Our LLDB parser didn't correctly handle archives of all flavors on different systems, it currently only correctly handled BSD archives, normal and thin, on macOS, but I noticed that it was getting incorrect information when decoding a variety of archives on linux. There were subtle changes to how names were encoded that we didn't handle correctly and we also didn't set the result of GetObjectSize() correctly as there was some bad math. This didn't matter when exracting .o files from .a files for LLDB because the size was always way too big, but it was big enough to at least read enough bytes for each object within the archive.
This patch does the following:
- switch over to use LLVM's archive parser and avoids previous code duplication
- remove values from ObjectContainerBSDArchive::Object that we don't use like:
- uid
- gid
- mode
- fix ths ObjectContainerBSDArchive::Object::file_size value to be correct
- adds tests to test that we get the correct module specifications
Differential Revision: https://reviews.llvm.org/D159408
We ran into a case where shared libraries would fail to load in some processes on linux. The issue turned out to be if the main executable or a shared library defined a symbol named "_r_debug", then it would cause problems once the executable that contained it was loaded into the process. The "_r_debug" structure is currently found by looking through the .dynamic section in the main executable and finding the DT_DEBUG entry which points to this structure. The dynamic loader will update this structure as shared libraries are loaded and LLDB watches the contents of this structure as the dyld breakpoint is hit. Currently we expect the "state" in this structure to change as things happen. An issue comes up if someone defines another "_r_debug" struct in their program:
```
r_debug _r_debug;
```
If this code is included, a new "_r_debug" structure is created and it causes problems once the executable is loaded. This is because of the way symbol lookups happen in linux: they use the shared library list in the order it created and the dynamic loader is always last. So at some point the dynamic loader will start updating this other copy of "_r_debug", yet LLDB is only watching the copy inside of the dynamic loader.
Steps that show the problem are:
- lldb finds the "_r_debug" structure via the DT_DEBUG entry in the .dynamic section and this points to the "_r_debug" in ld.so
- ld.so modifies its copy of "_r_debug" with "state = eAdd" before it loads the shared libraries and calls the dyld function that LLDB has set a breakpoint on and we find this state and do nothing (we are waiting for a state of eConsistent to tell us the shared libraries have been fully loaded)
- ld.so loads the main executable and any dependent shared libraries and wants to update the "_r_debug" structure, but it now finds "_r_debug" in the a.out program and updates the state in this other copy
- lldb hits the notification breakpoint and checks the ld.so copy of "_r_debug" which still has a state of "eAdd". LLDB wants the new "eConsistent" state which will trigger the shared libraries to load, but it gets stale data and doesn't do anyhing and library load is missed. The "_r_debug" in a.out has the state set correctly, but we don't know which "_r_debug" is the right one.
The new fix detects the two "eAdd" states and loads shared libraries and will emit a log message in the "log enable lldb dyld" log channel which states there might be multiple "_r_debug" structs.
The correct solution is that no one should be adding a duplicate "_r_debug" symbol to their binaries, but we have programs that are doing this already and since it can be done, we should be able to work with this and keep debug sessions working as expected. If a user #includes the <link.h> file, they can just use the existing "_r_debug" structure as it is defined in this header file as "extern struct r_debug _r_debug;" and no local copies need to be made.
If your ld.so has debug info, you can easily see the duplicate "_r_debug" structs by doing:
```
(lldb) target variable _r_debug --raw
(r_debug) _r_debug = {
r_version = 1
r_map = 0x00007ffff7e30210
r_brk = 140737349972416
r_state = RT_CONSISTENT
r_ldbase = 0
}
(r_debug) _r_debug = {
r_version = 1
r_map = 0x00007ffff7e30210
r_brk = 140737349972416
r_state = RT_ADD
r_ldbase = 140737349943296
}
(lldb) target variable &_r_debug
(r_debug *) &_r_debug = 0x0000555555601040
(r_debug *) &_r_debug = 0x00007ffff7e301e0
```
And if you do a "image lookup --address <addr>" in the addresses, you can see one is in the a.out and one in the ld.so.
