and added "register info" to both.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D154413
