I accidentally committed this diff with rL342147 because
I had applied D51964. We probably do need those checks,
but D51964 has tests and more discussion/motivation,
so they should be re-added with that patch.
llvm-svn: 342149
I don't have a test case for this, but it's motivated by
the discussion in D51964, and I've added TODO comments for
the better fix - move simplifications into instsimplify
because that's more efficient and reduces risk of infinite
loops in instcombine caused by transforms trying to do the
opposite folds.
In this case, we know that the transform that tries to move
'not' through min/max can be fooled by the multiple uses
of a value in another min/max, so try to squash the
foldSPFofSPF() patterns first.
llvm-svn: 342147
We previously only allowed truncs as sinks, but now allow them as
sources too. We do this by checking that the result type is the
narrow type that we're trying to optimise for.
Differential Revision: https://reviews.llvm.org/D51978
llvm-svn: 342141
Part of FixConsts wrongly assumes either a 8- or 16-bit constant
which can result in the wrong constants being generated during
promotion.
Differential Revision: https://reviews.llvm.org/D52032
llvm-svn: 342140
In r319995, we fixed the line table format to version 2 on Darwin
because dsymutil didn't yet understand the new format which caused test
failures for the LLDB bots. This has been resolved in the meantime so
there's no reason to keep this limitation.
rdar://problem/35968332
llvm-svn: 342136
If an argument was passed on the stack, this
was using the default alignment.
I'm not sure there's an observable change from this. This
was observable due to bugs in expansion of unaligned
loads and stores, but since that is fixed I don't think
this matters much.
llvm-svn: 342133
The Technical Reference Manuals for these two CPUs state that branching
to an unaligned 32-bit instruction incurs an extra pipeline reload
penalty. That's bad.
This also enables the optimization at -Os since it costs on average one
byte per loop in return for 1 cycle per iteration, which is pretty good
going.
llvm-svn: 342127
Summary:
This change has a number of fixes for FDR mode in compiler-rt along with
changes to the tooling handling the traces in llvm.
In the runtime, we do the following:
- Advance the "last record" pointer appropriately when writing the
custom event data in the log.
- Add XRAY_NEVER_INSTRUMENT in the rewinding routine.
- When collecting the argument of functions appropriately marked, we
should not attempt to rewind them (and reset the counts of functions
that can be re-wound).
In the tooling, we do the following:
- Remove the state logic in BlockIndexer and instead rely on the
presence/absence of records to indicate blocks.
- Move the verifier into a loop associated with each block.
Reviewers: mboerger, eizan
Subscribers: llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D51965
llvm-svn: 342122
This implements suggesting alternative mnemonics when an invalid one is
specified. For example `addru $9, $6, 17767` leads to the following
error message:
error: unknown instruction, did you mean: add, addiu, addu, maddu?
Differential revision: https://reviews.llvm.org/D40646
llvm-svn: 342119
Summary:
Previously we type legalized v2i32 div/rem by promoting to v2i64. But we don't support div/rem of vectors so op legalization would then scalarize it using i64 scalar ops since it doesn't know about the original promotion. 64-bit scalar divides on Intel hardware are known to be slow and in 32-bit mode they require a libcall.
This patch switches type legalization to do the scalarizing itself using i32.
It looks like the division by power of 2 optimization is still kicking in and leaving the code as a vector. The division by other constant optimization doesn't kick in pre type legalization since it ignores illegal types. And previously, after type legalization we scalarized the v2i64 since we don't have v2i64 MULHS/MULHU support.
Another option might be to widen v2i32 to v4i32 so we could do division by constant optimizations, but we'd have to be careful to only do that for constant divisors or we risk scalaring to 4 scalar divides.
Reviewers: RKSimon, spatel
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51325
llvm-svn: 342114
The `IMAGE_REL_ARM_BRANCH20T` applies only to a `b.w` instruction. A
thumb-2 `bl` should be relocated using a `IMAGE_REL_ARM_BRANCH24T`.
Correct the relocation that we emit in such a case.
Resolves PR38620! Based on the patch by Jordan Rhee!
llvm-svn: 342109
Shufflevector instructions in LLVM IR that extract a subset of elements
of a longer input into a shorter vector can be done using VECTOR_SHUFFLEs.
This will avoid expanding them into constly extracts and inserts.
llvm-svn: 342091
This is available on most platforms (Linux/Mac/Win/BSD) with no extra syscalls.
On other platforms (e.g. Solaris) we stat() if this information is requested.
This will allow switching clang's VFS to efficiently expose (path, type) when
traversing a directory. Currently it exposes an entire Status, but does so by
calling fs::status() on all platforms.
Almost all callers only need the path, and all callers only need (path, type).
Patch by sammccall (Sam McCall)
Differential Revision: https://reviews.llvm.org/D51918
llvm-svn: 342089
template methods in JITDylib out-of-line.
This also splits JITDylib::define into a pair of template methods, one taking an
lvalue reference and the other an rvalue reference. This simplifies the
templates at the cost of a small amount of code duplication.
llvm-svn: 342087
construction, a new convenience lookup method, and add-to layer methods.
ExecutionSession now creates a special 'main' JITDylib upon construction. All
subsequently created JITDylibs are added to the main JITDylib's search order by
default (controlled by the AddToMainDylibSearchOrder parameter to
ExecutionSession::createDylib). The main JITDylib's search order will be used in
the future to properly handle cross-JITDylib weak symbols, with the first
definition in this search order selected.
