This patch corresponds to review:
https://reviews.llvm.org/D25912
This is the first patch in a series of 4 that improve the lowering and combining
for BUILD_VECTOR nodes on PowerPC.
llvm-svn: 288152
In rL283190, I added some InstAlias definitions to generate extended mnemonics
for some uses of the XXPERMDI instruction. However, when the assembler matches
these extended mnemonics, it matches the new instruction in situations where it
should match the old one.
This patch removes these definitions and accomplishes that by defining these
mnemonics with additional instructions that are isCodeGenOnly.
Fixes PR31127.
llvm-svn: 287765
Summary:
* ARM is omitted from this patch because this check appears to expose bugs in this target.
* Mips is omitted from this patch because this check either detects bugs or deliberate
emission of instructions that don't satisfy their predicates. One deliberate
use is the SYNC instruction where the version with an operand is correctly
defined as requiring MIPS32 while the version without an operand is defined
as an alias of 'SYNC 0' and requires MIPS2.
* X86 is omitted from this patch because it doesn't use the tablegen-erated
MCCodeEmitter infrastructure.
Patches for ARM and Mips will follow.
Depends on D25617
Reviewers: tstellarAMD, jmolloy
Subscribers: wdng, jmolloy, aemerson, rengolin, arsenm, jyknight, nemanjai, nhaehnle, tstellarAMD, llvm-commits
Differential Revision: https://reviews.llvm.org/D25618
llvm-svn: 287439
When we see a SETCC whose only users are zero extend operations, we can replace
it with a subtraction. This results in doing all calculations in GPRs and
avoids CR use.
Currently we do this only for ULT, ULE, UGT and UGE condition codes. There are
ways that this can be extended. For example for signed condition codes. In that
case we will be introducing additional sign extend instructions, so more careful
profitability analysis may be required.
Another direction to extend this is for equal, not equal conditions. Also when
users of SETCC are any_ext or sign_ext, we might be able to do something
similar.
llvm-svn: 287329
For the default, small and medium code model, use the existing
difference from the jump table towards the label. For all other code
models, setup the picbase and use the difference between the picbase and
the block address.
Overall, this results in smaller data tables at the expensive of one or
two more arithmetic operation at the jump site. Given that we only create
jump tables with a lot more than two entries, it is a net win in size.
For larger code models the assumption remains that individual functions
are no larger than 2GB.
Differential Revision: https://reviews.llvm.org/D26336
llvm-svn: 287059
This patch implements all the overloads for vec_xl_be and vec_xst_be. On BE,
they behaves exactly the same with vec_xl and vec_xst, therefore they are
simply implemented by defining a matching macro. On LE, they are implemented
by defining new builtins and intrinsics. For int/float/long long/double, it
is just a load (lxvw4x/lxvd2x) or store(stxvw4x/stxvd2x). For char/char/short,
we also need some extra shuffling before or after call the builtins to get the
desired BE order. For int128, simply call vec_xl or vec_xst.
llvm-svn: 286967
add an intrinsic to expose the 'VSX Scalar Convert Half-Precision to
Single-Precision' instruction.
Differential review: https://reviews.llvm.org/D26536
llvm-svn: 286862
This patch corresponds to review:
https://reviews.llvm.org/D26480
Adds all the intrinsics used for various permute builtins that will
be added to altivec.h.
llvm-svn: 286638
This patch corresponds to review:
https://reviews.llvm.org/D26307
Adds all the intrinsics used for various conversion builtins that will
be added to altivec.h. These are type conversions between various types of
vectors.
llvm-svn: 286596
The generic infrastructure to compute the Newton series for reciprocal and
reciprocal square root was conceived to allow a target to compute the series
itself. However, the original code did not properly consider this condition
if returned by a target. This patch addresses the issues to allow a target
to compute the series on its own.
Differential revision: https://reviews.llvm.org/D22975
llvm-svn: 286523
behind the test that the MachineModuleInfo analysis was
actually available and can be used.
While the MachO bits may well be reasonable to assume in the darwin
assembly printer, the analysis isn't constructively guaranteed anywhere
I could find so it seems safest to avoid crashing here.
