Currently `X86TTIImpl::getInterleavedMemoryOpCostAVX512()` asks about i8 elt type,
so this change does affect vectorization. In the end, it will ask about i1.
We should also try to promote to i16 if we have AVX512BW, i'll do that in a follow-up.
All costs here look good, i've added the missing truncation costs in preparatory patches.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113853
Some of the costs get larger here,
but i suppose that makes sense since we'd previously query
scalarization costs that may not be really representative of the reality.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113852
While this one is trivial and identical to the previous patch,
there is a weird cost change in a follow-up patch that i'm not sure about.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113851
While this one is trivial and identical to the previous patch,
there is a weird cost change in a follow-up patch that i'm not sure about.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113850
The basic idea is simple, if we don't have native shuffle for this element type,
then we must have native shuffle for wider element type,
so promote, replicate, demote.
I believe, asking `getCastInstrCost(Instruction::Trunc` is correct semantically,
case in point `trunc <32 x i32> to <32 x i8>` aka 2 * ZMM will naively result in
2 * XMM, that then will be packed into 1 * YMM,
and it should count the cost of said packing,
not just the truncations.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113609
This was noticed in D113609, hopefully it unblocks that patch.
There are likely other similar problems.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113842
VBMI introduced VPERMB, so cost-model i8 replication shuffle using it.
Note that we can still model i8 replication shufflle without VBMI,
by promoting to i16/i32. That will be done in follow-ups.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113479
BWI introduced VPERMW, so cost-model i16 replication shuffle using it.
Note that we can still model i16 replication shufflle without BWI,
by promoting to i32. That will be done in follow-ups.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113478
This models lowering to `vpermd`/`vpermq`/`vpermps`/`vpermpd`,
that take a single input vector and a single index vector,
and are cross-lane. So far i haven't seen evidence that
replication ever results in demanding more than a single
input vector per output vector.
This results in *shockingly* lesser costs :)
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113350
It is trivial to produce DemandedSrcElts given DemandedReplicatedElts,
so don't pass the former. Also, it isn't really useful so far
to have the overload taking the Mask, so just inline it.
Hiding it in `getInterleavedMemoryOpCost()` is problematic for a number of reasons,
including testability and reuse, let's do better.
In a followup `getUserCost()` will be taught to use to to estimate the mask costs,
which will allow for better cost model tests for it.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D113313
Even though AVX512's masked mem ops (unlike AVX1/2) have a mask
that is a `VF x i1`, replication of said masks happens after
promotion of it to `VF x i8`, so we should use `i8`, not `i1`,
when calculating the cost of mask replication.
I don't really buy that masked interleaved memory loads/stores are supported on X86.
There is zero costmodel test coverage, no actual cost modelling for the generation
of the mask repetition, and basically only two LV tests.
Additionally, i'm not very interested in AVX512.
I don't know if this really helps "soft" block over at
https://reviews.llvm.org/D111460#inline-1075467,
but i think it can't make things worse at least.
When we are being told that there is a masking, instead of
completely giving up and falling back to
fully scalarizing `BasicTTIImplBase::getInterleavedMemoryOpCost()`,
let's correctly query the cost of masked memory ops,
keep all the pretty shuffle cost modelling,
but scalarize the cost computation for the mask replication.
I think, not scalarizing the shuffles themselves
may adjust the computed costs a bit,
and maybe hopefully just enough to hide the "regressions"
at https://reviews.llvm.org/D111460#inline-1075467
I do mean hide, because the test coverage is non-existent.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112873
Similar to AVX1, the cost of splitting/merging 512-bit -> 256-bits vectors for arithmetic operations are typically hidden due to different used ports etc.
By definition, interleaving load of stride N means:
load N*VF elements, and shuffle them into N VF-sized vectors,
with 0'th vector containing elements `[0, VF)*stride + 0`,
and 1'th vector containing elements `[0, VF)*stride + 1`.
Example: https://godbolt.org/z/df561Me5E (i64 stride 4 vf 2 => cost 6)
Now, not fully interleaved load, is when not all of these vectors is demanded.
So at worst, we could just pretend that everything is demanded,
and discard the non-demanded vectors. What this means is that the cost
for not-fully-interleaved group should be not greater than the cost
for the same fully-interleaved group, but perhaps somewhat less.
