Recommit r293585 that was reverted in r293611 with new fixes. The previous
issue was determined to be an overly aggressive AST visitor from forward
declared objects. The visitor will now only deeply visit certain Decl's and
only do a shallow information extraction from all other Decl's.
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taken from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 295284
Two functions that differ only in their enable_if attributes are
considered overloads, so we should check for those when we're trying to
figure out if two functions are mergeable.
We need to do the same thing for pass_object_size, as well. Looks like
that'll be a bit less trivial, since we sometimes do these merging
checks before we have pass_object_size attributes available (see the
merge checks in ASTDeclReader::VisitFunctionDecl that happen before we
read parameters, and merge checks in calls to ReadDeclAs<>()).
llvm-svn: 295252
Summary:
This adds associated constraints as a property of class templates.
An error is produced if redeclarations are not similarly constrained.
Reviewers: rsmith, faisalv, aaron.ballman
Reviewed By: rsmith
Subscribers: cfe-commits, nwilson
Differential Revision: https://reviews.llvm.org/D25674
llvm-svn: 294697
We're seeing what we believe are false positives. (It's hard to tell with the
available diagnostics, and I'm not sure how to reduce them yet).
I'll send Richard reproduction details offline.
djasper/chandlerc suggested this should be a warning for now, to make rolling it
out feasible.
llvm-svn: 293611
When objects are imported for modules, there is a chance that a name collision
will cause an ODR violation. Previously, only a small number of such
violations were detected. This patch provides a stronger check based on
AST nodes.
The information needed to uniquely identify an object is taked from the AST and
put into a one-dimensional byte stream. This stream is then hashed to give
a value to represent the object, which is stored with the other object data
in the module.
When modules are loaded, and Decl's are merged, the hash values of the two
Decl's are compared. Only Decl's with matched hash values will be merged.
Mismatch hashes will generate a module error, and if possible, point to the
first difference between the two objects.
The transform from AST to byte stream is a modified depth first algorithm.
Due to references between some AST nodes, a pure depth first algorithm could
generate loops. For Stmt nodes, a straight depth first processing occurs.
For Type and Decl nodes, they are replaced with an index number and only on
first visit will these nodes be processed. As an optimization, boolean
values are saved and stored together in reverse order at the end of the
byte stream to lower the ammount of data that needs to be hashed.
Compile time impact was measured at 1.5-2.0% during module building, and
negligible during builds without module building.
Differential Revision: https://reviews.llvm.org/D21675
llvm-svn: 293585
another declaration, ensure we actually serialize / deserialize that
declaration.
Before this patch, if another copy of the typedef were merged with the parsed
version, we would emit type information referring to the merged version and
consequently emit nothing about the parsed anonymous struct. This resulted in
us losing information, particularly the visible merged module set for the
parsed definition. Force that information to be emitted and to be loaded when
the typedef is used.
llvm-svn: 293219
Summary:
This patch changes TableGen-generated code in AttrPCHRead to call functions on
ASTRecordReader, instead of passing separate parameters to ASTReader. This is a
follow-up to r290217.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28007
llvm-svn: 292868
Summary:
This follows up to r290217, and makes functions on ASTRecordReader consistent
and valid style.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D28008
llvm-svn: 290236
Summary:
For ASTDeclReader and ASTStmtReader, every parameter "unsigned &Idx" ultimately
comes from a variable that is defined on the stack, next to the RecordData. This
change moves that index into the ASTRecordReader.
TypeLocReader cannot be transitioned, due to TableGen-generated code which calls
ASTReader::GetTypeSourceInfo.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27836
llvm-svn: 290217
This change introduces UsingPackDecl as a marker for the set of UsingDecls
produced by pack expansion of a single (unresolved) using declaration. This is
not strictly necessary (we just need to be able to map from the original using
declaration to its expansions somehow), but it's useful to maintain the
invariant that each declaration reference instantiates to refer to one
declaration.
This is a re-commit of r290080 (reverted in r290092) with a fix for a
use-after-lifetime bug.
llvm-svn: 290203
This change introduces UsingPackDecl as a marker for the set of UsingDecls
produced by pack expansion of a single (unresolved) using declaration. This is
not strictly necessary (we just need to be able to map from the original using
declaration to its expansions somehow), but it's useful to maintain the
invariant that each declaration reference instantiates to refer to one
declaration.
llvm-svn: 290080
Summary:
When reading an ASTRecord, each RecordData is logically contained within a
single ModuleFile, and global(er) state is contained by a single ASTReader. This
means that any operations that read from a RecordData and reference an ASTReader
or a ModuleFile, will always reference the same ASTReader or ModuleFile.
ASTRecordReader groups these together so that parameters don't need to be
duplicated ad infinitum. Most uses of the Idx variable seem to be redunant
aliases as well, but I'll leave that for now.
Reviewers: rsmith
Subscribers: cfe-commits
Differential Revision: https://reviews.llvm.org/D27784
llvm-svn: 289870
1) Merge and demote variable definitions when we find a redefinition in
MergeVarDecls, not only when we find one in AddInitializerToDecl (we only reach
the second case if it's the addition of the initializer itself that converts an
existing declaration into a definition).
