…ne stepping (#112939)"
This was breaking some gdb-remote packet counting tests on the bots. I
can't see how this patch could cause that breakage, but I'm reverting to
figure that out.
This reverts commit f147437945.
Previously lldb didn't support setting breakpoints on call site
locations. This patch adds that ability.
It would be very slow if we did this by searching all the debug
information for every inlined subroutine record looking for a call-site
match, so I added one restriction to the call-site support. This change
will find all call sites for functions that also supply at least one
line to the regular line table. That way we can use the fact that the
line table search will move the location to that subsequent line (but
only within the same function). When we find an actually moved source
line match, we can search in the function that contained that line table
entry for the call-site, and set the breakpoint location back to that.
When I started writing tests for this new ability, it quickly became
obvious that our support for virtual inline stepping was pretty buggy.
We didn't print the right file & line number for the breakpoint, and we
didn't set the position in the "virtual inlined stack" correctly when we
hit the breakpoint. We also didn't step through the inlined frames
correctly. There was code to try to detect the right inlined stack
position, but it had been refactored a while back with the comment that
it was super confusing and the refactor was supposed to make it clearer,
but the refactor didn't work either.
That code was made much clearer by abstracting the job of "handling the
stack readjustment" to the various StopInfo's. Previously, there was a
big (and buggy) switch over stop info's. Moving the responsibility to
the stop info made this code much easier to reason about.
We also had no tests for virtual inlined stepping (our inlined stepping
test was actually written specifically to avoid the formation of a
virtual inlined stack... So I also added tests for that along with the
tests for setting the call-site breakpoints.
ValueObject is part of lldbCore for historical reasons, but conceptually
it deserves to be its own library. This does introduce a (link-time) circular
dependency between lldbCore and lldbValueObject, which is unfortunate
but probably unavoidable because so many things in LLDB rely on
ValueObject. We already have cycles and these libraries are never built
as dylibs so while this doesn't improve the situation, it also doesn't
make things worse.
The header includes were updated with the following command:
```
find . -type f -exec sed -i.bak "s%include \"lldb/Core/ValueObject%include \"lldb/ValueObject/ValueObject%" '{}' \;
```
This allows languages to provide an opinion on whether two symbol
contexts are equivalent (i.e. belong to the same function).
It is useful to drive the comparisons done by stepping plans that need
to ensure symbol contexts obtained from different points in time are
actually the same.
I've been getting complaints from users being spammed by -gmodules
missing file warnings going out of control because each object file
depends on an entire DAG of PCM files that usually are all missing at
once. To reduce this problem, this patch does two things:
1. Module now maintains a DenseMap<hash, once> that is used to display
each warning only once, based on its actual text.
2. The PCM warning itself is reworded to include less details, such as
the DIE offset, which is only useful to LLDB developers, who can get
this from the dwarf log if they need it. Because the detail is omitted
the hashing from (1) deduplicates the warnings.
rdar://138144624
Swift types have mangled names, so there should be a way to read those
from the compiler type.
This patch upstreams these two changes from swiftlang/llvm-project
(which were added there since at least 2016).
Disable -Wdeprecated-declarations for codecvt_utf8 in Editline. This is
in preparation for #112276 which narrows the scope of
-Wno-deprecated-declarations for building LLDB.
Sometimes users (esp. gdb-longtime users) accidentally use GDB syntax,
such as `breakpoint foo`, and they would get an error message from LLDB
saying simply `Invalid command "breakpoint foo"`, which is not very
helpful.
This change provides additional suggestions to help correcting the
mistake.
This allows IDEs to render LLDB expression diagnostics to their liking
without relying on characterprecise ASCII art from LLDB. It is exposed
as a versioned SBStructuredData object, since it is expected that this
may need to be tweaked based on actual usage.
