The module index dynamic relocation R_ARM_DTPMOD32 is always 1 for an
executable. When static linking and when we know that we are not a shared
object we can resolve the module index relocation statically.
The logic in handleNoRelaxTlsRelocation remains the same for Mips as it
has its own custom GOT writing code. For ARM we add the module index
relocation to the GOT when it can be resolved statically.
In addition the type of the RelExpr for the static resolution of TlsGotRel
should be R_TLS and not R_ABS as we need to include the size of
the thread control block in the calculation.
Addresses the TLS part of PR30218.
Differential revision: https://reviews.llvm.org/D27213
llvm-svn: 288153
When -O0 is specified, we do not do section merging.
Though before this patch several sections were generated instead
of single, what is useless.
Differential revision: https://reviews.llvm.org/D27041
llvm-svn: 288151
This change continues what was started by D27040
Now all allocatable synthetics should be available from script side.
Differential revision: https://reviews.llvm.org/D27131
llvm-svn: 288150
The MipsGotSection::getPageEntryOffset calculates index of GOT entry
with a "page" address. Previously this method changes the state
of MipsGotSection because it modifies PageIndexMap field. That leads
to the unpredictable results if getPageEntryOffset called from multiple threads.
The patch makes getPageEntryOffset constant. To do so it calculates GOT
entry index but does not update PageIndexMap field. Later in the
MipsGotSection::writeTo method linker calculates "page" addresses and
writes them to the output.
llvm-svn: 288129
If output section which referenced by R_MIPS_GOT_PAGE or R_MIPS_GOT16
relocations is small (less that 0x10000 bytes) and occupies two adjacent
0xffff-bytes pages, current formula gives incorrect number of required "page"
GOT entries. The problem is that in time of calculation we do not know
the section address and so we cannot calculate number of 0xffff-bytes
pages exactly.
This patch fix the formula. Now it gives a correct number of pages in
the worst case when "small" section intersects 0xffff-bytes page
boundary. From the other side, sometimes it adds one more redundant GOT
entry for each output section. But usually number of output sections
referenced by GOT relocations is small.
llvm-svn: 288127
-N (-omagic)
Set the text and data sections to be readable and writable.
Also, do not page-align the data segment.
Differential revision: https://reviews.llvm.org/D26888
llvm-svn: 288123
That unifies handling cases when we have SECTIONS and when
-no-rosegment is given in compareSectionsNonScript()
Now Config->SingleRoRx is used for check, testcase is provided.
llvm-svn: 288022
--no-rosegment: Do not put read-only non-executable sections in their own segment
Differential revision: https://reviews.llvm.org/D26889
llvm-svn: 288020
Unfortunatelly PT_ARM_EXIDX is special. There is no way to create it
from linker scripts, so we have to create it even if PHDRS is used.
This matches bfd and is required for the lld output to survive bfd's strip.
llvm-svn: 288012
Unfortunatelly some scripts look like
kernphys = ...
. = ....
and the expectation in that every orphan section is after the
assignment.
llvm-svn: 287996
This is an horrible special case, but seems to match bfd's behaviour
and is important for avoiding placing an orphan section before the
expected start of the file.
llvm-svn: 287994
-color-diagnostics=auto is default because that's the same as
Clang's default. When color is enabled, error or warning messages
are colored like this.
error:
<bold>ld.lld</bold> <red>error:</red> foo.o: no such file
warning:
<bold>ld.lld</bold> <magenta>warning:</magenta> foo.o: no such file
Differential Revision: https://reviews.llvm.org/D27117
llvm-svn: 287949
This is important for cases like:
.sdata : {
*(.got.plt .got)
...
}
That was not supported before as there was no way to get access to
synthetic sections from script.
More details on review page.
Differential revision: https://reviews.llvm.org/D27040
llvm-svn: 287913
This patch changes the error message from
too many errors emitted, stopping now
to
too many errors emitted, stopping now (use -error-limit=0 to see all errors)
Thanks for Sean for the suggestion!
llvm-svn: 287900
The .ARM.exidx table has an entry for each function with the first entry
giving the start address of the function, the table is sorted in ascending
order of function address. Given a PC value, the unwinder will search the
table for the entry that contains the PC value.
If the table entry happens to be the last, the range of the addresses that
the final unwinding table describes will extend to the end of the address
space. To prevent an incorrect address outside the address range of the
program matching the last entry we follow ld.bfd's example and add a
sentinel EXIDX_CANTUNWIND entry at the end of the table. This gives the
final real table entry an upper bound.
