Applied clang-tidy modernize-use-override over LLDB and added it to the LLDB .clang-tidy config.
Differential Revision: https://reviews.llvm.org/D123340
Move them to the only source file that included RegisterInfos_arm64.h
that actually used these variables.
This silences warnings like these:
In file included from lldb/source/Plugins/Instruction/ARM64/EmulateInstructionARM64.cpp:42:
lldb/source/Plugins/Process/Utility/RegisterInfos_arm64.h:790:35: warning: ‘g_register_infos_mte’ defined but not used [-Wunused-variable]
790 | static lldb_private::RegisterInfo g_register_infos_mte[] = {
| ^~~~~~~~~~~~~~~~~~~~
lldb/source/Plugins/Process/Utility/RegisterInfos_arm64.h:787:35: warning: ‘g_register_infos_pauth’ defined but not used [-Wunused-variable]
787 | static lldb_private::RegisterInfo g_register_infos_pauth[] = {
| ^~~~~~~~~~~~~~~~~~~~~~
Differential Revision: https://reviews.llvm.org/D123206
This silences warnings like this:
lldb/source/Core/DebuggerEvents.cpp: In member function ‘llvm::StringRef lldb_private::DiagnosticEventData::GetPrefix() const’:
lldb/source/Core/DebuggerEvents.cpp:55:1: warning: control reaches end of non-void function [-Wreturn-type]
55 | }
Differential Revision: https://reviews.llvm.org/D123203
Currently, all data buffers are assumed to be writable. This is a
problem on macOS where it's not allowed to load unsigned binaries in
memory as writable. To be more precise, MAP_RESILIENT_CODESIGN and
MAP_RESILIENT_MEDIA need to be set for mapped (unsigned) binaries on our
platform.
Binaries are mapped through FileSystem::CreateDataBuffer which returns a
DataBufferLLVM. The latter is backed by a llvm::WritableMemoryBuffer
because every DataBuffer in LLDB is considered to be writable. In order
to use a read-only llvm::MemoryBuffer I had to split our abstraction
around it.
This patch distinguishes between a DataBuffer (read-only) and
WritableDataBuffer (read-write) and updates LLDB to use the appropriate
one.
rdar://74890607
Differential revision: https://reviews.llvm.org/D122856
This patch handles the situation where the main thread exits (through
the SYS_exit syscall). In this case, the process as a whole continues
running until all of the other threads exit, or one of them issues an
exit_group syscall.
The patch consists of two changes:
- a moderate redesign of the handling of thread exit (WIFEXITED) events.
Previously, we were removing (forgetting) a thread once we received
the WIFEXITED (or WIFSIGNALED) event. This was problematic for the
main thread, since the main thread WIFEXITED event (which is better thought
of as a process-wide event) gets reported only after the entire process
exits. This resulted in deadlocks, where we were waiting for the
process to stop (because we still considered the main thread "live").
This patch changes the logic such that the main thread is removed as
soon as its PTRACE_EVENT_EXIT (the pre-exit) event is received. At
this point we can consider the thread gone (for most purposes). As a
corrolary, I needed to add special logic to catch process-wide exit
events in the cases where we don't have the main thread around.
- The second part of the patch is the removal of the assumptions that
the main thread is always available. This generally meant replacing
the uses of GetThreadByID(process_id) with GetCurrentThread() in
various process-wide operations (such as memory reads).
Differential Revision: https://reviews.llvm.org/D122716
With Scripted Processes, in order to create scripted threads, the blueprint
provides a dictionary that have each thread index as the key with the respective
thread instance as the pair value.
In Python, this is fine because a dictionary key can be of any type including
integer types:
```
>>> {1: "one", 2: "two", 10: "ten"}
{1: 'one', 2: 'two', 10: 'ten'}
```
However, when the python dictionary gets bridged to C++ we convert it to a
`StructuredData::Dictionary` that uses a `std::map<ConstString, ObjectSP>`
for storage.
Because `std::map` is an ordered container and ours uses the `ConstString`
type for keys, the thread indices gets converted to strings which makes the
dictionary sorted alphabetically, instead of numerically.
If the ScriptedProcess has 10 threads or more, it causes thread “10”
(and higher) to be after thread “1”, but before thread “2”.