Examples:
https://godbolt.org/z/a78dK5Geq (i64 stride 4 (indices 012u) vf 2 => cost 4)
https://godbolt.org/z/G91ceo8dM (i64 stride 4 (indices 01uu) vf 2 => cost 2)
https://godbolt.org/z/5joYob9rx (i64 stride 4 (indices 0uuu) vf 2 => cost 1)
Right now, for such not-fully-interleaved loads we just use the costs
for fully-interleaved loads. But at least **in general**,
that is obviously overly pessimistic, because **in general**,
not all the shuffles needed to perform the full interleaving
will end up being live.
So what this does, is naively scales the interleaving cost
by the fraction of the live members. I believe this should still result
in the right ballpark cost estimate, although it may be over/under -estimate.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112307
Replace X86ProcFamilyEnum::IntelSLM enum with a TuningUseSLMArithCosts flag instead, matching what we already do for Goldmont.
This just leaves X86ProcFamilyEnum::IntelAtom to replace with general Tuning/Feature flags and we can finally get rid of the old X86ProcFamilyEnum enum.
Differential Revision: https://reviews.llvm.org/D112079
A few more tuples are being queried after D111546. Might be good to model them,
They all require a lot of manual assembly surgery.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/9bnKrefcG - for intels `Block RThroughput: =40.0`; for ryzens, `Block RThroughput: =16.0`
So could pick cost of `40`
For store we have:
https://godbolt.org/z/5s3s14dEY - for intels `Block RThroughput: =40.0`; for ryzens, `Block RThroughput: =16.0`
So we could pick cost of `40`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111945
A few more tuples are being queried after D111546. Might be good to model them,
They all require a lot of manual assembly surgery.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/MTaKboejM - for intels `Block RThroughput: =32.0`; for ryzens, `Block RThroughput: <=16.0`
So could pick cost of `32`
For store we have:
https://godbolt.org/z/v7xPj3Wd4 - for intels `Block RThroughput: =32.0`; for ryzens, `Block RThroughput: <=32.0`
So we could pick cost of `32`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111944
A few more tuples are being queried after D111546. Might be good to model them,
They all require a lot of manual assembly surgery.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/11rcvdreP - for intels `Block RThroughput: <=68.0`; for ryzens, `Block RThroughput: <=48.0`
So could pick cost of `68`
For store we have:
https://godbolt.org/z/6aM11fWcP - for intels `Block RThroughput: <=64.0`; for ryzens, `Block RThroughput: <=32.0`
So we could pick cost of `64`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111943
A few more tuples are being queried after D111546. Might be good to model them,
They all require a lot of manual assembly surgery.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/s5b6E6jsP - for intels `Block RThroughput: <=32.0`; for ryzens, `Block RThroughput: <=24.0`
So could pick cost of `32`
For store we have:
https://godbolt.org/z/efh99d93b - for intels `Block RThroughput: <=48.0`; for ryzens, `Block RThroughput: <=32.0`
So we could pick cost of `48`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111942
A few more tuples are being queried after D111546. Might be good to model them,
They all require a lot of manual assembly surgery.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/YTeT9M7fW - for intels `Block RThroughput: <=212.0`; for ryzens, `Block RThroughput: <=64.0`
So could pick cost of `212`
For store we have:
https://godbolt.org/z/vc954KEGP - for intels `Block RThroughput: <=90.0`; for ryzens, `Block RThroughput: <=24.0`
So we could pick cost of `90`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111940
These cases use the same codegen as AVX2 (pshuflw/pshufd) for the sub-128bit vector deinterleaving, and unpcklqdq for v2i64.
It's going to take a while to add full interleaved cost coverage, but since these are the same for SSE2 -> AVX2 it should be an easy win.
Fixes PR47437
Differential Revision: https://reviews.llvm.org/D111938
And another attempt to start untangling this ball of threads around gather.
There's `TTI::prefersVectorizedAddressing()`hoop, which confusingly defaults to `true`,
which tells LV to try to vectorize the addresses that lead to loads,
but X86 generally can not deal with vectors of addresses,
the only instructions that support that are GATHER/SCATTER,
but even those aren't available until AVX2, and aren't really usable until AVX512.
This specializes the hook for X86, to return true only if we have AVX512 or AVX2 w/ fast gather.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111546
While i've modelled most of the relevant tuples for AVX2,
that only covered fully-interleaved groups.
