CommandData breakpoint commands didn't know whether they were
Python or Command line commands, so they couldn't serialize &
deserialize themselves properly. Fix that.
I also changed the "breakpoint list" command to note in the output
when the commands are Python commands. Fortunately only one test
was relying on this explicit bit of text output.
llvm-svn: 282432
This change introduces optional marking of the column within a source
line where a thread is stopped. This marking will show up when the
source code for a thread stop is displayed, when the debug info
knows the column information, and if the optional column marking is
enabled.
There are two separate methods for handling the marking of the stop
column:
* via ANSI terminal codes, which are added inline to the source line
display. The default ANSI mark-up is to underline the column.
* via a pure text-based caret that is added in the appropriate column
in a newly-inserted blank line underneath the source line in
question.
There are some new options that control how this all works.
* settings set stop-show-column
This takes one of 4 values:
* ansi-or-caret: use the ANSI terminal code mechanism if LLDB
is running with color enabled; if not, use the caret-based,
pure text method (see the "caret" mode below).
* ansi: only use the ANSI terminal code mechanism to highlight
the stop line. If LLDB is running with color disabled, no
stop column marking will occur.
* caret: only use the pure text caret method, which introduces
a newly-inserted line underneath the current line, where
the only character in the new line is a caret that highlights
the stop column in question.
* none: no stop column marking will be attempted.
* settings set stop-show-column-ansi-prefix
This is a text format that indicates the ANSI formatting
code to insert into the stream immediately preceding the
column where the stop column character will be marked up.
It defaults to ${ansi.underline}; however, it can contain
any valid LLDB format codes, e.g.
${ansi.fg.red}${ansi.bold}${ansi.underline}
* settings set stop-show-column-ansi-suffix
This is the text format that specifies the ANSI terminal
codes to end the markup that was started with the prefix
described above. It defaults to: ${ansi.normal}. This
should be sufficient for the common cases.
Significant leg-work was done by Adrian Prantl. (Thanks, Adrian!)
differential review: https://reviews.llvm.org/D20835
reviewers: clayborg, jingham
llvm-svn: 282105
Serialize breakpoint names & the hardware_requested attributes.
Also added a few missing affordances to SBBreakpoint whose absence
writing the tests pointed out.
<rdar://problem/12611863>
llvm-svn: 282036
It looks like the message-content-retrieval aspect of DarwinLog
support is flaky, not just the regex match against it. Slightly
less frequently than the regex matching, I am seeing the
direct string-match variant of log-message-content matching
also fail.
Tracked by:
llvm.org/pr30299
rdar://28237450
llvm-svn: 281251
*** to conform to clang-format’s LLVM style. This kind of mass change has
*** two obvious implications:
Firstly, merging this particular commit into a downstream fork may be a huge
effort. Alternatively, it may be worth merging all changes up to this commit,
performing the same reformatting operation locally, and then discarding the
merge for this particular commit. The commands used to accomplish this
reformatting were as follows (with current working directory as the root of
the repository):
find . \( -iname "*.c" -or -iname "*.cpp" -or -iname "*.h" -or -iname "*.mm" \) -exec clang-format -i {} +
find . -iname "*.py" -exec autopep8 --in-place --aggressive --aggressive {} + ;
The version of clang-format used was 3.9.0, and autopep8 was 1.2.4.
Secondly, “blame” style tools will generally point to this commit instead of
a meaningful prior commit. There are alternatives available that will attempt
to look through this change and find the appropriate prior commit. YMMV.
llvm-svn: 280751
This reverts commit rL280668 because the register tests fail on i386
Linux.
I investigated a little bit what causes the failure - there are missing
registers when running 'register read -a'.
This is the output I got at the bottom:
"""
...
Memory Protection Extensions:
bnd0 = {0x0000000000000000 0x0000000000000000}
bnd1 = {0x0000000000000000 0x0000000000000000}
bnd2 = {0x0000000000000000 0x0000000000000000}
bnd3 = {0x0000000000000000 0x0000000000000000}
unknown:
2 registers were unavailable.
"""
Also looking at the packets exchanged between the client and server:
"""
...