This commit also adds a new ExecutionSession::lookup convenience method that
performs a blocking lookup using the main JITDylib's search order, as this will
be a very common operation for clients.
Finally, new convenience overloads of IRLayer and ObjectLayer's add methods are
introduced that add the given program representations to the main dylib, which
is likely to be the common case.
llvm-svn: 342086
Summary:
rL341389 broke code with tied register operands in inline assembly. For
example, `asm("" : "=r"(var) : "0"(var));`
The code above specifies the input operand to be in the same register
with the output operand, tying the two register. This patch makes this
kind of code work again.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, eraman, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51991
llvm-svn: 342084
r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file. However, that is not the end of the story. FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.
The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream. The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.
The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy. MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.
Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.
Differential Revision: https://reviews.llvm.org/D51958
llvm-svn: 342080
Scalarization of a shuffle will break up the source vectors into individual
elements, and use them to assemble the resulting vector. An element type of
a legal vector type may not necessarily be a legal scalar type, so make
sure that the extracted values are extended to a legal scalar type.
llvm-svn: 342079
Move isa version determination into TargetParser.
Also switch away from target features to CPU string when
determining isa version. This fixes an issue when we
output wrong isa version in the object code when features
of a particular CPU are altered (i.e. gfx902 w/o xnack
used to result in gfx900).
llvm-svn: 342069
Summary:
It is sometimes important to check that some newly-computed value
is non-negative and only `n` bits wide (where `n` is a variable.)
There are **many** ways to check that:
https://godbolt.org/z/o4RB8D
The last variant seems best?
(I'm sure there are some other variations i haven't thought of..)
Let's handle the second variant first, since it is much simpler.
https://rise4fun.com/Alive/LYjYhttps://bugs.llvm.org/show_bug.cgi?id=38708
Reviewers: spatel, craig.topper, RKSimon
Reviewed By: spatel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51985
llvm-svn: 342067
Summary:
Match the ordering semantics of non-vector comparisons. For
floating point comparisons that do not correspond to instructions, the
tests check that some vector comparison instruction was emitted but do
not care about the full implementation.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D51765
llvm-svn: 342064
There's no advantage to this instruction unless you need to avoid touching other flag bits. It's encoding is longer, it can't fold an immediate, it doesn't write all the flags.
I don't think gcc will generate this instruction either.
Fixes PR38852.
Differential Revision: https://reviews.llvm.org/D51754
llvm-svn: 342059
Fix for https://bugs.llvm.org/show_bug.cgi?id=38912.
In GVNHoist::computeInsertionPoints() we iterate over the Value
Numbers and calculate the Iterated Dominance Frontiers without
clearing the IDFBlocks vector first. IDFBlocks ends up accumulating
an insane number of basic blocks, which bloats the compilation time
of SemaChecking.cpp with ubsan enabled.
Differential Revision: https://reviews.llvm.org/D51980
llvm-svn: 342055
This patch adds codegen support for the saving/restoring
V8-V23 for functions specified with the aarch64_vector_pcs
calling convention attribute, as added in patch D51477.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar, MatzeB
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51479
llvm-svn: 342049
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
The output of splitLargeGEPOffsets does not appear to be deterministic because
of the way that we iterate over a DenseMap. I've changed it to a MapVector for
consistent output.
The test here isn't particularly great, only showing a consmetic difference in
output. The original reproducer is much larger but show a diffierence in
instruction ordering, leading to different codegen.
Differential Revision: https://reviews.llvm.org/D51851
llvm-svn: 342043
Previously the alignment on the newly created switch table data was not set,
meaning that DataLayout::getPreferredAlignment was free to overalign it to 16
bytes. This causes unnecessary code bloat.
Differential Revision: https://reviews.llvm.org/D51800
llvm-svn: 342039
This patch refactors several parts of AArch64FrameLowering
so that it can be easily extended to support saving/restoring
of FPR128 (Q) registers.
Reviewers: t.p.northover, gberry, thegameg, rengolin, javed.absar
Reviewed By: thegameg
Differential Revision: https://reviews.llvm.org/D51478
llvm-svn: 342038
SMLAD and SMLALD instructions also come in the form of SMLADX and
SMLALDX which perform an exchange on their second operand. To support
this, more of the loads in the MAC candidates are compared for
sequential access and a boolean value has been added to BinOpChain.
AddMACCandiate has been refactored into a small pattern matching
state machine to reduce the amount of duplicated code, but also to
enable the matching to be more flexible. CreateParallelMACPairs now
iterates through all the candidates to find parallel ones.
Differential Revision: https://reviews.llvm.org/D51424
llvm-svn: 342033
This patch adds parsing support for the 'aarch64_vector_pcs'
calling convention attribute to calls and function declarations.
More information describing the vector ABI and procedure call standard
can be found here:
https://developer.arm.com/products/software-development-tools/\
hpc/arm-compiler-for-hpc/vector-function-abi
Reviewers: t.p.northover, rnk, rengolin, javed.absar, thegameg, SjoerdMeijer
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D51477
llvm-svn: 342030
Move the 2 classes out of LoopVectorize.cpp to make it easier to re-use
them for VPlan outside LoopVectorize.cpp
Reviewers: Ayal, mssimpso, rengolin, dcaballe, mkuper, hsaito, hfinkel, xbolva00
Reviewed By: rengolin, xbolva00
Differential Revision: https://reviews.llvm.org/D49488
llvm-svn: 342027