Reverting this again; I added a commit which added @skipIfDarwin
markers to the TestReverseContinueBreakpoints.py and
TestReverseContinueNotSupported.py API tests, which use lldb-server
in gdbserver mode which does not work on Darwin. But the aarch64 ubuntu
bot reported a failure on TestReverseContinueBreakpoints.py,
https://lab.llvm.org/buildbot/#/builders/59/builds/6397
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 63, in test_reverse_continue_skip_breakpoint
self.reverse_continue_skip_breakpoint_internal(async_mode=False)
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/test/API/functionalities/reverse-execution/TestReverseContinueBreakpoints.py", line 81, in reverse_continue_skip_breakpoint_internal
self.expect(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 2372, in expect
self.runCmd(
File "/home/tcwg-buildbot/worker/lldb-aarch64-ubuntu/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 1002, in runCmd
self.assertTrue(self.res.Succeeded(), msg + output)
AssertionError: False is not true : Process should be stopped due to history boundary
Error output:
error: Process must be launched.
This reverts commit 4f297566b3.
This commit only adds support for the
`SBProcess::ReverseContinue()` API. A user-accessible command for this
will follow in a later commit.
This feature depends on a gdbserver implementation (e.g. `rr`) providing
support for the `bc` and `bs` packets. `lldb-server` does not support
those packets, and there is no plan to change that. So, for testing
purposes, `lldbreverse.py` wraps `lldb-server` with a Python
implementation of *very limited* record-and-replay functionality for use
by *tests only*.
The majority of this PR is test infrastructure (about 700 of the 950
lines added).
This patch adds the support to `Process.cpp` to automatically save off
TLS sections, either via loading the memory region for the module, or
via reading `fs_base` via generic register. Then when Minidumps are
loaded, we now specify we want the dynamic loader to be the `POSIXDYLD`
so we can leverage the same TLS accessor code as `ProcessELFCore`. Being
able to access TLS Data is an important step for LLDB generated
minidumps to have feature parity with ELF Core dumps.
Temporarily Revert until Chelsea can look at this. With a clean build,
SBLanguages.h won't be generated in the build directory at the point
when it is included by lldb-enumerations when compiling e.g.
Broadcaster.cpp. On a clean build (no pre-existing build directory),
the dependency ordering is not explicitly stated so the build will fail.
An incremental build will succeed.
This reverts commit b3554265f2.
This fixes the following assertion: "Cannot create Expected<T> from
Error success value." The problem was that GetFrameBaseValue return
false without updating the Status argument. This patch eliminates the
opportunity for mistakes by returning an llvm:Error.
This commit only adds support for the
`SBProcess::ReverseContinue()` API. A user-accessible command for this
will follow in a later commit.
This feature depends on a gdbserver implementation (e.g. `rr`) providing
support for the `bc` and `bs` packets. `lldb-server` does not support
those packets, and there is no plan to change that. So, for testing
purposes, `lldbreverse.py` wraps `lldb-server` with a Python
implementation of *very limited* record-and-replay functionality for use
by *tests only*.
The majority of this PR is test infrastructure (about 700 of the 950
lines added).
Add an "always on" log category and channel. Unlike other, existing log
channels, it is not exposed to users. The channel is meant to be used
sparsely and deliberately for logging high-value information to the
system log.
We have a similar concept in the downstream Swift fork and this has
proven to be extremely valuable. This is especially true on macOS where
system log messages are automatically captured as part of a sysdiagnose.
