In order to not generate an unnecessary G_CTLZ, I extended the constant folder
in the CSEMIRBuilder to handle G_CTLZ. I also added some extra handing of
vector constants too. It seems we don't have any support for doing constant
folding of vector constants, so the tests show some other useless G_SUB
instructions too.
Differential Revision: https://reviews.llvm.org/D111036
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
Similar to what SDAG does when it sees a smulo/umulo against 2
(see: `DAGCombiner::visitMULO`)
This pattern is fairly common in Swift code AFAICT.
Here's an example extracted from a Swift testcase:
https://godbolt.org/z/6cT8Mesx7
Differential Revision: https://reviews.llvm.org/D110662
Rework getConstantstVRegValWithLookThrough in order to make it clear if we
are matching integer/float constant only or any constant(default).
Add helper functions that get DefVReg and APInt/APFloat from constant instr
getIConstantVRegValWithLookThrough: integer constant, only G_CONSTANT
getFConstantVRegValWithLookThrough: float constant, only G_FCONSTANT
getAnyConstantVRegValWithLookThrough: either G_CONSTANT or G_FCONSTANT
Rename getConstantVRegVal and getConstantVRegSExtVal to getIConstantVRegVal
and getIConstantVRegSExtVal. These now only match G_CONSTANT as described
in comment.
Relevant matchers now return both DefVReg and APInt/APFloat.
Replace existing uses of getConstantstVRegValWithLookThrough and
getConstantVRegVal with new helper functions. Any constant match is
only required in:
ConstantFoldBinOp: for constant argument that was bit-cast of float to int
getAArch64VectorSplat: AArch64::G_DUP operands can be any constant
amdgpu select for G_BUILD_VECTOR_TRUNC: operands can be any constant
In other places use integer only constant match.
Differential Revision: https://reviews.llvm.org/D104409
The doc comment for isPredecessor says:
Returns true if \p DefMI precedes \p UseMI or they are the same
instruction.
And dominates relies on that behavior for its own:
Returns true if \p DefMI dominates \p UseMI. By definition an
instruction dominates itself.
Make both statements correct by fixing isPredecessor.
Found by inspection.
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
This is a port of a combine which matches a pattern where a wide type scalar
value is stored by several narrow stores. It folds it into a single store or
a BSWAP and a store if the targets supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
=>
*((i32)p) = val;
On CTMark AArch64 -Os this results in a good amount of savings:
Program before after diff
SPASS 412792 412788 -0.0%
kc 432528 432512 -0.0%
lencod 430112 430096 -0.0%
consumer-typeset 419156 419128 -0.0%
bullet 475840 475752 -0.0%
tramp3d-v4 367760 367628 -0.0%
clamscan 383388 383204 -0.0%
pairlocalalign 249764 249476 -0.1%
7zip-benchmark 570100 568860 -0.2%
sqlite3 287628 286920 -0.2%
Geomean difference -0.1%
Differential Revision: https://reviews.llvm.org/D109419
Legalize G_MEMCPY, G_MEMMOVE, G_MEMSET and G_MEMCPY_INLINE.
Corresponding intrinsics are replaced by a loop that uses loads/stores in
AMDGPULowerIntrinsics pass unless their length is a constant lower then
MemIntrinsicExpandSizeThresholdOpt (default 1024). Any G_MEM* instruction that
reaches legalizer should have a const length argument and should be expanded
into appropriate number of loads + stores.
Differential Revision: https://reviews.llvm.org/D108357
This allows constructing a MemDesc from a MachineMemoryOperand, a pattern that starts to show up more frequently.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D109161
This adds the following combines:
```
x = ... 0 or 1
c = icmp eq x, 1
->
c = x
```
and
```
x = ... 0 or 1
c = icmp ne x, 0
->
c = x
```
When the target's true value for the relevant types is 1.
This showed up in the following situation:
https://godbolt.org/z/M5jKexWTW
SDAG currently supports the `ne` case, but not the `eq` case. This can probably
be further generalized, but I don't feel like thinking that hard right now.
This gives some minor code size improvements across the board on CTMark at
-Os for AArch64. (0.1% for 7zip and pairlocalalign in particular.)
Differential Revision: https://reviews.llvm.org/D109130
The sext_inreg_of_load combine did not have the isLegalOrBeforeLegalizer check,
leading to the generation of potentially illegal G_SEXTLOADs when run after legalization.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D108626
Combine two G_PTR_ADDs, but keep the register bank of the constant.
That way, the combine can be used in post-regbank-select combines.
Introduce two helper methods in CombinerHelper, getRegBank and
setRegBank that get and set an optional register bank to a register.
That way, they can be used before and after register bank selection.
Differential Revision: https://reviews.llvm.org/D103326
This is a fairly common pattern:
```
%mask = G_CONSTANT iN <mask val>
%add = G_ADD %lhs, %rhs
%and = G_AND %add, %mask
```
We have combines to eliminate G_AND with a mask that does nothing.