By definition, interleaving load of stride N means:
load N*VF elements, and shuffle them into N VF-sized vectors,
with 0'th vector containing elements `[0, VF)*stride + 0`,
and 1'th vector containing elements `[0, VF)*stride + 1`.
Example: https://godbolt.org/z/df561Me5E (i64 stride 4 vf 2 => cost 6)
Now, not fully interleaved load, is when not all of these vectors is demanded.
So at worst, we could just pretend that everything is demanded,
and discard the non-demanded vectors. What this means is that the cost
for not-fully-interleaved group should be not greater than the cost
for the same fully-interleaved group, but perhaps somewhat less.
Examples:
https://godbolt.org/z/a78dK5Geq (i64 stride 4 (indices 012u) vf 2 => cost 4)
https://godbolt.org/z/G91ceo8dM (i64 stride 4 (indices 01uu) vf 2 => cost 2)
https://godbolt.org/z/5joYob9rx (i64 stride 4 (indices 0uuu) vf 2 => cost 1)
As we have established over the course of last ~70 patches, (wow)
`BaseT::getInterleavedMemoryOpCos()` is absolutely bogus,
it is usually almost an order of magnitude overestimation,
so i would claim that we should at least use the hardcoded costs
of fully interleaved load groups.
We could go further and adjust them e.g. by the number of demanded indices,
but then i'm somewhat fearful of underestimating the cost.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111174
This a NFC refactor patch to merge the AVX2 interleaved cost handling back into the getInterleavedMemoryOpCost base method - while getInterleavedMemoryOpCostAVX512 uses instruction and patterns very specific to AVX512+, much of the costs analysis for AVX2 can be reused for all SSE targets.
This is the first step towards improving SSE and AVX1 costs that will reuse the relevant AVX2 costs by splitting some of the tables - for instance AVX1 has very similar costs for most vXi64/vXf64 interleave patterns and many sub-128bit vector costs are the same all the way down to SSE2 (or at least SSSE3).
Differential Revision: https://reviews.llvm.org/D111822
I have some upcoming refactoring for SSE/AVX1 interleaving cost support, and the diff is a lot nicer if the (unaltered) AVX512 implementation isn't stuck between getInterleavedMemoryOpCost and getInterleavedMemoryOpCostAVX2
Without SSE41 sext/zext instructions the extensions will be split, meaning that the MUL->PMADDWD fold will split the sext_i32(x) into zext_i32(sext_i16(x))
`X86TTIImpl::getGSScalarCost()` has (at least) two issues:
* it naively computes the cost of sequence of `insertelement`/`extractelement`.
If we are operating not on the XMM (but YMM/ZMM),
this widely overestimates the cost of subvector insertions/extractions.
* Gather/scatter takes a vector of pointers, and scalarization results in us performing
scalar memory operation for each of these pointers, but we never account for the cost
of extracting these pointers out of the vector of pointers.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111222
As suggested on D111024, we should treat getCmpSelInstrCost calls without a specific predicate as matching the worst case predicate cost.
These regressions will be addressed with a mixture of D111024 and fixing other specific getCmpSelInstrCost calls to have realistic predicates.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/1jfGddcre - for intels `Block RThroughput: =36.0`; for ryzens, `Block RThroughput: =12.0`
So could pick cost of `36`
For store we have:
https://godbolt.org/z/ao9srMT8r - for intels `Block RThroughput: =30.0`; for ryzens, `Block RThroughput: =12.0`
So we could pick cost of `30`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111094
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/rc8jYxW6M - for intels `Block RThroughput: =18.0`; for ryzens, `Block RThroughput: =6.0`
So could pick cost of `18`.
For store we have:
https://godbolt.org/z/9PhPEr65G - for intels `Block RThroughput: =15.0`; for ryzens, `Block RThroughput: =6.0`
So we could pick cost of `15`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111093
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/onese7rec - for intels `Block RThroughput: =6.0`; for ryzens, `Block RThroughput: =3.0`
So could pick cost of `6`.
For store we have:
https://godbolt.org/z/bMd7dddnT - for intels `Block RThroughput: =8.0`; for ryzens, `Block RThroughput: <=6.0`
So we could pick cost of `8`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111092
This one required quite a bit of an assembly surgery, but i think it's in the right ballpark..