In addition the llvm libunwind unwinder currently depends on the presence
of a sentinel entry (PR31091).
Differential revision: https://reviews.llvm.org/D26977
llvm-svn: 287869
Previously, if a symbol specified by -e or ENTRY() is not found,
we didn't set entry point address. That is incompatible with GNU
because GNU linkers set the first address of .text to entry.
This patch implement that behavior.
llvm-svn: 287836
Offset between beginning of a .got section and _gp symbols used in MIPS
GOT relocations calculations. Usually the expression looks like
VA + Offset - GP, where VA is the .got section address, Offset - offset
of the GOT entry, GP - offset between .got and _gp. Also there two "magic"
symbols _gp_disp and __gnu_local_gp which hold the offset mentioned above.
These symbols might be referenced by MIPS relocations.
Now the linker always defines _gp symbol and uses hardcoded value for
its initialization. So offset between .got and _gp is 0x7ff0. The _gp_disp
and __gnu_local_gp defined if required and initialized by 0x7ff0.
In fact that is not correct because _gp symbol might be defined by a linker
script and holds arbitrary value. In that case we need to use this value
in relocation calculation and initialize _gp_disp and __gnu_local_gp
properly.
The patch fixes the problem and completes fixing the bug #30311.
https://llvm.org/bugs/show_bug.cgi?id=30311
Differential revision: https://reviews.llvm.org/D27036
llvm-svn: 287832
This is in the context of https://llvm.org/bugs/show_bug.cgi?id=31109.
When LLD prints out errors for relocations, it tends to print out
extremely large number of errors (like millions) because it would
print out one error per relocation.
This patch makes LLD bail out if it prints out more than 20 errors.
You can configure the limitation using -error-limit argument.
-error-limit=0 means no limit.
I chose the flag name because Clang has the same feature as -ferror-limit.
"f" doesn't make sense to us, so I omitted it.
Differential Revision: https://reviews.llvm.org/D26981
llvm-svn: 287789
Align to the large page size (known as a superpage or huge page).
FreeBSD automatically promotes large, superpage-aligned allocations.
Differential Revision: https://reviews.llvm.org/D27042
llvm-svn: 287782
An upcoming change to the image base address for x86-64 (D27042) will
will change some addresses and hence the instruction encodings. We care
about the disassembled instructions, not their encodings.
Differential Revision: https://reviews.llvm.org/D27056
llvm-svn: 287778
Now that lld switched to lib/LTO, which always calls setDataLayout(),
we don't need this check anymore.
Thanks to Peter for pointing out!
llvm-svn: 287699
GNU LD allows `ASSERT` commands to be in output section descriptions.
Note that LD also mandates that `ASSERT` commands in this context must
end with a semicolon.
llvm-svn: 287677
If the linker script has SECTIONS, the address computation is now
always done in LinkerScript::assignAddresses, like for any other
section.
Before fixHeaders would do a tentative computation that
assignAddresses would sometimes override.
This patch also splits the cases where assignAddresses needs to add
the headers to the first PT_LOAD and the address computation. The net
effect is that we no longer create an empty page for no reason in the
included test case, which matches bfd behavior.
llvm-svn: 287565
Previously, we discarded .debug$ sections. This patch adds them to
files so that PDB.cpp can access them.
This patch also adds a debug option, /dumppdb, to dump debug info
fed to createPDB so that we can verify that valid data has been passed.
llvm-svn: 287555
LLD's error messages contain line numbers, function names or section names.
Currently they are formatter as follows.
foo.c (32): symbol 'foo' not found
foo.c (function bar): symbol 'foo' not found
foo.c (.text+0x1234): symbol 'foo' not found
This patch changes them so that they are consistent with Clang's output.
foo.c:32: symbol 'foo' not found
foo.c:(function bar): symbol 'foo' not found
foo.c:(.text+0x1234): symbol 'foo' not found
Differential Revision: https://reviews.llvm.org/D26901
llvm-svn: 287537
GNU linkers disagree here.
Though both -version and -v are mentioned
in help to print the version information, GNU ld just normally exits,
while gold can continue linking. We are compatible with ld.bfd here.
This fixes PR31057.
Differential revision: https://reviews.llvm.org/D26865
llvm-svn: 287448
