Move computeLoopSafetyInfo, defined in Transforms/Utils/LoopUtils.h,
into the corresponding LoopUtils.cpp, as opposed to LICM where it resides
at the moment. This will allow other functions from Transforms/Utils
to reference it.
llvm-svn: 325151
The select may have been preventing a division by zero or INT_MIN/-1 so removing it might not be safe.
Fixes PR36362.
Differential Revision: https://reviews.llvm.org/D43276
llvm-svn: 325148
This keeps with our current usage of 'match' and is easier to see that
the optional NSW only applies in the non-constant operand case.
llvm-svn: 325140
Summary:
Reversed loads are handled as gathering. But we can just reshuffle
these values. Patch adds support for vectorization of reversed loads.
Reviewers: RKSimon, spatel, mkuper, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43022
llvm-svn: 325134
For basic blocks with instructions between the beginning of the block
and a call we have to duplicate the instructions before the call in all
split blocks and add PHI nodes for uses of the duplicated instructions
after the call.
Currently, the threshold for the number of instructions before a call
is quite low, to keep the impact on binary size low.
Reviewers: junbuml, mcrosier, davidxl, davide
Reviewed By: junbuml
Differential Revision: https://reviews.llvm.org/D41860
llvm-svn: 325126
We can use incremental dominator tree updates to avoid re-calculating
the dominator tree after interchanging 2 loops.
Reviewers: dmgreen, kuhar
Reviewed By: kuhar
Differential Revision: https://reviews.llvm.org/D43176
llvm-svn: 325122
Preserve debug info from a dead 'and' instruction with a constant.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D43163
llvm-svn: 325119
Making a width of GEP Index, which is used for address calculation, to be one of the pointer properties in the Data Layout.
p[address space]:size:memory_size:alignment:pref_alignment:index_size_in_bits.
The index size parameter is optional, if not specified, it is equal to the pointer size.
Till now, the InstCombiner normalized GEPs and extended the Index operand to the pointer width.
It works fine if you can convert pointer to integer for address calculation and all registered targets do this.
But some ISAs have very restricted instruction set for the pointer calculation. During discussions were desided to retrieve information for GEP index from the Data Layout.
http://lists.llvm.org/pipermail/llvm-dev/2018-January/120416.html
I added an interface to the Data Layout and I changed the InstCombiner and some other passes to take the Index width into account.
This change does not affect any in-tree target. I added tests to cover data layouts with explicitly specified index size.
Differential Revision: https://reviews.llvm.org/D42123
llvm-svn: 325102
This preserves an additional 581 unique source variables in a stage2
build of clang (according to `llvm-dwarfdump --statistics`). It
increases the size of the .debug_loc section by 0.1% (or 87139 bytes).
Differential Revision: https://reviews.llvm.org/D43255
llvm-svn: 325063
This replaces the bit-tracking based fold that did the same thing,
but it only worked for scalars and not directly.
There is no evidence in existing regression tests that the greater
power of bit-tracking was needed here, but we should be aware of
this potential loss of optimization.
llvm-svn: 325062
This is both a functional improvement for vectors and an
efficiency improvement for scalars. The existing code below
the new folds does the same thing for scalars, but in an
indirect and expensive way.
llvm-svn: 325048
According to `llvm-dwarfdump --statistics` this salvages 43 additional
unique source variables in a stage2 build of clang. It increases the
size of the .debug_loc section by 0.002% (or 2864 bytes).
Differential Revision: https://reviews.llvm.org/D43220
llvm-svn: 325035
For basic blocks with instructions between the beginning of the block
and a call we have to duplicate the instructions before the call in all
split blocks and add PHI nodes for uses of the duplicated instructions
after the call.
Currently, the threshold for the number of instructions before a call
is quite low, to keep the impact on binary size low.
Reviewers: junbuml, mcrosier, davidxl, davide
Reviewed By: junbuml
Differential Revision: https://reviews.llvm.org/D41860
llvm-svn: 325001
In cases where the OuterMostLoopLatchBI only has a single successor,
accessing the second successor will fail.
This fixes a failure when building the test-suite with loop-interchange
enabled.
Reviewers: mcrosier, karthikthecool, davide
Reviewed by: karthikthecool
Differential Revision: https://reviews.llvm.org/D42906
llvm-svn: 324994
We already try to salvage debug values from no-op bitcasts and inttoptr
instructions: we should handle ptrtoint instructions as well.