history[308] tid=0x7338 < 19> send packet: $qRegisterInfo4a#d7
history[309] tid=0x7338 < 130> read packet:
$name:bnd0;bitsize:128;offset:1032;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:101;dwarf:101;#48
history[310] tid=0x7338 < 19> send packet: $qRegisterInfo4b#d8
history[311] tid=0x7338 < 130> read packet:
$name:bnd1;bitsize:128;offset:1048;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:102;dwarf:102;#52
history[312] tid=0x7338 < 19> send packet: $qRegisterInfo4c#d9
history[313] tid=0x7338 < 130> read packet:
$name:bnd2;bitsize:128;offset:1064;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:103;dwarf:103;#53
history[314] tid=0x7338 < 19> send packet: $qRegisterInfo4d#da
history[315] tid=0x7338 < 130> read packet:
$name:bnd3;bitsize:128;offset:1080;encoding:vector;format:vector-uint64;set:Memory
Protection Extensions;ehframe:104;dwarf:104;#54
history[316] tid=0x7338 < 19> send packet: $qRegisterInfo4e#db
history[317] tid=0x7338 < 76> read packet:
$name:bndcfgu;bitsize:64;offset:1096;encoding:vector;format:vector-uint8;#99
history[318] tid=0x7338 < 19> send packet: $qRegisterInfo4f#dc
history[319] tid=0x7338 < 78> read packet:
$name:bndstatus;bitsize:64;offset:1104;encoding:vector;format:vector-uint8;#8e
...
"""
The bndcfgu and bndstatus registers don't have the 'Memory Protections
Extension' set. I looked at the code and it seems that that is set
correctly.
So I'm not sure what's the problem or where does it come from.
Also there is a second failure related to something like this in the
tests:
"""
registerSet.GetName().lower()
"""
For some reason the registerSet.GetName() returns None.
llvm-svn: 280703
When a process stops due to a crash, we get the crashing instruction and the
crashing memory location (if there is one). From the user's perspective it is
often unclear what the reason for the crash is in a symbolic sense.
To address this, I have added new fuctionality to StackFrame to parse the
disassembly and reconstruct the sequence of dereferneces and offsets that were
applied to a known variable (or fuction retrn value) to obtain the invalid
pointer.
This makes use of enhancements in the disassembler, as well as new information
provided by the DWARF expression infrastructure, and is exposed through a
"frame diagnose" command. It is also used to provide symbolic information, when
available, in the event of a crash.
The algorithm is very rudimentary, and it needs a bunch of work, including
- better parsing for assembly, preferably with help from LLVM
- support for non-Apple platforms
- cleanup of the algorithm core, preferably to make it all work in terms of
Operands instead of register/offset pairs
- improvement of the GetExpressioPath() logic to make prettier expression
paths, and
- better handling of vtables.
I welcome all suggestios, improvements, and testcases.
llvm-svn: 280692
Summary:
The Intel(R) Memory Protection Extensions (Intel(R) MPX) associates pointers
to bounds, against which the software can check memory references to
prevent out of bound memory access.
This patch allows accessing the MPX registers:
* bnd0-3: 128-bit registers to hold the bound values,
* bndcfgu, bndstatus: 64-bit configuration registers,
This patch also adds read/write tests for the MPX registers in the register
command tests and adds a new subdirectory for MPX specific tests.
Signed-off-by: Valentina Giusti <valentina.giusti@intel.com>
Reviewers: labath, granata.enrico, lldb-commits, clayborg
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24187
llvm-svn: 280668
this is a resubmission of r280476. The problem with the original commit was that it was printing
out all numbers as signed, which was wrong for unsigned numbers with the MSB set. Fix that and
add a unit test covering that case.
llvm-svn: 280480
This reverts commit r280476 as it breaks several tests on i386. I was fixing an 32-bit
breakage, and I did not run the 32-bit test suite before submitting, oops.
llvm-svn: 280478
Summary:
It seems the original intention of the function was printing signed values in decimal format, and
unsigned values in hex (without the leading "0x"). However, signed and unsigned long were
exchanged, which lead to amusing test failures in TestMemoryFind.py.
Instead of just switching the two, I think we should just print everything in decimal here, as
the current behaviour is very confusing (especially when one does not request printing of types).
Nothing seems to depend on this behaviour except and we already have a way for the user to
request the format he wants when printing values for most commands (which presumably does not go
through this function).
I also add a unit tests for the function in question.
Reviewers: clayborg, granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24126
llvm-svn: 280476
the test fails for a very prosaic reason: `(const char *)0x1000` returns "4096" on x86_64 and
"1000" (without the "0x") on i386. I haven't tried other 32-bit arches, but I am guessing the
behaviour is the same. XFAIL until someone can get a chance to look at this.
llvm-svn: 280344
Summary:
- copies the new file in the cmake build
- adds an additional import statement
- marks the test as no-debug-info specific, as it seems to be testing a python feature
Reviewers: granata.enrico
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D24074
llvm-svn: 280261
This class enables one to easily write a synthetic child provider by writing a class that returns pairs of names and primitive Python values - the base class then converts those into LLDB SBValues
Comes with a test case
llvm-svn: 280172
This test was using a condition that would compare a variable against the register that would hold
it. It was failing with clang on arm64 because clang put the variable on the stack.
This is not a supportable way to write tests.
llvm-svn: 279345
Take 2, with missing cmake line fixed. Build tested on
Ubuntu 14.04 with clang-3.6.