In order to solve this, this sorts the thread info dictionary keys
numerically, before iterating over them to create ScriptedThreads.
rdar://90327854
Differential Revision: https://reviews.llvm.org/D122429
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Update the response schema of the TraceGetState packet and add
Intel PT specific response structure that contains the TSC conversion,
if it exists. The IntelPTCollector loads the TSC conversion and caches
it to prevent unnecessary calls to perf_event_open. Move the TSC conversion
calculation from Perf.h to TraceIntelPTGDBRemotePackets.h to remove
dependency on Linux specific headers.
Differential Revision: https://reviews.llvm.org/D122246
In ProcessMachCore::DoLoadCore when we have a standalone
binary and a 'main bin spec' LC_NOTE detailing the UUID and
load address, ProcessMachCore will do a (potentially slow)
lookup to try to find the binary and/or dSYM. For kernel and
userland corefile using 'main bin spec', we would follow the
normal schemes of locating them. DynamicLoaderDarwinKernel would
use the same (possibly expensive) calls to find the correct
binary. dyld by default would use the in-core-file binary image,
and so if the corefile didn't include the entire address space,
the LINKEDIT for dyld could be missing. This means we can't find
the dyld4::dyld_all_image_infos struct, which tells us where the
other binaries are loaded in memory.
Treat userland 'bin main spec' like we do standalone firmewares;
try the expensive checks to find the best dyld we can, before
falling back to using a memory module out of the corefile.
Also add a little TODO for myself in this load_standalone_binary
function that we should handle the case of a binary in the shared
cache correctly, creating a memory module in the corefile and
using the segment load addresses from that to set our segment
load addresses for the final binary.
rdar://89717101
- Add PerfEvent class to handle creating ring buffers and handle the resources associated with a perf_event
- Refactor IntelPT collection code to use this new API
- Add TSC to timestamp conversion logic with unittest
Differential Revision: https://reviews.llvm.org/D121734
- Rename IntelPTManager class and files to IntelPTCollector
- Change GetTimestampCounter API to general trace counter API,
GetCounter
Differential Revision: https://reviews.llvm.org/D121711
Report warnings and errors through events instead of printing directly
the to the debugger's error stream. By using events, IDEs such as Xcode
can report these issues in the UI instead of having them show up in the
debugger console.
The new diagnostic events are handled by the default event loop. If a
diagnostic is reported while nobody is listening for the new event
types, it is printed directly to the debugger's error stream.
Differential revision: https://reviews.llvm.org/D121511
This patch adds a getter for the process' system architecture. I went
with Process::GetSystemArchitecture to match
Platform::GetSystemArchitecture.
Differential revision: https://reviews.llvm.org/D121443
Don't overwrite the host architecture (obtained from qHostInfo) with the
process info (obtained from qProcessInfo).
Differential revision: https://reviews.llvm.org/D121442
This workaround is the source of an awkwared Process->Platform
dependency. While this could be solved in various ways (the only thing
we really use is the plugin name), it may be better to just remove it --
the workaround was added 10 years ago (43c555dfc), and the affected
debugservers were "old" even then, so hopefully they are not in use
anymore.
Differential Revision: https://reviews.llvm.org/D121305
This patch introduces a new way to load modules programatically with
Scripted Processes. To do so, the scripted process blueprint holds a
list of dictionary describing the modules to load, which their path or
uuid, load address and eventually a slide offset.
LLDB will fetch that list after launching the ScriptedProcess, and
iterate over each entry to create the module that will be loaded in the
Scripted Process' target.
The patch also refactors the StackCoreScriptedProcess test to stop
inside the `libbaz` module and make sure it's loaded correctly and that
we can fetch some variables from it.
rdar://74520238
Differential Revision: https://reviews.llvm.org/D120969
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch replaces the calls to ErrorWithMessage using the GetInterface
message by a call to the static method directly.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch changes the return value of Platform::GetName() to a
StringRef, and uses the opportunity (compile errors) to change some
callsites to use GetPluginName() instead. The two methods still remain
hardwired to return the same thing, but this will change once the ideas
in
<https://discourse.llvm.org/t/multiple-platforms-with-the-same-name/59594>
are implemented.
Differential Revision: https://reviews.llvm.org/D119146
All current callers set the argument to false. monitor_signals=true used
to be used in the Process plugins (which needed to know when the
debugged process gets a signal), but this implementation has several
serious issues, which means that individual process plugins now
orchestrate the monitoring of debugged processes themselves.
This allows us to simplify the implementation (no need to play with
process groups), and the interface (we only catch fatal events, so the
callback is always called just once).
Differential Revision: https://reviews.llvm.org/D120425
Accept a function object instead of a raw pointer. This avoids a bunch
of boilerplate typically needed to pass arguments to the thread
functions.
