Summary:
This adds the beginning of an update API to preserve MemorySSA. In particular,
this patch adds a way to remove memory SSA accesses when instructions are
deleted.
It also adds relevant unit testing infrastructure for MemorySSA's API.
(There is an actual user of this API, i will make that diff dependent on this one. In practice, a ton of opt passes remove memory instructions, so it's hopefully an obviously useful API :P)
Reviewers: hfinkel, reames, george.burgess.iv
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D17157
llvm-svn: 262362
The cleanupret instruction has an invariant that it's 'from' operand be
a cleanuppad. This invariant was violated when we removed a dead block
which removed a cleanuppad leaving behind a cleanupret with an undef
'from' operand.
This was solved in r261731 by staving off the removal of the dead block
to a later pass.
However, it occured to me that we do not need to do this.
Instead, we can simply avoid processing the cleanupret if it has an
undef 'from' operand because we know that it will be removed soon.
llvm-svn: 261754
DeleteDeadBlock was called indiscriminately, leading to cleanuprets with
undef cleanuppad references.
Instead, try to drain the BB of most of it's instructions if it is
unreachable. We can then remove the BB if it solely consists of a
terminator (and maybe some phis).
llvm-svn: 261731
It is problematic if the inlinee has a cleanupret which unwinds to
caller and we inline it into a call site which doesn't unwind.
If the funclet unwinds anywhere other than to the caller,
then we will give the funclet two unwind destinations.
This will result in a verifier failure.
Seeing as how the caller wasn't an invoke (which would locally unwind)
and that the funclet cannot unwind to caller, we must conclude that an
'unwind to caller' cleanupret is dynamically unreachable.
This fixes PR26698.
Differential Revision: http://reviews.llvm.org/D17536
llvm-svn: 261656
Summary:
When we completely unroll a loop, it's pretty easy to update DT in-place and
thus avoid rebuilding it. DT recalculation is one of the most time-consuming
tasks in loop-unroll, so avoiding it at least in case of full unroll should be
beneficial.
On some extreme (but still real-world) tests this patch improves compile time by
~2x.
Reviewers: escha, jmolloy, hfinkel, sanjoy, chandlerc
Subscribers: joker.eph, sanjoy, llvm-commits
Differential Revision: http://reviews.llvm.org/D17473
llvm-svn: 261595
The issue was that we only required LCSSA rebuilding if the immediate
parent-loop had values used outside of it. The fix is to enaable the
same logic for all outer loops, not only immediate parent.
llvm-svn: 261575
I missed == and != when I removed implicit conversions between iterators
and pointers in r252380 since they were defined outside ilist_iterator.
Since they depend on getNodePtrUnchecked(), they indirectly rely on UB.
This commit removes all uses of these operators. (I'll delete the
operators themselves in a separate commit so that it can be easily
reverted if necessary.)
There should be NFC here.
llvm-svn: 261498
Stop relying on `getNodePtrUnchecked()` being useful on invalid
iterators. This function is documented to be for internal use only, and
the pointer type will eventually have to change to remove UB from
ilist_iterator. Instead, check the iterator before it has been
invalidated.
llvm-svn: 261497
Cleanuppads may be merged together if one is the only predecessor of the
other in which case a simple transform can be performed: replace the
a cleanupret with a branch and remove an unnecessary cleanuppad.
Differential Revision: http://reviews.llvm.org/D17459
llvm-svn: 261390
This patch enables the vectorization of first-order recurrences. A first-order
recurrence is a non-reduction recurrence relation in which the value of the
recurrence in the current loop iteration equals a value defined in the previous
iteration. The load PRE of the GVN pass often creates these recurrences by
hoisting loads from within loops.
In this patch, we add a new recurrence kind for first-order phi nodes and
attempt to vectorize them if possible. Vectorization is performed by shuffling
the values for the current and previous iterations. The vectorization cost
estimate is updated to account for the added shuffle instruction.
Contributed-by: Matthew Simpson and Chad Rosier <mcrosier@codeaurora.org>
Differential Revision: http://reviews.llvm.org/D16197
llvm-svn: 261346
routine.
We were getting this wrong in small ways and generally being very
inconsistent about it across loop passes. Instead, let's have a common
place where we do this. One minor downside is that this will require
some analyses like SCEV in more places than they are strictly needed.
However, this seems benign as these analyses are complete no-ops, and
without this consistency we can in many cases end up with the legacy
pass manager scheduling deciding to split up a loop pass pipeline in
order to run the function analysis half-way through. It is very, very
annoying to fix these without just being very pedantic across the board.
The only loop passes I've not updated here are ones that use
AU.setPreservesAll() such as IVUsers (an analysis) and the pass printer.
They seemed less relevant.
