When debugserver is attaching to a process, it first task_for_pid()'s
and then ptrace(PT_ATTACHEXC)'s. When that ptrace() fails to complete,
we are in a semi-attached state that we need to give up from, and
our error reporting isn't ideal -- we can even claim that the process
is already being debugged (by ourselves).
Differential Revision: https://reviews.llvm.org/D155037
rdar://101152233
jGetLoadedDynamicLibrariesInfos has a mode where it will list
every binary in the process - the load address and filepath from dyld
SPI, and the mach-o header and load commands from a scan by debugserver
for perf reasons. With a large enough number of libraries, creating
that StructuredData representation of all of this, and formatting it
into an ascii string to send up to lldb, can grow debugserver's heap
size too large for some environments.
This patch adds a new report_load_commands:false boolean to the
jGetLoadedDynamicLibrariesInfos packet, where debugserver will now
only report the dyld SPI load address and filepath for all of the
binaries. lldb can then ask for the detailed information on
the process binaries in smaller chunks, and avoid debugserver
having ever growing heap use as the number of binaries inevitably
increases.
This patch also removes a version of jGetLoadedDynamicLibrariesInfos
for pre-iOS 10 and pre-macOS 10.12 systems where we did not use
dyld SPI. We can't back compile to those OS builds any longer
with modern Xcode.
Finally, it removes a requirement in DynamicLoaderMacOS that the
JSON reply from jGetLoadedDynamicLibrariesInfos include the
mod_date field for each binary. This has always been reported as
0 in modern dyld, and is another reason for packet growth in
the reply. debugserver still puts the mod_date field in its replies
for interop with existing lldb's, but we will be able to remove it
the field from debugserver's output after the next release cycle
when this patch has had time to circulate.
I'll add lldb support for requesting the load addresses only
and splitting the request up into chunks in a separate patch.
Differential Revision: https://reviews.llvm.org/D150158
rdar://107848326
Have debugserver parse the watchpoint flags out of the exception
syndrome register when we get a watchpoint mach exception. Relay
those fields up to lldb in the stop reply packet, if the watchpoint
number was reported by the hardware, use the address from that as
the watchpoint address.
Change how watchpoints are reported to lldb from using the mach
exception data, to using the `reason:watchpoint` and `description:asciihex`
method that lldb-server uses, which can relay the actual trap address
as well as the address of a watched memory region responsible for
the trap, so lldb can step past it.
Have debugserver look for the nearest watchpoint that it has set
when it gets a watchpoint trap, so accesses that are reported as
starting before the watched region are associated with the correct
watchpoint to lldb. Add a test case for this specific issue.
Differential Revision: https://reviews.llvm.org/D147820
rdar://83996471
After an exec, the inferior is a new process and none of these memory
regions are still allocated. Clear them out.
Differential Revision: https://reviews.llvm.org/D140253
The dynamic linker on Darwin, dyld, can provide status of
the process state for a few significant points early on,
most importantly, when libSystem has been initialized and it
is safe to call functions behind the scenes. Pipe this
information up from debugserver to DynamicLoaderMacOS, for
the DynamicLoader::IsFullyInitialized() method, then have
Thread::SafeToCallFunctions use this information. Finally,
for the two utility functions in the AppleObjCRuntimeV2
LanguageRuntime plugin that I was fixing, call this method
before running our utility functions to collect the list of
objc classes registered in the runtime.
User expressions will still be allowed to run any time -
we assume the user knows what they are doing - but these
two additional utility functions that they are unaware of
will be limited by this state.
Differential Revision: https://reviews.llvm.org/D139054
rdar://102436092
can probably make function calls.
Change debugserver's posix_spawn() to spawn an inferior process in
its own process group, so signals from the terminal like control-c
are passed to the inferior process instead of debugserer. In lldb's
own native-host launching, there is a LaunchInfo option
LaunchInSeparateProcessGroup, and this mirrors the most common
setting of that on Darwin systems.
Patch by Alessandro Arzilli <alessandro.arzilli@gmail.com>.
Differential Revision: https://reviews.llvm.org/D128504
debugserver parses the Mach-O header & load commands of
binaries; if it does this with a binary whose LC_BUILD
platform enum it does not recognize, it will currently crash.
This patch changes MachProcss::GetPlatformString to return
an optional platform string, and updates the callers to
do the right thing when this optional could not be
provided.
Differential Revision: https://reviews.llvm.org/D136719
rdar://100452994
jGetLoadedDynamicLibrariesInfos normally checks with dyld to find
the list of binaries loaded in the inferior, and getting the filepath,
before trying to parse the Mach-O binary in inferior memory.