This fixes a build error with msvc for code introduced in #106442:
```
...\lldb\source\Expression\DiagnosticManager.cpp(37): error C2668: 'llvm::ErrorInfo<lldb_private::ExpressionError,lldb_private::ExpressionErrorBase>::ErrorInfo': ambiguous call to overloaded function
...\llvm\include\llvm/Support/Error.h(357): note: could be 'llvm::ErrorInfo<lldb_private::ExpressionError,lldb_private::ExpressionErrorBase>::ErrorInfo(std::error_code)', which inherits 'lldb_private::CloneableECError::CloneableECError(std::error_code)' via base class 'lldb_private::ExpressionErrorBase'
...\llvm\include\llvm/Support/Error.h(357): note: or 'llvm::ErrorInfo<lldb_private::ExpressionError,lldb_private::ExpressionErrorBase>::ErrorInfo(std::error_code,std::string)', which inherits 'lldb_private::ExpressionErrorBase::ExpressionErrorBase(std::error_code,std::string)' via base class 'lldb_private::ExpressionErrorBase'
...\lldb\source\Expression\DiagnosticManager.cpp(37): note: while trying to match the argument list '(std::error_code)'
```
This is similar to 9fe455fd0c, but for FA locations instead of
register locations.
This is useful for unwind plans that cannot create abstract unwind
rules, but instead must inspect the state of the program to determine
the current CFA.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
This patch is a reworking of Pete Lawrence's (@PortalPete) proposal
for better expression evaluator error messages:
https://github.com/llvm/llvm-project/pull/80938
Before:
```
$ lldb -o "expr a+b"
(lldb) expr a+b
error: <user expression 0>:1:1: use of undeclared identifier 'a'
a+b
^
error: <user expression 0>:1:3: use of undeclared identifier 'b'
a+b
^
```
After:
```
(lldb) expr a+b
^ ^
│ ╰─ error: use of undeclared identifier 'b'
╰─ error: use of undeclared identifier 'a'
```
This eliminates the confusing `<user expression 0>:1:3` source
location and avoids echoing the expression to the console again, which
results in a cleaner presentation that makes it easier to grasp what's
going on. You can't see it here, bug the word "error" is now also in
color, if so desired.
Depends on https://github.com/llvm/llvm-project/pull/106442.
…NFC]
This patch is the first patch in a series reworking of Pete Lawrence's
(@PortalPete) amazing proposal for better expression evaluator error
messages (https://github.com/llvm/llvm-project/pull/80938)
This patch is preparatory patch for improving the rendering of
expression evaluator diagnostics. Currently diagnostics are rendered
into a string and the command interpreter layer then textually parses
words like "error:" to (sometimes) color the output accordingly. In
order to enable user interfaces to do better with diagnostics, we need
to store them in a machine-readable fromat. This patch does this by
adding a new llvm::Error kind wrapping a DiagnosticDetail struct that
is used when the error type is eErrorTypeExpression. Multiple
diagnostics are modeled using llvm::ErrorList.
Right now the extra information is not used by the CommandInterpreter,
this will be added in a follow-up patch!
If your arguments or option values are of a type that naturally uses one
of our common completion mechanisms, you will get completion for free.
But if you have your own custom values or if you want to do fancy things
like have `break set -s foo.dylib -n ba<TAB>` only complete on symbols
in foo.dylib, you can use this new mechanism to achieve that.
The UnwindPlan class has getter and setter methods for specifying an
abstract register location, but it doesn't have a setter for a DWARF
Expression register location. This hasn't been needed for any of the
UnwindPlans that we do in mainline lldb yet, but it is used in the Swift
language SwiftLanguageRuntime plugin which creates UnwindPlan for async
functions. While it's currently unused on main branch, this is a
straightforward setter in the same form as the others, the only caveat
being that it doesn't own the dwarf expression bytes, it has a pointer
to them.
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Relanding with built-in cloning support for llvm::ECError, and support
for initializing a Windows error with a NO_ERROR error code, and
modifying TestGDBRemotePlatformFile.py to support different renderings
of ENOSYS.
lldb has two RegisterLocation classes that do slightly different things.
UnwindPlan::Row::RegisterLocation (new: AbstractRegisterLocation) has a
description of how to find a register's value or location, not specific
to a particular stopping point. It may say that at a given offset into a
function, the caller's register has been spilled to stack memory at CFA
minus an offset. Or it may say that the caller's register is at a DWARF
exprssion.