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/na97Kb96o - for intels `Block RThroughput: <=64.0`; for ryzens, `Block RThroughput: <=32.0`
So could pick cost of `64`.
For store we have:
https://godbolt.org/z/GG1WeoKar - for intels `Block RThroughput: =66.0`; for ryzens, `Block RThroughput: <=27.5`
So we could pick cost of `66`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111091
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/jK85GWKaK - for intels `Block RThroughput: =31.0`; for ryzens, `Block RThroughput: <=17.0`
So could pick cost of `31`.
For store we have:
https://godbolt.org/z/hPWWhEEf9 - for intels `Block RThroughput: =33.0`; for ryzens, `Block RThroughput: <=13.8`
So we could pick cost of `33`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111089
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/szEj1ceee - for intels `Block RThroughput: =15.0`; for ryzens, `Block RThroughput: <=8.8`
So could pick cost of `15`.
For store we have:
https://godbolt.org/z/81bq4fTo1 - for intels `Block RThroughput: =12.0`; for ryzens, `Block RThroughput: <=10.0`
So we could pick cost of `12`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111087
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/aec96Thee - for intels `Block RThroughput: =6.0`; for ryzens, `Block RThroughput: <=3.3`
So could pick cost of `6`.
For store we have:
https://godbolt.org/z/aec96Thee - for intels `Block RThroughput: =9.0`; for ryzens, `Block RThroughput: <=3.0`
So we could pick cost of `9`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111083
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/3M3hbq7n8 - for intels `Block RThroughput: =20.0`; for ryzens, `Block RThroughput: =8.0`
So could pick cost of `20`.
For store we have:
https://godbolt.org/z/zvnPYWTx7 - for intels `Block RThroughput: =20.0`; for ryzens, `Block RThroughput: =8.0`
So we could pick cost of `20`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111076
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/MTKdzjvnr - for intels `Block RThroughput: =8.0`; for ryzens, `Block RThroughput: <=4.0`
So could pick cost of `8`.
For store we have:
https://godbolt.org/z/cMYEvqoah - for intels `Block RThroughput: =8.0`; for ryzens, `Block RThroughput: <=4.0`
So we could pick cost of `8`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111075
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/z197317d1 - for intels `Block RThroughput: =6.0`; for ryzens, `Block RThroughput: =2.0`
So could pick cost of `6`.
For store we have:
https://godbolt.org/z/8dzszjf9q - for intels `Block RThroughput: =6.0`; for ryzens, `Block RThroughput: <=4.0`
So we could pick cost of `6`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111073
This one required quite a bit of assembly surgery, but the trend continues, so i think this is right.
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/EKWdj8cKT - for intels `Block RThroughput: <=32.0`; for ryzens, `Block RThroughput: <=24.0`
So could pick cost of `32`.
For store we have:
https://godbolt.org/z/zj4bb9P75 - for intels `Block RThroughput: =32.0`; for ryzens, `Block RThroughput: <=16.0`
So we could pick cost of `32`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111064
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/a6rxMG6ec - for intels `Block RThroughput: =16.0`; for ryzens, `Block RThroughput: <=12.0`
So could pick cost of `16`.
For store we have:
https://godbolt.org/z/ced1bdqc9 - for intels `Block RThroughput: =16.0`; for ryzens, `Block RThroughput: <=8.0`
So we could pick cost of `16`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111063
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/avq1oz98W - for intels `Block RThroughput: =8.0`; for ryzens, `Block RThroughput: =4.0`
So could pick cost of `8`.
For store we have:
https://godbolt.org/z/89PGMc1qs - for intels `Block RThroughput: =6.0`; for ryzens, `Block RThroughput: <=6.0`
So we could pick cost of `6`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111061
Finally, we are getting to the heavy-hitter stuff!
The only sched models that for cpu's that support avx2
but not avx512 are: haswell, broadwell, skylake, zen1-3
For load we have:
https://godbolt.org/z/7crGWoar6 - for intels `Block RThroughput: =4.0`; for ryzens, `Block RThroughput: <=2.0`
So could pick cost of `4`.
For store we have:
https://godbolt.org/z/T8aq3MszM - for intels `Block RThroughput: =5.0`; for ryzens, `Block RThroughput: <=2.0`
So we could pick cost of `5`.
I'm directly using the shuffling asm the llc produced,
without any manual fixups that may be needed
to ensure sequential execution.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D111060