This saves an additional 24,444 debug values in a stage2 build of clang,
and (according to llvm-dwarfdump --statistics) provides an additional
289 unique source variables.
llvm-svn: 324982
Here are the number of additional debug values salvaged in a stage2
build of clang:
63 SALVAGE: MUL
1250 SALVAGE: SDIV
(No values were salvaged from `srem` instructions in this experiment,
but it's a simple case to handle so we might as well.)
llvm-svn: 324976
Here are the number of additional debug values salvaged in a stage2
build of clang:
1912 SALVAGE: ASHR
405 SALVAGE: LSHR
249 SALVAGE: SHL
llvm-svn: 324975
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
InstCombine pass to cease using the deprecated MemoryIntrinsic::getAlignment() method, and
instead we use the separate getSourceAlignment and getDestAlignment APIs to simplify
the source and destination alignment attributes separately.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653, rL324654, rL324773, rL324774,
rL324781, rL324784, rL324955 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
Reviewers: majnemer, bollu, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D42871
llvm-svn: 324960
It caused assertion failure
Assertion failed: (!DD.IsLambda && !MergeDD.IsLambda && "faked up lambda definition?"), function MergeDefinitionData, file /Users/buildslave/jenkins/workspace/clang-stage1-configure-RA/llvm/tools/clang/lib/Serialization/ASTReaderDecl.cpp, line 1675.
on the second stage build bots.
llvm-svn: 324932
This is similar to the instsimplify fold added with D42385
( rL323716 )
...but this can't be in instsimplify because we're creating/morphing
a different instruction.
llvm-svn: 324927
Update BlockColors after splitting predecessors. Do not allow splitting
EHPad for sinking when the BlockColors is not empty, so we can
simply assign predecessor's color to the new block.
Fixes PR36184
llvm-svn: 324916
Summary:
For better vectorization result we should take into consideration the
cost of the user insertelement instructions when we try to
vectorize sequences that build the whole vector. I.e. if we have the
following scalar code:
```
<Scalar code>
insertelement <ScalarCode>, ...
```
we should consider the cost of the last `insertelement ` instructions as
the cost of the scalar code.
Reviewers: RKSimon, spatel, hfinkel, mkuper
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42657
llvm-svn: 324893
Add GraphTraits definitions to the FunctionSummary and ModuleSummaryIndex classes. These GraphTraits will be used to construct find SCC's in ThinLTO analysis passes.
llvm-svn: 324854
The related cases for (X * Y) / X were handled in rL124487.
https://rise4fun.com/Alive/6k9
The division in these tests is subsequently eliminated by existing instcombines
for 1/X.
llvm-svn: 324843
Summary:
If -pass-remarks=loop-vectorize, atomic ops will be seen by
analyzeInterleaving(), even though canVectorizeMemory() == false. This
is because we are requesting extra analysis instead of bailing out.
In such a case, we end up with a Group in both Load- and StoreGroups,
and then we'll try to access freed memory when traversing LoadGroups after having had released the Group when iterating over StoreGroups.
The fix is to include mayWriteToMemory() when validating that two
instructions are the same kind of memory operation.
Reviewers: mssimpso, davidxl
Reviewed By: davidxl
Subscribers: hsaito, fhahn, llvm-commits
Differential Revision: https://reviews.llvm.org/D43064
llvm-svn: 324786
Extend salvageDebugInfo to preserve the debug info from a dead 'or'
with a constant.
Patch by Ismail Badawi!
Differential Revision: https://reviews.llvm.org/D43129
llvm-svn: 324764
Summary:
For symbols that has linkonce_odr linkage and unnamed_addr, it can be
auto hide by linker to avoid weak external symbols. Teach ThinLTO to
perform auto hide so it can safely promote linkonce_odr to weak symbols
without breaking this nice property.
Reviewers: tejohnson, mehdi_amini
Reviewed By: tejohnson
Subscribers: inglorion, eraman, rnk, pcc, llvm-commits
Differential Revision: https://reviews.llvm.org/D43130
llvm-svn: 324757
Summary:
Kernel addresses have 0xFF in the most significant byte.
A tag can not be pushed there with OR (tag << 56);
use AND ((tag << 56) | 0x00FF..FF) instead.
Reviewers: kcc, andreyknvl
Subscribers: srhines, llvm-commits, hiraditya
Differential Revision: https://reviews.llvm.org/D42941
llvm-svn: 324691
Summary:
This change is part of step five in the series of changes to remove alignment argument from
memcpy/memmove/memset in favour of alignment attributes. In particular, this changes the
DataFlowSanitizer pass to cease using the old get/setAlignment() API of MemoryIntrinsic
in favour of getting source & dest specific alignments through the new API.
Steps:
Step 1) Remove alignment parameter and create alignment parameter attributes for
memcpy/memmove/memset. ( rL322965, rC322964, rL322963 )
Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing
source and dest alignments. ( rL323597 )
Step 3) Update Clang to use the new IRBuilder API. ( rC323617 )
Step 4) Update Polly to use the new IRBuilder API. ( rL323618 )
Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API,
and those that use use MemIntrinsicInst::[get|set]Alignment() to use [get|set]DestAlignment()
and [get|set]SourceAlignment() instead. ( rL323886, rL323891, rL324148, rL324273, rL324278,
rL324384, rL324395, rL324402, rL324626, rL324642, rL324653 )
Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the
MemIntrinsicInst::[get|set]Alignment() methods.
Reference
http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.htmlhttp://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html
llvm-svn: 324654