Adding more logging to print out the m_previous and m_current Rendezvous structures to make things more clear. Also added a log when we detect multiple eAdd states in a row to detect this problem in logs.
Differential Revision: https://reviews.llvm.org/D158583
Before the addition of the process "Shadow Listener" you could only have one
Listener observing the Process Broadcaster. That was necessary because fetching the
Process event is what switches the public process state, and for the execution
control logic to be manageable you needed to keep other listeners from causing
this to happen before the main process control engine was ready.
Ismail added the notion of a "ShadowListener" - which allowed you ONE
extra process listener. This patch inverts that setup by designating the
first listener as primary - and giving it priority in fetching events.
Differential Revision: https://reviews.llvm.org/D157556
(motivated by test failures after D157058)
With D157058 the base template for `std::char_traits` was removed from
libc++. Quoting the release notes:
```
The base template for ``std::char_traits`` has been removed. If you are using
``std::char_traits`` with types other than ``char``, ``wchar_t``, ``char8_t``,
``char16_t``, ``char32_t`` or a custom character type for which you
specialized ``std::char_traits``, your code will no longer work.
```
This patch simply removes all such instantiations to make sure the
tests that run against the latest libc++ version pass.
One could try testing the existence of this base template from within
the test source files but this doesn't seem like something we want
support.
Differential Revision: https://reviews.llvm.org/D157636
7e229217f4 did live processes, this does
core files. Pretty simple, there is an NT_ARM_TLS note that contains
at least tpidr, and on systems with the Scalable Matrix Extension (SME), tpidr2
as well.
tpidr2 will be handled in future patches for SME support.
This NT_ARM_TLS note has always been present but it seems convenient to
handle it as "optional" inside of LLDB. We'll probably want the flexibility
when supporting tpidr2.
Normally the C library would set tpidr but all our test sources build
without it. So I've updated the neon test program to write to tpidr
and regenerated the corefile.
I've removed the LLDB_PTRACE_NT_ARM_TLS that was unused, we get
what we need from llvm's defs instead.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D156118
The previous patch D156367 introduced a test debugging thin archive with one of the linked object file missing. It actually failed on green dragon build bots. I put up a speculative fix (4520cc066b) that only fixed the symptom of it.
The actual root cause was that the timestamps were set to 0 when creating the thin archive
Makefile command
```
llvm-ar -rcsDT libfoo-thin.a a.o b.o
```
Where the flag "[D] - use zero for timestamps and uids/gids (default)" according to the llvm-ar help
Use "[U] - use actual timestamps and uids/gids" fixed the timestamp
Now the test is actually getting error from missing object file linked to the thin archive instead of the mismatched timestamp.
This means removing one of the object file a.o should only result in failure breaking at `a()`; breaking at `b()` should work just fine.
Test Plan:
All 4 test cases passed
```
▶ ./bin/llvm-lit -vv ../llvm-project/lldb/test/API/functionalities/archives/TestBSDArchives.py
llvm-lit: /Users/wanyi/local/llvm-project/lldb/test/API/lit.cfg.py:173: warning: Could not set a default per-test timeout. Requires the Python psutil module but it could not be found. Try installing it via pip or via your operating system's package manager.
-- Testing: 1 tests, 1 workers --
PASS: lldb-api :: functionalities/archives/TestBSDArchives.py (1 of 1)
Testing Time: 8.07s
Passed: 1
1 warning(s) in tests
```
Differential Revision: https://reviews.llvm.org/D156564
Recently we've observed lldb crashes caused by missing object file linked to a thin archive (.a) files. The crash is due to a missing NULL check in the code when looking for child object file referred by the thin archive. Malformed archive file should not crash LLDB. Instead, it should report the error and continue.
New error message will look like the following
```
error: libfoo.a(__objects__/foo/barAppDelegate.mm.o) failed to load objfile for path/to/libfoo.a.
Debugging will be degraded for this module.