This allows for debugserver to parse a Mach-O binary present in memory,
but not yet registered with dyld. This patch also adds some simple
sanity checks that we're reading a Mach-O header before we begin
stepping through load commands, because we won't have the sanity check
of consulting dyld for the list of loaded binaries before parsing.
Also adds a testcase.
[This patch was reverted after causing a testsuite failure on a CI bot;
I haven't been able to repro the failure outside the CI, but I have a
theory that my sanity check on cputype which only matched arm64 and
x86_64 - and the CI machine may have a watch simulator that is still
using i386.]
Differential Revision: https://reviews.llvm.org/D128956
rdar://95737734
jGetLoadedDynamicLibrariesInfos normally checks with dyld to find
the list of binaries loaded in the inferior, and getting the filepath,
before trying to parse the Mach-O binary in inferior memory.
This allows for debugserver to parse a Mach-O binary present in memory,
but not yet registered with dyld. This patch also adds some simple
sanity checks that we're reading a Mach-O header before we begin
stepping through load commands, because we won't have the sanity check
of consulting dyld for the list of loaded binaries before parsing.
Also adds a testcase.
Differential Revision: https://reviews.llvm.org/D128956
rdar://95737734
should not receive as exceptions (some will get converted to BSD
signals instead). This is really the only stable way to ensure that
a Mach exception gets converted to it's equivalent BSD signal. For
programs that rely on BSD signal handlers, this has to happen or you
can't even get the program to invoke the signal handler when under
the debugger.
This builds on a previous solution to this problem which required you
start debugserver with the -U flag. This was not very discoverable
and required lldb be the one to launch debugserver, which is not always
the case.
Differential Revision: https://reviews.llvm.org/D125434
The dyld SPI used by debugserver (_dyld_process_info_create) has become
much slower in macOS BigSur 11.3 causing a significant performance
regression when attaching. This commit mitigates that by caching the
result when calling the SPI to compute the platform.
Differential revision: https://reviews.llvm.org/D102833
Fix the logic to find the app bundle in a path by correctly accounting
for paths containing multiple occurrences of `.app`. The new logic will
correctly extract `com.app.Foo.app` from `com.app.Foo.app/com.app.Foo`.
rdar://74666208
Differential revision: https://reviews.llvm.org/D97441
Debugging app launch/attach failures can be difficult because of
all of the messages logged to the console on a darwin system;
emitting specific messages around critical API calls can make it
easier to narrow the search for the console messages related to
the failure.
<rdar://problem/67220442>
Differential revision: https://reviews.llvm.org/D94357
Use the newly added spawnattr API, posix_spawnattr_setarchpref_np, to
select a slice preferences per cpu and subcpu types, instead of just cpu
with posix_spawnattr_setarchpref_np.
rdar://16094957
Differential revision: https://reviews.llvm.org/D92712
Adds a command line option that makes debugserver propagate the SIGSEGV
signal to the target process.
Motivation: I'm one of the maintainers of Delve [1] a debugger for Go.
We use debugserver as our backend on macOS and one of the most often
reported bugs is that, on macOS, we don't propagate SIGSEGV back to the
target process [2]. Sometimes some programs will actually cause a
SIGSEGV, by design, and then handle it. Those programs can not be
debugged at all.
Since catching signals isn't very important for a Go debugger I'd much
rather have a command line option in debugserver that causes it to let
SIGSEGV go directly to the target process.
[1] https://github.com/go-delve/delve/
[2] https://github.com/go-delve/delve/issues/852
Differential revision: https://reviews.llvm.org/D89315
Link against CarouselServices on watchos, recognize the
WatchComplicationLaunch launch flag option when that framework
is available.
<rdar://problem/62473967>, <rdar://problem/61230088>
This patch is similar in spirit to https://reviews.llvm.org/D84480,
but does the maccatalyst/macosx disambiguation. I also took the
opportunity to factor out the gdb-remote packet log scanning used by
several testcases into lldbutil functions.
rdar://problem/66059257
Differential Revision: https://reviews.llvm.org/D84576
This patch basically moves the disambiguation code from a place where
it was complicated to implement straight to where the load command is
parsed, which has the neat side affect of actually supporting all call
sites!
rdar://problem/66011909
Differential Revision: https://reviews.llvm.org/D84480
This patch fixes debugserver incorrectly returning the SDK version
instead of the minimum deployment target version.
rdar://problem/65001691
Differential Revision: https://reviews.llvm.org/D83443
This reverts commit 0da0437b2a to unbreak
the following tests:
lldb-api.tools/lldb-server.TestAppleSimulatorOSType.py
lldb-api.tools/lldb-server.TestGdbRemoteAttach.py
lldb-api.tools/lldb-server.TestGdbRemoteProcessInfo.py
lldb-api.tools/lldb-server.TestGdbRemoteRegisterState.py
lldb-api.tools/lldb-server.TestGdbRemoteThreadsInStopReply.py
lldb-api.tools/lldb-server.TestLldbGdbServer.py
debugserver and lldb
This patch improves the heuristics for correctly identifying simulator binaries on Darwin and adds support for simulators running on Apple Silicon.
rdar://problem/64046344
Differential Revision: https://reviews.llvm.org/D82616
MachProcess.mm uses a TARGET_OS_ macro without directly including
TargetConditionals.h. This currently works as we get the header
as an indirect dependency, but might not in the future.