UnwindLLDB::RegisterLocation (new: ConcreteRegisterLocation) is a
specific address where the register is currently stored, or the register
it has been copied into, or its value at this point in the current
function execution.
When lldb stops in a function, it interprets the
AbstractRegisterLocation's instructions using the register context and
stack memory, to create the ConcreteRegisterLocation at this point in
time for this stack frame.
I'm not thrilled with AbstractRegisterLocation and
ConcreteRegisterLocation, but it's better than the same name and it will
be easier to update them if someone suggests a better pair.
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Relanding with built-in cloning support for llvm::ECError, and support
for initializing a Windows error with a NO_ERROR error code.
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Relanding with built-in cloning support for llvm::ECError, and support
for initializing a Windows error with a NO_ERROR error code.
Sometimes you only want to temporarily disable a frame recognizer
instead of deleting it. In particular, when dealing with one of the
builtin frame recognizers, which cannot be restored after deletion.
To be able to write test cases for this functionality, I also changed
`lldb/test/API/commands/frame/recognizer` to use normal C instead of
Objective-C
This reverts commit 104b249c23 because
it has caused 2 test failures on Windows:
https://lab.llvm.org/buildbot/#/builders/141/builds/2544
Failed Tests (2):
lldb-api :: functionalities/gdb_remote_client/TestGDBRemotePlatformFile.py
lldb-unit :: Utility/./UtilityTests.exe/StatusTest/ErrorWin32
I reckon the cause is the same, that we construct an error with the Win32
NO_ERROR value which means there was no error but we're assuming anything
with an error code is a failure.
...and "[lldb/Interpreter] Introduce `ScriptedStopHook{,Python}Interface` & make use of it (#105449)"
This reverts commit 76b827bb4d, and commit 1e131ddfa8
because the first commit caused the test command-stop-hook-output.test to fail.
This patch introduces new `ScriptedStopHook{,Python}Interface` classes
that make use of the Scripted Interface infrastructure and makes use of
it in `StopHookScripted`.
It also relax the requirement on the number of argument for initializing
scripting extension if the size of the interface parameter pack contains
1 less element than the extension maximum number of positional arguments
for this initializer.
This addresses the cases where the embedded interpreter session
dictionary is passed to the extension initializer which is not used most
of the time.
---------
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch adds new requirements to the Scripted Interface abstract
method checker to check the minimum number of argument for abstract
methods.
This check is done when creating the interface object so the object is
not created if the user implementation doesn't match the abstract method
requirement.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Relanding with built-in cloning support for llvm::ECError.
(based on a conversation I had with @labath yesterday in
https://github.com/llvm/llvm-project/pull/106442)
Most APIs that currently vend a Status would be better served by
returning llvm::Expected<> instead. If possibles APIs should be
refactored to avoid Status. The only legitimate long-term uses of Status
are objects that need to store an error for a long time (which should be
questioned as a design decision, too).
This patch makes the transition to llvm::Error easier by making the
places that cannot switch to llvm::Error explicit: They are marked with
a call to Status::clone(). Every other API can and should be refactored
to use llvm::Expected. In the end Status should only be used in very few
places.
Whenever an unchecked Error is dropped by Status it logs this to the
verbose API channel.
Implementation notes:
This patch introduces two new kinds of error_category as well as new
llvm::Error types. Here is the mapping of lldb::ErrorType to
llvm::Errors:
```
(eErrorTypeInvalid)
eErrorTypeGeneric llvm::StringError
eErrorTypePOSIX llvm::ECError
eErrorTypeMachKernel MachKernelError
eErrorTypeExpression llvm::ErrorList<ExpressionError>
eErrorTypeWin32 Win32Error
```
Implement operators `<=` and `>=` to explicitly check the comparison
results to be `cmpLessThan` or `cmpEqual` instead of negating the result
of `operators<`.
Fixes#85947