```
Test Plan:
llvm-lit test
```
./bin/llvm-lit -sv ../llvm-project/lldb/test/API/functionalities/archives/TestBSDArchives.py
```
Test without code change will error out with LLDB crash
```
--
Command Output (stderr):
--
PASS: LLDB (~/llvm-upstream/Debug/bin/clang-arm64) :: test (TestBSDArchives.BSDArchivesTestCase)
PASS: LLDB (~/llvm-upstream/Debug/bin/clang-arm64) :: test_frame_var_errors_when_archive_missing (TestBSDArchives.BSDArchivesTestCase)
FAIL: LLDB (~/llvm-upstream/Debug/bin/clang-arm64) :: test_frame_var_errors_when_mtime_mistmatch_for_object_in_archive (TestBSDArchives.BSDArchivesTestCase)
PLEASE submit a bug report to https://github.com/llvm/llvm-project/issues/ and include the crash backtrace.
Stack dump:
0. HandleCommand(command = "b a")
1. HandleCommand(command = "breakpoint set --name 'a'")
Fatal Python error: Segmentation fault
Current thread 0x00000001f7b99e00 (most recent call first):
File "~/llvm-upstream/Debug/bin/LLDB.framework/Resources/Python/lldb/__init__.py", line 3270 in HandleCommand
File "~/llvm-upstream/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 2070 in runCmd
File "~/llvm-upstream/llvm-project/lldb/packages/Python/lldbsuite/test/lldbtest.py", line 2421 in expect
File "~/llvm-upstream/llvm-project/lldb/test/API/functionalities/archives/TestBSDArchives.py", line 156 in test_frame_var_errors_when_thin_archive_malformed
...
```
Differential Revision: https://reviews.llvm.org/D156367
Similar to ae316ac66f for
QEMU_(UN)SET_ENV.
The iteration order of StringMap is not guaranteed to be deterministic.
Sort the entries to give deterministic packets for the tests added by
D108018.
Summary:
[lldb][x86_64] This patch adds fs_base/gs_base support for Linux x86_64.
Originally, I plan to split the diff into two parts, one to refactoring lldb_xxx_x86_64 => x86_64::lldb_xxx across code base and the other one for adding fs_base/gs_base, but it turns out to be a non-trivial effort to split and very error prone so I decided to keep a single diff to get feedback.
GDB supports fs_base/gs_base registers while LLDB does not. Since both linux coredump note section and ptrace
supports them it is a missing feature.
For context, this is a required feature to support getting pthread pointer on linux from both live and dump debugging.
See thread below for details:
https://discourse.llvm.org/t/how-to-get-pthread-pointer-from-lldb/70542/2?u=jeffreytan81
Implementation wise, we have initially tried `#ifdef` approach to reuse the code but it is introducing very tricky bugs and proves
hard to maintain. Instead the diff completely separates the registers between x86_64 and x86_64_with_base so that non-linux related
implementations can use x86_64 registers while linux uses x86_64_with_base.
Here are the list of changes done in the patch:
* Registers in lldb-x86-register-enums.h are separated into two: x86_64 and x86_64_with_base
* fs_base/gs_base are added into x86_64_with_base
* All linux files are change to use x86_64::lldb_xxx => x86_64_with_base::lldb_xxx
* Support linux elf-core:
* A new RegisterContextLinuxCore_x86_64 class is added for ThreadElfCore
* RegisterContextLinuxCore_x86_64 overrides and uses its own register set supports fs_base/gs_base
* RegisterInfos_x86_64_with_base/RegisterInfos_x86_64_with_base_shared ared added to provide g_contained_XXX/g_invalidate_XXX and RegInfo related code sharing.
* `RegisterContextPOSIX_x86 ::m_gpr_x86_64` seems to be unused so I removed it.
* `NativeRegisterContextDBReg_x86::GetDR()` is overridden in `NativeRegisterContextLinux_x86_64` to make watchpoint work.
Reviewers:clayborg,labath,jingham,jdoerfert,JDevlieghere,kusmour,GeorgeHuyubo
Subscribers:
Tasks:
Tags:
Differential Revision: https://reviews.llvm.org/D155256
It was implicitly assumning that "/" would have no files in it, only
directories. That's not true, for instance on macOS if you've navigated
to the root directory in the Finder...
Since we're assuming everything we check against is a directory, then we
need to filter the completion for that coming in.
