The attached patch adds eValueTypeVector to lldb_private::Value. The nested struct Vector is patterned after RegisterValue::m_data.buffer. This change to Value allows ClangExpressionDeclMap::LookupDecl to return vector register data for consumption by InterpreterStackFrame::ResolveValue. Note that ResolveValue was tweaked slightly to allocate enough memory for vector registers.
An immediate result of this patch is that "expr $xmm0" generates the same results on Linux as on the Mac, which is good enough for TestRegisters.py. In addition, the log of m_memory.PrintData(data_region.m_base, data_region.m_extent) shows that the register content has been resolved successfully. On the other hand, the output is glaringly empty:
runCmd: expr $xmm0
output: (unsigned char __attribute__((ext_vector_type(16)))) $0 = {}
Expecting sub string: vector_type
Matched
llvm-svn: 167033
so it could hold this information, and then used it to look up unfound names in the object pointer
if it exists. This gets "frame var" to work for unqualified references to ivars captured in blocks.
But the expression parser is ignoring this information still.
llvm-svn: 166860
enabled after we'd found a few bugs that were caused by shadowed
local variables; the most important issue this turned up was
a common mistake of trying to obtain a mutex lock for the scope
of a code block by doing
Mutex::Locker(m_map_mutex);
This doesn't assign the lock object to a local variable; it is
a temporary that has its dtor called immediately. Instead,
Mutex::Locker locker(m_map_mutex);
does what is intended. For some reason -Wshadow happened to
highlight these as shadowed variables.
I also fixed a few obivous and easy shadowed variable issues
across the code base but there are a couple dozen more that
should be fixed when someone has a free minute.
<rdar://problem/12437585>
llvm-svn: 165269
top-of-tree. Removed all local patches and llvm.zip.
The intent is that fron now on top-of-tree will
always build against LLVM/Clang top-of-tree, and
that problems building will be resolved as they
occur. Stable release branches of LLDB can be
constructed as needed and linked to specific release
branches of LLVM/Clang.
llvm-svn: 164563
not correctly store the contents of Objective-C
classes. This was due to a combination of
factors:
1) Types were only being completed if we were
looking inside them for specific ivars
(using FindExternalVisibleDeclsByName).
We now look the complete type up at every
FindExternalLexicalDecls.
2) Even if the types were completed properly,
ValueObjectConstResult overrode the type
of every ValueObject using the complete type
for its class from the debug information.
Superclasses of complete classes are not
guaranteed to be complete. Although "frame
variable" uses the debug information,
the expression parser does now piece together
complete types at every level (as described
in Bullet 1), so I provided a way for the
expression parser to prevent overriding.
3) Type sizes were being miscomputed by
ClangASTContext. It ignored the ISA pointer
and only counted fields. We now correctly
count the ISA in the size of an object.
<rdar://problem/12315386>
llvm-svn: 164333
information from the Objective-C runtime.
This patch takes the old AppleObjCSymbolVendor and
replaces it with an AppleObjCTypeVendor, which is
much more lightweight. Specifically, the SymbolVendor
needs to pretend that there is a backing symbol file
for the Types it vends, whereas a TypeVendor only
vends bare ClangASTTypes. These ClangASTTypes only
need to exist in an ASTContext.
The ClangASTSource now falls back to the runtime's
TypeVendor (if one exists) if the debug information
doesn't find a complete type for a particular
Objective-C interface. The runtime's TypeVendor
maintains an ASTContext full of types it knows about,
and re-uses the ISA-based type query information used
by the ValueObjects.
Currently, the runtime's TypeVendor doesn't provide
useful answers because we haven't yet implemented a
way to iterate across all ISAs contained in the target
process's runtime. That's the next step.
llvm-svn: 163651
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
Fixed an issue that could cause references the shared data for an object file to stay around longer than intended and could cause memory bloat when debugging multiple times.
llvm-svn: 161716
keep a shared pointer to their disassembler. This
is important for the LLVM-C disassembler because
it needs to lock its parent in order to disassemble
itself.
This means that every interface that returned a
Disassembler* needs to return a DisassemblerSP, so
that the instructions and any external owners share
the same reference count on the object. I changed
all clients to use this shared pointer, which also
plugged a few leaks.
<rdar://problem/12002822>
llvm-svn: 161123
Objective-C method names when looking for functions
in the top level or a namespace. Method names should
only be found via FindExternalLexicalDecls.
<rdar://problem/11711679>
llvm-svn: 160907
sel_getName() calls are generated for all Objective-C
selectors before static literals are moved to the
static allocation. This prevents errors of the form
Internal error [IRForTarget]: Couldn't change a static
reference to an Objective-C selector to a dynamic
reference
<rdar://problem/11331906>
llvm-svn: 160887
to returned by expressions, by removing the
__cxa_atexit call that would normally cause these
objects to be destroyed. This also prevents many
errors of the form
Couldn't rewrite one of the arguments of a function call
error: Couldn't materialize struct: Structure hasn't been laid out yet
<rdar://problem/11309402>
llvm-svn: 160596
Improved the error message when we can find a function in the current program by printing the demangled name.
Also added the ability to create lldb_private::Mangled instances with a ConstString when we already have a ConstString for a mangled or demangled name. Also added the ability to call SetValue with a ConstString and also without a boolean to indicate if the string is mangled where we will now auto-detect if the string is mangled.
llvm-svn: 160450
current symbol context is a C++ or Objective-C
instance method.
Specifically, ensure that we fetch information
on the current block, not just the current
function.
llvm-svn: 160195
- On iOS, we select the "apcs-gnu" ABI to match
what libraries expect.
- Literals are now allocated at their preferred
alignment, eliminating many alignment crashes.
llvm-svn: 158236
setting breakpoints. That's dangerous, since while we are setting a breakpoint,
the target might hit the dyld load notification, and start removing modules from
the list. This change adds a GetMutex accessor to the ModuleList class, and
uses it whenever we are accessing the target's ModuleList (as returned by GetImages().)
<rdar://problem/11552372>
llvm-svn: 157668
various other syntactic sugar work. Lambdas do
not due to some problems relocating code containing
lambdas. Rvalue references work when returned from
expressions, but need more testing.
llvm-svn: 156948
Fixed the DisassemblerLLVMC disassembler to parse more efficiently instead of parsing opcodes over and over. The InstructionLLVMC class now only reads the opcode in the InstructionLLVMC::Decode function. This can be done very efficiently for ARM and architectures that have fixed opcode sizes. For x64 it still calls the disassembler to get the byte size.
Moved the lldb_private::Instruction::Dump(...) function up into the lldb_private::Instruction class and it now uses the function that gets the mnemonic, operandes and comments so that all disassembly is using the same code.
Added StreamString::FillLastLineToColumn() to allow filling a line up to a column with a character (which is used by the lldb_private::Instruction::Dump(...) function).
Modified the Opcode::GetData() fucntion to "do the right thing" for thumb instructions.
llvm-svn: 156532