2) When rebuilding a redeclaration chain for a variable, if we merge two
definitions together, mark the definitions as merged so the retained definition
is made visible whenever the demoted definition would have been.
Original commit message (from r283882):
[modules] PR28752: Do not instantiate variable declarations which are not visible.
Original patch by Vassil Vassilev! Changes listed above are mine.
llvm-svn: 284284
Original message:
"[modules] PR28752: Do not instantiate variable declarations which are not visible.
https://reviews.llvm.org/D24508
Patch developed in collaboration with Richard Smith!"
llvm-svn: 284008
Update storage sizes to fit the (past) changes in the VarDecl's data model.
Update some comments.
Patch partially reviewed by Richard Smith as part of https://reviews.llvm.org/D24508
llvm-svn: 283444
This diff reorders the fields of the class RedeclarableResult
to remove excessive padding.
Test plan: make -j8 check-clang
Differential revision: https://reviews.llvm.org/D24754
llvm-svn: 282322
This diff reorders the fields of ObjCCategoriesVisitor
to remove excessive padding.
Test plan: make -j8 check-clang
Differential revision: https://reviews.llvm.org/D24753
llvm-svn: 282318
In c++1z, static_assert is not required to have a StringLiteral message, where
previously it was required. Update the AST Reader to be able to handle a
null StringLiteral.
llvm-svn: 281286
When deserializing ObjCInterfaceDecl with definition data, if we already have
a definition, try to keep the definition invariant; also pull in the
categories even if it is not what getDefinition returns (this effectively
combines categories).
rdar://27926200
rdar://26708823
llvm-svn: 281119
In this mode, there is no need to load any module map and the programmer can
simply use "@import" syntax to load the module directly from a prebuilt
module path. When loading from prebuilt module path, we don't support
rebuilding of the module files and we ignore compatible configuration
mismatches.
rdar://27290316
Differential Revision: http://reviews.llvm.org/D23125
llvm-svn: 279096
Processing update records (and loading a module, in general) might trigger
unexpected calls to the ASTWriter (being a mutation listener). Now we have a
mechanism to suppress those calls to the ASTWriter but notify other possible
mutation listeners.
Fixes https://llvm.org/bugs/show_bug.cgi?id=28332
Patch by Cristina Cristescu and me.
Reviewed by Richard Smith (D21800).
llvm-svn: 276473
we first touch any part of that module. Instead, defer them until the first
time that module is (transitively) imported. The initializer step for a module
then recursively initializes modules that its own headers imported.
For example, this avoids running the <iostream> global initializer in programs
that don't actually use iostreams, but do use other parts of the standard
library.
llvm-svn: 276159
passed on the command line but never actually used. We consider a (top-level)
module to be used if any part of it is imported, either by the current
translation unit, or by any part of a top-level module that is itself used.
(Put another way, a module is used if an implicit modules build would have
loaded its .pcm file.)
llvm-svn: 275481
Replace inheriting constructors implementation with new approach, voted into
C++ last year as a DR against C++11.
Instead of synthesizing a set of derived class constructors for each inherited
base class constructor, we make the constructors of the base class visible to
constructor lookup in the derived class, using the normal rules for
using-declarations.
For constructors, UsingShadowDecl now has a ConstructorUsingShadowDecl derived
class that tracks the requisite additional information. We create shadow
constructors (not found by name lookup) in the derived class to model the
actual initialization, and have a new expression node,
CXXInheritedCtorInitExpr, to model the initialization of a base class from such
a constructor. (This initialization is special because it performs real perfect
forwarding of arguments.)
In cases where argument forwarding is not possible (for inalloca calls,
variadic calls, and calls with callee parameter cleanup), the shadow inheriting
constructor is not emitted and instead we directly emit the initialization code
into the caller of the inherited constructor.
Note that this new model is not perfectly compatible with the old model in some
corner cases. In particular:
* if B inherits a private constructor from A, and C uses that constructor to
construct a B, then we previously required that A befriends B and B
befriends C, but the new rules require A to befriend C directly, and
* if a derived class has its own constructors (and so its implicit default
constructor is suppressed), it may still inherit a default constructor from
a base class
llvm-svn: 274049
a base class via a using-declaration. If a class has a using-declaration
declaring either a constructor or an assignment operator, eagerly declare its
special members in case they need to displace a shadow declaration from a
using-declaration.
llvm-svn: 269398
Support OpenMP version 4.5 syntax for #pragma omp declare target.
Syntax:
#pragma omp declare target (extended-list) new-line
or
#pragma omp declare target clause[ [,] clause ... ] new-line
Where clause is one of the following:
to(extended-list)
link(list)
Differential Revision: http://reviews.llvm.org/D20011
llvm-svn: 268925
object in C. Rather than using the DeclContext (which is very slow because it
triggers us to build a lookup table for the DeclContext), use a separate map
from identifiers to decls for this case, containing only the ones we've
actually deserialized. For convenience, this map is implemented as an
IdentifierResolver.
llvm-svn: 268817