Fix a crash when trying to complete an ambiguous subcommand. Take `set s
tar` for example: for the subcommand `s` there's ambiguity between set
and show. Pressing TAB after this input currently crashes LLDB. The
problem is that we're trying to complete `tar` but give up at `s`
because of the ambiguity. LLDB doesn't expect the completed string to be
shorter than the current string and crashes when trying to eliminate the
common prefix.
rdar://111848598
Differential revision: https://reviews.llvm.org/D154643
Previously the following would crash:
(lldb) run
Process 2594053 launched: '/tmp/test.o' (aarch64)
Process 2594053 exited with status = 0 (0x00000000)
(lldb) register read <tab>
As the completer assumed that the execution context would always
have a register context. After a program has finished, it does not.
Split out the generic parts of the test from the x86 specific tests,
and added "register info" to both.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D154413
Running this on Amazon Ubuntu the final backtrace is:
```
(lldb) thread backtrace
* thread #1, name = 'a.out', stop reason = breakpoint 1.1
* frame #0: 0x0000aaaaaaaa07d0 a.out`func_c at main.c:10:3
frame #1: 0x0000aaaaaaaa07c4 a.out`func_b at main.c:14:3
frame #2: 0x0000aaaaaaaa07b4 a.out`func_a at main.c:18:3
frame #3: 0x0000aaaaaaaa07a4 a.out`main(argc=<unavailable>, argv=<unavailable>) at main.c:22:3
frame #4: 0x0000fffff7b373fc libc.so.6`___lldb_unnamed_symbol2962 + 108
frame #5: 0x0000fffff7b374cc libc.so.6`__libc_start_main + 152
frame #6: 0x0000aaaaaaaa06b0 a.out`_start + 48
```
This causes the test to fail because of the extra ___lldb_unnamed_symbol2962 frame
(an inlined function?).
To fix this, strictly check all the frames in main.c then for the rest
just check we find __libc_start_main and _start in that order regardless
of other frames in between.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D154204
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Differential Revision: https://reviews.llvm.org/D152848
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This teaches DumpRegisterInfo to generate a table from the register
flags type. It just calls a method on RegisterFlags.
As such, the extra tests are minimal and only show that the intergration
works. Exhaustive formatting tests are done with RegisterFlags itself.
Example:
```
(lldb) register info cpsr
Name: cpsr
Size: 4 bytes (32 bits)
In sets: general (index 0)
| 31 | 30 | 29 | 28 | 27-26 | 25 | 24 | 23 | 22 | 21 | 20 | 19-13 | 12 | 11-10 | 9 | 8 | 7 | 6 | 5 | 4 | 3-2 | 1 | 0 |
|----|----|----|----|-------|-----|-----|-----|-----|----|----|-------|------|-------|---|---|---|---|---|-----|-----|---|----|
| N | Z | C | V | | TCO | DIT | UAO | PAN | SS | IL | | SSBS | | D | A | I | F | | nRW | EL | | SP |
```
LLDB limits the max terminal width to 80 chars by default.
So to get that full width output you will need to change the "term-width"
setting to something higher.
Reviewed By: jasonmolenda
Differential Revision: https://reviews.llvm.org/D152918
This patch should address the failure of TestStackCoreScriptedProcess
that is happening specifically on x86_64.
It turns out that in 1370a1cb5b, I changed the way we extract integers
from a `StructuredData::Dictionary` and in order to get a stop info from
the scripted process, we call a method that returns a `SBStructuredData`
containing the stop reason data.
TestStackCoreScriptedProcess` was failing specifically on x86_64 because
the stop info dictionary contains the signal number, that the `Scripted
Thread` was trying to extract as a signed integer where it was actually
parsed as an unsigned integer. That caused `GetValueForKeyAsInteger` to
return the default value parameter, `LLDB_INVALID_SIGNAL_NUMBER`.
This patch address the issue by extracting the signal number with the
appropriate type and re-enables the test.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch skips both `test_completion_target_create_from_root_dir`
introduced in `e896612` and `target-label.test` introduced in `1e82b20`
since I don't have a windows machine to try to accomodate the filesystem
path style differences for these tests to pass.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should fix path completion starting from the root directory.