If we combined the above to this:
```
%mask = G_CONSTANT iN <mask val>
%narrow_lhs = G_TRUNC %lhs
%narrow_rhs = G_TRUNC %rhs
%narrow_add = G_ADD %narrow_lhs, %narrow_rhs
%ext = G_ZEXT %narrow_add
%and = G_AND %ext, %mask
```
We'd be able to take advantage of those combines using the trunc + zext.
For this to work (or be beneficial in the best case)
- The operation we want to narrow then widen must only be used by the G_AND
- The G_TRUNC + G_ZEXT must be free
- Performing the operation at a narrower width must not produce a different
value than performing it at the original width *after masking.*
Example comparison between SDAG + GISel: https://godbolt.org/z/63jzb1Yvj
At -Os for AArch64, this is a 0.2% code size improvement on CTMark/pairlocalign.
Differential Revision: https://reviews.llvm.org/D107929
We should use MachineInstr::eraseFromParentAndMarkDBGValuesForRemoval()
instead of eraseFromParent().
We should probably use that in other places too but fix this issue which
affects clang bootstrap builds for now.
Instructions that produceSameValue produce same values for operands with
same index. matchEqualDefs used to return true for any two values from
different instructions that produce same values. Fix this by checking if
values are defined by operands with the same index.
Differential Revision: https://reviews.llvm.org/D107362
Use it AArch64 post-legal combiner. These don't always get folded because when
the instructions are created the constants are obscured by artifacts.
Differential Revision: https://reviews.llvm.org/D106776
Although this combine checks that there's no load folding barriers between
the loads that it's trying to merge, it was inserting the load at the
MIRBuilder's default insertion point, which is the G_OR use inst.
This was causing a miscompile in the test suite's
SingleSource/Regression/C/gcc-c-torture/execute/GCC-C-execute-bswap-2
Differential Revision: https://reviews.llvm.org/D106251
This adds some level of type safety, allows helper functions to be added for
specific opcodes for free, and also allows us to succinctly check for class
membership with the usual dyn_cast/isa/cast functions.
To start off with, add variants for the different load/store operations with some
places using it.
Differential Revision: https://reviews.llvm.org/D105751
We're trying to match a few pointer computation patterns here for
re-association opportunities.
1) Isolating a constant operand to be on the RHS, e.g.:
G_PTR_ADD(BASE, G_ADD(X, C)) -> G_PTR_ADD(G_PTR_ADD(BASE, X), C)
2) Folding two constants in each sub-tree as long as such folding
doesn't break a legal addressing mode.
G_PTR_ADD(G_PTR_ADD(BASE, C1), C2) -> G_PTR_ADD(BASE, C1+C2)
AArch64 code size improvements on CTMark with -Os:
Program before after diff
pairlocalalign 251048 251044 -0.0%
consumer-typeset 421820 421812 -0.0%
kc 431348 431320 -0.0%
SPASS 413404 413300 -0.0%
clamscan 384396 384220 -0.0%
tramp3d-v4 370640 370412 -0.1%
lencod 432096 431772 -0.1%
bullet 479400 478796 -0.1%
sqlite3 288504 288072 -0.1%
7zip-benchmark 573796 570768 -0.5%
Geomean difference -0.1%
Differential Revision: https://reviews.llvm.org/D105069
This enables proper lowering of non-byte sized loads. We still aren't
faithfully preserving memory types everywhere, so the legality checks
still only consider the size.
Adds legalizer, register bank select, and instruction
select support for G_SBFX and G_UBFX. These opcodes generate
scalar or vector ALU bitfield extract instructions for
AMDGPU. The instructions allow both constant or register
values for the offset and width operands.
The 32-bit scalar version is expanded to a sequence that
combines the offset and width into a single register.
There are no 64-bit vgpr bitfield extract instructions, so the
operations are expanded to a sequence of instructions that
implement the operation. If the width is a constant,
then the 32-bit bitfield extract instructions are used.
Moved the AArch64 specific code for creating G_SBFX to
CombinerHelper.cpp so that it can be used by other targets.
Only bitfield extracts with constant offset and width values
are handled currently.
Differential Revision: https://reviews.llvm.org/D100149
Since this method can apply to cmpxchg operations, make sure it's clear
what value we're actually retrieving. This will help ensure we don't
accidentally ignore the failure ordering of cmpxchg in the future.
We could potentially introduce a getOrdering() method on AtomicSDNode
that asserts the operation isn't cmpxchg, but not sure that's
worthwhile.
Differential Revision: https://reviews.llvm.org/D103338
Use existing KnownBits helpers from KnownBits.h to simplify G_ICMPs.
E.g.
x == x -> true
x != x -> false
load(x) > 1 -> true (when the load is known to be greater than 1)
And so on.
Differential Revision: https://reviews.llvm.org/D102542