This issue was found with PVS-Studio. Pretty sure the Clang Static
Anaylzer flags similar issues but we've probably never pointed it at
this code effectively.
llvm-svn: 285972
GPRC and GPRC_NOR0 (or the 64bit equivalent) and not just the latter.
GPRC_NOR0 contains ZERO as alternative meaning of r0 and is therefore
not a true subclass of GPRC.
llvm-svn: 285813
This patch corresponds to review:
https://reviews.llvm.org/D25896
It just eliminates the redundant ZExt after a count trailing zeros instruction.
llvm-svn: 285267
These functions are about classifying a global which will actually be
emitted, so it does not make sense for them to take a GlobalValue which may
for example be an alias.
Change the Mach-O object writer and the Hexagon, Lanai and MIPS backends to
look through aliases before using TargetLoweringObjectFile interfaces. These
are functional changes but all appear to be bug fixes.
Differential Revision: https://reviews.llvm.org/D25917
llvm-svn: 285006
https://reviews.llvm.org/D24924
This improves the code generated for a sequence of AND, ANY_EXT, SRL instructions. This is a targetted fix for this special pattern. The pattern is generated by target independet dag combiner and so a more general fix may not be necessary. If we come across other similar cases, some ideas for handling it are discussed on the code review.
llvm-svn: 284983
This is a retry of r284495 which was reverted at r284513 due to use-after-scope bugs
caused by faulty usage of StringRef.
This version also renames a pair of functions:
getRecipEstimateDivEnabled()
getRecipEstimateSqrtEnabled()
as suggested by Eric Christopher.
original commit msg:
[Target] remove TargetRecip class; move reciprocal estimate isel functionality to TargetLowering
This is a follow-up to https://reviews.llvm.org/D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284746
All of these existed because MSVC 2013 was unable to synthesize default
move ctors. We recently dropped support for it so all that error-prone
boilerplate can go.
No functionality change intended.
llvm-svn: 284721
This is a follow-up to D24816 - where we changed reciprocal estimates to be function attributes
rather than TargetOptions.
This patch is intended to be a structural, but not functional change. By moving all of the
TargetRecip functionality into TargetLowering, we can remove all of the reciprocal estimate
state, shield the callers from the string format implementation, and simplify/localize the
logic needed for a target to enable this.
If a function has a "reciprocal-estimates" attribute, those settings may override the target's
default reciprocal preferences for whatever operation and data type we're trying to optimize.
If there's no attribute string or specific setting for the op/type pair, just use the target
default settings.
As noted earlier, a better solution would be to move the reciprocal estimate settings to IR
instructions and SDNodes rather than function attributes, but that's a multi-step job that
requires infrastructure improvements. I intend to work on that, but it's not clear how long
it will take to get all the pieces in place.
Differential Revision: https://reviews.llvm.org/D25440
llvm-svn: 284495
This is a patch to implement pr30640.
When a 64bit constant has the same hi/lo words, we can use rldimi to copy the low word into high word of the same register.
This optimization caused failure of test case bperm.ll because of not optimal heuristic in function SelectAndParts64. It chooses AND or ROTATE to extract bit groups from a register, and OR them together. This optimization lowers the cost of loading 64bit constant mask used in AND method, and causes different code sequence. But actually ROTATE method is better in this test case. The reason is in ROTATE method the final OR operation can be avoided since rldimi can insert the rotated bits into target register directly. So this patch also enhances SelectAndParts64 to prefer ROTATE method when the two methods have same cost and there are multiple bit groups need to be ORed together.
Differential Revision: https://reviews.llvm.org/D25521
llvm-svn: 284276
Summary:
In PPCMIPeephole, when we see two splat instructions, we can't simply do the following transformation:
B = Splat A
C = Splat B
=>
C = Splat A
because B may still be used between these two instructions. Instead, we should make the second Splat a PPC::COPY and let later passes decide whether to remove it or not:
B = Splat A
C = Splat B
=>
B = Splat A
C = COPY B
Fixes PR30663.
Reviewers: echristo, iteratee, kbarton, nemanjai
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D25493
llvm-svn: 283961
Summary:
I had for the second time today a bug where llvm::format("%s", Str)
was called with Str being a StringRef. The Linux and MacOS bots were
fine, but windows having different calling convention, it printed
garbage.
Instead we can catch this at compile-time: it is never expected to
call a C vararg printf-like function with non scalar type I believe.