To do so, this patch adds a special case when setting the search
directory when the completion buffer points to the root directory.
Differential Revision: https://reviews.llvm.org/D152013
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch should allow the user to set specific auto-completion type
for their custom commands.
To do so, we had to hoist the `CompletionType` enum so the user can
access it and add a new completion type flag to the CommandScriptAdd
Command Object.
So now, the user can specify which completion type will be used with
their custom command, when they register it.
This also makes the `crashlog` custom commands use disk-file completion
type, to browse through the user file system and load the report.
Differential Revision: https://reviews.llvm.org/D152011
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
When printing the root of a value, if it's a reference its children are unconditionally
printed - in contrast to pointers whose children are only printed if a sufficient
pointer depth is given.
However, the children are printed even when there's a summary provider that says not to.
If a summary provider exists, this change consults it to determine if children should be
printed.
For example, given a variable of type `std::string &`, this change has the following
effect:
Before:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten": {
__r_ = {
std::__1::__compressed_pair_elem<std::__1::basic_string<char, std::__1::char_traits<char>, std::__1::allocator<char> >::__rep, 0, false> = {
__value_ = {
= {
__l = (__data_ = "one two three four five six seven eight nine ten", __size_ = 48, __cap_ = 64, __is_long_ = 1)
__s = (__data_ = "@\0p\U00000001\0`\0\00\0\0\0\0\0\0\0@", __padding_ = "\x80t<", __size_ = '\0', __is_long_ = '\x01')
__r = {
__words ={...}
}
}
}
}
}
}
```
After:
```
(lldb) p string_ref
(std::string &) string_ref = "one two three four five six seven eight nine ten"
```
rdar://73248786
Differential Revision: https://reviews.llvm.org/D151748
Since 44bb442 LLDB TestVarPath.py crashes on AArch64 Windows.
GetValueForVariablePath function seems to be triggering the crash.
This patch disable parts of this test causing the crash.
Bug reported upstream:
https://github.com/llvm/llvm-project/issues/62983
Following tests are now passing on LLDB AArch64 Windows buildbot:
lldb-api :: commands/expression/deleting-implicit-copy-constructor/TestDeletingImplicitCopyConstructor.py
lldb-api :: functionalities/data-formatter/data-formatter-categories/TestDataFormatterCategories.py
lldb-api :: lang/cpp/constructors/TestCppConstructors.py
lldb-api :: lang/cpp/namespace/TestNamespace.py
lldb-api :: lang/cpp/this_class_type_mixing/TestThisClassTypeMixing.py
https://lab.llvm.org/buildbot/#/builders/219/builds/3012
This patch removes XFAIL decorator from all of the above.
Differential Revision: https://reviews.llvm.org/D151268
The x86_64 macOS CI bot is failing because this test
times out. It was marked as expectedFail earlier today,
but that's not considered a fail so the CI runs are
red. Skipping it on Darwin for now until Ismail can
look into it.
This reverts commit 429e748395 since it
didn't address the test failures on GreenDragon.
This patch will mark the tests as expected to fail until I can reproduce
the issue and find a solution.
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This is an ongoing series of commits that are reformatting our Python
code. Reformatting is done with `black` (23.1.0).
If you end up having problems merging this commit because you have made
changes to a python file, the best way to handle that is to run `git
checkout --ours <yourfile>` and then reformat it with black.
RFC: https://discourse.llvm.org/t/rfc-document-and-standardize-python-code-style
Differential revision: https://reviews.llvm.org/D151460
This mimicks the implementation of the libstdcpp std::unique_ptr
formatter.
This has been attempted several years ago in
`0789722d85cf1f1fdbe2ffb2245ea0ba034a9f94` but was reverted in
`e7dd3972094c2f2fb42dc9d4d5344e54a431e2ce`.
The difference to the original patch is that we now maintain
a `$$dereference$$` member and we only store weak pointers
to the other children inside the synthetic frontend. This is
what the libc++ formatters do to prevent the recursion mentioned
in the revert commit.