I just spent some time investigating an internal regression
caused by a similar issue, so I audited the codebase for such
cases.
Update CallBoardSystemServiceOpenApplication to unconditionally log
the NSError's localizedDescription to Console on app launch failure
(as it was already doing), and also to log the NSError object's
full description to the console, which may contain additional nested
error messages. I'm experimenting to find cases where we will get
more detailed information from app launch failures and will start
by logging both to the console.
<rdar://problem/62709160>
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied with bugfix this time).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
(Patch re-applied without modifications, the bot failure was unrelated).
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
Starting with iOS 13 simulator binaries are identified with an
explicit platform in the new LC_BUILD_VERSION load command.
On older deployment targets using the LC_VERSION_MIN load commands,
this patch detects when an ios process runs on a macOS host and
updates the target triple with the "simulator" environment
accordingly.
This is part of https://bugs.swift.org/browse/SR-11971
rdar://problem/58438125
Differential Revision: https://reviews.llvm.org/D75696
The debugserver profile thread used to suspend itself between samples with
a usleep. When you detach or kill, MachProcess::Clear would delay replying
to the incoming packet until pthread_join of the profile thread returned.
If you are unlucky or the suspend delay is long, it could take longer than
the packet timeout for pthread_join to return. Then you would get an error
about detach not succeeding from lldb - even though in fact the detach was
successful...
I replaced the usleep with PThreadEvents entity. Then we just call a timed
WaitForEventBits, and when debugserver wants to stop the profile thread, it
can set the event bit, and the sleep will exit immediately.
Differential Revision: https://reviews.llvm.org/D75004
When launching an inferior in a new terminal window via AppleScript
and the darwin-debug helper program, we could often end up with the
inferior process having a too-high suspend count, and it would never
resume execution.
lldb tries to wait until darwin-debug has finished its work and has
launched the inferior (WaitForProcessToSIGSTOP) but this wasn't
working correctly - and cannot be made to work.
This patch removes WaitForProcessToSIGSTOP, adds a special tiny
segment to the darwin-debug executable so it can be identified as
that binary (ExecExtraSuspend), and adds code to debugserver to
detect this segment. When debugserver sees this segment, it notes
that the next exec will be done with a launch-suspended flag. When
the next exec happens, debugserver forces an extra task_resume when
we resume the inferior.
An alternative approach would be if lldb could detect when the
inferior has been launched by darwin-debug unambiguously; monitoring
when the unix socket between darwin-debug and lldb was closed would
have been a reasonable way to do this too.
<rdar://problem/29760580>
Differential Revision: https://reviews.llvm.org/D72963
When lldb requests an app launch through FrontBoard/BackBoard,
we get back an NSError object if there was a problem with an
integer error code and a descriptive text string. debugserver
would log the descriptive text string to the console, but it
would only save the error code value, ask for the
much-less-specific name of that error code, and send that very
generic error word back to lldb.
This patch saves the longer description of the failure when
available, and sends that to lldb. If unavailable, it falls
back to sending up the generic description of the error code
as it was doing before.
This only impacts the iOS on-device debugserver.
<rdar://problem/49953304>
Summary: There are a few places in LLDB where we do a `reinterpret_cast` for conversions that we could also do with `static_cast`. This patch moves all this code to `static_cast`.
Reviewers: shafik, JDevlieghere, labath
Reviewed By: labath
Subscribers: arphaman, usaxena95, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D72161
plugin.
Unfortunately the test is currently XFAILed because of missing changes
to the clang driver.
Differential Revision: https://reviews.llvm.org/D67124
llvm-svn: 370931
Adrian's changes to support Catalyst processes and my
changes to support debugserver running on an arm64_32
device (Apple Watch Series 4, which uses an IPL32 model
on arm64 cpus).
llvm-svn: 368118
unused IsSBProcess method, and have IsFBSProcess
return false if we don't have API that we can use to
make that determination, so we'll try other API
if we can.
llvm-svn: 354289
to a process so we'll always get messages in the console logs.
Also make the "is frontboard process" / "is backboard process"
determination lazy, specifically take it out of the
MachProcess::AttachForDebug codepath when we are attaching to a
process, to simplify attaching.
<rdar://problem/47982516>
<rdar://problem/48060134>
llvm-svn: 354181