Reviewers: bogner, Bigcheese, dexonsmith
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D25266
llvm-svn: 283509
The motivation for the change is that we can't have pseudo-global settings for
codegen living in TargetOptions because that doesn't work with LTO.
Ideally, these reciprocal attributes will be moved to the instruction-level via
FMF, metadata, or something else. But making them function attributes is at least
an improvement over the current state.
The ingredients of this patch are:
Remove the reciprocal estimate command-line debug option.
Add TargetRecip to TargetLowering.
Remove TargetRecip from TargetOptions.
Clean up the TargetRecip implementation to work with this new scheme.
Set the default reciprocal settings in TargetLoweringBase (everything is off).
Update the PowerPC defaults, users, and tests.
Update the x86 defaults, users, and tests.
Note that if this patch needs to be reverted, the related clang patch checked in
at r283251 should be reverted too.
Differential Revision: https://reviews.llvm.org/D24816
llvm-svn: 283252
This patch corresponds to review:
The newly added VSX D-Form (register + offset) memory ops target the upper half
of the VSX register set. The existing ones target the lower half. In order to
unify these and have the ability to target all the VSX registers using D-Form
operations, this patch defines Pseudo-ops for the loads/stores which are
expanded post-RA. The expansion then choses the correct opcode based on the
register that was allocated for the operation.
llvm-svn: 283212
This patch corresponds to review:
https://reviews.llvm.org/D23155
This patch removes the VSHRC register class (based on D20310) and adds
exploitation of the Power9 sub-word integer loads into VSX registers as well
as vector sign extensions.
The new instructions are useful for a few purposes:
Int to Fp conversions of 1 or 2-byte values loaded from memory
Building vectors of 1 or 2-byte integers with values loaded from memory
Storing individual 1 or 2-byte elements from integer vectors
This patch implements all of those uses.
llvm-svn: 283190
The PPC branch-selection pass, which performs branch relaxation, needs to
account for the padding that might be introduced to satisfy block alignment
requirements. We were assuming that the first block was at offset zero (i.e.
had the alignment of the function itself), but under the ELFv2 ABI, a global
entry function prologue is added to the first block, and it is a
two-instruction sequence (i.e. eight-bytes long). If the function has 16-byte
alignment, the fact that the first block is eight bytes offset from the start
of the function is relevant to calculating where padding will be added in
between later blocks.
Unfortunately, I don't have a small test case.
llvm-svn: 283086
This change enables soft-float for PowerPC64, and also makes soft-float disable
all vector instruction sets for both 32-bit and 64-bit modes. This latter part
is necessary because the PPC backend canonicalizes many Altivec vector types to
floating-point types, and so soft-float breaks scalarization support for many
operations. Both for embedded targets and for operating-system kernels desiring
soft-float support, it seems reasonable that disabling hardware floating-point
also disables vector instructions (embedded targets without hardware floating
point support are unlikely to have Altivec, etc. and operating system kernels
desiring not to use floating-point registers to lower syscall cost are unlikely
to want to use vector registers either). If someone needs this to work, we'll
need to change the fact that we promote many Altivec operations to act on
v4f32. To make it possible to disable Altivec when soft-float is enabled,
hardware floating-point support needs to be expressed as a positive feature,
like the others, and not a negative feature, because target features cannot
have dependencies on the disabling of some other feature. So +soft-float has
now become -hard-float.
Fixes PR26970.
llvm-svn: 283060
This patch corresponds to review:
https://reviews.llvm.org/D24396
This patch adds support for the "vector count trailing zeroes",
"vector compare not equal" and "vector compare not equal or zero instructions"
as well as "scalar count trailing zeroes" instructions. It also changes the
vector negation to use XXLNOR (when VSX is enabled) so as not to increase
register pressure (previously this was done with a splat immediate of all
ones followed by an XXLXOR). This was done because the altivec.h
builtins (patch to follow) use vector negation and the use of an additional
register for the splat immediate is not optimal.
llvm-svn: 282478
This patch corresponds to review:
https://reviews.llvm.org/D21135
This patch exploits the following instructions:
mtvsrws
lxvwsx
mtvsrdd
mfvsrld
In order to improve some build_vector and extractelement patterns.
llvm-svn: 282246