This patch moves the `PassthroughScriptedProcess` & `PassthroughScriptedThread`
classes from the `interactive_scripted_process.py` test implementation
to the `lldb.scripted_process` python module.
This class is very versatile so it makes more sense to ship it with the
python module to make it easier for our adopters to derive their class
from it instead of copying it.
During the "migration", I've also noticed some bugs in the
`PassthroughScriptedThread` creation and update, so I also fixed that as
part of this patch.
Differential Revision: https://reviews.llvm.org/D151044
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch adds support to eStopReasonTrace to Scripted Threads.
This is necessary when using a Scrited Process with a Scripted Thread
Plan to report a special thread stop reason to the thread plan.
rdar://109425542
Differential Revision: https://reviews.llvm.org/D151043
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
This patch refactors the `StructuredData::Integer` class to make it
templated, makes it private and adds 2 public specialization for both
`int64_t` & `uint64_t` with a public type aliases, respectively
`SignedInteger` & `UnsignedInteger`.
It adds new getter for signed and unsigned interger values to the
`StructuredData::Object` base class and changes the implementation of
`StructuredData::Array::GetItemAtIndexAsInteger` and
`StructuredData::Dictionary::GetValueForKeyAsInteger` to support signed
and unsigned integers.
This patch also adds 2 new `Get{Signed,Unsigned}IntegerValue` to the
`SBStructuredData` class and marks `GetIntegerValue` as deprecated.
Finally, this patch audits all the caller of `StructuredData::Integer`
or `StructuredData::GetIntegerValue` to use the proper type as well the
various tests that uses `SBStructuredData.GetIntegerValue`.
rdar://105575764
Differential Revision: https://reviews.llvm.org/D150485
Signed-off-by: Med Ismail Bennani <ismail@bennani.ma>
TestInterruptBacktrace.py started randonmly failing on Arm/Linux
buildbot since e19387e693. This patch marks it skipped.
Differential Revision: https://reviews.llvm.org/D150236
Since 44363f2 various tests have started passing but introduced a
expression evaluation failure in TestDataFormatterSynthVal.py.
This patch marks the expression evaluation part as skipped while rest
of the test passes.
This patch aslo introduces a new helper isAArch64Windows in lldbtest.py.
This patch fixes libstdc++ data formatter for reference/pointer to std::string.
The failure testcases are added which succeed with the patch.
Differential Revision: https://reviews.llvm.org/D150313
wrong answer. Plus, it's useful in some places to have a way to force
the full stack to be created even in the face of
interruption. Moreover, most of the time when you're just getting
frames, you don't need to know the number of frames in the stack to
start with. You just keep calling
Thread::GetStackFrameAtIndex(index++) and when you get a null
StackFrameSP back, you're done. That's also more amenable to
interruption if you are doing some work frame by frame.
So this patch makes GetStackFrameCount always return the full count,
suspending interruption. I also went through all the places that use
GetStackFrameCount to make sure that they really needed the full stack
walk. In many cases, they did not. For instance frame select -r 10 was
getting the number of frames just to check whether cur_frame_idx + 10
was within the stack. It's better in that case to see if that frame
exists first, since that doesn't force a full stack walk, and only
deal with walking off the end of the stack if it doesn't...
I also added a test for some of these behaviors.
Differential Revision: https://reviews.llvm.org/D150236
Add suport for MASK style watchpoints on AArch64 in debugserver
on Darwin systems, for watching power-of-2 sized memory ranges.
More work needed in lldb before this can be exposed to the user
(because they will often try watching memory ranges that are not
exactly power-of-2 in size/alignment) but this is the first part
of adding that capability.
Differential Revision: https://reviews.llvm.org/D149792
rdar://108233371
This patch add or removes XFAIL decorator from various tests which were marked
xfail for windows.
since 44363f2 various tests have started passing but introduced a couple of new failures.
Weight is in favor of new XPasses and I have removed XFail decorator from them. Also
some new tests have started failing for which we need to file separate bugs. I have
marked them xfail for now and will add the bug id after investigating the issue.
Differential Revision: https://reviews.llvm.org/D149235