With this patch, almost all of the problems in PR24804 around loop pass
pipelines are fixed. The one remaining issue is that we run simplify-cfg
and instcombine in the middle of the loop pass pipeline. We've recently
added some loop variants of these passes that would seem substantially
cleaner to use, but this at least gets us much closer to the previous
state. Notably, the seven loop pass managers is down to three.
I've not updated the loop passes using LoopAccessAnalysis because that
analysis hasn't been fully wired into LoopSimplify/LCSSA, and it isn't
clear that those transforms want to support those forms anyways. They
all run late anyways, so this is harmless. Similarly, LSR is left alone
because it already carefully manages its forms and doesn't need to get
fused into a single loop pass manager with a bunch of other loop passes.
LoopReroll didn't use loop simplified form previously, and I've updated
the test case to match the trivially different output.
Finally, I've also factored all the pass initialization for the passes
that use this technique as well, so that should be done regularly and
reliably.
Thanks to James for the help reviewing and thinking about this stuff,
and Ben for help thinking about it as well!
Differential Revision: http://reviews.llvm.org/D17435
llvm-svn: 261316
more places to prevent gratuitous re-"runs" of these passes.
The passes themselves don't do any work when run, but we keep spending
time scheduling and running these needlessly when we really don't need
to do so.
This is the first patch towards fixing the really horrible loop pass
pipeline fragmentation pointed out by Sanjoy in PR24804.
llvm-svn: 261302
This function is used to check whether a dbg.value intrinsic has already
been inserted, but without comparing the DIExpression, it would erroneously
fire on split aggregates and only the first scalar would survive.
Found via http://reviews.llvm.org/D16867.
<rdar://problem/24456528>
llvm-svn: 261145
Summary:
Extending findExistingExpansion can use existing value in ExprValueMap.
This patch gives 0.3~0.5% performance improvements on
benchmarks(test-suite, spec2000, spec2006, commercial benchmark)
Reviewers: mzolotukhin, sanjoy, zzheng
Differential Revision: http://reviews.llvm.org/D15559
llvm-svn: 260938
Summary:
Export the CloneDebugInfoMetadata utility, which clones all debug info
associated with a function into the first module. Also use this function
in CloneModule on each function we clone (the CloneFunction entrypoint
already does this).
Without this, cloning a module will lead to DI quality regressions,
especially since r252219 reversed the Function <-> DISubprogram edge
(before we could get lucky and have this edge preserved if the
DISubprogram itself was, e.g. due to location metadata).
This was verified to fix missing debug information in julia and
a unittest to verify the new behavior is included.
Patch by Yichao Yu! Thanks!
Reviewers: loladiro, pcc
Differential Revision: http://reviews.llvm.org/D17165
llvm-svn: 260791
Summary:
Performing this optimization duplicates the call to the convergent
function and adds new control-flow dependencies, which is a no-no.
Reviewers: jingyue
Subscribers: broune, hfinkel, tra, resistor, joker.eph, arsenm, llvm-commits, mzolotukhin
Differential Revision: http://reviews.llvm.org/D17128
llvm-svn: 260730
MSan adds a constructor to each translation unit that calls
__msan_init, and does nothing else. The idea is to run __msan_init
before any instrumented code. This results in multiple constructors
and multiple .init_array entries in the final binary, one per
translation unit. This is absolutely unnecessary; one would be
enough.
This change moves the constructors to a comdat group in order to drop
the extra ones.
llvm-svn: 260632
Summary:
As discussed on IRC, move the ThinLTOGlobalProcessing code out of
the linker, and into TransformUtils. The name of the class is changed
to FunctionImportGlobalProcessing.
Reviewers: joker.eph, rafael
Subscribers: joker.eph, llvm-commits
Differential Revision: http://reviews.llvm.org/D17081
llvm-svn: 260395
sanitizer issue. The PredicatedScalarEvolution's copy constructor
wasn't copying the Generation value, and was leaving it un-initialized.
Original commit message:
[SCEV][LAA] Add no wrap SCEV predicates and use use them to improve strided pointer detection
Summary:
This change adds no wrap SCEV predicates with:
- support for runtime checking
- support for expression rewriting:
(sext ({x,+,y}) -> {sext(x),+,sext(y)}
(zext ({x,+,y}) -> {zext(x),+,sext(y)}
Note that we are sign extending the increment of the SCEV, even for
the zext case. This is needed to cover the fairly common case where y would
be a (small) negative integer. In order to do this, this change adds two new
flags: nusw and nssw that are applicable to AddRecExprs and permit the
transformations above.
We also change isStridedPtr in LAA to be able to make use of
these predicates. With this feature we should now always be able to
work around overflow issues in the dependence analysis.
Reviewers: mzolotukhin, sanjoy, anemet
Subscribers: mzolotukhin, sanjoy, llvm-commits, rengolin, jmolloy, hfinkel
Differential Revision: http://reviews.llvm.org/D15412
llvm-svn: 260112
We shouldn't assert when there are no memchecks, since we
can have SCEV checks. There is already an assert covering
the case where there are no SCEV checks or memchecks.