Differential Revision: https://reviews.llvm.org/D120321
This patch introduces a new type of ScriptedProcess: CrashLogScriptedProcess.
It takes advantage of lldb's crashlog parsers and Scripted Processes to
reconstruct a static debugging session with symbolicated stackframes, instead
of just dumping out everything in the user's terminal.
The crashlog command also has an interactive mode that only provide a
very limited experience. This is why this patch removes all the logic
for this interactive mode and creates CrashLogScriptedProcess instead.
This will fetch and load all the libraries that were used by the crashed
thread and re-create all the frames artificially.
rdar://88721117
Differential Revision: https://reviews.llvm.org/D119501
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This patch adds the ability for ScriptedThread to load artificial stack
frames. To do so, the interpreter instance can create a list that will
contain the frame index and its pc address.
Then, when the Scripted Process plugin stops, it will refresh its
Scripted Threads state by invalidating their register context and load
to list from the interpreter object and reconstruct each frame.
This patch also removes all of the default implementation for
`get_stackframes` from the derived ScriptedThread classes, and add the
interface code for the Scripted Thread Interface.
rdar://88721095
Differential Revision: https://reviews.llvm.org/D119388
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
This reverts commit 0df522969a.
Additional checks are added to fix the detection of the last memory region
in GetMemoryRegions or repeating the "memory region" command when the
target has non-address bits.
Normally you keep reading from address 0, looking up each region's end
address until you get LLDB_INVALID_ADDR as the region end address.
(0xffffffffffffffff)
This is what the remote will return once you go beyond the last mapped region:
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0001000000000000-0xffffffffffffffff) ---
Problem is that when we "fix" the lookup address, we remove some bits
from it. On an AArch64 system we have 48 bit virtual addresses, so when
we fix the end address of the [stack] region the result is 0.
So we loop back to the start.
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
[0x0000000000000000-0x0000000000400000) ---
To fix this I added an additional check for the last range.
If the end address of the region is different once you apply
FixDataAddress, we are at the last region.
Since the end of the last region will be the last valid mappable
address, plus 1. That 1 will be removed by the ABI plugin.
The only side effect is that on systems with non-address bits, you
won't get that last catch all unmapped region from the max virtual
address up to 0xf...f.
[0x0000fffff8000000-0x0000fffffffdf000) ---
[0x0000fffffffdf000-0x0001000000000000) rw- [stack]
<ends here>
Though in some way this is more correct because that region is not
just unmapped, it's not mappable at all.
No extra testing is needed because this is already covered by
TestMemoryRegion.py, I simply forgot to run it on system that had
both top byte ignore and pointer authentication.
This change has been tested on a qemu VM with top byte ignore,
memory tagging and pointer authentication enabled.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D115508
When LLVM_ENABLE_ZLIB is ON gdb-remote should link against ZLIB::ZLIB.
This fixes
```
/mnt/b/yoe/master/build/tmp/hosttools/ld: lib/liblldbPluginProcessGDBRemote.a(GDBRemoteCommunication.cpp.o): in function `lldb_private::process_gdb_remote::GDBRemoteCommunication::DecompressPacket() [clone .localalias]':
GDBRemoteCommunication.cpp:(.text._ZN12lldb_private18process_gdb_remote22GDBRemoteCommunication16DecompressPacketEv+0x59a): undefined reference to `inflateInit2_'
/mnt/b/yoe/master/build/tmp/hosttools/ld: GDBRemoteCommunication.cpp:(.text._ZN12lldb_private18process_gdb_remote22GDBRemoteCommunication16DecompressPacketEv+0x5af): undefined reference to `inflate'
```
Reviewed By: JDevlieghere, MaskRay
Differential Revision: https://reviews.llvm.org/D119186
Most of our code was including Log.h even though that is not where the
"lldb" log channel is defined (Log.h defines the generic logging
infrastructure). This worked because Log.h included Logging.h, even
though it should.
After the recent refactor, it became impossible the two files include
each other in this direction (the opposite inclusion is needed), so this
patch removes the workaround that was put in place and cleans up all
files to include the right thing. It also renames the file to LLDBLog to
better reflect its purpose.
Add Thread::GetSiginfo() and SBThread::GetSiginfo() methods to retrieve
the siginfo value from server.
Differential Revision: https://reviews.llvm.org/D118055
Add Thread::GetSiginfo() and SBThread::GetSiginfo() methods to retrieve
the siginfo value from server.
Differential Revision: https://reviews.llvm.org/D118055
This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