See docs/structured_data/StructuredDataPlugins.md for details.
differential review: https://reviews.llvm.org/D22976
reviewers: clayborg, jingham
llvm-svn: 279202
debuggerd is a crash reporting system on android what installs some
signal handler for SEGV to print a backtrace in the log. Its behavior
breaks tests where the test tries to continue after a SEGV so we skip
them as this behavior isn't required on android anyway.
llvm-svn: 278510
It's always hard to remember when to include this file, and
when you do include it it's hard to remember what preprocessor
check it needs to be behind, and then you further have to remember
whether it's windows.h or win32.h which you need to include.
This patch changes the name to PosixApi.h, which is more appropriately
named, and makes it independent of any preprocessor setting.
There's still the issue of people not knowing when to include this,
because there's not a well-defined set of things it exposes other
than "whatever is missing on Windows", but at least this should
make it less painful to fix when problems arise.
This patch depends on LLVM revision r278170.
llvm-svn: 278177
This was a shadowed variable error from the big Expression Parser plugin-ification. I also
added a test case for this.
<rdar://problem/27682376>
llvm-svn: 277662
Summary:
There were places in the code, assuming(hardcoding) offsets
and types that were only valid for the x86_64 elf core file format.
The NT_PRSTATUS and NT_PRPSINFO structures are with the 64 bit layout.
I have reused them and parse i386 files manually, and fill them in the
same struct.
Also added some error handling during parsing that checks if the
available bytes in the buffer are enough to fill the structures.
The i386 core file test case now passes.
For reference on the structures layout, I generally used the
source of binutils (bfd, readelf)
Bug: https://llvm.org/bugs/show_bug.cgi?id=26947
Reviewers: labath
Subscribers: lldb-commits
Differential Revision: https://reviews.llvm.org/D22917
llvm-svn: 277140
This change breaks up the monolithic TestConcurrentEvents.py into a
separate subdir per test method. This allows them to run concurrently,
reduces the chance of a timeout occurring during normal operation, and
allows us to home in on any test methods that may be locking up.
This is step one in the process of squashing timeouts in these test
methods.
The reason for breaking each test method into its own file is to make it
very clear to us if there are a subset of the tests that do in fact lock
up frequently. This will limit how much hunting we need to do to
recreate it.
The reason for putting each file in a separate subdirectory is so that
our concurrent test runner can run multiple test files at the same time.
The unit of serialization in the LLDB test suite is the test directory,
so moving them into separate directories enables the test runner to do
more at the same time.
This change introduces usage of VPATH from gnu make. I use that to
facilitate keeping a single copy of the main.cpp in the parent
concurrent_events directory. Initially I had tried specifying the source
file as ../main.cpp, but our current makefile rules get confused by that
and then also build the output into the parent directory, which defeats
the ability to run each of the test methods concurrently. In the event
that not all systems support VPATH, I can do a bit of surgery on the
Makefile rules and attempt to make it smarter with regards to relative
paths to source files used in the build.
llvm-svn: 276478
review it for consistency, accuracy, and clarity. These changes attempt to
address all of the above while keeping the text relatively terse.
<rdar://problem/24868841>
llvm-svn: 275485
Summary:
The issue arises due to the wrong unwinder used for the first
stack frame, where the default unwinder returns erroneous frame
whereas the fallback would have given the correct frame had it
been used.
The following fix consists of two parts ->
1) The first part changes the unwinding strategy, earlier the
default unwinder was used to get 2 more stack frames and if it
failed a fallback unwinder was used. Now we try to obtain as many
frames (max 10) as we can get from default unwinder and also
fallback unwinder and use the one that gives more number of frames.
2) Normally unwindplans are assosciated with functions and the
row to be used is obtained from the offset (obtained from the low_pc
of the function symbol). Sometimes it may occur that the unwindplan
is assosciated to the complete Elf section in which case the offset
calculation would be wrong as the debugger uses the same offset originally
obtained from the function symbol. Hence this offset is recalculated.
Reviewers: tberghammer, lldb-commits, labath, jasonmolenda
Subscribers: jingham
Differential Revision: http://reviews.llvm.org/D21221
llvm-svn: 274750
Summary:
This patch fills in the implementation of GetMemoryRegions() on the Linux and Mac OS core file implementations of lldb_private::Process (ProcessElfCore::GetMemoryRegions and ProcessMachCore::GetMemoryRegions.) The GetMemoryRegions API was added under: http://reviews.llvm.org/D20565
The patch re-uses the m_core_range_infos list that was recently added to implement GetMemoryRegionInfo in both ProcessElfCore and ProcessMachCore to ensure the returned regions match the regions returned by Process::GetMemoryRegionInfo(addr_t load_addr, MemoryRegionInfo ®ion_info).
Reviewers: clayborg
Subscribers: labath, lldb-commits
Differential Revision: http://reviews.llvm.org/D21751
llvm-svn: 274741