This also changes the LAA pointer wrapping versioning test
to use the loop versioning pass (this was how I managed to
trigger the assert in the loop versioning pass).
llvm-svn: 260086
In r255133 (reapplied r253126) we started to avoid redundant
recomputation of LCSSA after loop-unrolling. This patch moves one step
further in this direction - now we can avoid it for much wider range of
loops, as we start to look at IR and try to figure out if the
transformation actually breaks LCSSA phis or makes it necessary to
insert new ones.
Differential Revision: http://reviews.llvm.org/D16838
llvm-svn: 259869
D16251)
Summary:
This is a simpler fix to the problem than the dominator approach in
http://reviews.llvm.org/D16251. It adds only values into the gather() while loop
that have been seen before.
The actual endless loop is in the constant compare gather() routine in
Utils/SimplifyCFG.cpp. The same value ret.0.off0.i is pushed back into the
queue:
%.ret.0.off0.i = or i1 %.ret.0.off0.i, %cmp10.i
Here is what happens at the IR level:
for.cond.i: ; preds = %if.end6.i,
%if.end.i54
%ix.0.i = phi i32 [ 0, %if.end.i54 ], [ %inc.i55, %if.end6.i ]
%ret.0.off0.i = phi i1 [false, %if.end.i54], [%.ret.0.off0.i, %if.end6.i] <<<
%cmp2.i = icmp ult i32 %ix.0.i, %11
br i1 %cmp2.i, label %for.body.i, label %LBJ_TmpSimpleNeedExt.exit
if.end6.i: ; preds = %for.body.i
%cmp10.i = icmp ugt i32 %conv.i, %add9.i
%.ret.0.off0.i = or i1 %ret.0.off0.i, %cmp10.i <<<
When if.end.i54 gets eliminated which removes the definition of ret.0.off0.i.
The result is the expression %.ret.0.off0.i = or i1 %.ret.0.off0.i, %cmp10.i
(Note the first ‘or’ operand is now %.ret.0.off0.i, and *NOT* %ret.0.off0.i).
And
now there is use of .ret.0.off0.i before a definition which triggers the
“endless” loop in gather():
while(!DFT.empty()) {
V = DFT.pop_back_val(); // V is .ret.0.off0.i
if (Instruction *I = dyn_cast<Instruction>(V)) {
// If it is a || (or && depending on isEQ), process the operands.
if (I->getOpcode() == (isEQ ? Instruction::Or : Instruction::And)) {
DFT.push_back(I->getOperand(1)); // This is now .ret.0.off0.i also
DFT.push_back(I->getOperand(0));
continue; // “endless loop” for .ret.0.off0.i
}
Reviewers: reames, ahatanak
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16839
llvm-svn: 259730
Summary:
LoopVersioning is a transform utility that transform passes can use to
run-time disambiguate may-aliasing accesses. I'd like to also expose as
pass to allow it to be unit-tested.
I am planning to add support for non-aliasing annotation in
LoopVersioning and I'd like to be able to write tests directly using
this pass.
(After that feature is done, the pass could also be used to look for
optimization opportunities that are hidden behind incomplete alias
information at compile time.)
The pass drives LoopVersioning in its default way which is to fully
disambiguate may-aliasing accesses no matter how many checks are
required.
Reviewers: hfinkel, ashutosh.nema, sbaranga
Subscribers: zzheng, mssimpso, llvm-commits, sanjoy
Differential Revision: http://reviews.llvm.org/D16612
llvm-svn: 259610
Please see include/llvm/Transforms/Utils/MemorySSA.h for a description
of MemorySSA, and what it does.
Differential Revision: http://reviews.llvm.org/D7864
llvm-svn: 259595
Summary: When splitting module with preserving locals, we currently do not handle case of global alias being separated with its aliasee.
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D16585
llvm-svn: 259075
This is a fix for:
https://llvm.org/bugs/show_bug.cgi?id=26308
With the switch to using the TTI cost model in:
http://reviews.llvm.org/rL228826
...it became possible to hit a zero-cost cycle of instructions (gep -> phi -> gep...),
so we need a cap for the recursion in DominatesMergePoint().
A recursion depth parameter was already added for a different reason in:
http://reviews.llvm.org/rL255660
...so we can just set a limit for it.
I pulled "10" out of the air and made it an independent parameter that we can play with.
It might be higher than it needs to be given the currently low default value of
PHINodeFoldingThreshold (2). That's the starting cost value that we enter the recursion
with, and most instructions have cost set to TCC_Basic (1), so I don't think we're going
to speculate more than 2 instructions with the current parameters.
As noted in the review and the TODO comment, we can do better than just limiting recursion
depth.
Differential Revision: http://reviews.llvm.org/D16637
llvm-svn: 258971
